- 15 Jun, 2017 4 commits
-
-
git://anongit.freedesktop.org/git/drm-miscDave Airlie authored
Cross-subsystem Changes: - dt-bindings: add vendor prefix for NLT Technologies, Ltd. (Lucas) - dt-bindings: Add support for samsung s6e3hf2 panel (Hoegeun) Core Changes: - Add drm_panel_bridge to avoid connector boilerplate in drivers (Eric) - Trival fixes for dupe forward decl and reduce scope of variable (Dawid) Driver Changes: - dw-hdmi: Use mode_valid hook on bridge instead of connector (Jose) - vc4,atmel-hlcdc: Use drm_panel_bridge where appropriate (Eric) - panel: Add Innolux P079ZCA panel driver (Chris) - panel-simple: Add NL12880B20-05, NL192108AC18-02D, P320HVN03 panels (Lucas) - panel-samsung-s6e3ha2: Add s6e3hf2 panel support (Hoegeun) - zte,vc4,pl111,panel,mxsfb: Miscellaneous fixes Cc: Jose Abreu <Jose.Abreu@synopsys.com> Cc: Eric Anholt <eric@anholt.net> Cc: Chris Zhong <zyw@rock-chips.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Hoegeun Kwon <hoegeun.kwon@samsung.com> Cc: Dawid Kurek <dawikur@gmail.com> * tag 'drm-misc-next-2017-06-15' of git://anongit.freedesktop.org/git/drm-misc: (26 commits) drm: Reduce scope of 'state' variable drm: mxsfb_crtc: Reset the eLCDIF controller drm: Remove duplicate forward declaration drm/panel: s6e3ha2: Add support for s6e3hf2 panel on TM2e board dt-bindings: Add support for samsung s6e3hf2 panel drm/panel: add backlight dependency for sitronix-st7789v drm/panel: S6E3HA2 needs backlight code drm/panel: simple: add support for AUO P320HVN03 drm/panel: simple: add support for NLT NL192108AC18-02D dt-bindings: add vendor prefix for NLT Technologies, Ltd. drm/panel: simple: add support for NEC NL12880B20-05 drm/panel: add Innolux P079ZCA panel driver dt-bindings: Add INNOLUX P079ZCA panel bindings drm/vc4: Fix resource leak in 'vc4_get_hang_state_ioctl()' in error handling path drm/vc4/vc4_bo.c: always set bo->resv drm: Add const to name field declaration in struct drm_prop_enum_list drm/pl111: Fix offset calculation for the primary plane. drm/atmel-hlcdc: Fix panel registration drm/bridge: Build the panel wrapper in drm_kms_helper drm/atmel-hlcdc: Replace the panel usage with drm_panel_bridge. ...
-
Dawid Kurek authored
Smaller scope reduces visibility of variable and makes usage of uninitialized variable less possible. Changes in v2: - separate declaration and initialization Changes in v3: - add missing signed-off-by tag Signed-off-by:
Dawid Kurek <dawikur@gmail.com> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170615174556.GA8872@gmail.com
-
Fabio Estevam authored
According to the eLCDIF initialization steps listed in the MX6SX Reference Manual the eLCDIF block reset is mandatory. Without performing the eLCDIF reset the display shows garbage content when the kernel boots. In earlier tests this issue has not been observed because the bootloader was previously showing a splash screen and the bootloader display driver does properly implement the eLCDIF reset. Add the eLCDIF reset to the driver, so that it can operate correctly independently of the bootloader. Tested on a imx6sx-sdb board. Cc: <stable@vger.kernel.org> Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by:
Marek Vasut <marex@denx.de> Signed-off-by:
-
Dawid Kurek authored
Forward declarations in C are great but I'm pretty sure one is enough. Signed-off-by:
-
- 14 Jun, 2017 12 commits
-
-
Hoegeun Kwon authored
This patch supports TM2e panel and the panel has 1600x2560 resolution in 5.65" physical. This identify panel type with compatibility string, also invoke display mode that matches the type. So add the check code for s6e3ha2 compatibility and s6e3hf2 type and select the drm_display_mode of default and edge type. Signed-off-by:
Hoegeun Kwon <hoegeun.kwon@samsung.com> Reviewed-by:
Andrzej Hajda <a.hajda@samsung.com> Reviewed-by:
Inki Dae <inki.dae@samsung.com> [treding@nvidia.com: fixup checkpatch warnings] Signed-off-by:
Thierry Reding <treding@nvidia.com> Link: http://patchwork.freedesktop.org/patch/msgid/1492504836-19225-3-git-send-email-hoegeun.kwon@samsung.com
-
Hoegeun Kwon authored
The samsung s6e3hf2 panel is a 5.65" 1600x2560 AMOLED panel connected using MIPI-DSI interfaces. The s6e3hf2 is add to samsung,s6e3ha2.txt binding because it is a panel similar to the s6e3ha2. So add the compatible string and comments. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
