- 09 Jan, 2014 3 commits
-
-
Ben Myers authored
A set of fixes which makes sure we are taking the ilock whenever accessing the extent list. This was associated with "Access to block zero" messages which may result in extent list corruption.
-
Ben Myers authored
A bugfix for an off-by-one in the remote attribute verifier, and a fix for a missing destroy_work_on_stack() in the allocation worker.
-
Chuansheng Liu authored
In case CONFIG_DEBUG_OBJECTS_WORK is defined, it is needed to call destroy_work_on_stack() which frees the debug object to pair with INIT_WORK_ONSTACK(). Signed-off-by:
Liu, Chuansheng <chuansheng.liu@intel.com> Reviewed-by:
Ben Myers <bpm@sgi.com> Signed-off-by:
-
- 06 Jan, 2014 1 commit
-
-
Jie Liu authored
With CRC check is enabled, if trying to set an attributes value just equal to the maximum size of XATTR_SIZE_MAX would cause the v3 remote attr write verification procedure failure, which would yield the back trace like below: <snip> XFS (sda7): Internal error xfs_attr3_rmt_write_verify at line 191 of file fs/xfs/xfs_attr_remote.c <snip> Call Trace: [<ffffffff816f0042>] dump_stack+0x45/0x56 [<ffffffffa0d99c8b>] xfs_error_report+0x3b/0x40 [xfs] [<ffffffffa0d96edd>] ? _xfs_buf_ioapply+0x6d/0x390 [xfs] [<ffffffffa0d99ce5>] xfs_corruption_error+0x55/0x80 [xfs] [<ffffffffa0dbef6b>] xfs_attr3_rmt_write_verify+0x14b/0x1a0 [xfs] [<ffffffffa0d96edd>] ? _xfs_buf_ioapply+0x6d/0x390 [xfs] [<ffffffffa0d97315>] ? xfs_bdstrat_cb+0x55/0xb0 [xfs] [<ffffffffa0d96edd>] _xfs_buf_ioapply+0x6d/0x390 [xfs] [<ffffffff81184cda>] ? vm_map_ram+0x31a/0x460 [<ffffffff81097230>] ? wake_up_state+0x20/0x20 [<ffffffffa0d97315>] ? xfs_bdstrat_cb+0x55/0xb0 [xfs] [<ffffffffa0d9726b>] xfs_buf_iorequest+0x6b/0xc0 [xfs] [<ffffffffa0d97315>] xfs_bdstrat_cb+0x55/0xb0 [xfs] [<ffffffffa0d97906>] xfs_bwrite+0x46/0x80 [xfs] [<ffffffffa0dbfa94>] xfs_attr_rmtval_set+0x334/0x490 [xfs] [<ffffffffa0db84aa>] xfs_attr_leaf_addname+0x24a/0x410 [xfs] [<ffffffffa0db8893>] xfs_attr_set_int+0x223/0x470 [xfs] [<ffffffffa0db8b76>] xfs_attr_set+0x96/0xb0 [xfs] [<ffffffffa0db13b2>] xfs_xattr_set+0x42/0x70 [xfs] [<ffffffff811df9b2>] generic_setxattr+0x62/0x80 [<ffffffff811e0213>] __vfs_setxattr_noperm+0x63/0x1b0 [<ffffffff81307afe>] ? evm_inode_setxattr+0xe/0x10 [<ffffffff811e0415>] vfs_setxattr+0xb5/0xc0 [<ffffffff811e054e>] setxattr+0x12e/0x1c0 [<ffffffff811c6e82>] ? final_putname+0x22/0x50 [<ffffffff811c708b>] ? putname+0x2b/0x40 [<ffffffff811cc4bf>] ? user_path_at_empty+0x5f/0x90 [<ffffffff811bdfd9>] ? __sb_start_write+0x49/0xe0 [<ffffffff81168589>] ? vm_mmap_pgoff+0x99/0xc0 [<ffffffff811e07df>] SyS_setxattr+0x8f/0xe0 [<ffffffff81700c2d>] system_call_fastpath+0x1a/0x1f Tests: setfattr -n user.longxattr -v `perl -e 'print "A"x65536'` testfile This patch fix it to check the remote EA size is greater than the XATTR_SIZE_MAX rather than more than or equal to it, because it's valid if the specified EA value size is equal to the limitation as per VFS setxattr interface. Signed-off-by:Jie Liu <jeff.liu@oracle.com> Reviewed-by:
Mark Tinguely <tinguely@sgi.com> Signed-off-by:
-
- 18 Dec, 2013 12 commits
-
-
Christoph Hellwig authored
Make sure that xfs_bmapi_read has the ilock held in some way, and that xfs_bmapi_write, xfs_bmapi_delay, xfs_bunmapi and xfs_iread_extents are called with the ilock held exclusively. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
-
Christoph Hellwig authored
