The commit c5adde94 ("netlink:
eliminate nl_sk_hash_lock") breaks the autobind retry mechanism
because it doesn't reset portid after a failed netlink_insert.

This means that should autobind fail the first time around, then
the socket will be stuck in limbo as it can never be bound again
since it already has a non-zero portid.

Fixes: c5adde94 ("netlink: eliminate nl_sk_hash_lock")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
The following patchset contains Netfilter fixes for your net tree, they are:

1) Fix a leak in IPVS, the sysctl table is not released accordingly when
   destroying a netns, patch from Tommi Rantala.

2) Fix a build error when TPROXY and socket are built-in but IPv6 defrag is
   compiled as module, from Florian Westphal.

3) Fix TCP tracket wrt. RFC5961 challenge ACK when in LAST_ACK state, patch
   from Jesper Dangaard Brouer.

4) Fix a bogus WARN_ON() in nf_tables when deleting a set element that stores
   a map, from Mirek Kratochvil.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

RGMII interfaces come in multiple flavors: RGMII with transmit or
receive internal delay, no delays at all, or delays in both direction.

This change extends the initial check for PHY_INTERFACE_MODE_RGMII to
cover all of these variants since EEE should be allowed for any of these
modes, since it is a property of the RGMII, hence Gigabit PHY capability
more than the RGMII electrical interface and its delays.

Fixes: a59a4d19 ("phy: add the EEE support and the way to access to the MMD registers")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Once we get a neighbour through looking up arp cache or creating a
new one in rocker_port_ipv4_resolve(), the neighbour's refcount is
already taken. But as we don't put the refcount again after it's
used, this makes the neighbour entry leaked.
Suggested-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

The values 0x00000000-0xfffffeff are reserved for userspace datatype. When,
deleting set elements with maps, a bogus warning is triggered.

WARNING: CPU: 0 PID: 11133 at net/netfilter/nf_tables_api.c:4481 nft_data_uninit+0x35/0x40 [nf_tables]()

This fixes the check accordingly to enum definition in
include/linux/netfilter/nf_tables.h

Fixes: https://bugzilla.netfilter.org/show_bug.cgi?id=1013Signed-off-by: Mirek Kratochvil <exa.exa@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

In compliance with RFC5961, the network stack send challenge ACK in
response to spurious SYN packets, since commit 0c228e83 ("tcp:
Restore RFC5961-compliant behavior for SYN packets").

This pose a problem for netfilter conntrack in state LAST_ACK, because
this challenge ACK is (falsely) seen as ACKing last FIN, causing a
false state transition (into TIME_WAIT).

The challenge ACK is hard to distinguish from real last ACK.  Thus,
solution introduce a flag that tracks the potential for seeing a
challenge ACK, in case a SYN packet is let through and current state
is LAST_ACK.

When conntrack transition LAST_ACK to TIME_WAIT happens, this flag is
used for determining if we are expecting a challenge ACK.

Scapy based reproducer script avail here:
 https://github.com/netoptimizer/network-testing/blob/master/scapy/tcp_hacks_3WHS_LAST_ACK.py

Fixes: 0c228e83 ("tcp: Restore RFC5961-compliant behavior for SYN packets")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

With TPROXY=y but DEFRAG_IPV6=m we get build failure:

net/built-in.o: In function `tproxy_tg_init':
net/netfilter/xt_TPROXY.c:588: undefined reference to `nf_defrag_ipv6_enable'

If DEFRAG_IPV6 is modular, TPROXY must be too.
(or both must be builtin).

This enforces =m for both.
Reported-and-tested-by: Liu Hua <liusdu@126.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Describe the handler for RXUBR better with a new comment.
Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com>
Reviewied-by: Josh Cartwright <joshc@ni.com>
Reviewied-by: Ben Shelton <ben.shelton@ni.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

RTNH_F_EXTERNAL today is printed as "offload" in iproute2 output.

This patch renames the flag to be consistent with what the user sees.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With a cross-compiler based on gcc-4.9, I see warnings like the following:

  drivers/net/ethernet/mellanox/mlx4/resource_tracker.c: In function 'mlx4_SW2HW_CQ_wrapper':
  drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:3048:10: error: 'cq' may be used uninitialized in this function [-Werror=maybe-uninitialized]
    cq->mtt = mtt;

I think the warning is spurious because we only use cq when
cq_res_start_move_to() returns zero, and it always initializes *cq in that
case.  The srq case is similar.  But maybe gcc isn't smart enough to figure
that out.

