Turns out it's not quite ready to be included, thanks to some other work
done in the zcache and zram code, which breaks this driver.

So, delete it for now, per the recommendation of Dan.
Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replaces xvmalloc with zsmalloc as the persistent memory allocator
for zcache
Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In a multithreaded workload, the zv_curr_dist_counts
and zv_cumul_dist_counts statistics are being corrupted
because the increments and decrements in zv_create
and zv_free are not atomic.

This patch converts these statistics and their corresponding
increments/decrements/reads to atomic operations.
Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Neither of these drivers has ever been anywhere near the iio abi.
Probably as a result of this the fact they had two event groups
each was not picked up when we restricted IIO to having only
1 event line per device (as part of the chrdev merge set).

As such these definitely didn't work before.  This patch squishes
the only element from the 'comparator' event line that isn't in the
'interrupt' one into it and kills off the 'comparator' one.

Ultimately both of these drivers belong in hwmon not IIO and are just
waiting here because I don't want to kill off a driver that may
prove useful to someone.  (Ultimately I will ask Greg to scrap
these two if no one steps up to deal with them.)
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is the most controversial of this set of is_visible removals.
There are two conditions controlling availability of attrs resulting
in 4 different attribute groups.

Still for a few more lines things are clearer to read to my mind.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Trivial case where no attributes are valid for some parts. Better
handled using two iio_info structures and selecting the right one
at probe time.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Trivial usecase in which just having two different attr
groups covers all options.  Slightly more code, but a simpler
to follow result.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It saves a couple of lines of code but reduces simplicity of code.
I generally wish to discourage use of is_visible throughout IIO.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We always hold the waitqueue lock when modifying the flags field. So it is safe
to use the non-atomic bitops here instead of the atomic versions.

The lock has to be held, because we need to clear the busy flag and flush the
event FIFO in one atomic operation when closing the event file descriptor.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add poll support to the event queue. This will allow us to check for pending
events in a application's event loop using poll() or similar. Since we already
have support for blocking reads adding poll support as well is trivial.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the waitqueue lock to protect the event queue instead of a custom mutex.
This has the advantage that we can call the waitqueue operations with the lock
held, which simplifies the code flow a bit.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The current IIO event code uses a list to emulate FIFO like behavior.
Just use a kfifo directly instead to implement the event queue. As part of this
patch the maximum of events in the queue is increased from 10 to 16 since kfifo
requires a power of two for the number of FIFO elements.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The core iio file has gotten quite cluttered over time. This patch moves
the event handling code into its own file. Since the event handling code is
largely independent from the core code the only code changes necessary for
this are to make the moved iio_device_register_eventset,
iio_device_unregister_eventset and iio_event_getfd functions non static.

This has also the advantage that industrialio-core.c is now closer again to
its counterpart in the outofstaging branch.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The documentation for the iio_event_interface does not match the actual struct
anymore. This patch removes the documentation for non-existing fields and adds
documentation for missing fields.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Setup the buffer access functions in the buffer allocate function. There is no
need to let each driver handle this on its own.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Just like isl29018; trivial addition. Using both asahi-kasei,ak8975 and
the non-prefixed version (I couldn't figure out if Asahi Kasei had a
stock symbol to use, I only found numerical indexes for their stock info).
Signed-off-by: Olof Johansson <olof@lixom.net>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As simple as can be right now; just one ID and no custom properties to parse.
Signed-off-by: Olof Johansson <olof@lixom.net>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These are bitfields and the intend was to OR them together.  A logical
OR here is simply 1.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch is ported over by me (Ian Abbott) from the out-of-tree Comedi
git repository at "git://comedi.org/git/comedi/comedi.git".

The original patch is by Nicholas Nell.

The patch adds support for trailing (falling) edge external triggers for
scans in asynchronous command support in the ni_pcidio driver.  This is
supported at least on the PCI-DIO_32HS and PCI-6533 boards; not sure
about the other boards.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Nicholas Nell <nicholas.nell@colorado.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch is ported over by me (Ian Abbott) from the out-of-tree Comedi
git repository at "git://comedi.org/git/comedi/comedi.git".

