- 13 Jan, 2014 18 commits
-
-
Sascha Hauer authored
Non removable cards are always present, so do not call get_cd for them. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Mika Westerberg authored
Newer Intel PCHs with LPSS have the same SDHCI controller than Haswell but ACPI ID is different. Add this ID to the driver list. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Laurent Pinchart authored
Turn clk_enable() and clk_disable() calls into clk_prepare_enable() and clk_disable_unprepare() to get ready for the migration to the common clock framework. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Fabio Estevam authored
Fix the following sparse warning: drivers/mmc/host/sdhci-esdhc-imx.c:617:35: warning: Using plain integer as NULL pointer Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Chuansheng Liu authored
In function sdhci_request(), it is possible to do the tuning execution like below: sdhci_request() { spin_lock_irqsave(&host->lock, flags); host->mrq = mrq; ... spin_unlock_irqrestore(&host->lock, flags); <=== Here it is possible one pending finish_tasklet get running and it will operate the original mrq, and notified the mrq is done, and causes memory corruption. sdhci_execute_tuning(mmc, tuning_opcode); spin_lock_irqsave(&host->lock, flags); host->mrq = mrq; ... } In the above race place, the original mrq should not be finished wrongly, so here before unlock the spinlock, we need to set the host->mrq to NULL to avoid this case. Signed-off-by: Liu, Chuansheng <chuansheng.liu@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Guennadi Liakhovetski authored
Since I'm currently unable to dedicate sufficient time to driver maintainership, remove myself from the maintainers list. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Ludovic Desroches authored
With some SDIO devices, timeout errors can happen when reading data. To solve this issue, the DMA transfer has to be activated before sending the command to the device. This order is incorrect in PDC mode. So we have to take care if we are using DMA or PDC to know when to send the MMC command. Cc: stable <stable@vger.kernel.org> # 3.2+ Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Kuninori Morimoto authored
02cb3221 ("mmc: tmio: support caps2 flags") added caps2 support on tmio, but it overwrites mmc_of_parse() settings. This patch fixes it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Laurent <laurent.pinchart@ideasonboard.com> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Ray Jui authored
Under function mmc_blk_issue_rq, after an MMC discard operation, the MMC request data structure may be freed in memory. Later in the same function, the check of req->cmd_flags & MMC_REQ_SPECIAL_MASK is dangerous and invalid. It causes the MMC host not to be released when it should. This patch fixes the issue by marking the special request down before the discard/flush operation. Reported by: Harold (SoonYeal) Yang <haroldsy@broadcom.com> Signed-off-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Dong Aisheng authored
The root clock will be disabled in runtime pm to save power. Signed-off-by: Dong Aisheng <b29396@freescale.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Dong Aisheng authored
Since we're using common esdhc_send_command for tuning commands and the core code will call pm_runtime_put after command is finished. So we add a pm_runtime_get_sync here to get the balance. Signed-off-by: Dong Aisheng <b29396@freescale.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Dong Aisheng authored
Current code will clear all turning related bits like ESDHC_STD_TUNING_EN and ESDHC_MIX_CTRL_FBCLK_SEL when clear SDHCI_CTRL_EXEC_TUNING. This may cause the card which has already passed the turning to become unwork since the turning status lost. We observed this failure when enable runtime pm. BTW, imx needs to enable ESDHC_MIX_CTRL_FBCLK_SEL bit for turned clock. The FBCLK_SEL will be cleared when SDHCI_CTRL_TUNED_CLK is cleared and SDHCI_CTRL_EXEC_TUNING is not set. This is used in case we change to another normal card from a UHS card in the same slot. FBCLK_SEL is not needed for normal card. After that, SDHCI_CTRL_EXEC_TUNING will only affect ESDHC_MIX_CTRL_EXE_TUNE. Clearing it does not affect the turned card to remain working on UHS mode. Signed-off-by: Dong Aisheng <b29396@freescale.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Dong Aisheng authored
