Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Conflicts:
	net/wireless/reg.c

Conflicts:
	drivers/net/wireless/iwlwifi/pcie/drv.c

Putting the context id of the primary phy context in
the placeholder of the secondary is obviously a bad
idea.
Spotted by smatch.

Fixes: dac94da8 ("iwlwifi: mvm: new BT Coex API")
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

Reported by "make includecheck"

Tested that the corresponding sources still compile well on x86
Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

If the firmware image that we attempt to load doesn't
actually exist we have a broken firmware file or other
code not checking things correctly, so warn in such a
case. Also avoid assigning cur_ucode/ucode_loaded then.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

When writing the disable_power_off value, the LPRX
enable value also gets written unintentionally, so
fix that by adding the missing break statement.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

This can be useful when using the device as a sniffer.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

Having a WARN_ON() followed by a printed message is
less useful than having the message in the warning
so move the message.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

When we disassociate, mac80211 removes the station and
then, it sets the bss it unsets the assoc bool in bss_info.

Since the firwmware wants it the opposite (first set the
MAC context as unassoc, and only then, remove the STA of
the API), we have a small period of time in which the STA
in firmware doesn't have a valid ieee80211_sta pointer.
During that time, iwl_mvm_vif->ap_sta_id, is still set
to the STA in firmware that represent the AP.

This avoids:

[ 4481.476246] BUG: unable to handle kernel NULL pointer dereference at 00000045
[ 4481.479521] IP: [<f8416a6a>] iwl_mvm_bt_coex_reduced_txp+0x7a/0x190 [iwlmvm]
[ 4481.482023] *pde = 00000000
[ 4481.484332] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
[ 4481.486897] Modules linked in: netconsole configfs autofs4 rfcomm(O) bnep(O) nfsd nfs_acl auth_rpcgss exportfs nfs lockd binfmt_misc sunrpc fscache arc4 iwlmvm(O) mac80211(O) btusb(O) iwlwifi(O) bluetooth(O) cfg80211(O) snd_hda_codec_hdmi coretemp dell_wmi snd_hda_codec_idt compat(O) dell_laptop aesni_intel i915 sparse_keymap dcdbas cryptd psmouse serio_raw aes_i586 microcode snd_hda_intel drm_kms_helper snd_hda_codec drm snd_pcm snd_timer i2c_algo_bit video intel_agp intel_gtt snd soundcore snd_page_alloc crc32c_intel ahci sdhci_pci libahci sdhci mmc_core e1000e xhci_hcd [last unloaded: configfs]
[ 4481.502983]
[ 4481.505599] Pid: 6507, comm: kworker/0:1 Tainted: G           O 3.4.43-dev #1 Dell Inc. Latitude E6430/0CMDYV
[ 4481.508575] EIP: 0060:[<f8416a6a>] EFLAGS: 00010246 CPU: 0
[ 4481.511248] EIP is at iwl_mvm_bt_coex_reduced_txp+0x7a/0x190 [iwlmvm]
[ 4481.513947] EAX: ffffffea EBX: 00000002 ECX: 00000001 EDX: 00000001
[ 4481.516710] ESI: ec6f0f28 EDI: 00000000 EBP: e8175dfc ESP: e8175d9c
[ 4481.519445]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[ 4481.522185] CR0: 8005003b CR2: 00000045 CR3: 01a5e000 CR4: 001407d0
[ 4481.524950] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[ 4481.527768] DR6: ffff0ff0 DR7: 00000400
[ 4481.530565] Process kworker/0:1 (pid: 6507, ti=e8174000 task=e8032b20 task.ti=e8174000)
[ 4481.533447] Stack:
[ 4481.536379]  e472439f 00003a12 e8032b20 e8033048 00000001 e8175ddc 00000246 e8033040
[ 4481.540132]  00000002 01814990 ec4d1ddc e8175dcc 00000000 00000000 00000000 00000000
[ 4481.543867]  00000000 00000000 00000001 000001c8 009b0002 ec4d1ddc ec6f0f28 00000000
[ 4481.547633] Call Trace:
[ 4481.550578]  [<f8418027>] iwl_mvm_bt_rssi_event+0x197/0x220 [iwlmvm]
[ 4481.553537]  [<f840919c>] iwl_mvm_stat_iterator+0xdc/0x240 [iwlmvm]
[ 4481.556582]  [<f8d129c2>] __iterate_active_interfaces+0xe2/0x1f0 [mac80211]
[ 4481.559544]  [<f84090c0>] ? iwl_mvm_update_smps+0x90/0x90 [iwlmvm]
[ 4481.562519]  [<f84090c0>] ? iwl_mvm_update_smps+0x90/0x90 [iwlmvm]
[ 4481.565498]  [<f8d12b0c>] ieee80211_iterate_active_interfaces+0x3c/0x50 [mac80211]
[ 4481.568421]  [<f8409b43>] iwl_mvm_rx_statistics+0xb3/0x130 [iwlmvm]
[ 4481.571349]  [<f8405431>] iwl_mvm_async_handlers_wk+0xc1/0xf0 [iwlmvm]
[ 4481.574251]  [<c1052915>] ? process_one_work+0x105/0x5c0
[ 4481.577162]  [<c1052991>] process_one_work+0x181/0x5c0
[ 4481.580025]  [<c1052915>] ? process_one_work+0x105/0x5c0
[ 4481.582861]  [<f8405370>] ? iwl_mvm_rx_fw_logs+0x20/0x20 [iwlmvm]
[ 4481.585722]  [<c10530f1>] worker_thread+0x121/0x2c0
[ 4481.588536]  [<c1052fd0>] ? rescuer_thread+0x1d0/0x1d0
[ 4481.591323]  [<c105af0d>] kthread+0x7d/0x90
[ 4481.594059]  [<c105ae90>] ? flush_kthread_worker+0x120/0x120
[ 4481.596868]  [<c15b7cc2>] kernel_thread_helper+0x6/0x10
[ 4481.599605] Code: 9d de c3 c8 85 c0 74 0d 80 3d f8 ae 42 f8 00 0f 84 dc 00 00 00 8b 45 c8 0f b6 d3 31 ff 89 55 c0 8b 84 90 d8 03 00 00 0f b6 55 c7 <38> 50 5b 89 45 bc 0f 84 a8 00 00 00 a1 e4 d2 04 c2 85 c0 0f 84
[ 4481.611782] EIP: [<f8416a6a>] iwl_mvm_bt_coex_reduced_txp+0x7a/0x190 [iwlmvm] SS:ESP 0068:e8175d9c
[ 4481.614985] CR2: 0000000000000045
[ 4481.687441] ---[ end trace b11bc915fbac4412 ]---
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

