- 06 Nov, 2019 40 commits
-
-
Andi Kleen authored
[ Upstream commit 6bdfd9f1 ] The Intel fixed counters use a special table to override the JSON information. During this override the period information from the JSON file got dropped, which results in inst_retired.any and similar running with frequency mode instead of a period. Just specify the expected period in the table. Signed-off-by:
Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: http://lore.kernel.org/lkml/20190927233546.11533-2-andi@firstfloor.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Andi Kleen authored
[ Upstream commit e98df280 ] When the LBR data and the instructions in a binary do not match the loop printing instructions could get confused and print a long stream of bogus <bad> instructions. The problem was that if the instruction decoder cannot decode an instruction it ilen wasn't initialized, so the loop going through the basic block would continue with the previous value. Harden the code to avoid such problems: - Make sure ilen is always freshly initialized and is 0 for bad instructions. - Do not overrun the code buffer while printing instructions - Print a warning message if the final jump is not on an instruction boundary. Signed-off-by:
-
Steve MacLean authored
[ Upstream commit ee212d6e ] Whenever an mmap/mmap2 event occurs, the map tree must be updated to add a new entry. If a new map overlaps a previous map, the overlapped section of the previous map is effectively unmapped, but the non-overlapping sections are still valid. maps__fixup_overlappings() is responsible for creating any new map entries from the previously overlapped map. It optionally creates a before and an after map. When creating the after map the existing code failed to adjust the map.pgoff. This meant the new after map would incorrectly calculate the file offset for the ip. This results in incorrect symbol name resolution for any ip in the after region. Make maps__fixup_overlappings() correctly populate map.pgoff. Add an assert that new mapping matches old mapping at the beginning of the after map. Committer-testing: Validated correct parsing of libcoreclr.so symbols from .NET Core 3.0 preview9 (which didn't strip symbols). Preparation: ~/dotnet3.0-preview9/dotnet new webapi -o perfSymbol cd perfSymbol ~/dotnet3.0-preview9/dotnet publish perf record ~/dotnet3.0-preview9/dotnet \ bin/Debug/netcoreapp3.0/publish/perfSymbol.dll ^C Before: perf script --show-mmap-events 2>&1 | grep -e MMAP -e unknown |\ grep libcoreclr.so | head -n 4 dotnet 1907 373352.698780: PERF_RECORD_MMAP2 1907/1907: \ [0x7fe615726000(0x768000) @ 0 08:02 5510620 765057155]: \ r-xp .../3.0.0-preview9-19423-09/libcoreclr.so dotnet 1907 373352.701091: PERF_RECORD_MMAP2 1907/1907: \ [0x7fe615974000(0x1000) @ 0x24e000 08:02 5510620 765057155]: \ rwxp .../3.0.0-preview9-19423-09/libcoreclr.so dotnet 1907 373352.701241: PERF_RECORD_MMAP2 1907/1907: \ [0x7fe615c42000(0x1000) @ 0x51c000 08:02 5510620 765057155]: \ rwxp .../3.0.0-preview9-19423-09/libcoreclr.so dotnet 1907 373352.705249: 250000 cpu-clock: \ 7fe6159a1f99 [unknown] \ (.../3.0.0-preview9-19423-09/libcoreclr.so) After: perf script --show-mmap-events 2>&1 | grep -e MMAP -e unknown |\ grep libcoreclr.so | head -n 4 dotnet 1907 373352.698780: PERF_RECORD_MMAP2 1907/1907: \ [0x7fe615726000(0x768000) @ 0 08:02 5510620 765057155]: \ r-xp .../3.0.0-preview9-19423-09/libcoreclr.so dotnet 1907 373352.701091: PERF_RECORD_MMAP2 1907/1907: \ [0x7fe615974000(0x1000) @ 0x24e000 08:02 5510620 765057155]: \ rwxp .../3.0.0-preview9-19423-09/libcoreclr.so dotnet 1907 373352.701241: PERF_RECORD_MMAP2 1907/1907: \ [0x7fe615c42000(0x1000) @ 0x51c000 08:02 5510620 765057155]: \ rwxp .../3.0.0-preview9-19423-09/libcoreclr.so All the [unknown] symbols were resolved. Signed-off-by:
Steve MacLean <Steve.MacLean@Microsoft.com> Tested-by:
Brian Robbins <brianrob@microsoft.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Eric Saint-Etienne <eric.saint.etienne@oracle.com> Cc: John Keeping <john@metanate.com> Cc: John Salem <josalem@microsoft.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Tom McDonald <thomas.mcdonald@microsoft.com> Link: http://lore.kernel.org/lkml/BN8PR21MB136270949F22A6A02335C238F7800@BN8PR21MB1362.namprd21.prod.outlook.comSigned-off-by:
-
Ian Rogers authored
