- 18 Aug, 2019 1 commit
-
-
Hans de Goede authored
The KIOX010A and KIOX020A ACPI ids go hand in hand, they are used in yoga style 2-in-1s, with KIOX010A indicating the KXCJ91008 sensor in the display of the 2-in-1 and KIOX020A indicating the KXCJ91008 sensor in the base. Improve the existing comment on the "KIOX010A" kx_acpi_match table entry to make clear we are talking about a yoga-style (360 degree hinges) device here and add a similar comment to the "KIOX020A" entry. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
- 15 Aug, 2019 8 commits
-
-
Greg Kroah-Hartman authored
There is some "confusing" license text in some of the sm750fb driver files. After discussing it with the company, it turns out to have been a mistake and these lines can be safely removed. The files are all to be licensed under the GPLv2 license. Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Cc: Teddy Wang <teddy.wang@siliconmotion.com> Cc: linux-fbdev@vger.kernel.org Cc: devel@driverdev.osuosl.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20190815123009.16499-1-gregkh@linuxfoundation.orgSigned-off-by:
-
Gao Xiang authored
As Chao pointed out [1], ENOTSUPP is used for NFS protocol only, we should use EOPNOTSUPP instead... [1] https://lore.kernel.org/lkml/108ee2f9-75dd-b8ab-8da7-b81c17bafbf6@huawei.com/Reported-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Gao Xiang <gaoxiang25@huawei.com> Reviewed-by:
-
Gao Xiang authored
For some specific fields, use EOPNOTSUPP instead of EIO for values which look sane but aren't supported right now. Reviewed-by:
-
Gao Xiang authored
Previously, EROFS uses EIO to indicate that filesystem is corrupted as well. However, as Pavel said [1], other filesystems tend to use EUCLEAN(EFSCORRUPTED) instead, let's follow what others do right now. Also, add some more prints to the syslog. [1] https://lore.kernel.org/lkml/20190813114821.GB11559@amd/Suggested-by:
Pavel Machek <pavel@denx.de> Reviewed-by:
-
Colin Ian King authored
Variable fx2delay is being initialized with a value that is never read and fx2delay is being re-assigned a little later on. The assignment is redundant and hence can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20190815105314.5756-1-colin.king@canonical.comSigned-off-by:
-
Colin Ian King authored
There is a statement that is indented one level too deeply, remove the extraneous tab. Addresses-Coverity: ("Identation does not match nesting level") Signed-off-by: -
Nishka Dasgupta authored
Static structure apex_desc, of type gasket_driver_desc, is used only as an argument to the functions gasket_register_device() and gasket_unregister_device(). In the definitions of both these functions, their parameter is declared as const. Hence make apex_desc itself constant to protect it from modification. Issue found with Coccinelle. Signed-off-by:
Nishka Dasgupta <nishkadg.linux@gmail.com> Link: https://lore.kernel.org/r/20190815054924.643-1-nishkadg.linux@gmail.comSigned-off-by:
-
Pratik Shinde authored
in fill_inode() we call iloc() twice.Avoiding the extra call by storing the result. Signed-off-by:
Pratik Shinde <pratikshinde320@gmail.com> Reviewed-by:
-
- 14 Aug, 2019 21 commits
-
-
Ioana Ciornei authored
Link settings can be changed only when the interface is down. Disable and re-enable the interface, if necessary, behind the scenes so that we do not force users to an if down/up sequence. Reported-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://lore.kernel.org/r/1565700187-16048-11-git-send-email-ioana.ciornei@nxp.comSigned-off-by:
-
Ioana Ciornei authored
The register_netdev() call should be made only when ready to process any user request on the interface. Move the call to be the last one issued in the probe sequence. Reported-by:
-
Ioana Ciornei authored
In the current state, the dpaa2-ethsw driver supports only one bridge per DPSW object. Reword the error message so that this information is much more clear. Suggested-by:
-
Ioana Ciornei authored
The ethsw_add_vlan() function is already called only when the VLAN is not yet configured on the switch. Remove the redundant check. Reported-by:
-
Ioana Ciornei authored
The ethtool core already zeroes the memory before calling .get_ethtool_stats() thus making the memset unnecessary. Remove it. Reported-by:
-
Ioana Ciornei authored
Use a bool instead of an u8 in ethsw_set_learning() and ethsw_port_set_flood() to encode an binary type property. Reported-by:
-
Ioana Ciornei authored
Since ethtool will be loud enough if the .set_link_ksettings() callback fails, remove the debug messages which do not add additional information. Reported-by:
-
Ioana Ciornei authored
Add the '\n' line terminator to the string formats missing it. Reported-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Ioana Ciornei authored
At probe time, only the DPSW object should be enabled without the associated ports, which will get enabled on dev_open. Remove the ethsw_open() and ethsw_stop() functions and replace them only with dpsw_enable()/_disable(). Reported-by:
-
Ioana Ciornei authored
Do not add an IGMP multicast address by default since we do not support Rx/Tx ar the moment. Reported-by:
-
Colin Ian King authored