The number of commands can never be negative, so it should
be using an unsigned type. This also shuts up an smatch
warning elsewhere in the code.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

Change old UAPSD bit to PM_CMD_SUPPORT, and add a new bit to indicate
real UAPSD support.
Don't use UAPSD when the firmware doesn't support it.
Signed-off-by: David Spinadel <david.spinadel@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

The nl80211 attribute NL80211_ATTR_CSA_C_OFF_BEACON should be nested
inside NL80211_ATTR_CSA_IES, but commit ee4bc9e7
("nl80211: enable IBSS support for channel switch announcements")
added a check in the outer message attributes.

Fix channel switch calls by removing the erroneus condition.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
[reword commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211_hwsim canceled beacon_timer on any vif changing from enabled
to disabled beaconing. This breaks cases where there are multiple
beaconing vifs and only one of them is removed. Fix this by tracking
beaconing status per vif and disable beacon_timer only if no active vif
remain with beaconing enabled.
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

CSA completion could call in a driver
bss_info_changed() with a garbled `changed` flag
leading to all sorts of problems.
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Trigger the mesh channel switching procedure if the mesh STA
happens to miss the CSA action frame but able to receive the
beacon containing the CSA and MCSP elements from its peer
mesh STAs.
Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com>
[fix locking in ieee80211_mesh_process_chnswitch()]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Implement the required procedures for mesh channel switching as defined
in the IEEE Std 802.11-2012 section 10.9.8.4.3 and also handle the CSA
and MCSP elements as followed:
 * Add the function for updating the beacon and probe response frames
   with CSA and MCSP elements during the period of switching to the new
   channel. Both CSA and MCSP elements must be included in beacon and
   probe response frames until the intended channel switch time.
 * The ifmsh->csa_settings is set to NULL and the CSA and MCSP elements
   will then be removed from the beacon or probe response frames once the
   new channel is switched to.
Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Allow the triggering of CSA frame using mesh interface. The
rules are more or less same with IBSS, such as not allowed to
change between the band and channel width has to be same from
the previous mode. Also, move the ieee80211_send_action_csa
to a common space so that it can be re-used by mesh interface.
Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Process the CSA frame according to the procedures define in IEEE Std
802.11-2012 section 10.9.8.4.3 as follow:
* The mesh channel switch parameters element (MCSP) must be availabe.
* If the MCSP's TTL is 1, drop the frame but still process the CSA.
* If the MCSP's precedence value is less than or equal to the current
  precedence value, drop the frame and do not process the CSA.
* The CSA frame is forwarded after TTL is decremented by 1 and the
  initiator field is set to 0. Transmit restrict field and others
  are maintained as is.
* No beacon or probe response frame are handled here.

