Pull ARM DT updates from Olof Johansson:
 "As usual, this is the massive branch we have for each release.  Lots
  of various updates and additions of hardware descriptions on existing
  hardware, as well as the usual additions of new boards and SoCs.

  This is also the first release where we've started mixing 64- and
  32-bit DT updates in one branch.

  (Specific details on what's actually here and new is pretty easy to
  tell from the diffstat, so there's little point in duplicating listing
  it here)"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (499 commits)
  ARM: dts: uniphier: add system-bus-controller nodes
  ARM64: juno: disable NOR flash node by default
  ARM: dts: uniphier: add outer cache controller nodes
  arm64: defconfig: Enable PCI generic host bridge by default
  arm64: Juno: Add support for the PCIe host bridge on Juno R1
  Documentation: of: Document the bindings used by Juno R1 PCIe host bridge
  ARM: dts: uniphier: add I2C aliases for ProXstream2 boards
  dts/Makefile: Add build support for LS2080a QDS & RDB board DTS
  dts/ls2080a: Add DTS support for LS2080a QDS & RDB boards
  dts/ls2080a: Update Simulator DTS to add support of various peripherals
  dts/ls2080a: Remove text about writing to Free Software Foundation
  dts/ls2080a: Update DTSI to add support of various peripherals
  doc: DTS: Update DWC3 binding to provide reference to generic bindings
  doc/bindings: Update GPIO devicetree binding documentation for LS2080A
  Documentation/dts: Move FSL board-specific bindings out of /powerpc
  Documentation: DT: Add entry for FSL LS2080A QDS and RDB boards
  arm64: Rename FSL LS2085A SoC support code to LS2080A
  arm64: Use generic Layerscape SoC family naming
  ARM: dts: uniphier: add ProXstream2 Vodka board support
  ARM: dts: uniphier: add ProXstream2 Gentil board support
  ...

Pull ARM SoC driver updates from Olof Johansson:
 "As we've enabled multiplatform kernels on ARM, and greatly done away
  with the contents under arch/arm/mach-*, there's still need for
  SoC-related drivers to go somewhere.

  Many of them go in through other driver trees, but we still have
  drivers/soc to hold some of the "doesn't fit anywhere" lowlevel code
  that might be shared between ARM and ARM64 (or just in general makes
  sense to not have under the architecture directory).

  This branch contains mostly such code:

   - Drivers for qualcomm SoCs for SMEM, SMD and SMD-RPM, used to
     communicate with power management blocks on these SoCs for use by
     clock, regulator and bus frequency drivers.

   - Allwinner Reduced Serial Bus driver, again used to communicate with
     PMICs.

   - Drivers for ARM's SCPI (System Control Processor).  Not to be
     confused with PSCI (Power State Coordination Interface).  SCPI is
     used to communicate with the assistant embedded cores doing power
     management, and we have yet to see how many of them will implement
     this for their hardware vs abstracting in other ways (or not at all
     like in the past).

   - To make confusion between SCPI and PSCI more likely, this release
     also includes an update of PSCI to interface version 1.0.

   - Rockchip support for power domains.

   - A driver to talk to the firmware on Raspberry Pi"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (57 commits)
  soc: qcom: smd-rpm: Correct size of outgoing message
  bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus
  bus: sunxi-rsb: Add Allwinner Reduced Serial Bus (RSB) controller bindings
  ARM: bcm2835: add mutual inclusion protection
  drivers: psci: make PSCI 1.0 functions initialization version dependent
  dt-bindings: Correct paths in Rockchip power domains binding document
  soc: rockchip: power-domain: don't try to print the clock name in error case
  soc: qcom/smem: add HWSPINLOCK dependency
  clk: berlin: add cpuclk
  ARM: berlin: dts: add CLKID_CPU for BG2Q
  ARM: bcm2835: Add the Raspberry Pi firmware driver
  soc: qcom: smem: Move RPM message ram out of smem DT node
  soc: qcom: smd-rpm: Correct the active vs sleep state flagging
  soc: qcom: smd: delete unneeded of_node_put
  firmware: qcom-scm: build for correct architecture level
  soc: qcom: smd: Correct SMEM items for upper channels
  qcom-scm: add missing prototype for qcom_scm_is_available()
  qcom-scm: fix endianess issue in __qcom_scm_is_call_available
  soc: qcom: smd: Reject send of too big packets
  soc: qcom: smd: Handle big endian CPUs
  ...