The original patch is by Nicholas Nell.

The patch adds support for the COMEDI_POLL ioctl to the ni_pcidio
driver.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Nicholas Nell <nicholas.nell@colorado.edu>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When setting up the DMA for 'read' streaming acquisition command, grab
the MITE channel spinlock before preparing and arming the DMA.

Change inspired by ni_ai_setup_MITE_dma() in ni_mio_common.c.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When setting up the DMA for 'read' streaming acquisition on the DIO
subdevice, mark the whole buffer as writable before starting the DMA.
This prevents a spurious detection of a DMA overwrite of good data
during the first interrupt.

Problem reported by Nicholas Nell.  Fix suggested by Frank Mori Hess.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch is ported over by me (Ian Abbott) from the out-of-tree Comedi
git repository at "git://comedi.org/git/comedi/comedi.git".

The original patch is by Nicholas Nell.

-----
Advantech PCI-1739U support

Hello,

I've added a bit of simple configuration to adv_pci_dio.c in order to
make the PCI-1739U work with the adv_pci_dio driver. I have tested
inputs only so far but they seem to work. A git style patch is
attached.

Thanks,

--
Nicholas Nell
Professional Research Assistant
University of Colorado
-----
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Nico Nell <nicholas.nell@colorado.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The INSN_CONFIG handler for the DIO subdevice should error out for
unsupported configuration instruction codes.

Also fix incorrect use of constant COMEDI_OUTPUT where
INSN_CONFIG_DIO_OUTPUT was meant.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Handle INSN_CONFIG_DIO_INPUT, INSN_CONFIG_DIO_OUTPUT and
INSN_CONFIG_DIO_QUERY in data[0].
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Paul Fulmek reports that PXIe-6251 works the same as the existing
PCIe-6251 and just needs the new PCI device ID adding to ni_pci_table[]
and a new entry adding to ni_boards[] based on the existing entry for
PCIe-6251.

The new entry has PCI device ID 0x72e8 and board name "pxie-6251".

Thanks Paul!
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We're getting the ssid length from the scan here.  Let's cap it before
doing the memcpy().
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If allocating 'pdata_urb' fails, the function will return -ENOMEM
without freeing the memory allocated, just a few lines above, for
'purb' and will leak that memory when 'purb' goes out of scope.

This patch resolves the leak by freeing the allocated storage with
usb_free_urb() before the return.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Correct spelling "suppported" to "supported" in
drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c

Signed-off-by: Masanari iida<standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bitwise OR was clearly intended here.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

this example tries to connect to amt host interface client and retrieve
versions of its sub components

When AMT is enabled an output might look like that:
Intel AMT: ENABLED
Flash:	6.1.0
Netstack:	6.1.0
AMTApps:	6.1.0
AMT:	6.1.0
Sku:	258
VendorID:	8086
Build Number:	1042
Recovery Version:	6.1.0
Recovery Build Num:	1042
Legacy Mode:	False

otherwise:
Intel AMT: DISABLED
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1. convert all read buffers to unsigned char and drop useless castings
2. simplify mei_read_slots implementation
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1. Update Copyright to 2012
2. Also fix mei.h copyright format
   checkpaatch complained:
   WARNING: please, no spaces at the start of a line
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is a patch to the ft1000_proc.c that fixes up space required after
',' errors found by the checkpatch.pl tool
Signed-off-by: Kashyap Gada <gada.kashyap@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Bart Westgeest <bart@elbrys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The function usbip_pad_iso never returns anything but 0 (success).
Signed-off-by: Bart Westgeest <bart@elbrys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Bart Westgeest <bart@elbrys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The semantic patch that makes this change is available
in scripts/coccinelle/api/err_cast.cocci.

More information about semantic patching is available at
http://coccinelle.lip6.fr/Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This will remove the following checkpatch.pl error:
ERROR: "foo * bar" should be "foo *bar"
Signed-off-by: Márton Németh <nm127@freemail.hu>
Acked-by: edwin_rong <edwin_rong@realsil.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>