- 08 Jun, 2013 4 commits
-
-
Sergei Shtylyov authored
Get the SH7619 data in the driver out of #ifdef by adding "sh7619-ether" to the platform driver's ID table. Change the Ether platform device's name in the SH platform code accordingly. Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sergei Shtylyov authored
Get the SH771[02] data in the driver out of #ifdef by adding "sh771x-ether" to the platform driver's ID table. Change the Ether platform device's name in the SH platform code accordingly. Signed-off-by:
-
Sergei Shtylyov authored
We are trying to get away from the current driver's scheme of identifying a SoC based on #ifdef's and the platform device ID table matching seems to be a good replacement -- we can use the 'driver_data' field of 'struct platform_device_id' as a pointer to a 'struct sh_eth_cpu_data'. Start by creating the initial table with driver's name as the only entry without the driver data. Check the driver data in the probe() method and if it's not NULL override 'mdp->cd' from it. Signed-off-by:
-
Rami Rosen authored
This patch fixes icmp_ignore_bogus_error_responses default value to be 1 instead of FALSE. It is initialized to 1 in icmp_sk_init(). Signed-off-by:
Rami Rosen <ramirose@gmail.com> Signed-off-by:
-
- 07 Jun, 2013 10 commits
-
-
Pablo Neira Ayuso authored
I can hit ENOBUFS in the sendmsg() path with a large batch that is composed of many netlink messages. Here that limit is 8 MBytes of skbuff data area as kmalloc does not manage to get more than that. While discussing atomic rule-set for nftables with Patrick McHardy, we decided to put all rule-set updates that need to be applied atomically in one single batch to simplify the existing approach. However, as explained above, the existing netlink code limits us to a maximum of ~20000 rules that fit in one single batch without hitting ENOBUFS. iptables does not have such limitation as it is using vmalloc. This patch adds netlink_alloc_large_skb() which is only used in the netlink_sendmsg() path. It uses alloc_skb if the memory requested is <= one memory page, that should be the common case for most subsystems, else vmalloc for higher memory allocations. Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Jay Vosburgh authored
Currently, if fail_over_mac is set to active, then attempts to change the MAC of the bond itself silently fail. However, if fail_over_mac is set to follow, changes are permitted. Permitting the bond's MAC to change with fail_over_mac=follow will disrupt the follow functionality, which normally controls the assignment of MAC address to the bond and its slaves, and can cause multiple ports to be assigned the same MAC address. which will interfere with the functioning of the device (where the device here is a virtualization-aware card for s390, qeth). Signed-off-by:
Jay Vosburgh <fubar@us.ibm.com> Signed-off-by:
-
Jay Vosburgh authored
This patch converts bonding to use the dev_uc/mc_sync and dev_uc/mc_sync_multiple functions for updating the hardware addresses of bonding slaves. The existing functions to add or remove addresses are removed, and their functionality is replaced with calls to dev_mc_sync or dev_mc_sync_multiple, depending upon the bonding mode. Calls to dev_uc_sync and dev_uc_sync_multiple are also added, so that unicast addresses added to a bond will be properly synced with its slaves. Various functions are renamed to better reflect the new situation, and relevant comments are updated. Signed-off-by:
-
Fabio Estevam authored
Passing pdev in fec_ptp_init() is enough, since we can get ndev locally. Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
-
Daniel Borkmann authored
Would be good to make things explicit and move those functions to a new file called tcp_offload.c, thus make this similar to tcpv6_offload.c. While moving all related functions into tcp_offload.c, we can also make some of them static, since they are only used there. Also, add an explicit registration function. Suggested-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Daniel Borkmann authored
We have the minimal inline helper tcp_skb_mss to access skb_shinfo(skb)->gso_size, so also use it here to get mss. Signed-off-by:
-
Daniel Borkmann authored
Remove the definition of HAVE_VLAN_PUT_TAG since it's not used or exported anywhere. Signed-off-by:
-
Daniel Borkmann authored
This patch simplifies the tpacket_v3 example code a bit by getting rid of unecessary macro wrappers, removing some debugging code so that it is more to the point, and also adds a header comment. Now this example code is the very minimum one needs to start from when dealing with tpacket_v3 and ~100 lines smaller than before. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Merge 'net' into 'net-next' to get the MSG_CMSG_COMPAT regression fix. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fix from David Miller: "This is a quick one commit pull request to cure the regression introduced by the MSG_CMSG_COMPAT change." (Background: commit 1be374a0 completely broke 32-bit COMPAT handling by not only disallowing MSG_CMSG_COMPAT from user APIs, but clearing it in our own internal use too!) * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: Unbreak compat_sys_{send,recv}msg