Without the dependency, we run into a link error: drivers/gpu/drm/panel/panel-sitronix-st7789v.o: In function `st7789v_probe': panel-sitronix-st7789v.c:(.text.st7789v_probe+0xc0): undefined reference to `of_find_backlight_by_node' Fixes: 7142afb3 ("drm/panel: Add driver for sitronix ST7789V LCD controller") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
Arnd Bergmann authored
The new S6E3HA2 driver fails to link when backlight is disabled: ERROR: "backlight_device_register" [drivers/gpu/drm/panel/panel-samsung-s6e3ha2.ko] undefined! ERROR: "backlight_device_unregister" [drivers/gpu/drm/panel/panel-samsung-s6e3ha2.ko] undefined! This adds a Kconfig dependency like we have it for some other panel drivers. Fixes: ed29f942 ("drm/panel: Add support for S6E3HA2 panel driver on TM2 board") Signed-off-by:
-
Lucas Stach authored
This adds support for the AU Optronics Corporation 31.5" FHD (1920x1080) LVDS TFT LCD panel, which can be supported by the simple panel driver Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Acked-by:
-
Lucas Stach authored
This adds support for the NLT Technologies NL192108AC18-02D 15.6" LVDS FullHD TFT LCD panel, which can be supported by the simple panel driver. Timings are taken from the preliminary datasheet, as a final one is not yet available. Signed-off-by:
-
Lucas Stach authored
NLT technologies is the former NEC display business, but changed its name to NLT Technologies when forming a joint venture with Shenzhen AVIC OPTOELECTRONICS, Ltd. Signed-off-by:
-
Lucas Stach authored
This adds support for the NEC LCD Technologies, Ltd. 12.1" WXGA (1280x800) LVDS TFT LCD panel, which can be supported by the simple panel driver. Signed-off-by:
-
Chris Zhong authored
Support Innolux P079ZCA 7.85" 768x1024 TFT LCD panel, it is a MIPI DSI panel. Signed-off-by:
Chris Zhong <zyw@rock-chips.com> Reviewed-by:
Brian Norris <briannorris@chromium.org> Signed-off-by:
-
Chris Zhong authored
The Innolux P079ZCA is a 7.85" panel with a 768X1024 resolution and connected to DSI using four lanes. Signed-off-by:
-
Dave Airlie authored
This interface allows importing the fence from a sync_file into an existing drm sync object, or exporting the fence attached to an existing drm sync object into a new sync file object. This should only be used to interact with sync files where necessary. v1.1: fence put fixes (Chris), drop fence from ioctl names (Chris) fixup for new fence replace API. Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
Sync objects are new toplevel drm object, that contain a pointer to a fence. This fence can be updated via command submission ioctls via drivers. There is also a generic wait obj API modelled on the vulkan wait API (with code modelled on some amdgpu code). These objects can be converted to an opaque fd that can be passes between processes. v2: rename reference/unreference to put/get (Chris) fix leaked reference (David Zhou) drop mutex in favour of cmpxchg (Chris) v3: cleanups from danvet, rebase on drm_fops rename check fd_flags is 0 in ioctls. v4: export find/free, change replace fence to take a syncobj. In order to support lookup first, replace later semantics which seem in the end to be cleaner. Reviewed-by:
-
- 13 Jun, 2017 1 commit
-
-
Christophe JAILLET authored
If one 'drm_gem_handle_create()' fails, we leak somes handles and some memory. In order to fix it: - move the 'free(bo_state)' at the end of the function so that it is also called in the eror handling path. This has the side effect to also try to free it if the first 'kcalloc' fails. This is harmless. - add a new label, err_delete_handle, in order to delete already allocated handles in error handling path - remove the now useless 'err' label The way the code is now written will also delete the handles if the 'copy_to_user()' call fails. Signed-off-by:Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Eric Anholt <eric@anholt.net> Link: http://patchwork.freedesktop.org/patch/msgid/20170512123803.1886-1-christophe.jaillet@wanadoo.fr
-
- 12 Jun, 2017 1 commit
-
-
Hans Verkuil authored