We should not clear tuning bits during reset or the SD3.0/eMMC4.5 card working on UHS mode may not work after reset since the former tuning settings was lost. Signed-off-by: Dong Aisheng <b29396@freescale.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Dong Aisheng authored
It is helpful for platform code to use to eliminate duplicated code. Signed-off-by: Dong Aisheng <b29396@freescale.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Dong Aisheng authored
Add support for eMMC 4.5 cards to work on hs200 mode. Signed-off-by: Dong Aisheng <b29396@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Dong Aisheng authored
The MMC_CAP_UHS_DDR50 must work on 1.8v. However, the eMMC DDR mode can work on either 1.8v or 3.3v and should not depend on UHS_DDR50. So get rid of this limitation to let controller without 1.8v signal voltage support can also work for eMMC DDR mode if it claims. Signed-off-by: Dong Aisheng <b29396@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Dong Aisheng authored
The i.MX6 supports 1.8v/3.3v eMMC DDR mode, so add this flag. Signed-off-by: Dong Aisheng <b29396@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Dong Aisheng authored
We should use '|=' instead '=', or it may over write the original caps assigned before this line. Signed-off-by: Dong Aisheng <b29396@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
-
- 26 Nov, 2013 8 commits
-
-
Dong Aisheng authored
Used to read out the correct value of SDHCI_TRANSFER_MODE register for upper layer. Signed-off-by: Dong Aisheng <b29396@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Dong Aisheng authored
The auto cmd settings bits should be cleared before sending new commands or we may receive command timeout error for normal commands due to wrongly pre-sent auto cmd. e.g. we receive CMD13 timeout error due to ACMD23 is wrongly enabled by former data commands. mmc2: new high speed DDR MMC card at address 0001 mmcblk1: mmc2:0001 SEM08G 7.39 GiB mmcblk1boot0: mmc2:0001 SEM08G partition 1 2.00 MiB mmcblk1boot1: mmc2:0001 SEM08G partition 2 2.00 MiB mmcblk1rpmb: mmc2:0001 SEM08G partition 3 128 KiB mmcblk1: p1 p2 p3 p4 < p5 p6 p7 > mmc2: Timeout waiting for hardware interrupt. mmcblk1boot1: unknown partition table mmc2: Timeout waiting for hardware interrupt. mmcblk1boot0: unknown partition table Signed-off-by: Dong Aisheng <b29396@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "Mostly bugfixes and a few small code removals. Worth pointing out is: - A handful of more fixes to get DT enablement working properly on OMAP, finding new breakage of things that don't work quite right yet without the traditional board files. I expect a bit more of this to come in this release as people test on their hardware. - Implementation of power_down_finish() on vexpress, to make kexec work and to stop the MCPM core to produce a warning (the warning was new to 3.13-rc1). - A handful of minor fixes for various platforms" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: bcm2835: add missing #xxx-cells to I2C nodes ARM: dts: Add max77686 RTC interrupt to cros5250-common ARM: vexpress/TC2: Implement MCPM power_down_finish() ARM: tegra: Provide dummy powergate implementation ARM: omap: fix warning with LPAE build ARM: OMAP2+: Remove legacy omap4_twl6030_hsmmc_init ARM: OMAP2+: Remove legacy mux code for display.c ARM: OMAP2+: Fix undefined reference to set_cntfreq gpio: twl4030: Fix passing of pdata in the device tree case gpio: twl4030: Fix regression for twl gpio output ARM: OMAP2+: More randconfig fixes for reconfigure_io_chain ARM: dts: imx6qdl: disable spdif "rxtx5" clock option ARM: dts: Fix omap2 specific dtsi files by adding the missing entries ARM: OMAP2+: Fix GPMC and simplify bootloader timings for 8250 and smc91x i2c: omap: Fix missing device tree flags for omap2
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds authored
Pull IMA fixes from James Morris: "These three patches fix regressions in the IMA code in your current tree. The first fixes a couple of bugs in template_desc_init_fields(), and the other two ensure that changes in this kernel don't break userspace" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: ima: make a copy of template_fmt in template_desc_init_fields() ima: do not send field length to userspace for digest of ima template ima: do not include field length in template digest calc for ima template
-
git://github.com/jonmason/ntbLinus Torvalds authored