Pull ARM SoC platform updates from Olof Johansson:
 "New and/or improved SoC support for this release:

  Marvell Berlin:
     - Enable standard DT-based cpufreq
     - Add CPU hotplug support

  Freescale:
     - Ethernet init for i.MX7D
     - Suspend/resume support for i.MX6UL

  Allwinner:
     - Support for R8 chipset (used on NTC's $9 C.H.I.P board)

  Mediatek:
     - SMP support for some platforms

  Uniphier:
     - L2 support
     - Cleaned up SMP support, etc.

  plus a handful of other patches around above functionality, and a few
  other smaller changes"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (42 commits)
  ARM: uniphier: rework SMP operations to use trampoline code
  ARM: uniphier: add outer cache support
  Documentation: EXYNOS: Update bootloader interface on exynos542x
  ARM: mvebu: add broken-idle option
  ARM: orion5x: use mac_pton() helper
  ARM: at91: pm: at91_pm_suspend_in_sram() must be 8-byte aligned
  ARM: sunxi: Add R8 support
  ARM: digicolor: select pinctrl/gpio driver
  arm: berlin: add CPU hotplug support
  arm: berlin: use non-self-cleared reset register to reset cpu
  ARM: mediatek: add smp bringup code
  ARM: mediatek: enable gpt6 on boot up to make arch timer working
  soc: mediatek: Fix random hang up issue while kernel init
  soc: ti: qmss: make acc queue support optional in the driver
  soc: ti: add firmware file name as part of the driver
  Documentation: dt: soc: Add description for knav qmss driver
  ARM: S3C64XX: Use PWM lookup table for mach-smartq
  ARM: S3C64XX: Use PWM lookup table for mach-hmt
  ARM: S3C64XX: Use PWM lookup table for mach-crag6410
  ARM: S3C64XX: Use PWM lookup table for smdk6410
  ...

Pull ARM SoC cleanups from Olof Johansson:
 "Again we have a sizable (but not huge) cleanup branch with a net delta
  of about -3k lines.

  Main contents here is:

   - A bunch of development/cleanup of a few PXA boards
   - Removal of bockw platforms on shmobile, since the platform has now
     gone completely multiplatform.  Whee!
   - move of the 32kHz timer on OMAP to a proper timesource
   - Misc cleanup of older OMAP material (incl removal of one board
     file)
   - Switch over to new common PWM lookup support for several platforms

  There's also a handful of other cleanups across the tree, but the
  above are the major pieces"

* tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (103 commits)
  ARM: OMAP3: hwmod data: Remove legacy mailbox data and addrs
  ARM: DRA7: hwmod data: Remove spinlock hwmod addrs
  ARM: OMAP4: hwmod data: Remove spinlock hwmod addrs
  ARM: DRA7/AM335x/AM437x: hwmod: Remove gpmc address space from hwmod data
  ARM: Remove __ref on hotplug cpu die path
  ARM: Remove open-coded version of IRQCHIP_DECLARE
  arm: omap2: board-generic: use omap4_local_timer_init for AM437x
  ARM: DRA7/AM335x/AM437x: hwmod: Remove elm address space from hwmod data
  ARM: OMAP: Remove duplicated operand in OR operation
  clocksource: ti-32k: make it depend on GENERIC_CLOCKSOURCE
  ARM: pxa: remove incorrect __init annotation on pxa27x_set_pwrmode
  ARM: pxa: raumfeld: make some variables static
  ARM: OMAP: Change all cpu_is_* occurences to soc_is_* for id.c
  ARM: OMAP2+: Rename cpu_is macros to soc_is
  arm: omap2: timer: limit hwmod usage to non-DT boots
  arm: omap2+: select 32k clocksource driver
  clocksource: add TI 32.768 Hz counter driver
  arm: omap2: timer: rename omap_sync32k_timer_init()
  arm: omap2: timer: always call clocksource_of_init() when DT
  arm: omap2: timer: move realtime_counter_init() around
  ...

Pull ARM SoC non-urgent fixes from Olof Johansson:
 "A handful of fixes that came in and didn't seem warranted to go in
  through the 4.3-rc cycle.

   - MAINTAINERS updates for one of the Broadcom platforms and lpc18xx
   - A couple of non-critical Davinci bugfixes
   - A fix to reset irq affinity for TI platforms (silences a warning at
     reboot)"

* tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  MAINTAINERS: update lpc18xx entry with more drivers
  soc: ti: reset irq affinity before freeing irq
  ARM: cns3xxx: pci: avoid potential stack overflow
  ARM: davinci: clock: Correct return values for API functions
  ARM: davinci: re-use %*ph specifier
  MAINTAINERS: add entry for the Broadcom Northstar Plus SoCs

In commit a1c34a3b ("mm: Don't offset memmap for flatmem") Laura
fixed a problem for Srinivas relating to the bottom 2MB of RAM on an ARM
IFC6410 board.

