- 15 Jan, 2014 2 commits
-
-
Paul Gortmaker authored
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. The one instance where we add an include for init.h covers off a case where that file was implicitly getting it from another header which itself didn't need it. Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Andreas Schwab authored
GCC 4.8 now generates out-of-line vr save/restore functions when optimizing for size. They are needed for the raid6 altivec support. Signed-off-by:
Andreas Schwab <schwab@linux-m68k.org> Signed-off-by:
-
- 30 Dec, 2013 15 commits
-
-
Benjamin Herrenschmidt authored
Merge a pile of fixes that went into the "merge" branch (3.13-rc's) such as Anton Little Endian fixes. Signed-off-by: -
Anton Blanchard authored
The SLB save area is shared with the hypervisor and is defined as big endian, so we need to byte swap on little endian builds. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Benjamin Herrenschmidt authored
Anatolij writes: Please pull two DTS fixes for MPC5125 tower board. Without them the v3.13-rcX kernels do not boot.
-
Alistair Popple authored
This patch updates the generic iommu backend code to use the it_page_shift field to determine the iommu page size instead of using hardcoded values. Signed-off-by:
Alistair Popple <alistair@popple.id.au> Signed-off-by:
-
Alistair Popple authored
This patch adds a it_page_shift field to struct iommu_table and initiliases it to 4K for all platforms. Signed-off-by:
-
Alistair Popple authored
The powerpc iommu uses a hardcoded page size of 4K. This patch changes the name of the IOMMU_PAGE_* macros to reflect the hardcoded values. A future patch will use the existing names to support dynamic page sizes. Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
-
Michael Opdenacker authored
This removes the REDBOOT Kconfig parameter, which was no longer used anywhere in the source code and Makefiles. Signed-off-by:
Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by:
-
Mahesh Salgaonkar authored
With recent machine check patch series changes, The exception vectors starting from 0x4300 are now overflowing with allyesconfig. Fix that by moving machine_check_common and machine_check_handle_early code out of that region to make enough room for exception vector area. Fixes this build error reportes by Stephen: arch/powerpc/kernel/exceptions-64s.S: Assembler messages: arch/powerpc/kernel/exceptions-64s.S:958: Error: attempt to move .org backwards arch/powerpc/kernel/exceptions-64s.S:959: Error: attempt to move .org backwards arch/powerpc/kernel/exceptions-64s.S:983: Error: attempt to move .org backwards arch/powerpc/kernel/exceptions-64s.S:984: Error: attempt to move .org backwards arch/powerpc/kernel/exceptions-64s.S:1003: Error: attempt to move .org backwards arch/powerpc/kernel/exceptions-64s.S:1013: Error: attempt to move .org backwards arch/powerpc/kernel/exceptions-64s.S:1014: Error: attempt to move .org backwards arch/powerpc/kernel/exceptions-64s.S:1015: Error: attempt to move .org backwards arch/powerpc/kernel/exceptions-64s.S:1016: Error: attempt to move .org backwards arch/powerpc/kernel/exceptions-64s.S:1017: Error: attempt to move .org backwards arch/powerpc/kernel/exceptions-64s.S:1018: Error: attempt to move .org backwards [Moved the code further down as it introduced link errors due to too long relative branches to the masked interrupts handlers from the exception prologs. Also removed the useless feature section --BenH ] Signed-off-by:
Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Tested-by:
-
Olof Johansson authored
Commit 5c0484e2 ('powerpc: Endian safe trampoline') resulted in losing proper alignment of the spinlock variables used when booting secondary CPUs, causing some quite odd issues with failing to boot on PA Semi-based systems. This showed itself on ppc64_defconfig, but not on pasemi_defconfig, so it had gone unnoticed when I initially tested the LE patch set. Fix is to add explicit alignment instead of relying on good luck. :) [ It appears that there is a different issue with PA Semi systems however this fix is definitely correct so applying anyway -- BenH ] Fixes: 5c0484e2 ('powerpc: Endian safe trampoline') Reported-by:
Christian Zigotzky <chzigotzky@xenosoft.de> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=67811Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Anton Blanchard authored
p_end is an 8 byte value embedded in the text section. This means it is only 4 byte aligned when it should be 8 byte aligned. Fix this by adding an explicit alignment. This fixes an issue where POWER7 little endian builds with CONFIG_RELOCATABLE=y fail to boot. Signed-off-by:
-
Brian W Hart authored
Prevent ioda_eeh_hub_diag() from clobbering itself when called by supplying a per-PHB buffer for P7IOC hub diagnostic data. Take care to inform OPAL of the correct size for the buffer. [Small style change to the use of sizeof -- BenH] Signed-off-by:
Brian W Hart <hartb@linux.vnet.ibm.com> Acked-by:
Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by:
-
Brian W Hart authored
PHB diagnostic buffer may be smaller than PAGE_SIZE, especially when PAGE_SIZE > 4KB. Signed-off-by:
-
Paul E. McKenney authored
The powerpc 64-bit __copy_tofrom_user() function uses shifts to handle unaligned invocations. However, these shifts were designed for big-endian systems: On little-endian systems, they must shift in the opposite direction. This commit relies on the C preprocessor to insert the correct shifts into the assembly code. [ This is a rare but nasty LE issue. Most of the time we use the POWER7 optimised __copy_tofrom_user_power7 loop, but when it hits an exception we fall back to the base __copy_tofrom_user loop. - Anton ] Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
Rajesh B Prathipati authored
The generic put_unaligned/get_unaligned macros were made endian-safe by calling the appropriate endian dependent macros based on the endian type of the powerpc processor. Signed-off-by:
Rajesh B Prathipati <rprathip@linux.vnet.ibm.com> Signed-off-by:
-
Michael Neuling authored
In EXCEPTION_PROLOG_COMMON() we check to see if the stack pointer (r1) is valid when coming from the kernel. If it's not valid, we die but with a nice oops message. Currently we allocate a stack frame (subtract INT_FRAME_SIZE) before we check to see if the stack pointer is negative. Unfortunately, this won't detect a bad stack where r1 is less than INT_FRAME_SIZE. This patch fixes the check to compare the modified r1 with -INT_FRAME_SIZE. With this, bad kernel stack pointers (including NULL pointers) are correctly detected again. Kudos to Paulus for finding this. Signed-off-by:
Michael Neuling <mikey@neuling.org> cc: stable@vger.kernel.org Signed-off-by:
-
- 20 Dec, 2013 1 commit
-
-
Matteo Facchinetti authored
At the moment the USB controller's pin muxing is not setup correctly and causes a kernel panic upon system startup, so disable the USB1 device tree node in the MPC5125 tower board dts file. The USB controller is connected to an USB3320 ULPI transceiver and the device tree should receive an update to reflect correct dependencies and required initialization data before the USB1 node can get re-enabled. Signed-off-by:
Matteo Facchinetti <matteo.facchinetti@sirius-es.it> Signed-off-by:
Anatolij Gustschin <agust@denx.de>
-
- 18 Dec, 2013 1 commit
-
-
Gerhard Sittig authored
the 'soc' node in the MPC5125 "tower" board .dts has an '#interrupt-cells' property although this node is not an interrupt controller remove this erroneously placed property because starting with v3.13-rc1 lookup and resolution of 'interrupts' specs for peripherals gets misled (tries to use the 'soc' as the interrupt parent which fails), emits 'no irq domain found' WARN() messages and breaks the boot process [ best viewed with 'git diff -U5' to have DT node names in the context ] Cc: Anatolij Gustschin <agust@denx.de> Cc: linuxppc-dev@lists.ozlabs.org Cc: devicetree@vger.kernel.org Signed-off-by:
Gerhard Sittig <gsi@denx.de> Signed-off-by:
-
- 13 Dec, 2013 10 commits
-
-
Benjamin Herrenschmidt authored
We are passing pointers to the firmware for reads, we need to properly convert the result as OPAL is always BE. Signed-off-by: -
Anton Blanchard authored
opal_xscom_read uses a pointer to return the data so we need to byteswap it on LE builds. Signed-off-by:
-
Anton Blanchard authored
A couple more device tree properties that need byte swapping. Signed-off-by:
-
Anton Blanchard authored
The MSI code is miscalculating quotas in little endian mode. Add required byteswaps to fix this. Before we claimed a quota of 65536, after the patch we see the correct value of 256. Signed-off-by:
-
Anton Blanchard authored
We need to byteswap ibm,pcie-link-speed-stats. Signed-off-by:
-
Anton Blanchard authored
The NVRAM code has a number of endian issues. I noticed a very confused error log count: RTAS: 100663330 -------- RTAS event begin -------- 100663330 == 0x06000022. 0x6 LE error logs and 0x22 BE error logs. The pstore code has similar issues - if we write an oops in one endian and attempt to read it in another we get junk. Make both of these formats big endian, and byteswap as required. Signed-off-by:
-
Anton Blanchard authored
Some obvious issues: cat /proc/ppc64/lparcfg ... partition_id=16777216 ... partition_potential_processors=268435456 Signed-off-by:
-
Anton Blanchard authored
cpu_to_core_id() is missing a byteswap: cat /sys/devices/system/cpu/cpu63/topology/core_id 201326592 Signed-off-by:
-
Anton Blanchard authored
During on LE boot we see: Partition configured for 1073741824 cpus, operating system maximum is 2048. Clearly missing a byteswap here. Signed-off-by: -
Ulrich Weigand authored
