An error occurred fetching the project authors.
- 18 Feb, 2019 6 commits
-
-
Felix Fietkau authored
Avoid triggering too early Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Felix Fietkau authored
ED/CCA Tx blocking checks need to be run every 100 ms in order to avoid triggering too late and keeping tx blocking on for too long Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Felix Fietkau authored
Avoid reusing the previous channel's tx blocking state Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Felix Fietkau authored
Software encrypted packets can be passed not just through the drv_tx callback, but also through the intermediate tx queue. In order to deal with that, move the override to mt76x02_mac_write_txwi and also take care of filling in the per-packet rate information Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Stanislaw Gruszka authored
Configure beaconing on USB devices without PS buffering support. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Stanislaw Gruszka authored
BSSID is not strtirct related with beaconing (for example we can have 2 STA vifs) and more related with MAC address, so initaize BSSID when setting MAC address. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
- 22 Jan, 2019 1 commit
-
-
Felix Fietkau authored
Fix an off-by-one error that resulted in not reporting the signal strength for the first chain Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
- 21 Jan, 2019 1 commit
-
-
Lorenzo Bianconi authored
Take into account device rx stream in mt76x02_mac_process_rate in order to not report wrong number of rx spatial stream to mac80211. The issue has been reported on mt76x0 device which is 1x1:1 however the hw sometimes reports rx nss equal to 2 Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
- 17 Jan, 2019 2 commits
-
-
Felix Fietkau authored
This will be used by mt7603 as well Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Felix Fietkau authored
On MT76x2, the hardware does not report tx status in the FIFO register, if the packet id is 0. Change the allocation of packet IDs to use 0 for no-ack packets, 1 for non-probing packets and 2-255 for packets with tx status requested. Fixes rate control issues Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
- 11 Jan, 2019 7 commits
-
-
Lorenzo Bianconi authored
Port mt76x02_check_tx_hang watchdog from vendor driver in order to perform a device reset when tx mac/dma logic hangs. Tx mac/dma stuck has been observed when the device is heavy loaded or in a noisy environment. Moreover introduce wdt delayed work in order to run tx_hang watchdog. For the moment run mt76x02_check_tx_hang watchdog just on mt76x2 devices since the issue has not been observed on mt76x0 driver yet Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Do not set bw variable to zero for legacy rates since it is already initialized to zero. Moreover set nss to 1 just for legacy rates since nss will be properly set for VHT/HT rates Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Ported from the reference driver. Should fix compliance with ETSI regulatories on preventing transmission while energy detect values are above the threshold. The code has been tested using an ath9k device running tx99 as noise generator Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Stanislaw Gruszka authored
Configure protection based on information that are provided to us either by remote AP or by hostapd via HT operation IE. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Stanislaw Gruszka authored
Use set_rts_threshold calback to enable/disable threshold only for legacy traffic. Protection for HT and VHT traffic is defined by HT operation element and it's provided by remote AP or by hostapd. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Grab mt76_dev mutex in mt76x02_mac_work handler since it runs concurrently with mt76x{0,2}_set_channel routines Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Reconfigure properly MT_MAC_SYS_CTRL register after mac sw-reset in mt76x02_check_mac_err routine Fixes: 73556561 ("mt76x0: use mt76x02_mac_work as stats handler") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
- 30 Nov, 2018 14 commits
-
-
Felix Fietkau authored
Open-coding it simplifies the code Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Felix Fietkau authored
There is some code in the mac80211 tx status processing code that could potentially call back into the tx codepath. To avoid deadlocks, make sure that no tx related spinlocks are taken during the ieee80211_tx_status call. Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Move WCID tx rate configuration at device bootstrap since the related register are always set to 0 Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Felix Fietkau authored
MT76x2/MT76x0 has somewhat unreliable tx status reporting, and for that reason the driver currently does not report per-skb tx ack status at all. This breaks things like client idle polling, which relies on the tx ack status of a transmitted nullfunc frame. This patch adds code to report skb-attached tx status if requested by mac80211 or the rate control module. Since tx status is polled from a simple FIFO register, the code needs to account for the possibility of tx status events getting lost. The code keeps a list of skbs for which tx status is required and passes them to mac80211 once tx status has been filled in and the DMA queue is done with it. If a tx status event is not received after one second, the status rates are cleared, and a succesful ACK is indicated to avoid spurious disassoc during assoc or client polling. Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Felix Fietkau authored
Fixes a crash that could occur if a frame is sent to a station, but the station's wcid was not used (e.g. for software encrypted mgmt tx) Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Felix Fietkau authored
Make functions static where possible Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Move mt76x02_set_rts_threshold and mt76x02_mac_set_tx_protection routines in mt76x02-lib module and remove duplicated code in mt76x0 and mt76x2 drivers. Remove pci_mac.c and mt76x0/mac.c since now are empty files Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Move mt76x02_beacon mac routines in mt76x02_mac.c in order to be reused by mt76x0 driver adding AP support Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Move mt76x02_mac_set_short_preamble routine in mt76x02-lib module since it is shared between mt76x0 and mt76x2 drivers Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Add submit_urb and rx_urb static tracepoints in mt76-usb module. Move trace_mac_txstat_fetch in mt76x02_mac_load_tx_status routine in order to be available to usb drivers. Moreover remove no longer used mt76x0/trace.{c,h} Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Felix Fietkau authored
Make previously exported functions static where possible Acked-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Use mt76x02_mac_work utility routine as stats workqueue handler and remove duplicated code. Moreover run mac stuck check in mt76x02_mac_work for client interfaces. Remove no longer used avg_ampdu_len and mt76x02_mac_stats data structure in mt76x02_dev Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Move mt76x02_mac_work routine in mt76x02_mac.c in order to be reused by mt76x0 driver to read device statistics Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Move mt76x02_update_channel routine in mt76x02-lib module in order to be reused by mt76x0 driver adding get_survey support Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
- 13 Oct, 2018 3 commits
-
-
Lorenzo Bianconi authored
Disable ldpc coding for mt76x0 devices. Morover remove mt76x02_mac_fill_txwi routine since it is used just in mt76x02_mac_write_txwi Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Use mt76x02_dev data structure as reference in mt76x02_txrx.c instead of mt76_dev Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Use mt76x02_dev data structure as reference in mt76x02_mac.c instead of mt76_dev Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
- 05 Oct, 2018 6 commits
-
-
Lorenzo Bianconi authored
Move mt76x02_tx_complete mt76x02-lib module in order to be reused by mt76x0 drivers for irq unification. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Move mt76x02_mac_poll_tx_status in mt76x02_mac.c in order to be reused by mt76x0 drivers for irq unification. Moreover introduce mt76x02_trace source file to define mt76x02 trace points Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Move mt76x02_tx_get_txpwr_adj and mt76x02_tx_set_txpwr_auto routines in mt76x02-lib module since they are shared between mt76x0 and mt76x2 drivers. Moreover remove get_txpwr_adj function pointer Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Rename mt76x02_util.h header file in mt76x02.h since now contains all mt76x02 related definitions and not just utility routines declarations Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Unify rxwi parsing between mt76x2 and mt76x0. Remove the following routines: - mt76x0_phy_get_rssi - mt76x0_queue_rx_skb - mt76x0_mac_process_rx Moreover remove mt76x2/common.c and mt76x0/mac.h since are empty files Enable CCMP PN sw validation Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Move mt76x02_mac_process_rx utility routine in mt76x02-lib in order to by reused by mt76x0 driver for rxwi parsing. Add stream number check in mt76x02_mac_process_rx since mt76x0 chipsets are 1x1:1 Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-