Initialize cq and srq explicitly to avoid the warnings.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It was reported that trancerout6 would cause
a kernel to crash when trying to compute checksums
on raw UDP packets.  The cause was the check in
__ip6_append_data that would attempt to use
partial checksums on the packet.  However,
raw sockets do not initialize partial checksum
fields so partial checksums can't be used.

Solve this the same way IPv4 does it.  raw sockets
pass transhdrlen value of 0 to ip_append_data which
causes the checksum to be computed in software.  Use
the same check in ip6_append_data (check transhdrlen).
Reported-by: Wolfgang Walter <linux@stwm.de>
CC: Wolfgang Walter <linux@stwm.de>
CC: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netlink sockets creation and deletion heavily modify nl_table_users
and nl_table_lock.

If nl_table is sharing one cache line with one of them, netlink
performance is really bad on SMP.

ffffffff81ff5f00 B nl_table
ffffffff81ff5f0c b nl_table_users

Putting nl_table in read_mostly section increased performance
of my open/delete netlink sockets test by about 80 %

This came up while diagnosing a getaddrinfo() problem.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently vlan notifier handler will try to update all vlans
for a device when that device comes up.  A problem occurs,
however, when the vlan device was set to promiscuous, but not
by the user (ex: a bridge).  In that case, dev->gflags are
not updated.  What results is that the lower device ends
up with an extra promiscuity count.  Here are the
backtraces that prove this:
[62852.052179]  [<ffffffff814fe248>] __dev_set_promiscuity+0x38/0x1e0
[62852.052186]  [<ffffffff8160bcbb>] ? _raw_spin_unlock_bh+0x1b/0x40
[62852.052188]  [<ffffffff814fe4be>] ? dev_set_rx_mode+0x2e/0x40
[62852.052190]  [<ffffffff814fe694>] dev_set_promiscuity+0x24/0x50
[62852.052194]  [<ffffffffa0324795>] vlan_dev_open+0xd5/0x1f0 [8021q]
[62852.052196]  [<ffffffff814fe58f>] __dev_open+0xbf/0x140
[62852.052198]  [<ffffffff814fe88d>] __dev_change_flags+0x9d/0x170
[62852.052200]  [<ffffffff814fe989>] dev_change_flags+0x29/0x60

The above comes from the setting the vlan device to IFF_UP state.

[62852.053569]  [<ffffffff814fe248>] __dev_set_promiscuity+0x38/0x1e0
[62852.053571]  [<ffffffffa032459b>] ? vlan_dev_set_rx_mode+0x2b/0x30
[8021q]
[62852.053573]  [<ffffffff814fe8d5>] __dev_change_flags+0xe5/0x170
[62852.053645]  [<ffffffff814fe989>] dev_change_flags+0x29/0x60
[62852.053647]  [<ffffffffa032334a>] vlan_device_event+0x18a/0x690
[8021q]
[62852.053649]  [<ffffffff8161036c>] notifier_call_chain+0x4c/0x70
[62852.053651]  [<ffffffff8109d456>] raw_notifier_call_chain+0x16/0x20
[62852.053653]  [<ffffffff814f744d>] call_netdevice_notifiers+0x2d/0x60
[62852.053654]  [<ffffffff814fe1a3>] __dev_notify_flags+0x33/0xa0
[62852.053656]  [<ffffffff814fe9b2>] dev_change_flags+0x52/0x60
[62852.053657]  [<ffffffff8150cd57>] do_setlink+0x397/0xa40

And this one comes from the notification code.  What we end
up with is a vlan with promiscuity count of 1 and and a physical
device with a promiscuity count of 2.  They should both have
a count 1.

To resolve this issue, vlan code can use dev_get_flags() api
which correctly masks promiscuity and allmulti flags.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) Handle max TX power properly wrt VIFs and the MAC in iwlwifi, from
    Avri Altman.

 2) Use the correct FW API for scan completions in iwlwifi, from Avraham
    Stern.

 3) FW monitor in iwlwifi accidently uses unmapped memory, fix from Liad
    Kaufman.

 4) rhashtable conversion of mac80211 station table was buggy, the
    virtual interface was not taken into account.  Fix from Johannes
    Berg.

 5) Fix deadlock in rtlwifi by not using a zero timeout for
    usb_control_msg(), from Larry Finger.

 6) Update reordering state before calculating loss detection, from
    Yuchung Cheng.

