- 25 Mar, 2019 17 commits
-
-
Dafna Hirschfeld authored
Add struct 'vicodec_dev_instance' for the fields in vicodec_dev that have have both decoder and encoder versions. Signed-off-by:
Dafna Hirschfeld <dafna3@gmail.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Dafna Hirschfeld authored
In the stateless decoder the reference buffer is null if the frame is an I-frame (flagged with FWHT_FL_I_FRAME). Make sure not to dereference it in that case. Signed-off-by:
-
Dafna Hirschfeld authored
Rename 'v4l2_fwht_default_fmt' to 'v4l2_fwht_find_nth_fmt' and add a function 'v4l2_fwht_validate_fmt' to check if a format info matches the parameters. This function will also be used to validate the stateless params when adding support for stateless codecs. Signed-off-by:
-
Dafna Hirschfeld authored
Move the code that validates version dependent header values to a separate function 'validate_by_version' Signed-off-by:
-
Dafna Hirschfeld authored
In the decoder, save the inner reference frame in the same format as the capture buffer. The decoder writes directly to the capture buffer and then the capture buffer is copied to the reference buffer. This will simplify the stateless decoder. Signed-off-by:
-
Dafna Hirschfeld authored
Add the field 'buf' to fwht_raw_frame to indicate the start of the raw frame buffer. This field will be used to copy the capture buffer to the reference buffer in the next patch. Signed-off-by:
-
Dafna Hirschfeld authored
Introduce 'prepare_raw_frame' function that fills the values of a raw frame struct according to the format. Signed-off-by:
-
Dafna Hirschfeld authored
Free compressed_frame buffer upon device release. Signed-off-by:
-
Dafna Hirschfeld authored
The function 'v4l2_m2m_buf_copy_metadata' should be called even if decoding/encoding ends with status VB2_BUF_STATE_ERROR, so that the metadata is copied from the source buffer to the dest buffer. Signed-off-by:
-
Dafna Hirschfeld authored
v4l2_fwht_encode returns either an error code on failure or the size of the compressed frame on success. So change the var assigned to it from 'ret' to 'comp_sz_or_errcode' to clarify that. Signed-off-by:
-
Dafna Hirschfeld authored
If one of the controls fails to set, then 'v4l2_ctrl_request_setup' immediately returns with the error code. Signed-off-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
-
Dafna Hirschfeld authored
'v4l2_m2m_ctx_release' calls request complete so it should be called before 'v4l2_ctrl_handler_free'. Signed-off-by:
-
Hans Verkuil authored
The logic of g_selection was wrong: encoders support crop, decoders support compose, but the code allowed both. Signed-off-by:
-
Dafna Hirschfeld authored
The selection api should check only single buffer types because multiplanar types are converted to single in drivers/media/v4l2-core/v4l2-ioctl.c Signed-off-by:
-
Hans Verkuil authored
If requests are used when they shouldn't, or not used when they should, then return EBADR (Invalid request descriptor) instead of EACCES. The reason for this change is that EACCES has more to do with permissions (not being the owner of the resource), but in this case the request file descriptor is just wrong for the current mode of the device. Update the documentation accordingly. Signed-off-by:
-
Hans Verkuil authored
The cedrus stateless decoder requires the use of request, so indicate this by setting requires_requests to 1. Note that the cedrus driver never checked for this, and as far as I can tell would just crash if an attempt was made to queue a buffer without a request. Signed-off-by:
-
Hans Verkuil authored
Stateless codecs require the use of the Request API as opposed of it being optional. So add a bit to indicate this and let vb2 check for this. If an attempt is made to queue a buffer without an associated request, then the EBADR error is returned to userspace. Doing this check in the vb2 core simplifies drivers, since they don't have to check for this, they can just set this flag. Signed-off-by:
-
- 20 Mar, 2019 15 commits
-
-
Mauro Carvalho Chehab authored
Checkpatch wants to use 'help' instead of '---help---': WARNING: prefer 'help' over '---help---' for new help texts Let's change it globally at the media subsystem, as otherwise people would keep using the old way. Signed-off-by: -
Sakari Ailus authored
This is not how ACPI tables are written. Add a deprecation note and refer to the proper documentation. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Sakari Ailus authored
Set the entity function for the four CSI-2 receiver sub-devices the driver creates. This avoids a kernel warning from each as well. Signed-off-by:
Bingbu Cao <bingbu.cao@intel.com> Signed-off-by:
-
Sakari Ailus authored
The lens drivers had ended up under the video decoder section; add a new one just for them, between the camera sensors and flash drivers. Signed-off-by:
-
Sakari Ailus authored
ti-vpe driver parsed the remote endpoints for properties but ignored the local ones. Fix this by parsing the local endpoint properties instead. Signed-off-by:
-
Sakari Ailus authored
V4L2 fwnode matching right now still works based on device nodes, not port nodes. Fix this. Signed-off-by:
-
Sakari Ailus authored
C-PHY has no clock lanes. Therefore the first data lane is 0 by default. Fixes: edc6d56c ("media: v4l: fwnode: Support parsing of CSI-2 C-PHY endpoints") Signed-off-by:
-
Sakari Ailus authored