Variable ret is initialized to a value that is never read and it is re-assigned later. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: -
Merwin Trever Ferrao authored
When the checkpatch.pl script was run, it showed lines with length more than 80 characters in rtl8712_recv.c file. Fixed by breaking it up into two lines within 80 characters. Signed-off-by:
Merwin Trever Ferrao <merwintf@gmail.com> Link: https://lore.kernel.org/r/20190813065806.GA23606@IoT-COESigned-off-by:
-
Nishka Dasgupta authored
Change return type of r8712_dump_aggr_xframe from u8 to void as it always returns _SUCCESS and its return value is never used. Signed-off-by:
-
Nishka Dasgupta authored
Change return type of r8712_xmitframe_aggr_1st from u8 to void as it always returns _SUCCESS and its return value is never used. Signed-off-by:
-
Nishka Dasgupta authored
Change return type of r8712_append_mpdu_unit from u8 to void and remove its return statement as it always returns only _SUCCESS. Modify call sites to simply call this function instead of checking its return value, and execute all the statements in the if-block for when the function returns _SUCCESS. Signed-off-by:
-
Nishka Dasgupta authored
Change return values of xmitframe_addmic from _SUCCESS and _FAIL to 0 and -ENOMEM respectively. Modify call sites to check for non-zero values instead of _FAIL. Also change return type from sint to int. Signed-off-by:
-
Kai-Heng Feng authored
The procfs provides many useful information for debugging, but it may be too much for normal usage, routines like proc_get_sec_info() reports various security related information. So let's remove it. Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20190813042426.13733-1-kai.heng.feng@canonical.comSigned-off-by:
-
Gao Xiang authored
Kill all the remaining BUG_ON in EROFS: - one BUG_ON was used to detect xattr on-disk corruption, proper error handling should be added for it instead; - the other BUG_ONs are used to detect potential issues, use DBG_BUGON only in (eng) debugging version. Signed-off-by:
-
Gao Xiang authored
cleancache was not fully implemented in EROFS. In addition, it's tend to remove the whole cleancache in related attempt [1]. [1] https://lore.kernel.org/linux-fsdevel/20190527103207.13287-3-jgross@suse.com/Signed-off-by:
-
Gao Xiang authored
As a helper in erofs_fs.h, erofs_inode_is_data_compressed() should be inlined. Signed-off-by:
-
Jonathan Cameron authored
This got caught by the implicit fall through detection but is a bug rather than missing marking. Reported-by: 0-DAY kernel test infrastructure Signed-off-by:
-
- 12 Aug, 2019 10 commits
-
-
Greg Kroah-Hartman authored
Merge tag 'iio-for-5.4a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First set of new device support, features and cleanups for IIO in the 5.4 cycle Note includes a merge from i3c tree to get support needed for stm_lsm6dsx driver support for l3c devices. Done from immutable branch. A counter subsystem patche in here as well. Alongside the new device support (which is always good), Chuhong's work on using devres managed APIs has cleaned up a number of drivers. New device support * adis16460 - New driver based on ADIS framework which needed addition of support for cs_change_delay. Includes device tree binding. * cros_ec - Support fo the veyron-minnie which uses an older interface. * lsm6dsx - Support for LSM6DSTR-C gyro + magnetometer sensor (new IDs mainly) - Support for ISM330DHCX acc + gyro sensor (extensive rework needed!) * Maxim 5432 - New driver support MAX5432-MAX5435 family of potentiometers. * noa1305 - New driver for this ON Semiconductor Ambient light sensor. Features and cleanups * tree wide - Drop error prints after platform_get_irq as already prints errors internally if any occur. * docs - Document mounting matrix. - Fix a missing newline at end of file. * ad2s1210 - Switch to device managed APIs for all of probe and drop explicit remove. * ad7192 - Add of_device_id array to explicity handling DT bindings. * ad7606 - Lots of rework leading to support for software configure modes in ad7616 parts. - Debugfs register access support. * am2315 - Switch to device managed APIs for all of probe and drop explicit remove. * apds9960 - Typo in module description. * cm36651 - Convert to i2c_new_dummy_device. - Swithc to device managed APIs for all of probe adn drop explicit remove. * cros_ec - Calibscale support for accel, gyro and magnetometer. - Tidy up some error codes to return the error from the stack rather than -EIO. - Determine protocol version. - Add a sign vector to the core to fix sensor rotation if necessary. Cannot just be done with mount matrix as already in use in many devices. - Tidy up INFO_SCALE being in both the separate and shared lists. - Drop a lot of dplicate code from the cros-ec-accel-legacy driver and use the core provided code instead. - Make frequency range available to userspace. * counter / ftm-quaddec - Switch to device managed APIs for all of probe adn drop explicit remove. * hdc100x - Switch to device managed APIs for all of probe and drop explicit remove. * hi8435 - Use gpiod_set_value_cansleep as we don't care here and there