The bo->resv pointer could be NULL, leading to kernel oopses like the one below. This patch ensures that bo->resv is always set in vc4_create_object ensuring that it is never NULL. Thanks to Eric Anholt for pointing to the correct solution. [ 19.738487] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 19.746805] pgd = ffff8000275fc000 [ 19.750319] [00000000] *pgd=0000000000000000 [ 19.754715] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 19.760369] Modules linked in: smsc95xx usbnet vc4 drm_kms_helper drm pwm_bcm2835 i2c_bcm2835 bcm2835_rng rng_core bcm2835_dma virt_dma [ 19.772767] CPU: 0 PID: 1297 Comm: Xorg Not tainted 4.12.0-rc1-rpi3 #58 [ 19.779476] Hardware name: Raspberry Pi 3 Model B (DT) [ 19.784688] task: ffff800028268000 task.stack: ffff800026c08000 [ 19.790705] PC is at ww_mutex_lock_interruptible+0x14/0xc0 [ 19.796329] LR is at vc4_submit_cl_ioctl+0x4fc/0x998 [vc4] ... [ 20.240855] [<ffff0000088975f4>] ww_mutex_lock_interruptible+0x14/0xc0 [ 20.247528] [<ffff0000009b3ea4>] vc4_submit_cl_ioctl+0x4fc/0x998 [vc4] [ 20.254372] [<ffff0000008f75f8>] drm_ioctl+0x180/0x438 [drm] [ 20.260120] [<ffff00000821383c>] do_vfs_ioctl+0xa4/0x7d0 [ 20.265510] [<ffff000008213fe4>] SyS_ioctl+0x7c/0x98 [ 20.270550] [<ffff000008082f30>] el0_svc_naked+0x24/0x28 [ 20.275941] Code: d2800002 d5384103 910003fd f9800011 (c85ffc04) [ 20.282527] ---[ end trace 1f6bd640ff32ae12 ]--- Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by:
-
- 08 Jun, 2017 1 commit
-
-
Jyri Sarha authored
There is no reason why the name field should not be const, but several why it should. The struct should only be used by drm_property_create_enum() and there the name-field from the struct is passed to drm_property_add_enum(), which takes a const char * as a parameter. Signed-off-by:
Jyri Sarha <jsarha@ti.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/5dd3b6a1e20452bd8abdcbc55d1e8d7f56262266.1496161066.git.jsarha@ti.com
-
- 07 Jun, 2017 3 commits
-
-
Eric Anholt authored
If src_x/y were nonzero, we failed to shift them down by 16 to get the pixel offset. The recent CMA helper function gets it right. Signed-off-by:
Mircea Carausu <mircea.carausu@broadcom.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170603015733.13266-1-eric@anholt.netReviewed-by:
-
Boris Brezillon authored
Attach the panel-bridge created by drm_panel_bridge_add() to the parallel RGB encoder. Fixes: 96160a80 ("drm/atmel-hlcdc: Replace the panel usage with drm_panel_bridge.") Reviewed-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1496748866-17165-1-git-send-email-boris.brezillon@free-electrons.com
-
Maarten Lankhorst authored
This fixes the following depmod error when building drm as a module: depmod: ERROR: Found 6 modules in dependency cycles! depmod: ERROR: Cycle detected: drm -> drm_kms_helper -> drm Fixes: 13dfc054 ("drm/bridge: Refactor out the panel wrapper from the lvds-encoder bridge.") Tested-by:
Lofstedt, Marta <marta.lofstedt@intel.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
- 06 Jun, 2017 2 commits
-
-
Dave Airlie authored
Merge tag 'exynos-drm-next-for-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next Summary: - Rework vblank handling . This patch series adds frame counter callback and removes unnecessary pipe relevnt fields and simplifies event handling. - clean up and fix up sw-trigger relevant code . This patch series moves TE relevant code from Panel and HDMI to DECON driver to fix a race between interrupt handlers and DECON disable, and to fix timeout issue at wait-for-vblank. . It removes unnecessary flags and check code specific to Exynos driver. * tag 'exynos-drm-next-for-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: (27 commits) drm/exynos/decon5433: remove useless check drm/exynos/decon5433: kill BIT_SUSPENDED flag drm/exynos/decon5433: kill BIT_WIN_UPDATED flag drm/exynos/decon5433: kill BIT_CLKS_ENABLED flag drm/exynos/decon5433: kill BIT_IRQS_ENABLED flag drm/exynos/decon5433: move TE handling to DECON dt-bindings: exynos5433-decon: add TE interrupt binding dt-bindings: exynos5433-decon: fix interrupts bindings drm/exynos/decon5433: always do sw-trigger when vblanks enabled drm/exynos: mixer: document YCbCr magic numbers drm/exynos: mixer: simplify mixer_cfg_rgb_fmt() drm/exynos/dsi: fix bridge_node DT parsing drm/exynos/hdmi: fix pipeline disable order drm/exynos/decon5433: simplify shadow protect code drm/exynos/decon5433: kill BIT_IRQS_ENABLED drm/exynos/decon5433: kill DECON_UPDATE workaround drm/exynos: kill mode_set_nofb callback drm/exynos: kill pipe field from drivers contexts drm/exynos: set plane possible_crtcs in exynos_plane_init drm/exynos: kill exynos_drm_private::pipe ...