-
- 06 Jun, 2013 26 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver fixes from Greg Kroah-Hartman: "Here are some staging and IIO driver fixes for the 3.10-rc5 release. All of them are tiny, and fix a number of reported issues (build and runtime)" Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> * tag 'staging-3.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio:inkern: Fix typo/bug in convert raw to processed. iio: frequency: ad4350: Fix bug / typo in mask inkern: iio_device_put after incorrect return/goto staging: alarm-dev: information leak in alarm_compat_ioctl() iio:callback buffer: free the scan_mask staging: alarm-dev: information leak in alarm_ioctl() drivers: staging: zcache: fix compile error staging: dwc2: fix value of dma_mask
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial driver fixes from Greg Kroah-Hartman: "Here are some small bugfixes, and one revert, of serial driver issues that have been reported" * tag 'tty-3.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "serial: 8250: Make SERIAL_8250_RUNTIME_UARTS work correctly" serial: samsung: enable clock before clearing pending interrupts during init serial/imx: disable hardware flow control at startup
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg Kroah-Hartman: "Here are a number of USB bugfixes and new device ids for the 3.10-rc5 tree. Nothing major here, a number of new device ids (and movement from the option to the zte_ev driver of a number of ids that we had previously gotten wrong, some xhci bugfixes, some usb-serial driver fixes that were recently found, some host controller fixes / reverts, and a variety of smaller other things" * tag 'usb-3.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (29 commits) USB: option,zte_ev: move most ZTE CDMA devices to zte_ev USB: option: blacklist network interface on Huawei E1820 USB: whiteheat: fix broken port configuration USB: serial: fix TIOCMIWAIT return value USB: mos7720: fix hardware flow control USB: keyspan: remove unused endpoint-array access USB: keyspan: fix bogus array index USB: zte_ev: fix broken open USB: serial: Add Option GTM681W to qcserial device table. USB: Serial: cypress_M8: Enable FRWD Dongle hidcom device USB: EHCI: fix regression related to qh_refresh() usbfs: Increase arbitrary limit for USB 3 isopkt length USB: zte_ev: fix control-message timeouts USB: mos7720: fix message timeouts USB: iuu_phoenix: fix bulk-message timeout USB: ark3116: fix control-message timeout USB: mos7840: fix DMA to stack USB: mos7720: fix DMA to stack USB: visor: fix initialisation of Treo/Kyocera devices USB: serial: fix Treo/Kyocera interrrupt-in urb context ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fixes from Bjorn Helgaas: "This fixes a crash when booting a 32-bit kernel via the EFI boot stub. PCI ROM from EFI x86/PCI: Map PCI setup data with ioremap() so it can be in highmem" * tag 'pci-v3.10-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: x86/PCI: Map PCI setup data with ioremap() so it can be in highmem -
Nicolas Ferre authored
GEM is able to adapt its DMA buffer size, so change the RX path to take advantage of this possibility and remove all kind of memcpy in this path. This modification introduces function pointers for managing differences between MACB and GEM adapter type. Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Nicolas Ferre authored
Macb Ethernet controller requires a RX buffer of 128 bytes. It is highly sub-optimal for Gigabit-capable GEM that is able to use a bigger DMA buffer. Change this constant and associated macros with data stored in the private structure. RX DMA buffer size has to be multiple of 64 bytes as indicated in DMA Configuration Register specification. Signed-off-by:
-
git://oss.sgi.com/xfs/xfsLinus Torvalds authored