The lack of defaults provided by the caller to v4l2_fwnode_endpoint_parse() signals the use of the default lane mapping. The default lane mapping must not be used however if the firmmare contains the lane mapping. Disable the default lane mapping in that case, and improve the debug messages telling of the use of the defaults. This was missed previously since the default mapping will only unsed in this case if the bus type is set, and no driver did both while still needing the lane mapping configuration. Fixes: b4357d21 ("media: v4l: fwnode: Support default CSI-2 lane mapping for drivers") Signed-off-by:
-
Akinobu Mita authored
Since commit 3d6a8fe2 ("media: ov7670: hook s_power onto v4l2 core"), the device is actually powered off while the video stream is stopped. So now set_format and s_frame_interval could be called while the device is powered off, but these callbacks try to change the register settings at this time. The frame format and framerate will be restored right after power-up, so we can just postpone applying these changes at these callbacks if the device is not powered up. Fixes: 3d6a8fe2 ("media: ov7670: hook s_power onto v4l2 core") Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by:
Lubomir Rintel <lkundrak@v3.sk> Tested-by:
-
Akinobu Mita authored
Since commit 3d6a8fe2 ("media: ov7670: hook s_power onto v4l2 core"), the device is actually powered off while the video stream is stopped. The frame format and framerate are restored right after power-up, but restoring the default register settings is forgotten. Fixes: 3d6a8fe2 ("media: ov7670: hook s_power onto v4l2 core") Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
Arnd Bergmann authored
The imgu_css_queue structure is too large to be put on the kernel stack, as we can see in 32-bit builds: drivers/staging/media/ipu3/ipu3-css.c: In function 'imgu_css_fmt_try': drivers/staging/media/ipu3/ipu3-css.c:1863:1: error: the frame size of 1172 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] By dynamically allocating this array, the stack usage goes down to an acceptable 140 bytes for the same x86-32 configuration. Fixes: f5f2e427 ("media: staging/intel-ipu3: Add css pipeline programming") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
Arnd Bergmann authored
The imgu_rpm_dummy_cb() looks like an API misuse that is explained in the comment above it. Aside from that, it also causes a warning when power management support is disabled: drivers/staging/media/ipu3/ipu3.c:794:12: error: 'imgu_rpm_dummy_cb' defined but not used [-Werror=unused-function] The warning is at least easy to fix by marking the function as __maybe_unused. Fixes: 7fc7af64 ("media: staging/intel-ipu3: Add imgu top level pci device driver") Signed-off-by:
-
Arnd Bergmann authored
The v4l2_pix_format_mplane structure is too large to be put on the kernel stack, as we can see in 32-bit builds: drivers/staging/media/ipu3/ipu3-v4l2.c: In function 'imgu_fmt': drivers/staging/media/ipu3/ipu3-v4l2.c:753:1: error: the frame size of 1028 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] By dynamically allocating this array, the stack usage goes down to an acceptable 272 bytes for the same x86-32 configuration. Fixes: a0ca1627 ("media: staging/intel-ipu3: Add v4l2 driver based on media framework") Signed-off-by:
-
Hans Verkuil authored
When start_streaming was called both last_src_buf and last_dst_buf pointers were set to NULL, but this depends on whether the capture or output queue starts streaming. When decoding with resolution changes in between the capture queue has to restart streaming whenever a resolution change occurs. And that would reset last_src_buf as well, which causes a problem if the decoder was stopped by the application. Since last_src_buf is now NULL, the LAST flag is never set for the last capture buffer. Signed-off-by:
-
Hans Verkuil authored
Some functions like enum_fmt use the buffer type as was passed from userspace, which might cause the switch to fall into the default case. Just drop the WARN_ON(1) to avoid kernel log pollution. Signed-off-by:
-
- 19 Mar, 2019 8 commits
-
-
Colin Ian King authored
Don't populate the array addr_list on the stack but instead make it static. Makes the object code smaller by 20 bytes Before: text data bss dec hex filename^M 16929 3626 384 20939 51cb ../usb/em28xx/em28xx-input.o After: text data bss dec hex filename^M 16829 3706 384 20919 51b7 ../usb/em28xx/em28xx-input.o (gcc version 8.3.0, aarch64) Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Jose Alberto Reguero authored
This patch add support for Avermedia TD310 usb stick. Signed-off-by:
Jose Alberto Reguero <jose.alberto.reguero@gmail.com> Signed-off-by:
-
Andreas Kemnade authored
i2c bus is already needed when the frontend is probed, so init it already in it930x_frontend_attach. That prevents errors like: si2168: probe of 6-0067 failed with error -5 Signed-off-by:
Andreas Kemnade <andreas@kemnade.info> Signed-off-by:
-
Kangjie Lu authored
si2165_readreg8() may fail. Looking into si2165_readreg8(), we will find that "val_tmp" will be an uninitialized value when regmap_read() fails. "val_tmp" is then assigned to "val". So if si2165_readreg8() fails, "val" will be a random value. Further use will lead to undefined behaviors. The fix checks if si2165_readreg8() fails, and if so, returns its error code upstream. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Reviewed-by:
Matthias Schwarzott <zzam@gentoo.org> Tested-by:
-
YueHaibing authored