-
git://anongit.freedesktop.org/git/drm-miscDave Airlie authored
Core Changes: - Stop proliferation of drm_vblank_cleanup by adding to the docs and deleting boilerplate (Daniel) - Roll out and use mode_valid hooks across crtc/encoder/bridge (Jose) - Add drm_vblank.[hc] to isolate vblank code from optional irq helpers (Daniel) Driver Changes: - Replace drm_for_each_connector with drm_for_each_connector_iter (Gustavo) - A couple misc driver fixes Cc: Gustavo Padovan <gustavo.padovan@collabora.com> Cc: Jose Abreu <Jose.Abreu@synopsys.com> Cc: Daniel Vetter <daniel.vetter@intel.com> * tag 'drm-misc-next-2017-06-02' of git://anongit.freedesktop.org/git/drm-misc: (34 commits) drm/vc4: Mark the device as active when enabling runtime PM. drm: remove writeq/readq function definitions drm/atmel-hlcdc: Use crtc->mode_valid() callback drm/exynos: Drop drm_vblank_cleanup drm/hdlcd|mali: Drop drm_vblank_cleanup drm/doc: Polish irq helper documentation drm: Extract drm_vblank.[hc] drm/vc4: Fix comment in vc4_drv.h drm/pl111: fix warnings without CONFIG_ARM_AMBA drm/atomic: Consitfy mode parameter to drm_atomic_set_mode_for_crtc() drm/arcgpu: Drop drm_vblank_cleanup drm/atmel: Drop drm_vblank_cleanup drm/imx: Drop drm_vblank_cleanup drm/meson: Drop drm_vblank_cleanup drm/stm: Drop drm_vblank_cleanup drm/sun4i: Drop drm_vblank_cleanup drm: better document how to send out the crtc disable event drm: Use vsnprintf extension %ph drm/doc: move printf helpers out of drmP.h drm/pl111: select DRM_PANEL ...
-
- 05 Jun, 2017 7 commits
-
-
Eric Anholt authored
This cuts 135 lines of boilerplate, at the cost of losing the filtering of get_modes() using atmel_hlcdc_dc_mode_valid(). The atomic check will still check that we don't set an invalid mode, though. Acked-by:
-
Eric Anholt authored
drm_encoder_cleanup() finishes with memsetting it to 0, already. Acked-by:
-
Eric Anholt authored
Another 100 lines of boilerplate gone, while allowing for bridges to be connected in the display chain. Reviewed-by:
-
Eric Anholt authored
The newer version of the RPi panel driver is going to be a combination of a bridge and a panel, but we should also support panels without a bridge, so the panel-bridge layer lets us do that cleanly. v2: Drop "dev" argument. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
-
Eric Anholt authored
Many DRM drivers have common code to make a stub connector implementation that wraps a drm_panel. By wrapping the panel in a DRM bridge, all of the connector code (including calls during encoder enable/disable) goes away. v2: Fix build with CONFIG_DRM=m, drop "dev" argument that should just be the panel's dev, move kerneldoc up a level and document _remove(). v3: Fix another breakage with CONFIG_DRM=m, fix breakage with CONFIG_OF=n, move protos under CONFIG_DRM_PANEL_BRIDGE, wrap a line. Signed-off-by: -
Jose Abreu authored
Now that we have a callback to check if bridge supports a given mode we can use it in Synopsys Designware HDMI bridge so that we restrict the number of probbed modes to the ones we can actually display. Also, there is no need to use mode_fixup() callback as mode_valid() will handle the mode validation. NOTE: I also had to change the pdata declaration of mode_valid custom callback so that the passed modes are const. I also changed in the platforms I found. Not even compiled it though. Signed-off-by:
Jose Abreu <joabreu@synopsys.com> Acked-by:
Neil Armstrong <narmstrong@baylibre.com> Acked-by:
Philipp Zabel <p.zabel@pengutronix.de> Cc: Carlos Palminha <palminha@synopsys.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Archit Taneja <architt@codeaurora.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: David Airlie <airlied@linux.ie> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Benjamin Gaignard authored