Pull more xfs updates from Ben Myers: "Here are several fixes for filesystems with CRC support turned on: fixes for quota, remote attributes, and recovery. There is also some feature work related to CRCs: the implementation of CRCs for the inode unlinked lists, disabling noattr2/attr2 options when appropriate, and bumping the maximum number of ACLs. I would have preferred to defer this last category of items to 3.11. This would require setting a feature bit for the on-disk changes, so there is some pressure to get these in 3.10. I believe this represents the end of the CRC related queue. - Rework of dquot CRCs - Fix for remote attribute invalidation of a leaf - Fix ordering of transaction replay in recovery - Implement CRCs for inode unlinked list - Disable noattr2/attr2 mount options when CRCs are enabled - Bump the limitation of ACL entries for v5 superblocks" * tag 'for-linus-v3.10-rc5' of git://oss.sgi.com/xfs/xfs: xfs: increase number of ACL entries for V5 superblocks xfs: disable noattr2/attr2 mount options for CRC enabled filesystems xfs: inode unlinked list needs to recalculate the inode CRC xfs: fix log recovery transaction item reordering xfs: fix remote attribute invalidation for a leaf xfs: rework dquot CRCs
-
Nobuhiro Iwamatsu authored
Put '#ifdef CONFIG_PM' around sh_eth_runtime_nop() and 'sh_eth_dev_pm_ops'. Add '#define SH_ETH_PM_OPS' to facilitate initialization of driver's 'pm' field depending on whether CONFIG_PM is enabled. Signed-off-by:
Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> [Sergei: added the changelog, reworded the subject, changing the prefix.] Signed-off-by:
-
Nobuhiro Iwamatsu authored
This driver has sh_eth_reset() function for each SoC and this function is almost always the same, except for the several a bit different variations for Gigabit Ethernet. Consolidate every variation into a single function -- which allows us to get rid of some more #ifdef'fery. Signed-off-by:
-
Nobuhiro Iwamatsu authored
We can simply remove #ifdef'fery around sh_eth_select_mii(). We have to annotate it with '__maybe_unused' then. Signed-off-by:
-
Nobuhiro Iwamatsu authored
The driver supports some SH and SH-Mobile SOCs. There are SOCs with two or more Ethernet devices, for these we need to pass IRQF_SHARED to request_irq(). Add the 'irq_flags' field to the 'struct sh_eth_cpu_data' instead of #ifdef'fery. Signed-off-by:
-
Nobuhiro Iwamatsu authored
Remove SH_ETH_HAS_TSU #define's and #ifdef's. Set three 'struct net_device_ops' methods that depend on the presence of TSU basing on the 'tsu' field of 'struct sh_eth_cpu_data'. Signed-off-by:
-
Nobuhiro Iwamatsu authored
Remove all the duplicate definitions of sh_eth_set_duplex() under different #ifdef's, leaving only one outside the #ifdef's. We have to annotate it with '__maybe_unused' since it's called not from all SoC #ifdef blocks. Signed-off-by:
-
Nobuhiro Iwamatsu authored
Use now always available EDSR_ENALL instead of the bare number to set EDSR. Signed-off-by:
-
Nobuhiro Iwamatsu authored
Remove #ifdef around 'enum EDSR_BIT' and 'enum GECMR_BIT', replacing it with the comments on which SoCs these registers exist. SH7757 also has EDSR, so add a comment about it to 'enum EDSR_BIT'. Signed-off-by:
-
Andy Lutomirski authored
I broke them in this commit: commit 1be374a0 Author: Andy Lutomirski <luto@amacapital.net> Date: Wed May 22 14:07:44 2013 -0700 net: Block MSG_CMSG_COMPAT in send(m)msg and recv(m)msg This patch adds __sys_sendmsg and __sys_sendmsg as common helpers that accept MSG_CMSG_COMPAT and blocks MSG_CMSG_COMPAT at the syscall entrypoints. It also reverts some unnecessary checks in sys_socketcall. Apparently I was suffering from underscore blindness the first time around. Signed-off-by:Andy Lutomirski <luto@amacapital.net> Tested-by:
-
Dan Williams authored
Per some ZTE Linux drivers I found for the AC2716, the following patch moves most ZTE CDMA devices from option to zte_ev. The blacklist stuff that option does is not required with zte_ev, because it doesn't implement any of the send_setup hooks which the blacklist suppressed. I did not move the 2718 over because I could not find any ZTE Linux drivers for that device, nor even any Windows drivers. Signed-off-by:
Dan Williams <dcbw@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Bjørn Mork authored
The mode used by Windows for the Huawei E1820 will use the same ff/ff/ff class codes for both serial and network functions. Reported-by:
Graham Inggs <graham.inggs@uct.ac.za> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Johan Hovold authored
When configuring the port (e.g. set_termios) the port minor number rather than the port number was used in the request (and they only coincide for minor number 0). Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <jhovold@gmail.com> Signed-off-by:
-
Dave Chinner authored
The limit of 25 ACL entries is arbitrary, but baked into the on-disk format. For version 5 superblocks, increase it to the maximum nuber of ACLs that can fit into a single xattr. Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Mark Tinguely <tinuguely@sgi.com> Signed-off-by:
Ben Myers <bpm@sgi.com> (cherry picked from commit 5c87d4bc)
-
Dave Chinner authored
attr2 format is always enabled for v5 superblock filesystems, so the mount options to enable or disable it need to be cause mount errors. Signed-off-by:
-
Dave Chinner authored