[ Upstream commit e3e2cf3d ] An optimized build such as: make -C tools/perf CLANG=1 CC=clang EXTRA_CFLAGS="-O3 will turn the dereference operation into a ud2 instruction, raising a SIGILL rather than a SIGSEGV. Use raise(..) for correctness and clarity. Similar issues were addressed in Numfor Mbiziwo-Tiapo's patch: https://lkml.org/lkml/2019/7/8/1234 Committer testing: Before: [root@quaco ~]# perf test hooks 55: perf hooks : Ok [root@quaco ~]# perf test -v hooks 55: perf hooks : --- start --- test child forked, pid 17092 SIGSEGV is observed as expected, try to recover. Fatal error (SEGFAULT) in perf hook 'test' test child finished with 0 ---- end ---- perf hooks: Ok [root@quaco ~]# After: [root@quaco ~]# perf test hooks 55: perf hooks : Ok [root@quaco ~]# perf test -v hooks 55: perf hooks : --- start --- test child forked, pid 17909 SIGSEGV is observed as expected, try to recover. Fatal error (SEGFAULT) in perf hook 'test' test child finished with 0 ---- end ---- perf hooks: Ok [root@quaco ~]# Fixes: a074865e ("perf tools: Introduce perf hooks") Signed-off-by:
Ian Rogers <irogers@google.com> Tested-by:
-
Ian Rogers authored
[ Upstream commit 4b0b2b09 ] Unconditionally defining _FORTIFY_SOURCE can break tools that don't work with it, such as memory sanitizers: https://github.com/google/sanitizers/wiki/AddressSanitizer#faq Fixes: 4b6ab94e ("perf subcmd: Create subcmd library") Signed-off-by:
-
Pascal Bouwmann authored
[ Upstream commit 6c59a962 ] The center temperature of the supported devices stored in the constant BMC150_ACCEL_TEMP_CENTER_VAL is not 24 degrees but 23 degrees. It seems that some datasheets were inconsistent on this value leading to the error. For most usecases will only make minor difference so not queued for stable. Signed-off-by:
Pascal Bouwmann <bouwmann@tau-tec.de> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Remi Pommarel authored
[ Upstream commit de10ac47 ] meson_saradc's irq handler uses priv->regmap so make sure that it is allocated before the irq get enabled. This also fixes crash when CONFIG_DEBUG_SHIRQ is enabled, as device managed resources are freed in the inverted order they had been allocated, priv->regmap was freed before the spurious fake irq that CONFIG_DEBUG_SHIRQ adds called the handler. Fixes: 3af10913 ("iio: adc: meson-saradc: switch from polling to interrupt mode") Reported-by:
Elie Roudninski <xademax@gmail.com> Signed-off-by:
Remi Pommarel <repk@triplefau.lt> Reviewed-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by:
Kevin Hilman <khilman@baylibre.com> Signed-off-by:
-
Sven Van Asbroeck authored
[ Upstream commit 252fbeb8 ] Explicitly cancel/sync the irq_work delayed work, otherwise there's a chance that it will run after the device is removed, which would result in a use-after-free. Note that cancel/sync should happen: - after irq's have been disabled, as the isr re-schedules the work - before the power supply is unregistered, because the work func uses the power supply handle. Cc: Alexander Kurz <akurz@blala.de> Signed-off-by:
Sven Van Asbroeck <TheSven73@gmail.com> Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
-
Dmytro Laktyushkin authored
[ Upstream commit f25f06b6 ] We fail to reset the second odm combine pipe. This change fixes odm pointer management. Signed-off-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by:
Tony Cheng <Tony.Cheng@amd.com> Acked-by:
Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Sven Van Asbroeck authored
[ Upstream commit 7cf58b79 ] In remove(), ensure that the PME work cannot run after kfree() is called. Otherwise, this could result in a use-after-free. This issue was detected with the help of Coccinelle. Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Cc: Sinan Kaya <okaya@kernel.org> Cc: Frederick Lawler <fred@fredlawl.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Andrew Lunn authored
[ Upstream commit 342a0ee7 ] There is no need to hold the register lock while requesting the GPIO interrupt. By not holding it we can also avoid a false positive lockdep splat. Reported-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Kees Cook authored
[ Upstream commit b5372fe5 ] Commit 8099b047 ("exec: load_script: don't blindly truncate shebang string") was trying to protect against a confused exec of a truncated interpreter path. However, it was overeager and also refused to truncate arguments as well, which broke userspace, and it was reverted. This attempts the protection again, but allows arguments to remain truncated. In an effort to improve readability, helper functions and comments have been added. Co-developed-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Samuel Dionne-Riel <samuel@dionne-riel.com> Cc: Richard Weinberger <richard.weinberger@gmail.com> Cc: Graham Christensen <graham@grahamc.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by:
-
Theodore Ts'o authored
[ Upstream commit 6e589291 ] A malicious/clueless root user can use EXT4_IOC_SWAP_BOOT to force a corner casew which can lead to the file system getting corrupted. There's no usefulness to allowing this, so just prohibit this case. Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Lucas A. M. Magalhães authored