One small wrinkle on ia64 is that it allocates the node_mem_map earlier
in arch code, so it skips the block of code where "offset" is
initialized.

Move initialization of start and offset before the check for the
node_mem_map so that they will always be available in the latter part of
the function.
Tested-by: Laura Abbott <laura@labbott.name>
Fixes: a1c34a3b (mm: Don't offset memmap for flatmem)
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull config fix for md from Neil Brown:
 "New config dependency needed as md/raid5 now uses crc32c"

* tag 'md/4.4-rc0-fix' of git://neil.brown.name/md:
  raid5-cache: add crc32c Kconfig dependency

Pull libnvdimm updates from Dan Williams:
 "Outside of the new ACPI-NFIT hot-add support this pull request is more
  notable for what it does not contain, than what it does.  There were a
  handful of development topics this cycle, dax get_user_pages, dax
  fsync, and raw block dax, that need more more iteration and will wait
  for 4.5.

  The patches to make devm and the pmem driver NUMA aware have been in
  -next for several weeks.  The hot-add support has not, but is
  contained to the NFIT driver and is passing unit tests.  The coredump
  support is straightforward and was looked over by Jeff.  All of it has
  received a 0day build success notification across 107 configs.

  Summary:

   - Add support for the ACPI 6.0 NFIT hot add mechanism to process
     updates of the NFIT at runtime.

   - Teach the coredump implementation how to filter out DAX mappings.

   - Introduce NUMA hints for allocations made by the pmem driver, and
     as a side effect all devm allocations now hint their NUMA node by
     default"

* tag 'libnvdimm-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  coredump: add DAX filtering for FDPIC ELF coredumps
  coredump: add DAX filtering for ELF coredumps
  acpi: nfit: Add support for hot-add
  nfit: in acpi_nfit_init, break on a 0-length table
  pmem, memremap: convert to numa aware allocations
  devm_memremap_pages: use numa_mem_id
  devm: make allocations numa aware by default
  devm_memremap: convert to return ERR_PTR
  devm_memunmap: use devres_release()
  pmem: kill memremap_pmem()
  x86, mm: quiet arch_add_memory()

Pull i2c updates from Wolfram Sang:

 - New drivers: UniPhier (with and without FIFO)

 - some drivers got some bigger rework: ismt, designware, img-scb (rcar
   had to be reverted because issues were showing up just lately)

 - ACPI: reworked the device scanning and added support for muxes

... and quite a lot of driver bugfixes and cleanups this time.  All
files touched outside of the i2c realm have proper acks.

* 'i2c/for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (70 commits)
  i2c: rcar: Revert the latest refactoring series
  i2c: pnx: remove superfluous assignment
  MAINTAINERS: i2c: drop i2c-pnx maintainer
  MAINTAINERS: i2c: mark also subdirectories as maintained
  i2c: cadence: enable driver for ARM64
  i2c: i801: Document Intel DNV and Broxton
  i2c: at91: manage unexpected RXRDY flag when starting a transfer
  i2c: pnx: Use setup_timer instead of open coding it
  i2c: add ACPI support for I2C mux ports
  acpi: add acpi_preset_companion() stub
  i2c: pxa: Add support for pxa910/988 & new configuration features
  i2c: au1550: Convert to devm_kzalloc and devm_ioremap_resource
  i2c-dev: Fix I2C_SLAVE ioctl comment
  i2c-dev: Fix typo in ioctl name reference
  i2c: sirf: tune the divider to make i2c bus freq more accurate
  i2c: imx: Use -ENXIO as error in the NACK case
  i2c: i801: Add support for Intel Broxton
  i2c: i801: Add support for Intel DNV
  i2c: mediatek: add i2c resume support
  i2c: imx: implement bus recovery
  ...