We might not have read in the extent list at this point, so make sure we take the ilock exclusively if we have to do so. Signed-off-by:
-
Christoph Hellwig authored
We might not have read in the extent list at this point, so make sure we take the ilock exclusively if we have to do so. Signed-off-by:
-
Christoph Hellwig authored
We might not have read in the extent list at this point, so make sure we take the ilock exclusively if we have to do so. Signed-off-by:
-
Christoph Hellwig authored
We might not have read in the extent list at this point, so make sure we take the ilock exclusively if we have to do so. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Ben Myers authored
Although it was removed in commit 051e7cd4, ilock needs to be taken in xfs_readdir because we might have to read the extent list in from disk. This keeps other threads from reading from or writing to the extent list while it is being read in and is still in a transitional state. This has been associated with "Access to block zero" messages on directories with large numbers of extents resulting from excessive filesytem fragmentation, as well as extent list corruption. Unfortunately no test case at this point. Signed-off-by:
-
Christoph Hellwig authored
Equivalent to xfs_ilock_data_map_shared, except for the attribute fork. Make xfs_getbmap use it if called for the attribute fork instead of xfs_ilock_data_map_shared. Signed-off-by:
-
Christoph Hellwig authored
Make it clear that we're only locking against the extent map on the data fork. Also clean the function up a little bit. Signed-off-by:
-
Christoph Hellwig authored
We can just use xfs_iunlock without any loss of clarity. Signed-off-by:
-
Christoph Hellwig authored
Both the inode number and the generation do not change on a live inode. Signed-off-by:
-
Ben Myers authored
-
- 17 Dec, 2013 9 commits
-
-
Dave Chinner authored
If we are doing aysnc writeback of metadata, we can get write errors but have nobody to report them to. At the moment, we simply attempt to reissue the write from io completion in the hope that it's a transient error. When it's not a transient error, the buffer is stuck forever in this loop, and we cannot break out of it. Eventually, unmount will hang because the AIL cannot be emptied and everything goes downhill from them. To solve this problem, only retry the write IO once before aborting it. We don't throw the buffer away because some transient errors can last minutes (e.g. FC path failover) or even hours (thin provisioned devices that have run out of backing space) before they go away. Hence we really want to keep trying until we can't try any more. Because the buffer was not cleaned, however, it does not get removed from the AIL and hence the next pass across the AIL will start IO on it again. As such, we still get the "retry forever" semantics that we currently have, but we allow other access to the buffer in the mean time. Meanwhile the filesystem can continue to modify the buffer and relog it, so the IO errors won't hang the log or the filesystem. Now when we are pushing the AIL, we can see all these "permanent IO error" buffers and we can issue a warning about failures before we retry the IO. We can also catch these buffers when unmounting an issue a corruption warning, too. Signed-off-by:
-
Dave Chinner authored