[ Upstream commit 5515e414 ] Remove unused but set variables to clean up the code and avoid warning. Signed-off-by:
Lucas A. M. Magalhães <lucmaga@gmail.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit f6ef4e0e ] The init sequence for ALC294 headphone stuff is needed not only for the boot up time but also for the resume from hibernation, where the device is switched from the boot kernel without sound driver to the suspended image. Since we record the PM event in the device power_state field, we can now recognize the call pattern and apply the sequence conditionally. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Ronnie Sahlberg authored
[ Upstream commit eca00452 ] We should add any credits granted to us from unmatched server responses. Signed-off-by:
Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
-
Pavel Shilovsky authored
[ Upstream commit bb1bccb6 ] There are a couple places where we still account for 4 bytes in the beginning of SMB2 packet which is not true in the current code. Fix this to use a header preamble size where possible. Signed-off-by:
-
James Smart authored
[ Upstream commit 2a0fb340 ] Current code incorrectly specifies a completion wait timeout duration in 5 jiffies, when it should have been 5 seconds. Fix the adjust for units for the completion timeout call. [mkp: manual merge] Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Nir Dotan authored
[ Upstream commit 48ebab31 ] The LAG port collecting (receive) function was mistakenly set when the port was registered as a LAG member, while it should be set only when the port collection state is set to true. Set LAG port to collecting when it is set to distributing, as described in the IEEE link aggregation standard coupled control mux machine state diagram. Signed-off-by:
Nir Dotan <nird@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Hanjun Guo authored
[ Upstream commit 0ecc471a ] HiSilicon Taishan v110 CPUs didn't implement CSV3 field of the ID_AA64PFR0_EL1 and are not susceptible to Meltdown, so whitelist the MIDR in kpti_safe_list[] table. Signed-off-by:
Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by:
John Garry <john.garry@huawei.com> Reviewed-by:
Zhangshaokun <zhangshaokun@hisilicon.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Hanjun Guo authored
commit efd00c72 upstream. Adding the MIDR encodings for HiSilicon Taishan v110 CPUs, which is used in Kunpeng ARM64 server SoCs. TSV110 is the abbreviation of Taishan v110. Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sam Ravnborg authored
[ Upstream commit 189927e7 ] Add support for specifying the xtal load capacitance in the DT node. The pcf8523 supports xtal load capacitance of 7pF or 12.5pF. If the rtc has the wrong configuration the time will drift several hours/week. The driver use the default value 12.5pF. The DT may specify either 7000fF or 12500fF. (The DT uses femto Farad to avoid decimal numbers). Other values are warned and the driver uses the default value. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Jan-Marek Glogowski authored
[ Upstream commit 4fdc1790 ] On plug-in of my USB-C device, its USB_SS_PORT_LS_SS_INACTIVE link state bit is set. Greping all the kernel for this bit shows that the port status requests a warm-reset this way. This just happens, if its the only device on the root hub, the hub therefore resumes and the HCDs status_urb isn't yet available. If a warm-reset request is detected, this sets the hubs event_bits, which will prevent any auto-suspend and allows the hubs workqueue to warm-reset the port later in port_event. Signed-off-by:
Jan-Marek Glogowski <glogow@fbihome.de> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Jussi Laako authored
[ Upstream commit 202e69e6 ] XMOS/Thesycon family of USB Audio Class firmware flags DSD altsetting separate from the PCM ones. Thus the DSD altsetting can be auto-detected based on the flag and doesn't need maintaining specific altsetting whitelist. In addition, static VID:PID-to-altsetting whitelisting causes problems when firmware update changes the altsetting, or same VID:PID is reused for another device that has different kind of firmware. This patch removes existing explicit whitelist mappings for XMOS VID (0x20b1) and Thesycon VID (0x152a). Also corrects placement of Hegel HD12 and NuPrime DAC-10 to keep list sorted based on VID. Signed-off-by:
Jussi Laako <jussi@sonarnerd.net> Signed-off-by:
-
Felipe Balbi authored
[ Upstream commit acbfa6c2 ] We must wait until End Transfer completes in order to clear DWC3_EP_TRANSFER_STARTED, otherwise we may confuse the driver. This patch is in preparation to fix a rare race condition that happens upon Disconnect Interrupt. Tested-by:
Thinh Nguyen <thinhn@synopsys.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Felipe Balbi authored
[ Upstream commit 9f45581f ] There is a rare race condition that may happen during a Disconnect Interrupt if we have a started request that happens to be dequeued *after* completion of End Transfer command. If that happens, that request will be left waiting for completion of an End Transfer command that will never happen. If End Transfer command has already completed before, we are safe to giveback the request straight away. Tested-by:
-
Daniel T. Lee authored
[ Upstream commit d59dd69d ] When NULL pointer accidentally passed to write_kprobe_events, due to strlen(NULL), segmentation fault happens. Changed code returns -1 to deal with this situation. Bug issued with Smatch, static analysis. Signed-off-by:
Daniel T. Lee <danieltimlee@gmail.com> Acked-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Rodrigo Rivas Costa authored
[ Upstream commit 6b538cc2 ] When using this driver with the wireless dongle and some usermode program that monitors every input device (acpid, for example), while another usermode client opens and closes the low-level device repeadedly, the system eventually deadlocks. The reason is that steam_input_register_device() must not be called with the mutex held, because the input subsystem has its own synchronization that clashes with this one: it is possible that steam_input_open() is called before input_register_device() returns, and since steam_input_open() needs to lock the mutex, it deadlocks. However we must hold the mutex when calling any function that sends commands to the controller. If not, random commands end up falling fail. Reported-by:
Simon Gene Gottlieb <simon@gottliebtfreitag.de> Signed-off-by:
Rodrigo Rivas Costa <rodrigorivascosta@gmail.com> Tested-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Rodrigo Rivas Costa authored
[ Upstream commit cf28aee2 ] There is a new firmware for the Steam Controller with support for BLE connections. When using such a device with a wired connection, it reboots itself every 10 seconds unless an application has opened it. Doing hid_hw_open() unconditionally on probe fixes the issue, and the code becomes simpler. Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit a1aa09be ] Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
-
NOGUCHI Hiroshi authored
[ Upstream commit a767ffea ] Add ASUS Transbook T100CHI/T90CHI keyboard dock into battery quirk list, in order to add specific implementation in hid-asus. Signed-off-by:
NOGUCHI Hiroshi <drvlabo@gmail.com> Signed-off-by:
-
Sergio Paracuellos authored
[ Upstream commit 0ca1f908 ] Instead of reimplement afunction to do 'dt_node_to_map' task like 'rt2880_pinctrl_dt_node_to_map' make use of 'pinconf_generic_dt_node_to_map_all' generic function for this task. Also use its equivalent function for free which is 'pinconf_generic_dt_free_map'. Remove 'rt2880_pinctrl_dt_node_to_map' function which is not needed anymore. This decrease a bit driver LOC and make it more generic. To properly compile this changes 'GENERIC_PINCONF' option is selected with the driver in its Kconfig file. This also fix a problem with function 'rt2880_pinctrl_dt_node_to_map' which was calling internally 'pinctrl_utils_reserve_map' which expects 'num_maps' to be initialized. It does a memory allocation based on the value, and triggers the following warning if is not properly set: if (unlikely(order >= MAX_ORDER)) { WARN_ON_ONCE(!(gfp_mask & __GFP_NOWARN)); return NULL; } Generic function 'pinconf_generic_dt_node_to_map_all' initializes properly 'num_maps' to zero fixing the problem. Fixes: e12a1a6e ("staging: mt7621-pinctrl: refactor rt2880_pinctrl_dt_node_to_map function") Reported-by:
NeilBrown <neil@brown.name> Tested-by:
Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by:
-
Brian Norris authored
[ Upstream commit ff64dd48 ] git-diff-index does not refresh the index for you, so using it for a "-dirty" check can give misleading results. Commit 6147b1cf ("scripts/setlocalversion: git: Make -dirty check more robust") tried to fix this by switching to git-status, but it overlooked the fact that git-status also writes to the .git directory of the source tree, which is definitely not kosher for an out-of-tree (O=) build. That is getting reverted. Fortunately, git-status now supports avoiding writing to the index via the --no-optional-locks flag, as of git 2.14. It still calculates an up-to-date index, but it avoids writing it out to the .git directory. So, let's retry the solution from commit 6147b1cf using this new flag first, and if it fails, we assume this is an older version of git and just use the old git-diff-index method. It's hairy to get the 'grep -vq' (inverted matching) correct by stashing the output of git-status (you have to be careful about the difference betwen "empty stdin" and "blank line on stdin"), so just pipe the output directly to grep and use a regex that's good enough for both the git-status and git-diff-index version. Cc: Christian Kujau <lists@nerdbynature.de> Cc: Guenter Roeck <linux@roeck-us.net> Suggested-by:
Alexander Kapshuk <alexander.kapshuk@gmail.com> Signed-off-by:
Brian Norris <briannorris@chromium.org> Tested-by:
Genki Sky <sky@genki.is> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Yi Wang authored
[ Upstream commit 8b627f61 ] The registered clks should unregister when something wrong happens before going out in function clk_boston_setup(). Signed-off-by:
Yi Wang <wang.yi59@zte.com.cn> Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Abhishek Ambure authored
[ Upstream commit 7ba31e6e ] Hostapd uses CCMP, GCMP & GCMP-256 as 'wpa_pairwise' option to run WPA3. In WCN3990 firmware cipher suite numbers 9 to 11 are for CCMP, GCMP & GCMP-256. To enable CCMP, GCMP & GCMP-256 cipher suites in WCN3990 firmware, host sets 'n_cipher_suites = 11' while initializing hardware parameters. Tested HW: WCN3990 Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1 Signed-off-by:
Abhishek Ambure <aambure@codeaurora.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Ville Syrjälä authored
[ Upstream commit 6a310618 ] We lose even config space access when we power gate the ISP via the PUNIT. That makes lspci & co. produce gibberish. To fix that let's try to implement actual runtime pm hooks and inform the pci core that the device always goes to D3cold. That will cause the pci core to resume the device before attempting config space access. This introduces another annoyance though. We get the following error every time we try to resume the device: intel_atomisp2_pm 0000:00:03.0: Refused to change power state, currently in D3 The reason being that the pci core tries to put the device back into D0 via the standard PCI PM mechanism before calling the driver resume hook. To fix this properly we'd need to infiltrate the platform pm hooks (could turn ugly real fast), or use pm domains (which don't seem to exist on x86), or some extra early resume hook for the driver (which doesn't exist either). So maybe we just choose to live with the error? Cc: Hans de Goede <hdegoede@redhat.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Darren Hart <dvhart@infradead.org> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Ville Syrjälä authored
[ Upstream commit 8a7d7141 ] If the ISP is exposed as a PCI device VLV machines need the same treatment as CHV machines to power gate the ISP. Otherwise s0ix will not work. Cc: Hans de Goede <hdegoede@redhat.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Darren Hart <dvhart@infradead.org> Signed-off-by:
-
Hans de Goede authored
[ Upstream commit f8f80744 ] The Odys Winbook 13 uses a SIPODEV SP1064 touchpad, which does not supply descriptors, add this to the DMI descriptor override list, fixing the touchpad not working. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1526312Reported-by:
Rene Wagner <redhatbugzilla@callerid.de> Signed-off-by:
-
Kai-Heng Feng authored
[ Upstream commit 1475af25 ] While using Elan touchpads, the message floods: [ 136.138487] i2c_hid i2c-DELL08D6:00: i2c_hid_get_input: incomplete report (14/65535) Though the message flood is annoying, the device it self works without any issue. I suspect that the device in question takes too much time to pull the IRQ back to high after I2C host has done reading its data. Since the host receives all useful data, let's ignore the input report when there's no data. Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
Kai-Heng Feng authored
[ Upstream commit 86c31524 ] LG touchscreen (1fd2:8001) stops working after reboot: [ 4.859153] i2c_hid i2c-SAPS2101:00: i2c_hid_get_input: incomplete report (64/66) [ 4.936070] i2c_hid i2c-SAPS2101:00: i2c_hid_get_input: incomplete report (64/66) [ 9.948224] i2c_hid i2c-SAPS2101:00: failed to reset device. The device in question stops working after receives SLEEP, ON, SLEEP commands in a short period. The scenario is like this: - Once the desktop session closes, it also closed the hid device, so the device gets runtime suspended and receives a SLEEP command. - Before calling shutdown callback, it gets runtime resumed and received an ON command. - In the shutdown callback, it receives another SLEEP command. I failed to find a reliable interval between ON/SLEEP commands that can make it work, so let's simply disable runtime PM for the device. Signed-off-by:
-