Pull watchdog update from Wim Van Sebroeck:

 - New driver for Broadcom 7038 Set-Top Box
 - imx2_wdt: Use register definition in regmap_write()
 - intel-mid: add Magic Closure flag
 - watchdog framework improvements:
      - Use device tree alias for naming watchdogs
      - propagate ping error code to the user space
      - Always evaluate new timeout against min_timeout
      - Use single variable name for struct watchdog_device
 - include clean-ups

* git://www.linux-watchdog.org/linux-watchdog:
  watchdog: include: add units for timeout values in kerneldoc
  watchdog: include: fix some typos
  watchdog: core: propagate ping error code to the user space
  watchdog: watchdog_dev: Use single variable name for struct watchdog_device
  watchdog: Always evaluate new timeout against min_timeout
  watchdog: intel-mid: add Magic Closure flag
  watchdog: imx2_wdt: Use register definition in regmap_write()
  watchdog: watchdog_dev: Use device tree alias for naming watchdogs
  watchdog: Watchdog driver for Broadcom Set-Top Box
  watchdog: bcm7038: add device tree binding documentation

Pull tiny hwmon update from Jean Delvare.

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: (k10temp) Remove duplicate pci-id define

Pull NTB bugfixes from Jon Mason:
 "NTB Bug fixes for potential NULL pointer accesses, accesses of a freed
  pointer, invalid buffer pointer, and a compiler warning.

  Also, unification of upstream/downstream addresses"

* tag 'ntb-4.4' of git://github.com/jonmason/ntb:
  NTB: fix 32-bit compiler warning
  NTB: unify translation addresses
  NTB: invalid buf pointer in multi-MW setups
  NTB: remove unused variable
  NTB: fix access of free-ed pointer
  NTB: Fix issue where we may be accessing NULL ptr

Pull dmaengine updates from Vinod Koul:
 "This time we have a very typical update which is mostly fixes and
  updates to drivers and no new drivers.

   - the biggest change is coming from Peter for edma cleanup which even
     caused some last minute regression, things seem settled now
   - idma64 and dw updates
   - iotdma updates
   - module autoload fixes for various drivers
   - scatter gather support for hdmac"

* tag 'dmaengine-4.4-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (77 commits)
  dmaengine: edma: Add dummy driver skeleton for edma3-tptc
  Revert "ARM: DTS: am33xx: Use the new DT bindings for the eDMA3"
  Revert "ARM: DTS: am437x: Use the new DT bindings for the eDMA3"
  dmaengine: dw: some Intel devices has no memcpy support
  dmaengine: dw: platform: provide platform data for Intel
  dmaengine: dw: don't override platform data with autocfg
  dmaengine: hdmac: Add scatter-gathered memset support
  dmaengine: hdmac: factorise memset descriptor allocation
  dmaengine: virt-dma: Fix kernel-doc annotations
  ARM: DTS: am437x: Use the new DT bindings for the eDMA3
  ARM: DTS: am33xx: Use the new DT bindings for the eDMA3
  dmaengine: edma: New device tree binding
  dmaengine: Kconfig: edma: Select TI_DMA_CROSSBAR in case of ARCH_OMAP
  dmaengine: ti-dma-crossbar: Add support for crossbar on AM33xx/AM43xx
  dmaengine: edma: Merge the of parsing functions
  dmaengine: edma: Do not allocate memory for edma_rsv_info in case of DT boot
  dmaengine: edma: Refactor the dma device and channel struct initialization
  dmaengine: edma: Get qDMA channel information from HW also
  dmaengine: edma: Merge map_dmach_to_queue into assign_channel_eventq
  dmaengine: edma: Correct PaRAM access function names (_parm_ to _param_)
  ...

Pull RTC updates from Alexandre Belloni:
 "Core:
   - Fix rtctest error path

  New drivers:
   - Microcrystal RV8803

  Subsystem wide cleanups:
   - remove misuse of IRQF_NO_SUSPEND flag

  Drivers:
   - at91rm9200: clear RTC alarm status flag prior to suspending
   - davinci: remove incorrect reference to probe function
   - ds1307: Fix alarm programming for mcp794xx
   - ds1390: trickle charger support, fix ds1390_get_reg
   - isl1208: Pass the IRQF_ONESHOT flag
   - opal: fix type of token
   - pcf2127: fix RTC_READ_VL, remove useless driver version
   - pcf85063: return an error when date is invalid
   - pcf8563: add CLKOUT to common clock framework
   - rx8025: remove unnecessary braces
   - s3c: Set year, month, day value for setting alarm
   - stmp3xxx: unify register access macros
   - License fixes: pcf2127, da9063
   - wakeup-source support for isl12057 and opal"