There is a bug in using ptrace to access FPRs via PTRACE_PEEKUSR / PTRACE_POKEUSR. In effect, trying to access any of the FPRs always really accesses FPR0, which does seriously break debugging :-) The problem seems to have been introduced by commit 3ad26e5c (Merge branch 'for-kvm' into next). [ It is indeed a merge conflict between Paul's FPU/VSX state rework and my LE patches - Anton ] Signed-off-by:
Ulrich Weigand <Ulrich.Weigand@de.ibm.com> Signed-off-by:
-
- 10 Dec, 2013 10 commits
-
-
Mahesh Salgaonkar authored
The current logic sets the kdump base to min of 2G or ppc64_rma_size/2. On PowerNV kernel the first memory block 'memory@0' can be very large, equal to the DIMM size with ppc64_rma_size value capped to 1G. Hence on PowerNV, kdump base is set to 512M resulting kdump to fail while allocating paca array. This is because, paca need its memory from RMA region capped at 256M (see allocate_pacas()). This patch lowers the kdump base cap to 128M so that kdump kernel can successfully get memory below 256M for paca allocation. Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
I have recently found out that no iommu_groups could be found under /sys/ on a P8. That prevents PCI passthrough from working. During my investigation, I found out there seems to be a missing iommu_register_group for PHB3. The following patch seems to fix the problem. After applying it, I see iommu_groups under /sys/kernel/iommu_groups/, and can also bind vfio-pci to an adapter, which gives me a device at /dev/vfio/. Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by:
-
Anatolij Gustschin authored
The bestcomm driver has been moved to drivers/dma, so to select this driver by default additionally CONFIG_DMADEVICES has to be enabled. Currently it is not enabled in the config despite existing CONFIG_PPC_BESTCOMM=y in the config files. Fix it. Signed-off-by:
-
Olof Johansson authored
At least some distros expect it these days; turn it on. Also, random churn from doing a savedefconfig for the first time in a year or so. Signed-off-by:
-
Cedric Le Goater authored
The pseudo palette color entries need to be ajusted for little endian. This patch byteswaps the values in the pseudo palette depending on the host endian order and the screen depth. Signed-off-by:
Cédric Le Goater <clg@fr.ibm.com> Signed-off-by:
-
Cedric Le Goater authored
The "screen" properties : depth, width, height, linebytes need to be converted to the host endian order when read from the device tree. The offb_init_palette_hacks() routine also made assumption on the host endian order. Signed-off-by:
-
Hong H. Pham authored
In pte_alloc_one(), pgtable_page_ctor() is passed an address that has not been converted by page_address() to the newly allocated PTE page. When the PTE is freed, __pte_free_tlb() calls pgtable_page_dtor() with an address to the PTE page that has been converted by page_address(). The mismatch in the PTE's page address causes pgtable_page_dtor() to access invalid memory, so resources for that PTE (such as the page lock) is not properly cleaned up. On PPC32, only SMP kernels are affected. On PPC64, only SMP kernels with 4K page size are affected. This bug was introduced by commit d614bb04 "powerpc: Move the pte free routines from common header". On a preempt-rt kernel, a spinlock is dynamically allocated for each PTE in pgtable_page_ctor(). When the PTE is freed, calling pgtable_page_dtor() with a mismatched page address causes a memory leak, as the pointer to the PTE's spinlock is bogus. On mainline, there isn't any immediately obvious symptoms, but the problem still exists here. Fixes: d614bb04 "powerpc: Move the pte free routes from common header" Cc: Paul Mackerras <paulus@samba.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: linux-stable <stable@vger.kernel.org> # v3.10+ Signed-off-by:
Hong H. Pham <hong.pham@windriver.com> Reviewed-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
-
Ilia Mirkin authored
Allocate enough memory for the ocm_block structure, not just a pointer to it. Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
-
Michael Ellerman authored
A kernel configured with PPC_EARLY_DEBUG_BOOTX=y but PPC_PMAC=n and PPC_MAPLE=n will fail to link: btext.c:(.text+0x2d0fc): undefined reference to `.rmci_off' btext.c:(.text+0x2d214): undefined reference to `.rmci_on' Fix it by making the build of rmci_on/off() depend on PPC_EARLY_DEBUG_BOOTX, which also enable the only code that uses them. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Benjamin Herrenschmidt authored
Anatolij Gustschin says: << Please pull a device tree fix for v3.13. The booting on mpc512x is broken since v3.13-rc1, this patch repairs it. >>
-
- 09 Dec, 2013 1 commit
-
-
Mahesh Salgaonkar authored
Get the memory errors reported by opal and plumb it into memory poison infrastructure. This patch uses new messaging channel infrastructure to pull the fsp memory errors to linux. Signed-off-by:
-