 7) Fix off by one in bluetooth firmward parsing, from Dan Carpenter.

 8) Fix extended frame handling in xiling_can driver, from Jeppe
    Ledet-Pedersen.

 9) Fix CODEL packet scheduler behavior in the presence of TSO packets,
    from Eric Dumazet.

10) Fix NAPI budget testing in fm10k driver, from Alexander Duyck.

11) macvlan needs to propagate promisc settings down the the lower
    device, from Vlad Yasevich.

12) igb driver can oops when changing number of rings, from Toshiaki
    Makita.

13) Source specific default routes not handled properly in ipv6, from
    Markus Stenberg.

14) Use after free in tc_ctl_tfilter(), from WANG Cong.

15) Use softirq spinlocking in netxen driver, from Tony Camuso.

16) Two ARM bpf JIT fixes from Nicolas Schichan.

17) Handle MSG_DONTWAIT properly in ring based AF_PACKET sends, from
    Mathias Kretschmer.

18) Fix x86 bpf JIT implementation of FROM_{BE16,LE16,LE32}, from Alexei
    Starovoitov.

19) ll_temac driver DMA maps TX packet header with incorrect length, fix
    from Michal Simek.

20) We removed pm_qos bits from netdevice.h, but some indirect
    references remained.  Kill them.  From David Ahern.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (90 commits)
  net: Remove remaining remnants of pm_qos from netdevice.h
  e1000e: Add pm_qos header
  net: phy: micrel: Fix regression in kszphy_probe
  net: ll_temac: Fix DMA map size bug
  x86: bpf_jit: fix FROM_BE16 and FROM_LE16/32 instructions
  netns: return RTM_NEWNSID instead of RTM_GETNSID on a get
  Update be2net maintainers' email addresses
  net_sched: gred: use correct backlog value in WRED mode
  pppoe: drop pppoe device in pppoe_unbind_sock_work
  net: qca_spi: Fix possible race during probe
  net: mdio-gpio: Allow for unspecified bus id
  af_packet / TX_RING not fully non-blocking (w/ MSG_DONTWAIT).
  bnx2x: limit fw delay in kdump to 5s after boot
  ARM: net: delegate filter to kernel interpreter when imm_offset() return value can't fit into 12bits.
  ARM: net fix emit_udiv() for BPF_ALU | BPF_DIV | BPF_K intruction.
  mpls: Change reserved label names to be consistent with netbsd
  usbnet: avoid integer overflow in start_xmit
  netxen_nic: use spin_[un]lock_bh around tx_clean_lock (2)
  net: xgene_enet: Set hardware dependency
  net: amd-xgbe: Add hardware dependency
  ...

Commit e2c65448 removed pm_qos from struct net_device but left the
comment and header file. Remove those.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit e2c65448 moved pm_qos_req to e1000_adapter. Add the header file
that defines the struct.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Thomas Graf <tgraf@suug.ch>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Don't do clock-mode-select if clk == NULL,
since when building without CONFIG_HAVE_CLK,
clk_get returns NULL and clk_get_rate returns 0.

Doing clock-mode-select in this cause causes kszphy_probe to
return -EINVAL and thus prevents the device from being probed.

The original code (before regression) would return 0
when building without CONFIG_HAVE_CLK.

Cc: stable <stable@vger.kernel.org> # 3.18+
Fixes: 1fadee0c ("net/phy: micrel: Add clock support for
KSZ8021/KSZ8031")
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Niklas Cassel <niklass@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

DMA allocates skb->len instead of headlen
which is used for DMA.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

FROM_BE16:
'ror %reg, 8' doesn't clear upper bits of the register,
so use additional 'movzwl' insn to zero extend 16 bits into 64

FROM_LE16:
should zero extend lower 16 bits into 64 bit

FROM_LE32:
should zero extend lower 32 bits into 64 bit

Fixes: 89aa0758 ("net: sock: allow eBPF programs to be attached to sockets")
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull MIPS fixes from Ralf Baechle:
 "One build fix for build breakage of all MIPS SMP kernels caused by
  Rusty's fix of obsolete use of cpu mask helpers, another to fix the FP
  ABI selection when loading an ELF binary"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: fix FP mode selection in lieu of .MIPS.abiflags data
  MIPS: SMP: Fix build error.