* tag 'rtc-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (23 commits)
  rtc: Add a driver for Micro Crystal RV8803
  rtc: s3c: Set year, month, day value for setting alarm
  rtc: ds1307: Fix alarm programming for mcp794xx
  rtc: isl12057: enable support for the standard "wakeup-source" property
  rtc: opal: enable support for the stardard "wakeup-source" property
  rtc: isl1208: Pass the IRQF_ONESHOT flag
  rtc: pcf8563: add CLKOUT to common clock framework
  rtc: davinci: remove incorrect reference to probe function
  rtc: at91rm9200: clear RTC alarm status flag prior to suspending
  rtc: pcf2127: remove useless driver version
  rtc: pcf2127: fix reading uninitialized value on RTC_READ_VL ioctl
  rtc: stmp3xxx: unify register access macros
  rtc: da9063: GPL copyright inconsistency fix
  rtc: pcf85063: return an error when date is invalid
  rtc: rx8025: remove unnecessary braces
  rtc: ds1343: remove misuse of IRQF_NO_SUSPEND flag
  rtc: ab8500: remove misuse of IRQF_NO_SUSPEND flag
  rtc: pl031: remove misuse of IRQF_NO_SUSPEND flag
  rtc: opal: fix type of token
  rtc: ds1390: Add trickle charger device tree binding
  ...

Pull fbdev updates from Tomi Valkeinen:
 - omap: fix hdmi audio configuration issue
 - ssd1307fb: add ssd1309 support
 - tridentfb: support DDC
 - gxt4500: enable support for non-PPC platforms

* tag 'fbdev-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
  radeonfb: Deinline large functions
  gxt4500: enable panning
  gxt4500: Use arch_phys_wc_* for framebuffer
  gxt4500: fix color order
  gxt4500: fix 16bpp 565 mode
  gxt4500: enable on non-PPC architectures
  tridentfb: Add DDC support
  fb_ddc: Allow I2C adapters without SCL read capability
  fbdev: ssd1307fb: add ssd1309 support
  fbdev: ssd1307fb: alphabetize headers
  video/omap: remove invalid check
  OMAPDSS: hdmi: Reconfigure and restart audio when display is enabled

Pull drm updates from Dave Airlie:
 "I Was Almost Tempted To Capitalise Every Word, but then I decided I
  couldn't read it myself!

  I've also got one pull request for the sti driver outstanding.  It
  relied on a commit in Greg's tree and I didn't find out in time, that
  commit is in your tree now so I might send that along once this is
  merged.

  I also had the accidental misfortune to have access to a Skylake on my
  desk for a few days, and I've had to encourage Intel to try harder,
  which seems to be happening now.

  Here is the main drm-next pull request for 4.4.

  Highlights:

  New driver:
        vc4 driver for the Rasberry Pi VPU.
        (From Eric Anholt at Broadcom.)

  Core:
        Atomic fbdev support
        Atomic helpers for runtime pm
        dp/aux i2c STATUS_UPDATE handling
        struct_mutex usage cleanups.
        Generic of probing support.

  Documentation:
        Kerneldoc for VGA switcheroo code.
        Rename to gpu instead of drm to reflect scope.

  i915:
        Skylake GuC firmware fixes
        HPD A support
        VBT backlight fallbacks
        Fastboot by default for some systems
        FBC work
        BXT/SKL workarounds
        Skylake deeper sleep state fixes

  amdgpu:
        Enable GPU scheduler by default
        New atombios opcodes
        GPUVM debugging options
        Stoney support.
        Fencing cleanups.

  radeon:
        More efficient CS checking

  nouveau:
        gk20a instance memory handling improvements.
        Improved PGOB detection and GK107 support
        Kepler GDDR5 PLL statbility improvement
        G8x/GT2xx reclock improvements
        new userspace API compatiblity fixes.

  virtio-gpu:
        Add 3D support - qemu 2.5 has it merged for it's gtk backend.

  msm:
        Initial msm88896 (snapdragon 8200)

  exynos:
        HDMI cleanups
        Enable mixer driver byt default
        Add DECON-TV support

  vmwgfx:
        Move to using memremap + fixes.

  rcar-du:
        Add support for R8A7793/4 DU

  armada:
        Remove support for non-component mode
        Improved plane handling
        Power savings while in DPMS off.

  tda998x:
        Remove unused slave encoder support
        Use more HDMI helpers
        Fix EDID read handling

  dwhdmi:
        Interlace video mode support for ipu-v3/dw_hdmi
        Hotplug state fixes
        Audio driver integration

  imx:
        More color formats support.

  tegra:
        Minor fixes/improvements"

[ Merge fixup: remove unused variable 'dev' that had all uses removed in
  commit 4e270f08: "drm/gem: Drop struct_mutex requirement from
  drm_gem_mmap_obj" ]