When swalloc is specified as a mount option, allocations are supposed to be aligned to the stripe width rather than the stripe unit of the underlying filesystem. However, it does not do this. What the implementation does is round up the allocation size to a stripe width, hence ensuring that all allocations span a full stripe width. It does not, however, ensure that that allocation is aligned to a stripe width, and hence the allocations can span multiple underlying stripes and so still see RMW cycles for things like direct IO on MD RAID. So, if the swalloc mount option is set, change the allocation alignment in xfs_bmap_btalloc() to use the stripe width rather than the stripe unit. Signed-off-by:
-
Christoph Hellwig authored
The xfsbdstrat helper is a small but useless wrapper for xfs_buf_iorequest that handles the case of a shut down filesystem. Most of the users have private, uncached buffers that can just be freed in this case, but the complex error handling in xfs_bioerror_relse messes up the case when it's called without a locked buffer. Remove xfsbdstrat and opencode the error handling in the callers. All but one can simply return an error and don't need to deal with buffer state, and the one caller that cares about the buffer state could do with a major cleanup as well, but we'll defer that to later. Signed-off-by:
-
Dave Chinner authored
The function xfs_bmap_isaeof() is used to indicate that an allocation is occurring at or past the end of file, and as such should be aligned to the underlying storage geometry if possible. Commit 27a3f8f2 ("xfs: introduce xfs_bmap_last_extent") changed the behaviour of this function for empty files - it turned off allocation alignment for this case accidentally. Hence large initial allocations from direct IO are not getting correctly aligned to the underlying geometry, and that is cause write performance to drop in alignment sensitive configurations. Fix it by considering allocation into empty files as requiring aligned allocation again. Signed-off-by:
-
Namjae Jeon authored
When I tried to send the patches to XFS Maintainers, I got returned mail included delivery fail message for Dave's mail. Maybe, Dave Chinner mail address is incorrect. I try to fix it correctly. Signed-off-by:
Namjae Jeon <namjae.jeon@samsung.com> Reviewed-by:
-
Jie Liu authored
xfs_quota(8) will hang up if trying to turn group/project quota off before the user quota is off, this could be 100% reproduced by: # mount -ouquota,gquota /dev/sda7 /xfs # mkdir /xfs/test # xfs_quota -xc 'off -g' /xfs <-- hangs up # echo w > /proc/sysrq-trigger # dmesg SysRq : Show Blocked State task PC stack pid father xfs_quota D 0000000000000000 0 27574 2551 0x00000000 [snip] Call Trace: [<ffffffff81aaa21d>] schedule+0xad/0xc0 [<ffffffff81aa327e>] schedule_timeout+0x35e/0x3c0 [<ffffffff8114b506>] ? mark_held_locks+0x176/0x1c0 [<ffffffff810ad6c0>] ? call_timer_fn+0x2c0/0x2c0 [<ffffffffa0c25380>] ? xfs_qm_shrink_count+0x30/0x30 [xfs] [<ffffffff81aa3306>] schedule_timeout_uninterruptible+0x26/0x30 [<ffffffffa0c26155>] xfs_qm_dquot_walk+0x235/0x260 [xfs] [<ffffffffa0c059d8>] ? xfs_perag_get+0x1d8/0x2d0 [xfs] [<ffffffffa0c05805>] ? xfs_perag_get+0x5/0x2d0 [xfs] [<ffffffffa0b7707e>] ? xfs_inode_ag_iterator+0xae/0xf0 [xfs] [<ffffffffa0c22280>] ? xfs_trans_free_dqinfo+0x50/0x50 [xfs] [<ffffffffa0b7709f>] ? xfs_inode_ag_iterator+0xcf/0xf0 [xfs] [<ffffffffa0c261e6>] xfs_qm_dqpurge_all+0x66/0xb0 [xfs] [<ffffffffa0c2497a>] xfs_qm_scall_quotaoff+0x20a/0x5f0 [xfs] [<ffffffffa0c2b8f6>] xfs_fs_set_xstate+0x136/0x180 [xfs] [<ffffffff8136cf7a>] do_quotactl+0x53a/0x6b0 [<ffffffff812fba4b>] ? iput+0x5b/0x90 [<ffffffff8136d257>] SyS_quotactl+0x167/0x1d0 [<ffffffff814cf2ee>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff81abcd19>] system_call_fastpath+0x16/0x1b It's fine if we turn user quota off at first, then turn off other kind of quotas if they are enabled since the group/project dquot refcount is decreased to zero once the user quota if off. Otherwise, those dquots refcount is non-zero due to the user dquot might refer to them as hint(s). Hence, above operation cause an infinite loop at xfs_qm_dquot_walk() while trying to purge dquot cache. This problem has been around since Linux 3.4, it was introduced by: [ b84a3a96 xfs: remove the per-filesystem list of dquots ] Originally we will release the group dquot pointers because the user dquots maybe carrying around as a hint via xfs_qm_detach_gdquots(). However, with above change, there is no such work to be done before purging group/project dquot cache. In order to solve this problem, this patch introduces a special routine xfs_qm_dqpurge_hints(), and it would release the group/project dquot pointers the user dquots maybe carrying around as a hint, and then it will proceed to purge the user dquot cache if requested. Cc: stable@vger.kernel.org Signed-off-by:
-
Jie Liu authored
For CRC enabled v5 super block, change a file's ownership can simply trigger an ASSERT failure at xfs_setattr_nonsize() if both group and project quota are enabled, i.e, [ 305.337609] XFS: Assertion failed: !XFS_IS_PQUOTA_ON(mp), file: fs/xfs/xfs_iops.c, line: 621 [ 305.339250] Kernel BUG at ffffffffa0a7fa32 [verbose debug info unavailable] [ 305.383939] Call Trace: [ 305.385536] [<ffffffffa0a7d95a>] xfs_setattr_nonsize+0x69a/0x720 [xfs] [ 305.387142] [<ffffffffa0a7dea9>] xfs_vn_setattr+0x29/0x70 [xfs] [ 305.388727] [<ffffffff811ca388>] notify_change+0x1a8/0x350 [ 305.390298] [<ffffffff811ac39d>] chown_common+0xfd/0x110 [ 305.391868] [<ffffffff811ad6bf>] SyS_fchownat+0xaf/0x110 [ 305.393440] [<ffffffff811ad760>] SyS_lchown+0x20/0x30 [ 305.394995] [<ffffffff8170f7dd>] system_call_fastpath+0x1a/0x1f [ 305.399870] RIP [<ffffffffa0a7fa32>] assfail+0x22/0x30 [xfs] This fix adjust the assertion to check if the super block support both quota inodes or not. Signed-off-by:
-
Jie Liu authored
After the previous fix, there still has another ASSERT failure if turning off any type of quota while fsstress is running at the same time. Backtrace in this case: [ 50.867897] XFS: Assertion failed: XFS_IS_GQUOTA_ON(mp), file: fs/xfs/xfs_qm.c, line: 2118 [ 50.867924] ------------[ cut here ]------------ ... <snip> [ 50.867957] Kernel BUG at ffffffffa0b55a32 [verbose debug info unavailable] [ 50.867999] invalid opcode: 0000 [#1] SMP [ 50.869407] Call Trace: [ 50.869446] [<ffffffffa0bc408a>] xfs_qm_vop_create_dqattach+0x19a/0x2d0 [xfs] [ 50.869512] [<ffffffffa0b9cc45>] xfs_create+0x5c5/0x6a0 [xfs] [ 50.869564] [<ffffffffa0b5307c>] xfs_vn_mknod+0xac/0x1d0 [xfs] [ 50.869615] [<ffffffffa0b531d6>] xfs_vn_mkdir+0x16/0x20 [xfs] [ 50.869655] [<ffffffff811becd5>] vfs_mkdir+0x95/0x130 [ 50.869689] [<ffffffff811bf63a>] SyS_mkdirat+0xaa/0xe0 [ 50.869723] [<ffffffff811bf689>] SyS_mkdir+0x19/0x20 [ 50.869757] [<ffffffff8170f7dd>] system_call_fastpath+0x1a/0x1f [ 50.869793] Code: 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 <snip> [ 50.870003] RIP [<ffffffffa0b55a32>] assfail+0x22/0x30 [xfs] [ 50.870050] RSP <ffff88002941fd60> [ 50.879251] ---[ end trace c93a2b342341c65b ]--- We're hitting the ASSERT(XFS_IS_*QUOTA_ON(mp)) in xfs_qm_vop_create_dqattach(), however the assertion itself is not right IMHO. While performing quota off, we firstly clear the XFS_*QUOTA_ACTIVE bit(s) from struct xfs_mount without taking any special locks, see xfs_qm_scall_quotaoff(). Hence there is no guarantee that the desired quota is still active. Signed-off-by:
-
Mark Tinguely authored
Fix the leak of kernel memory in xfs_dir2_node_removename() when xfs_dir2_leafn_remove() returns an error code. Signed-off-by:
-
- 13 Dec, 2013 15 commits
-
-
Ben Myers authored
-
Jie Liu authored
Use xfs_icluster_size_fsb() in xfs_imap(). Signed-off-by:
Dave Chinner <david@fromorbit.com>
-
Jie Liu authored
Use xfs_icluster_size_fsb() in xfs_ifree_cluster(), rename variable ninodes to inodes_per_cluster, the latter is more meaningful. Signed-off-by:
-
Jie Liu authored
Use xfs_icluster_size_fsb() in xfs_ialloc_inode_init(), rename variable ninodes to inodes_per_cluster, the latter is more meaningful. Signed-off-by:
-
Jie Liu authored
Use xfs_icluster_size_fsb() in xfs_bulkstat(), make the related variables more meaningful and remove an unused variable nimask from it. Signed-off-by:
-
Jie Liu authored
Introduce a common routine xfs_icluster_size_fsb() to calculate and return the number of file system blocks per inode cluster. Signed-off-by:
-
Jie Liu authored
Get rid of XFS_IALLOC_BLOCKS() marcos, use mp->m_ialloc_blks directly. Signed-off-by:
-
Jie Liu authored
Get rid of XFS_INODE_CLUSTER_SIZE() macros, use mp->m_inode_cluster_size directly. Signed-off-by:
-
Jie Liu authored
Get rid of XFS_IALLOC_INODES() marcos, use mp->m_ialloc_inos directly. Signed-off-by:
-
Christoph Hellwig authored
This one doesn't save a whole lot of memory, but still makes the code simpler. Signed-off-by:
-
Christoph Hellwig authored
No need to keep the dquot log format around all the time, we can easily generate it at iop_format time. Signed-off-by:
-
Christoph Hellwig authored
No need to keep the inode log format around all the time, we can easily generate it at iop_format time. Signed-off-by:
-
Christoph Hellwig authored
With the new iop_format scheme there is no need to have a temporary buffer to format logged extents into, we can do so directly into the CIL. This also allows to remove the shortcut for big endian systems that probably hasn't gotten a lot of test coverage for a long time. Signed-off-by:
-
Christoph Hellwig authored
Instead of setting up pointers to memory locations in iop_format which then get copied into the CIL linear buffer after return move the copy into the individual inode items. This avoids the need to always have a memory block in the exact same layout that gets written into the log around, and allow the log items to be much more flexible in their in-memory layouts. The only caveat is that we need to properly align the data for each iovec so that don't have structures misaligned in subsequent iovecs. Note that all log item format routines now need to be careful to modify the copy of the item that was placed into the CIL after calls to xlog_copy_iovec instead of the in-memory copy. Signed-off-by:
-
Christoph Hellwig authored
Add a helper to abstract out filling the log iovecs in the log item format handlers. This will allow us to change the way we do the log item formatting more easily. The copy in the name is a bit confusing for now as it just assigns a pointer and lets the CIL code perform the copy, but that will change soon. Signed-off-by:
-