Pull rdma fixes from Doug Ledford:
 - update MAINTAINERS git repo pointer
 - printk garbage fix
 - fix for qib and iw_cxgb4 bugs introduced in 4.1 window
 - fix for an older iWARP netlink bug
 - fix a memcpy issue in ehca driver

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
  infiniband: Remove duplicated KERN_<LEVEL> from pr_<level> uses
  IB/qib: fix test of unsigned variable
  RDMA/core: Fix for parsing netlink string attribute
  MAINTAINERS: update the official rdma git repo
  iw_cxgb4: use wildcard mapping for getting remote addr info
  IB/ehca: use correct destination for memcpy

Usually, RTM_NEWxxx is returned on a get (same as a dump).

Fixes: 0c7aecd4 ("netns: add rtnl cmd to add and get peer netns ids")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull power supply and reset fixes from Sebastian Reichel:
 "misc fixes"

* tag 'for-v4.1-rc' of git://git.infradead.org/battery-2.6:
  power: bq27x00_battery: Add missing MODULE_ALIAS
  power: reset: Add MFD_SYSCON depends for brcmstb
  power: reset: ltc2952: Remove bogus hrtimer_start() return value checks
  power_supply: fix oops in collie_battery driver
  power/reset: at91: fix return value check in at91_reset_platform_probe()
  MAINTAINERS: Add me as maintainer of Nokia N900 power supply drivers
  axp288_fuel_gauge: Add original author details

These KERN_<LEVEL> uses are unnecessary with pr_<level> and cause
bad logging output so remove them.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Commit d4988623 ("IB/qib: use arch_phys_wc_add()")
adjusted mtrr inititialization to use the new interface.

Unfortunately, the new interface returns a signed
value and the patch tested the unsigned wc_cookie.

Fix the issue by changing the type of wc_cookie to int.  For
the success case the ret left at zero to avoid
a warning from the caller.  For failure wc_cookie
is used as the ret.
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

The string iwpm_ulib_name is recorded in a nlmsg as a netlink attribute.
Without this fix parsing of the nlmsg by the userspace port mapper service fails
because of unknown attribute length, causing the port mapper service not to
register the client, which has sent the nlmsg.
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Cc: <stable@vger.kernel.org> #v3.16
Reviewed-By: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Commit 46490b57 ("MIPS: kernel: elf: Improve the overall ABI and FPU
mode checks") reworked the ELF FP ABI mode selection logic, but when
CONFIG_MIPS_O32_FP64_SUPPORT is enabled it breaks the use of binaries
which have no PT_MIPS_ABIFLAGS program header & associated
.MIPS.abiflags section.

A default mode is selected based upon whether the ELF contains MIPS32 or
MIPS64 code, but that selection is made in arch_elf_pt_proc.
arch_elf_pt_proc only executes when a PT_MIPS_ABIFLAGS program header is
found. If one is not found then arch_elf_pt_proc is never called, and no
default overall_fp_mode value is selected. When arch_check_elf is
called, both abi0 & abi1 are MIPS_ABI_FP_UNKNOWN which leads to both
prog_req & interp_req being set to none_req. none_req matches none of
the conditions for mode selection at the end of arch_check_elf, so
overall_fp_mode is left untouched. Finally once mips_set_personality_fp
is called the BUG() in the default case is then hit & the kernel likely
panics.

Fix this by moving the selection of a default overall mode to the start
of arch_check_elf, which runs once per ELF executed regardless of
whether it has a PT_MIPS_ABIFLAGS program header.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Matthew Fortune <matthew.fortune@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # v4.0+
Patchwork: http://patchwork.linux-mips.org/patch/9978/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Emulex developers' email addresses are now "@avagotech" instead of
"@emulex". I'm also replacing Subbu with Padmanabh and Sriharsha in the
maintainers list. The driver's heading was outdated and did not include
some of the chip types (BE3, Lancer and Skyhawk) that the driver has
been supporting for a longtime. I've updated this too.
Signed-off-by: Sathya Perla <sathya.perla@avagotech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