Use devm_of_platform_populate() to be sure that of_platform_depopulate is called when removing the driver. Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> CC: Shawn Guo <shawnguo@kernel.org> CC: David Airlie <airlied@linux.ie> CC: dri-devel@lists.freedesktop.org CC: linux-kernel@vger.kernel.org Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> Link: http://patchwork.freedesktop.org/patch/msgid/1496072763-31209-4-git-send-email-benjamin.gaignard@linaro.org
-
- 03 Jun, 2017 1 commit
-
-
Dave Airlie authored
Merge tag 'omapdrm-4.13-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-next omapdrm changes for v4.13 * dmabuf fence support * TILER rotation fixes * big pile of various cleanups and refactorings * tag 'omapdrm-4.13-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (64 commits) drm/omap: fix tiled buffer stride calculations drm/omap: fix YUV422 90/270 rotation with mirroring drm/omap: fix YUV422 rotation with TILER drm/omap: pass rotation to dispc drm/omap: DRM_MODE_REFLECT_* instead of mirror boolean drm/omap: use DRM_MODE_ROTATE_* instead of OMAP_DSS_ROT_* drm/omap: remove omap_drm_win drm/omap: add drm_rotation_to_tiler helper() drm/omap: rename color_mode to fourcc drm/omap: cleanup formats array drm/omap: remove omap_framebuffer_get_formats() drm/omap: use DRM_FORMAT_* instead of OMAP_DSS_COLOR_* drm/omap: use u32 instead of enum omap_color_mode drm/omap: change supported_modes to an array drm/omap: remove unneeded prototypes drm/omap: add format_is_yuv() helper drm/omap: cleanup offset calculation drm/omap: remove dma & vrfb rotation drm/omap: ratelimit OCP error drm/omap: remove CLUT ...
-
- 02 Jun, 2017 8 commits
-
-
Eric Anholt authored
Failing to do so meant that we got a resume() callback on first use of the device, so we would leak the bin BO that we allocated during probe. Signed-off-by:
-
Corentin Labbe authored
Instead of rewriting write/readq, use linux/io-64-nonatomic-lo-hi.h which already have them. Signed-off-by:
Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by:
-
Jose Abreu authored
Now that we have a callback to check if crtc supports a given mode we can use it in atmel-hlcdc so that we restrict the number of probbed modes to the ones we can actually display. Also, remove the mode_fixup() callback as this is no longer needed because mode_valid() will be called before. Signed-off-by:
-
Tomi Valkeinen authored
omap_gem uses page alignment for buffer stride. The related calculations are a bit off, though, as byte stride of 4096 gets aligned to 8192, instead of 4096. This patch changes the code to use DIV_ROUND_UP(), which fixes those calculations and makes them more readable. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com>
-
Tomi Valkeinen authored
When rotating 90/270 + mirroring with YUV422, the end result will have adjacent pixels swapped. The problem is that dispc_ovl_set_rotation_attrs() has wrong rotation values for these cases. Signed-off-by:
-
Tomi Valkeinen authored
TILER rotation with YUV422 pixelformats does not work at the moment. All other pixel formats work, because the pixelformat's pixel size is equal to tiler unit size (e.g. XR24's pixel size is 32 bits, and the TILER unit size that has to be used is 32 bits). For YUV422 formats this is not the case, as the TILER unit size has to be 32 bits, but the pixel size is 16 bits. The end result is OCP errors and sync losts. This patch adds the code to adjust the variables for YUV422 formats. We could make the code more generic by passing around the pixel format, rotation type, angle and the tiler unit size, which would allow us to do calculations without special case for YUV422. However, this would make the code more complex, and at least for now this is much more easier to handle with these two special cases for YUV422. Signed-off-by:
-
Tomi Valkeinen authored
The omapdrm driver has not passed the rotation value to the dispc driver. This doesn't affect RGB formats, but YUV formats don't work without dispc knowing the orientation. Signed-off-by:
-
Tomi Valkeinen authored
Change dispc driver to use the DRM_MODE_REFLECT flags instead of a mirror boolean. Signed-off-by:
-