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (764 commits)
  drm/vmwgfx: Relax irq locking somewhat
  drm/vmwgfx: Properly flush cursor updates and page-flips
  drm/i915/skl: disable display side power well support for now
  drm/i915: Extend DSL readout fix to BDW and SKL.
  drm/i915: Do graphics device reset under forcewake
  drm/i915: Skip fence installation for objects with rotated views (v4)
  vga_switcheroo: Drop client power state VGA_SWITCHEROO_INIT
  drm/amdgpu: group together common fence implementation
  drm/amdgpu: remove AMDGPU_FENCE_OWNER_MOVE
  drm/amdgpu: remove now unused fence functions
  drm/amdgpu: fix fence fallback check
  drm/amdgpu: fix stoping the scheduler timeout
  drm/amdgpu: cleanup on error in amdgpu_cs_ioctl()
  drm/i915: Fix locking around GuC firmware load
  drm/amdgpu: update Fiji's Golden setting
  drm/amdgpu: update Fiji's rev id
  drm/amdgpu: extract common code in vi_common_early_init
  drm/amd/scheduler: don't oops on failure to load
  drm/amdgpu: don't oops on failure to load (v2)
  drm/amdgpu: don't VT switch on suspend
  ...

Merge third patch-bomb from Andrew Morton:
 "We're pretty much done over here - I'm still waiting for a nouveau
  merge so I can cleanly finish up Christoph's dma-mapping rework.

   - bunch of small misc stuff

   - fold abs64() into abs(), remove abs64()

   - new_valid_dev() cleanups

   - binfmt_elf_fdpic feature work"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (24 commits)
  fs/binfmt_elf_fdpic.c: provide NOMMU loader for regular ELF binaries
  fs/stat.c: remove unnecessary new_valid_dev() check
  fs/reiserfs/namei.c: remove unnecessary new_valid_dev() check
  fs/nilfs2/namei.c: remove unnecessary new_valid_dev() check
  fs/ncpfs/dir.c: remove unnecessary new_valid_dev() check
  fs/jfs: remove unnecessary new_valid_dev() checks
  fs/hpfs/namei.c: remove unnecessary new_valid_dev() check
  fs/f2fs/namei.c: remove unnecessary new_valid_dev() check
  fs/ext2/namei.c: remove unnecessary new_valid_dev() check
  fs/exofs/namei.c: remove unnecessary new_valid_dev() check
  fs/btrfs/inode.c: remove unnecessary new_valid_dev() check
  fs/9p: remove unnecessary new_valid_dev() checks
  include/linux/kdev_t.h: old/new_valid_dev() can return bool
  include/linux/kdev_t.h: remove unused huge_valid_dev()
  kmap_atomic_to_page() has no users, remove it
  drivers/scsi/cxgbi: fix build with EXTRA_CFLAGS
  dma: remove external references to dma_supported
  Documentation/sysctl/vm.txt: fix misleading code reference of overcommit_memory
  remove abs64()
  kernel.h: make abs() work with 64-bit types
  ...

Pull NFS client updates from Trond Myklebust:
 "Highlights include:

  New features:
   - RDMA client backchannel from Chuck
   - Support for NFSv4.2 file CLONE using the btrfs ioctl

  Bugfixes + cleanups:
   - Move socket data receive out of the bottom halves and into a
     workqueue
   - Refactor NFSv4 error handling so synchronous and asynchronous RPC
     handles errors identically.
   - Fix a panic when blocks or object layouts reads return a bad data
     length
   - Fix nfsroot so it can handle a 1024 byte long path.
   - Fix bad usage of page offset in bl_read_pagelist
   - Various NFSv4 callback cleanups+fixes
   - Fix GETATTR bitmap verification
   - Support hexadecimal number for sunrpc debug sysctl files"

* tag 'nfs-for-4.4-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (53 commits)
  Sunrpc: Supports hexadecimal number for sysctl files of sunrpc debug
  nfs: Fix GETATTR bitmap verification
  nfs: Remove unused xdr page offsets in getacl/setacl arguments
  fs/nfs: remove unnecessary new_valid_dev check
  SUNRPC: fix variable type
  NFS: Enable client side NFSv4.1 backchannel to use other transports
  pNFS/flexfiles: Add support for FF_FLAGS_NO_IO_THRU_MDS
  pNFS/flexfiles: When mirrored, retry failed reads by switching mirrors
  SUNRPC: Remove the TCP-only restriction in bc_svc_process()
  svcrdma: Add backward direction service for RPC/RDMA transport
  xprtrdma: Handle incoming backward direction RPC calls
  xprtrdma: Add support for sending backward direction RPC replies
  xprtrdma: Pre-allocate Work Requests for backchannel
  xprtrdma: Pre-allocate backward rpc_rqst and send/receive buffers
  SUNRPC: Abstract backchannel operations
  xprtrdma: Saving IRQs no longer needed for rb_lock
  xprtrdma: Remove reply tasklet
  xprtrdma: Use workqueue to process RPC/RDMA replies
  xprtrdma: Replace send and receive arrays
  xprtrdma: Refactor reply handler error handling
  ...