Also, introduce the debug message used for mesh CSA purpose.
Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Refactor the channel switch IE parsing to reduce the number
of function parameters.
Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

This can be used by a driver to prepare skbs for transmission, which were
obtained via functions such as ieee80211_probereq_get or
ieee80211_nullfunc_get.

This is useful for drivers that want to send those frames directly, but
need rate control information to be prepared first.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Drivers can now use this to parse the regulatory request and
be more verbose when needed.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

This patch fixes errors in the mesh powersave logic which
cause that remote peers do not get peer power mode change
notifications and mesh peer service periods (MPSPs) got
stuck.

When closing a peer link, set the (now invalid) peer-specific
power mode to 'unknown'.

Avoid overhead when local power mode is unchanged.

Reliably clear MPSP flags on peering status update.

Avoid MPSP flags getting stuck by not requesting a further
MPSP ownership if we already are an MPSP owner.
Signed-off-by: Marco Porsch <marco@cozybit.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

6c17b77b ensures that a device's
mac80211 queues will remain stopped while offchannel. Since the
vif can no longer be offchannel when the queues wake it's not
necessary to check for this before waking its netdev queues.
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Including ACPI ID for Broadcom GPS receiver BCM4752.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Rhyland Klein <rklein@nvidia.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

This will add the relevant values like the gpios and the
type in rfkill_gpio_platform_data to the rfkill_gpio_data
structure. It will allow those values to be easily picked
from DT and ACPI tables later.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Rhyland Klein <rklein@nvidia.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

This sets the direction of the gpio once when it's requested,
and uses the spinlock-safe gpio_set_state() to change the
state.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Rhyland Klein <rklein@nvidia.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Use a simple flag to see the state of the clock, and make
the clock available even without a name. Also, get rid of
HAVE_CLK dependency.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Rhyland Klein <rklein@nvidia.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

And remove now unneeded resource freeing.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Rhyland Klein <rklein@nvidia.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Two functions were changed but their references weren't
updated in the docbook template, propagate the change.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Document the IEEE80211_HW_SUPPORTS_HT_CCK_RATES flag.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Allow changing to DFS channels if the channel is available for
beaconing and userspace controls DFS operation.

Channel switch announcement from other stations on DFS channels will
be interpreted as radar event. These channels will then be marked as
unvailable.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

To use DFS in IBSS mode, userspace is required to react to radar events.
It can inform nl80211 that it is capable of doing so by adding a
NL80211_ATTR_HANDLE_DFS attribute when joining the IBSS.

This attribute is supplied to let the kernelspace know that the
userspace application can and will handle radar events, e.g. by
intiating channel switches to a valid channel. DFS channels may
only be used if this attribute is supplied and the driver supports
it. Driver support will be checked even if a channel without DFS
will be initially joined, as a DFS channel may be chosen later.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
[fix attribute name in commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

When the driver requests to move to STATIC or DYNAMIC SMPS,
we send an action frame to each associated station and
reconfigure the channel context / driver.
Of course, non-MIMO stations are ignored.

The beacon isn't updated. The association response will
include the original capabilities. Stations that associate
while in non-OFF SMPS mode will get an action frame right
after association to inform them about our current state.
Note that we wait until the end of the EAPOL. Sending an
action frame before the EAPOL is finished can be an issue
for a few clients. Clients aren't likely to send EAPOL
frames in MIMO anyway.

When the SMPS configuration gets more permissive (e.g.
STATIC -> OFF), we don't wake up stations that are asleep
We remember that they don't know about the change and send
the action frame when they wake up.

When the SMPS configuration gets more restrictive (e.g.
OFF -> STATIC), we set the TIM bit for every sleeping STA.
uAPSD stations might send MIMO until they poll the action
frame, but this is for a short period of time.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
[fix vht streams loop, initialisation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

In order to reconfigure the correct reg domain on
recovery, we have to save the current configuration
before clearing it (wl->reg_ch_conf_pending is
considered before configuring a new regdomain).
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>

wlcore configures different dwell times according to number
of active interfaces (in order to prevent hurting VO during
scan).

However, determining active vif only according to
bss_conf->idle is not explicit enough, and might result
in non-started vifs being counted as started as well
(e.g. unassociated sta during sta).

Fix it by checking for explicit conditions according
to the vif type.
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>

Make sure the FW is awake when entering recovery. This is useful for
reading the FW panic log and also some FW registers giving us crash
report stats.

We must do this before interrupts are disabled since we rely on an
interrupt to complete the wakeup.

If the wakeup fails, continue recovery normally. All read/writes will be
blocked and won't do any harm.
Signed-off-by: Barak Bercovitz <barak@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>