Some of these messages are missing the terminating '\n' and most of them
have the quoted string split across lines.

Change all of them to dev_err() messages and fix the issues.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This function is only called during the board attach to determine the
pacer clock speed for the boards capable of bursting.

Absorb it into the caller and remove the attach noise.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert this printk message into a dev_err().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver probes the board id during the attach to ensure that the
user is attempting to attach to the correct board type. Currently an
error message is output if the ids are not consistent but the attach
continues anyway.

Make the attach fail if the id bits do not match. Also, cleanup the
printk messages and use a dev_err() only if the probe fails.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add the suffix _REG to all the register defines to better indicate
what they are.

Add a prefix to all the register bit defines to avoid namespace clashes
and to better indicate what they are.

Tidy up the whitesapce.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The 8255 digital i/o subdevice is only available on some of the boards
supported by this driver. Currently the 'i8255_offset' member of the
boardinfo is used to indicate that it is available.

To clarify this support, add a 'has_8255' bit-field flag to the boardinfo.
We can then use this flag to conditionally allocate the space for the
subdevice only when it is needed.

Also, make sure to check that subdev_8255_init() is successful and propagate
any errors.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All the boards supported by this driver have an 8254 timer at offset
0x0c. Remove this unused information from the boardinfo.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Now that the boardinfo does not require any forward declarations,
move it near the definition of the struct.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The timer is only started by the ai subdevice in das16_cmd_exec()
and this function can only be called if the device is attached.

Remove the unnecessary sanity check.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, move some of the functions to make the code easier
to follow.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Factor out the loop that waits for the ai conversion to complete.

Tidy up the function a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Introduce a couple helper functions to enable and disable the
analog input interrupt/dma conversions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is just extra cruft. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This variable is not used in the driver. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This define is not used in the driver. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If the boardinfo 'size' is > 0x400 it indicates that the board has
additional registers that allow bursting of analog input data.

To better indicate this add a flag to the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As indicated by checkpatch.pl, "WARNING: Use of volatile is usually
wrong: ...". The variables in the private data that are marked
volatile don't need to be. Remove the volatile.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This macro outputs some printk() debug info that is just added noise.
Remove it as well as the DEBUG stuff.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This function just prints some development debug information. There is
no reason to leave this in the final driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These members in the private data are only used during the board attach.

Move the reading of the status register to the board attach and just
check the value where needed when initializing the analog input subdevice.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This struct is not used by the driver. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup the whitespace in the tables.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All the boards supported by this driver that have analog outputs use
the same function to handle the (*insn_write) for the subdevice. They
all also have 12-bit resolution (maxdata = 0x0fff).

Remove the 'ao' and 'ao_nbits' members from the boardinfo and replace
them with a simple bit-field flag 'has_ao'.

Tidy up the subdevice init a bit as well as the (*insn_write) function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All the boards supported by this driver have digital outputs and all
of then use the same function to handle the (*insn_bits) for the
subdevice.

Remove the 'do_' member from the boardinfo and always initialize the
digital output subdevice during the board attach.

Tidy up the subdevice init a bit as well as the (*insn_bits) function.
Remove SDF_READABLE from the subdev_flags. This is a pure digital output
subdevice and the outputs are not readable.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All the boards supported by this driver have digital inputs and all
of then use the same function to handle the (*insn_bits) for the
subdevice.

Remove the 'di' member from the boardinfo and always initialize the
digital input subdevice during the board attach.

Tidy up the subdevice init a bit as well as the (*insn_bits) function.
The (*insn_bits) function does not need to clear data[0].
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The subdevice functions that used this boardinfo can use the subdevice
's->maxdata' value instead. Tidy up those functions.

Change the boardinfo so that the calculation is not needed during the
attach.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All the boards supported by this driver have analog inputs and all
of then use the same function to handle the (*insn_read) for the
subdevice.

Remove the 'ai' member from the boardinfo and always initalize the
analog input subdevice during the board attach.

Tidy up the subdevice init a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

DMA support is optional in this driver. To enable it, the user
passes the desired DMA channel during the board attach. A timer
is then used by the driver to periodically get the analog input
data from the DMA.

Since the DMA support is optional, modify the init code so that
it only fails if the DMA channel is unavailable or the DMA buffers
can not be allocated. Don't fail just because the user passed an
invalid DMA channel (only DMA channels 1 and 3 are valid).

Remove the printk() noise about the DMA. Change the printk() when
the request_dma() fails into a dev_err().

Move the timer initialization so it's only setup if DMA is available.
It's not needed otherwise. Also, only hook up the subdevice command
support functions if DMA is available. This allows removing a couple
sanity checks in the command support.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As noted in the driver, a timer is always used by this driver to handle
the DMA because samples could be dropped while waiting for the DMA done
interrupt.

Remove the irq setup code as well as the interrupt handler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As noted in the driver, a timer is always used by this driver to handle the
DMA due to buggy DMA controllers and the lack of a hardware fifo in some of
the supported boards.

Remove all the non-timer mode specific code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The FB_OLPC_DCON help section is to short according to checkpatch.pl.
We want more information about the controller type, its task, its video
pipeline position and so on.

There are no style issues, remove checkpatch.pl TODO entry.
Signed-off-by: Jens Frederich <jfrederich@gmail.com>
Acked-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The debug file is opened with single_open(), but there's no
single_release().
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The debug file is opened with single_open(), but there's no
single_release().
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The driver uses the tty layer, so explicitly say that, to prevent
randomconfig build errors.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reformat the high-level documentation to human readable plain text by
removing HTML and other tags.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Delete CVS keyword markers.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert "@return" to "Returns: ".
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert "@param name" inside comments to "@name:".
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Delete duplicated function call documentation from the .h file. These
functions are just internal anyway, and the .h file will be completely
removed in the future when the driver will be made a single self-contained
.c file.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>