The inode unlinked list manipulations operate directly on the inode buffer, and so bypass the inode CRC calculation mechanisms. Hence an inode on the unlinked list has an invalid CRC. Fix this by recalculating the CRC whenever we modify an unlinked list pointer in an inode, ncluding during log recovery. This is trivial to do and results in unlinked list operations always leaving a consistent inode in the buffer. Signed-off-by:
Mark Tinguely <tinguely@sgi.com> Signed-off-by:
-
Dave Chinner authored
There are several constraints that inode allocation and unlink logging impose on log recovery. These all stem from the fact that inode alloc/unlink are logged in buffers, but all other inode changes are logged in inode items. Hence there are ordering constraints that recovery must follow to ensure the correct result occurs. As it turns out, this ordering has been working mostly by chance than good management. The existing code moves all buffers except cancelled buffers to the head of the list, and everything else to the tail of the list. The problem with this is that is interleaves inode items with the buffer cancellation items, and hence whether the inode item in an cancelled buffer gets replayed is essentially left to chance. Further, this ordering causes problems for log recovery when inode CRCs are enabled. It typically replays the inode unlink buffer long before it replays the inode core changes, and so the CRC recorded in an unlink buffer is going to be invalid and hence any attempt to validate the inode in the buffer is going to fail. Hence we really need to enforce the ordering that the inode alloc/unlink code has expected log recovery to have since inode chunk de-allocation was introduced back in 2003... Signed-off-by:
-
Dave Chinner authored
When invalidating an attribute leaf block block, there might be remote attributes that it points to. With the recent rework of the remote attribute format, we have to make sure we calculate the length of the attribute correctly. We aren't doing that in xfs_attr3_leaf_inactive(), so fix it. Signed-off-by:
-
Dave Chinner authored
Calculating dquot CRCs when the backing buffer is written back just doesn't work reliably. There are several places which manipulate dquots directly in the buffers, and they don't calculate CRCs appropriately, nor do they always set the buffer up to calculate CRCs appropriately. Firstly, if we log a dquot buffer (e.g. during allocation) it gets logged without valid CRC, and so on recovery we end up with a dquot that is not valid. Secondly, if we recover/repair a dquot, we don't have a verifier attached to the buffer and hence CRCs are not calculated on the way down to disk. Thirdly, calculating the CRC after we've changed the contents means that if we re-read the dquot from the buffer, we cannot verify the contents of the dquot are valid, as the CRC is invalid. So, to avoid all the dquot CRC errors that are being detected by the read verifier, change to using the same model as for inodes. That is, dquot CRCs are calculated and written to the backing buffer at the time the dquot is flushed to the backing buffer. If we modify the dquot directly in the backing buffer, calculate the CRC immediately after the modification is complete. Hence the dquot in the on-disk buffer should always have a valid CRC. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Conflicts: net/netfilter/nf_log.c The conflict in nf_log.c is that in 'net' we added CONFIG_PROC_FS protection around foo_proc_entry() calls to fix a build failure, whereas in Pablo's tree a guard if() test around a call is remove_proc_entry() was removed. Trivially resolved. Pablo Neira Ayuso says: ==================== The following patchset contains the first batch of Netfilter/IPVS updates for your net-next tree, they are: * Three patches with improvements and code refactorization for nfnetlink_queue, from Florian Westphal. * FTP helper now parses replies without brackets, as RFC1123 recommends, from Jeff Mahoney. * Rise a warning to tell everyone about ULOG deprecation, NFLOG has been already in the kernel tree for long time and supersedes the old logging over netlink stub, from myself. * Don't panic if we fail to load netfilter core framework, just bail out instead, from myself. * Add cond_resched_rcu, used by IPVS to allow rescheduling while walking over big hashtables, from Simon Horman. * Change type of IPVS sysctl_sync_qlen_max sysctl to avoid possible overflow, from Zhang Yanfei. * Use strlcpy instead of strncpy to skip zeroing of already initialized area to write the extension names in ebtables, from Chen Gang. * Use already existing per-cpu notrack object from xt_CT, from Eric Dumazet. * Save explicit socket lookup in xt_socket now that we have early demux, also from Eric Dumazet. ==================== Signed-off-by:
-