Pull gfs2 updates from Bob Peterson:
 "Here is a list of patches we've accumulated for GFS2 for the current
  upstream merge window.  There are only six patches this time:

   1. A cleanup patch from Andreas to remove the gl_spin #define in favor
      of its value for the sake of clarity.
   2. A fix from Andy Price to mark the inode dirty during fallocate.
   3. A fix from Andy Price to set s_mode on mount failures to prevent a
      stack trace.
   4  A patch from me to prevent a kernel BUG() in trans_add_meta/trans_add_data
      due to uninitialized storage.
   5. A patch from me to protecting our freeing of the in-core directory
      hash table to prevent double-free.
   6. A fix for a page/block rounding problem that resulted in a metadata
      coherency problem when the block size != page size"

  I've got a lot more patches in various stages of review and testing,
  but I'm afraid they'll have to wait until the next merge window.  So
  next time we're likely to have a lot more"

* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  GFS2: Fix rgrp end rounding problem for bsize < page size
  GFS2: Protect freeing directory hash table with i_lock spin_lock
  gfs2: Remove gl_spin define
  gfs2: Add missing else in trans_add_meta/data
  GFS2: Set s_mode before parsing mount options
  GFS2: fallocate: do not rely on file_update_time to mark the inode dirty

Pull ext2 fix from Jan Kara:
 "Fix for DAX on ext2"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  ext2: Add locking for DAX faults

Pull parisc updates from Helge Deller:
 "We have two patches in here:

   - The parisc uapi headers have been screwed up since quite some time.
     This patch fixes some bugs (e.g. endianess not respected in
     compat_semid64_ds) and cleans them up (e.g. uid_t was used instead
     of __kernel_uid_t) so that they can be used by userspace again.
     This patch has been reviewed by Arnd Bergmann and is scheduled for
     stable kernel series.

   - Drop the hpux_stat64 struct from stat.h, we do not support HP-UX
     binaries since kernel 4.0"

* 'parisc-4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Fixes and cleanups in kernel uapi header files
  parisc: Drop hpux_stat64 struct from stat.h header file

Pull nios2 updates from Ley Foon Tan:

 - nios2: Remove unnecessary #ifdef guards
 - nios2: Switch to generic __xchg()
 - nios2: Fix unused variable warning

* tag 'nios2-v4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
  nios2: Remove unnecessary #ifdef guards
  nios2: Switch to generic __xchg()
  nios2: Fix unused variable warning

Merging in the few patches I had kept separate from main next/dt, since others
got merged here directly.

* next/arm64:
  arm64: defconfig: Enable PCI generic host bridge by default
  arm64: Juno: Add support for the PCIe host bridge on Juno R1
  Documentation: of: Document the bindings used by Juno R1 PCIe host bridge
  arm64: dts: mt8173: Add clocks for SCPSYS unit
  arm64: dts: mt8173: Add subsystem clock controller device nodes
  + Linux 4.3-rc5

Pull xtensa updates from Chris Zankel:

 - fix remaining issues with noMMU cores
 - fix build for cores w/o cache or zero overhead loop options
 - fix boot of secondary cores in SMP configuration
 - add support for DMA to high memory pages
 - add dma_to_phys and phys_to_dma functions.

* tag 'xtensa-20151108' of git://github.com/czankel/xtensa-linux:
  xtensa: implement dma_to_phys and phys_to_dma
  xtensa: support DMA to high memory
  Revert "xtensa: cache inquiry and unaligned cache handling functions"
  xtensa: drop unused sections and remapped reset handlers
  xtensa: fix secondary core boot in SMP
  xtensa: add FORCE_MAX_ZONEORDER to Kconfig
  xtensa: nommu: provide defconfig for de212 on kc705
  xtensa: nommu: xtfpga: add kc705 DTS
  xtensa: add de212 core variant
  xtensa: nommu: select HAVE_FUTEX_CMPXCHG
  xtensa: nommu: fix default memory start address
  xtensa: nommu: provide correct KIO addresses
  xtensa: nommu: fix USER_RING definition
  xtensa: xtfpga: fix integer overflow in TASK_SIZE
  xtensa: fix build for configs without cache options
  xtensa: fixes for configs without loop option