  CC      arch/mips/kernel/smp.o
arch/mips/kernel/smp.c: In function ‘start_secondary’:
arch/mips/kernel/smp.c:149:2: error: passing argument 2 of ‘cpumask_set_cpu’ discards ‘volatile’ qualifier from pointer target type [-Werror]
  cpumask_set_cpu(cpu, &cpu_callin_map);
  ^
In file included from ./arch/mips/include/asm/processor.h:14:0,
                 from ./arch/mips/include/asm/thread_info.h:15,
                 from include/linux/thread_info.h:54,
                 from include/asm-generic/preempt.h:4,
                 from arch/mips/include/generated/asm/preempt.h:1,
                 from include/linux/preempt.h:18,
                 from include/linux/interrupt.h:8,
                 from arch/mips/kernel/smp.c:24:
include/linux/cpumask.h:272:91: note: expected ‘struct cpumask *’ but argument is of type ‘volatile struct cpumask_t *’
 static inline void cpumask_set_cpu(unsigned int cpu, struct cpumask *dstp)
                                                                                           ^
arch/mips/kernel/smp.c: In function ‘smp_prepare_boot_cpu’:
arch/mips/kernel/smp.c:211:2: error: passing argument 2 of ‘cpumask_set_cpu’ discards ‘volatile’ qualifier from pointer target type [-Werror]
  cpumask_set_cpu(0, &cpu_callin_map);
  ^
In file included from ./arch/mips/include/asm/processor.h:14:0,
                 from ./arch/mips/include/asm/thread_info.h:15,
                 from include/linux/thread_info.h:54,
                 from include/asm-generic/preempt.h:4,
                 from arch/mips/include/generated/asm/preempt.h:1,
                 from include/linux/preempt.h:18,
                 from include/linux/interrupt.h:8,
                 from arch/mips/kernel/smp.c:24:
include/linux/cpumask.h:272:91: note: expected ‘struct cpumask *’ but argument is of type ‘volatile struct cpumask_t *’
 static inline void cpumask_set_cpu(unsigned int cpu, struct cpumask *dstp)
                                                                                           ^
arch/mips/kernel/smp.c: In function ‘__cpu_up’:
arch/mips/kernel/smp.c:221:10: error: passing argument 2 of ‘cpumask_test_cpu’ discards ‘volatile’ qualifier from pointer target type [-Werror]
  while (!cpumask_test_cpu(cpu, &cpu_callin_map))
          ^
In file included from ./arch/mips/include/asm/processor.h:14:0,
                 from ./arch/mips/include/asm/thread_info.h:15,
                 from include/linux/thread_info.h:54,
                 from include/asm-generic/preempt.h:4,
                 from arch/mips/include/generated/asm/preempt.h:1,
                 from include/linux/preempt.h:18,
                 from include/linux/interrupt.h:8,
                 from arch/mips/kernel/smp.c:24:
include/linux/cpumask.h:294:90: note: expected ‘const struct cpumask *’ but argument is of type ‘volatile struct cpumask_t *’
 static inline int cpumask_test_cpu(int cpu, const struct cpumask *cpumask)
                                                                                          ^
cc1: all warnings being treated as errors
make[2]: *** [arch/mips/kernel/smp.o] Error 1
make[1]: *** [arch/mips/kernel] Error 2
make: *** [arch/mips] Error 2
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Linus prefers kernel.org repos to github repos for security.
Signed-off-by: Doug Ledford <dledford@redhat.com>

Pull nfsd bugfixes from Bruce Fields:
 "Mainly pnfs fixes (and for problems with generic callback code made
  more obvious by pnfs)"

* 'for-4.1' of git://linux-nfs.org/~bfields/linux:
  nfsd: skip CB_NULL probes for 4.1 or later
  nfsd: fix callback restarts
  nfsd: split transport vs operation errors for callbacks
  svcrpc: fix potential GSSX_ACCEPT_SEC_CONTEXT decoding failures
  nfsd: fix pNFS return on close semantics
  nfsd: fix the check for confirmed openowner in nfs4_preprocess_stateid_op
  nfsd/blocklayout: pretend we can send deviceid notifications

For listening endpoints bound to the wildcard address, we need to pass
the wildcard address mapping to iwpm_get_remote_info() instead of the
mapped address of the new child connection.

Without this fix, and with iwarp port mapping enabled, each iw_cxgb4
connection that is spawned from a listening endpoint bound to the wildcard
address, will generate an annoying dmesg entry about failing to find
the remote address mapping info, and the connection state displayed in
debugfs under /sys/kernel/debug/iw_cxgb4/<pci-slot-no>/eps  will not have
the peer's address/port mapping info.  The connection still works though.

Fixes: 5b6b8fe6 ("RDMA/cxgb4: Report the actual address of the remote connecting peer")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Using an element of a struct as the address for the memcpy of the whole
struct may introduce a buffer overflow and does not help readability either
simply pass the real thing as first argument to memcpy.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Pull spi fixes from Mark Brown:
 "A number of driver specific fixes (including several missing
  dependencies for randconfig type cases) plus two core fixes.