Syzkaller report this: BUG: KASAN: use-after-free in sysfs_remove_file_ns+0x5f/0x70 fs/sysfs/file.c:468 Read of size 8 at addr ffff8881dc7ae030 by task syz-executor.0/6249 CPU: 1 PID: 6249 Comm: syz-executor.0 Not tainted 5.0.0-rc8+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 ? 0xffffffffc1728000 sysfs_remove_file_ns+0x5f/0x70 fs/sysfs/file.c:468 sysfs_remove_file include/linux/sysfs.h:519 [inline] driver_remove_file+0x40/0x50 drivers/base/driver.c:122 remove_bind_files drivers/base/bus.c:585 [inline] bus_remove_driver+0x186/0x220 drivers/base/bus.c:725 driver_unregister+0x6c/0xa0 drivers/base/driver.c:197 serial_ir_init_module+0x169/0x1000 [serial_ir] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f9450132c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00007f9450132c70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f94501336bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Allocated by task 6249: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:495 kmalloc include/linux/slab.h:545 [inline] kzalloc include/linux/slab.h:740 [inline] bus_add_driver+0xc0/0x610 drivers/base/bus.c:651 driver_register+0x1bb/0x3f0 drivers/base/driver.c:170 serial_ir_init_module+0xe8/0x1000 [serial_ir] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 6249: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:457 slab_free_hook mm/slub.c:1430 [inline] slab_free_freelist_hook mm/slub.c:1457 [inline] slab_free mm/slub.c:3005 [inline] kfree+0xe1/0x270 mm/slub.c:3957 kobject_cleanup lib/kobject.c:662 [inline] kobject_release lib/kobject.c:691 [inline] kref_put include/linux/kref.h:67 [inline] kobject_put+0x146/0x240 lib/kobject.c:708 bus_remove_driver+0x10e/0x220 drivers/base/bus.c:732 driver_unregister+0x6c/0xa0 drivers/base/driver.c:197 serial_ir_init_module+0x14c/0x1000 [serial_ir] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881dc7ae000 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 48 bytes inside of 256-byte region [ffff8881dc7ae000, ffff8881dc7ae100) The buggy address belongs to the page: page:ffffea000771eb80 count:1 mapcount:0 mapping:ffff8881f6c02e00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 ffffea0007d14800 0000000400000002 ffff8881f6c02e00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881dc7adf00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8881dc7adf80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff8881dc7ae000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881dc7ae080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881dc7ae100: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00 There are already cleanup handlings in serial_ir_init error path, no need to call serial_ir_exit do it again in serial_ir_init_module, otherwise will trigger a use-after-free issue. Fixes: fa5dc29c ("[media] lirc_serial: move out of staging and rename to serial_ir") Reported-by:Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
YueHaibing authored
Remove including <linux/version.h> that don't need it. Signed-off-by:
-
Nicholas Mc Guire authored
Checking of kmalloc() seems to have been committed - as cx23885_dvb_register() is checking for != 0 return, returning -ENOMEM should be fine here. While at it address the coccicheck suggestion to move to kmemdup rather than using kmalloc+memcpy. Fixes: 46b21bba ("[media] Add support for DViCO FusionHDTV DVB-T Dual Express2") Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by:
-
James Hutchinson authored
Ref: https://bugzilla.kernel.org/show_bug.cgi?id=199323 Users are experiencing problems with the DVBSky S960/S960C USB devices since the following commit: 9d659ae1: ("locking/mutex: Add lock handoff to avoid starvation") The device malfunctions after running for an indeterminable period of time, and the problem can only be cleared by rebooting the machine. It is possible to encourage the problem to surface by blocking the signal to the LNB. Further debugging revealed the cause of the problem. In the following capture: - thread #1325 is running m88ds3103_set_frontend - thread #42 is running ts2020_stat_work a> [1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 07 80 [1325] usb 1-1: dvb_usb_v2_generic_io: <<< 08 [42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 68 3f [42] usb 1-1: dvb_usb_v2_generic_io: <<< 08 ff [42] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11 [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 [42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 60 3d [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 ff b> [1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 07 00 [1325] usb 1-1: dvb_usb_v2_generic_io: <<< 07 [42] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11 [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 [42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 60 21 [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 ff [42] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11 [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 [42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 60 66 [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 ff [1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11 [1325] usb 1-1: dvb_usb_v2_generic_io: <<< 07 [1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 60 02 10 0b [1325] usb 1-1: dvb_usb_v2_generic_io: <<< 07 Two i2c messages are sent to perform a reset in m88ds3103_set_frontend: a. 0x07, 0x80 b. 0x07, 0x00 However, as shown in the capture, the regmap mutex is being handed over to another thread (ts2020_stat_work) in between these two messages. >From here, the device responds to every i2c message with an 07 message, and will only return to normal operation following a power cycle. Use regmap_multi_reg_write to group the two reset messages, ensuring both are processed before the regmap mutex is unlocked. Signed-off-by:
James Hutchinson <jahutchinson99@googlemail.com> Reviewed-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