Pull m68knommu/coldfire fix from Greg Ungerer:
 "Only a single patch, fixes brk area setup problem in nommu
  environments"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  fs/binfmt_elf_fdpic.c: fix brk area overlap with stack on NOMMU

Pull module updates from Rusty Russell:
 "Nothing exciting, minor tweaks and cleanups"

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  scripts: [modpost] add new sections to white list
  modpost: Add flag -E for making section mismatches fatal
  params: don't ignore the rest of cmdline if parse_one() fails
  modpost: abort if a module symbol is too long

The ELF binary loader in binfmt_elf.c requires an MMU, making it
impossible to use regular ELF binaries on NOMMU archs.  However, the FDPIC
ELF loader in binfmt_elf_fdpic.c is fully capable as a loader for plain
ELF, which requires constant displacements between LOAD segments, since it
already supports FDPIC ELF files flagged as needing constant displacement.

This patch adjusts the FDPIC ELF loader to accept non-FDPIC ELF files on
NOMMU archs.  They are treated identically to FDPIC ELF files with the
constant-displacement flag bit set, except for personality, which must
match the ABI of the program being loaded; the PER_LINUX_FDPIC personality
controls how the kernel interprets function pointers passed to sigaction.

Files that do not set a stack size requirement explicitly are given a
default stack size (matching the amount of committed stack the normal ELF
loader for MMU archs would give them) rather than being rejected; this is
necessary because plain ELF files generally do not declare stack
requirements in theit program headers.

Only ET_DYN (PIE) format ELF files are supported, since loading at a fixed
virtual address is not possible on NOMMU.

This patch was developed and tested on J2 (SH2-compatible) but should
be usable immediately on all archs where binfmt_elf_fdpic is
available. Moreover, by providing dummy definitions of the
elf_check_fdpic() and elf_check_const_displacement() macros for archs
which lack an FDPIC ABI, it should be possible to enable building of
binfmt_elf_fdpic on all other NOMMU archs and thereby give them ELF
binary support, but I have not yet tested this.

The motivation for using binfmt_elf_fdpic.c rather than adapting
binfmt_elf.c to NOMMU is that the former already has all the necessary
code to work properly on NOMMU and has already received widespread
real-world use and testing. I hope this is not controversial.

I'm not really happy with having to unset the FDPIC_FUNCPTRS
personality bit when loading non-FDPIC ELF. This bit should really
reset automatically on execve, since otherwise, executing non-ELF
binaries (e.g. bFLT) from an FDPIC process will leave the personality
in the wrong state and severely break signal handling. But that's a
separate, existing bug and I don't know the right place to fix it.
Signed-off-by: Rich Felker <dalias@libc.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: Oleg Endo <oleg.endo@t-online.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

new_valid_dev() always returns 1, so the !new_valid_dev() check is not
needed.  Remove it.
Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

new_valid_dev() always returns 1, so the !new_valid_dev() check is not
needed.  Remove it.
Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

new_valid_dev() always returns 1, so the !new_valid_dev() check is not
needed.  Remove it.
Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

new_valid_dev() always returns 1, so the !new_valid_dev() check is not
needed.  Remove it.
Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Petr Vandrovec <petr@vandrovec.name>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

new_valid_dev() always returns 1, so the !new_valid_dev() checks are not
needed.  Remove them.
Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

new_valid_dev() always returns 1, so the !new_valid_dev() check is not
needed.  Remove it.
Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

new_valid_dev() always returns 1, so the !new_valid_dev() check is not
needed.  Remove it.
Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Changman Lee <cm224.lee@samsung.com>
Cc: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

new_valid_dev() always returns 1, so the !new_valid_dev() check is not
needed.  Remove it.
Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jan Kara <jack@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

new_valid_dev() always returns 1, so the !new_valid_dev() check is not
needed.  Remove it.
Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Acked-by: Boaz Harrosh <ooo@electrozaur.com>
Cc: Benny Halevy <bhalevy@primarydata.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

new_valid_dev() always returns 1, so the !new_valid_dev() check is not
needed.  Remove it.
Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Acked-by: David Sterba <dsterba@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

new_valid_dev() always returns 1, so the !new_valid_dev() check is not
needed.  Remove it.
Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Make old/new_valid_dev return bool due to these two particular functions
only using either one or zero as their return value.

No functional change.
Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There's no user of huge_valid_dev() any more, so remove it.

No functional change.
Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>