is a board out there where it needs to sleep. - Switch to device managed APIs for all of probe and drop explict remove. * hp03 - Convert to i2c_new_dummy_device. * maxim thermocouple - Switch to device managed APIs for all of probe and drop explicit remove. * mmc35240 - Fix typo in constant naming. * mpu6050 - Use devm_add_action_or_reset in place of explicit error handling. - Make text in Kconfig more explicit about which parts are supported. * mxc4005 - Switch to device managed APIs for all of probe and drop explicit remove. * pms7003 - Convert device tree bindings to yaml. - Add a MAINTAINERS entry * sc27xx - Introduce a local struct device *dev pointer to avoid lots of deref. - Use devm_add_action_or_reset in place of explicit error handling. * sca3000 - Typo fix in naming. * si1145 - Switch to device managed APIs for all of probe and drop explicit remove. * st_sensors - Lots of rework to enable switch to regmap. - Regmap conversion at the end. - Tidy up some inconsistencies in buffer setup ops. - Tidy up an oddity by dropping get_irq_data_ready function in favour of direct access. - Stop allocating buffer in buffer enable in favour of just embedding a large enough constant size buffer in the iio_priv accessed structure. * st_lsm6dsx - l3c device support (LSM6DSO and LSM6DSR) - tidy up irq return logic which was strangely written. - fix up an ABI quirk where this driver used separate scale attributes, even though they were always shared by type. * stk33xx - Device tree bindings include manufacturer ID. * stm32-adc - Add control for supply to analog switches including DT bindings. * stm32 timer - Drop the quadrature mode support. Believed there were no users so take this opportunity to drop this unwanted ABI. * tsl2772 - Switch to device mangage APIs for all of probe and drop explicit remove. - Use regulator_bulk_* APIs to reduce repitition. * veml6070 - Convert to i2c_new_dummy_device. * tag 'iio-for-5.4a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (84 commits) iio: hi8435: Drop hi8435_remove() by using devres for remaining elements iio: hi8435: Use gpiod_set_value_cansleep() iio:st_sensors: remove buffer allocation at each buffer enable iio: imu: inv_mpu6050: be more explicit on supported chips iio: light: noa1305: Add support for NOA1305 dt-bindings: Add binding document for NOA1305 iio: remove get_irq_data_ready() function pointer and use IRQ number directly iio: imu: st_lsm6dsx: make IIO_CHAN_INFO_SCALE shared by type iio: tsl2772: Use regulator_bulk_() APIs iio: tsl2772: Use devm_iio_device_register iio: tsl2772: Use devm_add_action_or_reset for tsl2772_chip_off iio: tsl2772: Use devm_add_action_or_reset iio: Remove dev_err() usage after platform_get_irq() iio: light: si1145: Use device-managed APIs iio:pressure: preenable/postenable/predisable fixup for ST press buffer iio:magn: preenable/postenable/predisable fixup for ST magn buffer iio:gyro: preenable/postenable/predisable fixup for ST gyro buffer iio:accel: preenable/postenable/predisable fixup for ST accel buffer dt-bindings: iio: imu: st_lsm6dsx: add ism330dhcx device bindings iio: imu: st_lsm6dsx: add support to ISM330DHCX ...
-
Stephen Brennan authored
Used checkpatch's --fix-inplace option for types SPACING, OPEN_BRACE, ELSE_AFTER_BRACE. Manually edited the resulting changes to correct for mistaken fixes and complete fixes that were only partially applied. Signed-off-by:
Stephen Brennan <stephen@brennan.io> Link: https://lore.kernel.org/r/20190811225120.7308-1-stephen@brennan.ioSigned-off-by:
-
Nishka Dasgupta authored
Change return type of r8712_construct_txaggr_cmd_hdr from u8 to void as it always returns _SUCCESS and its return value is never used. Signed-off-by:
-
Nishka Dasgupta authored
Change return type of r8712_construct_txaggr_cmd_desc from u8 to void (and remove its return statement) as it always returns _SUCCESS and its return value is never stored, checked or otherwise used. Signed-off-by:
-
Nishka Dasgupta authored
Change return type of r8712_xmit_direct from int to void as its return value is never used. Remove return statement accordingly. Signed-off-by:
-
Nishka Dasgupta authored
Change return type of r8712_free_xmitbuf from int to void (and remove its return values) as its return value is never used. Signed-off-by:
-
Nishka Dasgupta authored
Change return values of make_wlanhdr from _SUCCESS/_FAIL to 0/-EINVAL. Modify call site to check for non-zero return values instead of _FAIL. Change return type from sint to int. Signed-off-by:
-
Nishka Dasgupta authored
Change return values of r8712_update_attrib from _SUCCESS and _FAIL to 0 and -ENOMEM or -EINVAL respectively. Modify call site to check for the new failure conditions. Also modify the return type from sint to int. Signed-off-by:
-
Nishka Dasgupta authored
Change the return values in _r8712_init_xmit_priv from _SUCCESS/_FAIL to 0/-ENOMEM respectively. Change return type from sint to int. Signed-off-by:
-
Adham Abozaeid authored
return -EIO for bus failures, 0 otherwise. Signed-off-by:
Adham Abozaeid <adham.abozaeid@microchip.com> Link: https://lore.kernel.org/r/20190809182510.22443-3-adham.abozaeid@microchip.comSigned-off-by:
-