  One makes the setup_transfer() callback optional which unbreaks some
  drivers which had been merged with it omitted due to local versions of
  this patch and another ensures that we don't corrupt data by leaking
  internal dummy buffers to callers, causing the callers to think they
  allocated those buffers"

* tag 'spi-fix-v4.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: fsl-espi: fix behaviour for full-duplex xfers
  spi: fsl-spi: fix devm_ioremap_resource() error case
  spi: Kconfig: Add SOC_LS1021A to SPI_FSL_DSPI dependence
  spi/omap2-mcpsi: Always call spi_finalize_current_message()
  spi: fsl-spi: use devm_ioremap_resource() to map parameter ram on CPM1
  spi: bitbang: Make setup_transfer() callback optional
  spi: check tx_buf and rx_buf in spi_unmap_msg
  spi: bcm2835: change timeout of polling driver to 1s
  spi: bcm2835: Add GPIOLIB dependency

Pull iommu fixes from Joerg Roedel:
 "Three fixes have queued up:

   - reference count fix in the AMD IOMMUv2 driver

   - sign extension fix in the ARM-SMMU driver

   - build fix for rockchip driver with device tree"

* tag 'iommu-fixes-v4.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/arm-smmu: Fix sign-extension of upstream bus addresses at stage 1
  iommu/rockchip: Fix build without CONFIG_OF
  iommu/amd: Fix bug in put_pasid_state_wait

Pull crypto fixes from Herbert Xu:
 "This fixes a the implementation of CRC32 on arm64 where it incorrectly
  applied negation on the result.

  It also fixes the arm64 implementations of SHA/SHA256 where in some
  cases it may end up finalising the result twice"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: arm64/sha2-ce - prevent asm code finalization in final() path
  crypto: arm64/sha1-ce - prevent asm code finalization in final() path
  crypto: arm64/crc32 - bring in line with generic CRC32

Pull libata fixes from Tejun Heo:
 "Rather big for fixes pull.

   - SCC controllers never lived to see the light of the day.  Both
     libata and ide drivers removed.

   - In some configurations, link power management policy changes
     sometimes cause delayed spurious PHY events which can develop into
     noticeable failures.  This has been reported several times over the
     years.  Gabriele's patches suppress PHY events for a while after
     LPM policy changes which should help most of these failures without
     causing too much problem for hotplug use cases.

   - A few controller specific fixes"

[ Hmm.  I don't think removing SSC support is really a "fix", but hey, it
  removes a lot of lines of code.  Which I like.  So ...  good riddance ]

* 'for-4.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ahci: avoton port-disable reset-quirk
  ata: select DW_DMAC in case of SATA_DWC
  libata: Blacklist queued TRIM on all Samsung 800-series
  libata: Ignore spurious PHY event on LPM policy change
  libata: Add helper to determine when PHY events should be ignored
  ata: ahci_st: fixup layering violations / drvdata errors
  Remove celleb-only SCC PATA drivers

Pull md bugfixes from Neil Brown:
 "A few fixes for md.

  Most of these are related to the new "batched stripe writeout", but
  there are a few others"

* tag 'md/4.1-rc3-fixes' of git://neil.brown.name/md:
  md/raid5: fix handling of degraded stripes in batches.
  md/raid5: fix allocation of 'scribble' array.
  md/raid5: don't record new size if resize_stripes fails.
  md/raid5: avoid reading parity blocks for full-stripe write to degraded array
  md/raid5: more incorrect BUG_ON in handle_stripe_fill.
  md/raid5: new alloc_stripe() to allocate an initialize a stripe.
  md-raid0: conditional mddev->queue access to suit dm-raid

In WRED mode, the backlog for a single virtual queue (VQ) should not be
used to determine queue behavior; instead the backlog is summed across
all VQs. This sum is currently used when calculating the average queue
lengths. It also needs to be used when determining if the queue's hard
limit has been reached, or when reporting each VQ's backlog via netlink.
q->backlog will only be used if the queue switches out of WRED mode.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

After receiving a PADT and the socket is closed, user space will no
longer drop the reference to the pppoe device.
This leads to errors like this:

[  488.570000] unregister_netdevice: waiting for eth0.2 to become free. Usage count = 2

Fixes: 287f3a94 ("pppoe: Use workqueue to die properly when a PADT is received")
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>