Pull non-transparent bridge updates from Jon Mason: "NTB driver bug fixes to address a missed call to pci_enable_msix, NTB-RP Link Up issue, Xeon Doorbell errata workaround, ntb_transport link down race, and correct dmaengine_get/put usage. Also, clean-ups to remove duplicate defines and document a hardware errata. Finally, some changes to improve performance" * tag 'ntb-3.13' of git://github.com/jonmason/ntb: NTB: Disable interrupts and poll under high load NTB: Enable Snoop on Primary Side NTB: Document HW errata NTB: remove duplicate defines NTB: correct dmaengine_get/put usage NTB: Fix ntb_transport link down race ntb: Fix missed call to pci_enable_msix() NTB: Fix NTB-RP Link Up NTB: Xeon Doorbell errata workaround
-
Stephen Warren authored
The I2C controller node needs #address-cells and #size-cells properties, but these are currently missing. Add them. This allows child nodes to be parsed correctly. Cc: stable@vger.kernel.org Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Mattia Dongili authored
Follow-up to commit 294d31e8 ("sony-laptop: don't change keyboard backlight settings"): avoid messing up the state on resume. Leave it to what was before suspending as it's anyway likely that we still don't know what value we should write to the EC registers. This fix is also required in 3.12 Cc: stable@vger.kernel.org Tested-by: Karol Babioch <karol@babioch.de> Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
James Morris authored
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity into for-linus
-
- 25 Nov, 2013 10 commits
-
-
git://git.linaro.org/people/shawnguo/linux-2.6Kevin Hilman authored
The imx fixes for 3.13, part 2: - Disable S/PDIF "rxtx5" clock option to fix the clocksource breakage introduced by S/PDIF driver * tag 'imx-fixes-3.13-2' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: dts: imx6qdl: disable spdif "rxtx5" clock option Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Doug Anderson authored
Without the interrupt you'll get problems if you enable CONFIG_RTC_DRV_MAX77686. Setup the interrupt properly in the device tree. Signed-off-by: Doug Anderson <dianders@chromium.org> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net> Cc: stable@vger.kernel.org
-
Dave Martin authored
This patch implements the power_down_finish() method for TC2, to enable the kernel to confirm when CPUs are safely powered down. The information required for determining when a CPU is parked cannot be obtained from any single place, so a few sources of information must be combined: * mcpm_cpu_power_down() must be pending for the CPU, so that we don't get confused by false STANDBYWFI positives arising from CPUidle. This is detected by waiting for the tc2_pm use count for the target CPU to reach 0. * Either the SPC must report that the CPU has asserted STANDBYWFI, or the TC2 tile's reset control logic must be holding the CPU in reset. Just checking for STANDBYWFI is not sufficient, because this signal is not latched when the the cluster is clamped off and powered down: the relevant status bits just drop to zero. This means that STANDBYWFI status cannot be used for reliable detection of the last CPU in a cluster reaching WFI. This patch is required in order for kexec to work with MCPM on TC2. MCPM code was changed in commit 0de0d646 ('ARM: 7848/1: mcpm: Implement cpu_kill() to synchronise on powerdown'), and since then it will hit a WARN_ON_ONCE() due to power_down_finish not being implemented on the TC2 platform. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Acked-by: Pawel Moll <pawel.moll@arm.com> Reviewed-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Thierry Reding authored
In order to support increased build test coverage for drivers, implement dummies for the powergate implementation. This will allow the drivers to be built without requiring support for Tegra to be selected. This patch solves the following build errors, which can be triggered in v3.13-rc1 by selecting DRM_TEGRA without ARCH_TEGRA: drivers/built-in.o: In function `gr3d_remove': drivers/gpu/drm/tegra/gr3d.c:321: undefined reference to `tegra_powergate_power_off' drivers/gpu/drm/tegra/gr3d.c:325: undefined reference to `tegra_powergate_power_off' drivers/built-in.o: In function `gr3d_probe': drivers/gpu/drm/tegra/gr3d.c:266: undefined reference to `tegra_powergate_sequence_power_up' drivers/gpu/drm/tegra/gr3d.c:273: undefined reference to `tegra_powergate_sequence_power_up' Signed-off-by: Thierry Reding <treding@nvidia.com> [swarren, updated commit description] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'omap-for-v3.13/more-fixes-for-merge-window-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: Few more fixes for issues found booting older omaps using device tree. Also few randconfig build fixes and removal of some dead code for omap4 as it no longer has legacy platform data based booting support. * tag 'omap-for-v3.13/more-fixes-for-merge-window-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Remove legacy omap4_twl6030_hsmmc_init ARM: OMAP2+: Remove legacy mux code for display.c ARM: OMAP2+: Fix undefined reference to set_cntfreq gpio: twl4030: Fix passing of pdata in the device tree case gpio: twl4030: Fix regression for twl gpio output ARM: OMAP2+: More randconfig fixes for reconfigure_io_chain ARM: dts: Fix omap2 specific dtsi files by adding the missing entries ARM: OMAP2+: Fix GPMC and simplify bootloader timings for 8250 and smc91x i2c: omap: Fix missing device tree flags for omap2
-
Olof Johansson authored
Some omap3 code is throwing a warning: arch/arm/mach-omap2/pm34xx.c: In function 'omap3_save_secure_ram_context': arch/arm/mach-omap2/pm34xx.c:123:32: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] In reality this code will never actually execute with LPAE=y, since Cortex-A8 doesn't support it. So downcasting the __pa() is safe in this case. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Tony Lindgren <tony@atomide.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulatorLinus Torvalds authored
Pull regulator fixes from Mark Brown: "A bunch of fixes, a few driver specific ones and a framework fix for voltage enumeration on fixed voltage regulators which had previously worked but had been misplaced during some refactoring causing problems for users that needed to know the voltage" * tag 'regulator-v3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: arizona-micsupp: Correct wm5110 voltage selection regulator: pfuze100: allow misprogrammed ID regulator: fixed: fix regulator_list_voltage() for regression regulator: gpio-regulator: Don't oops on missing regulator-type property
-
Roberto Sassu authored
This patch makes a copy of the 'template_fmt' function argument so that the latter will not be modified by strsep(), which does the splitting by replacing the given separator with '\0'. IMA: No TPM chip found, activating TPM-bypass! Unable to handle kernel pointer dereference at virtual kernel address 0000000000842000 Oops: 0004 [#1] SMP Modules linked in: CPU: 3 PID: 1 Comm: swapper/0 Not tainted 3.12.0-rc2-00098-g3ce1217d #17 task: 000000003ffa0000 ti: 000000003ff84000 task.ti: 000000003ff84000 Krnl PSW : 0704e00180000000 000000000044bf88 (strsep+0x7c/0xa0) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 EA:3 Krnl GPRS: 000000000000007c 000000000000007c 000000003ff87d90 0000000000821fd8 0000000000000000 000000000000007c 0000000000aa37e0 0000000000aa9008 0000000000000051 0000000000a114d8 0000000100000002 0000000000842bde 0000000000842bdf 00000000006f97f0 000000000040062c 000000003ff87cf0 Krnl Code: 000000000044bf7c: a7f4000a brc 15,44bf90 000000000044bf80: b90200cc ltgr %r12,%r12 #000000000044bf84: a7840006 brc 8,44bf90 >000000000044bf88: 9200c000 mvi 0(%r12),0 000000000044bf8c: 41c0c001 la %r12,1(%r12) 000000000044bf90: e3c020000024 stg %r12,0(%r2) 000000000044bf96: b904002b lgr %r2,%r11 000000000044bf9a: ebbcf0700004 lmg %r11,%r12,112(%r15) Call Trace: ([<00000000004005fe>] ima_init_template+0xa2/0x1bc) [<0000000000a7c896>] ima_init+0x7a/0xa8 [<0000000000a7c938>] init_ima+0x24/0x40 [<00000000001000e8>] do_one_initcall+0x68/0x128 [<0000000000a4eb56>] kernel_init_freeable+0x20a/0x2b4 [<00000000006a1ff4>] kernel_init+0x30/0x178 [<00000000006b69fe>] kernel_thread_starter+0x6/0xc [<00000000006b69f8>] kernel_thread_starter+0x0/0xc Last Breaking-Event-Address: [<000000000044bf42>] strsep+0x36/0xa0 Fixes commit: adf53a77 ima: new templates management mechanism Changelog v1: - make template_fmt 'const char *' (reported-by James Morris) - fix kstrdup memory leak (reported-by James Morris) Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Roberto Sassu <roberto.sassu@polito.it> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
-
Roberto Sassu authored
This patch defines a new value for the 'ima_show_type' enumerator (IMA_SHOW_BINARY_NO_FIELD_LEN) to prevent that the field length is transmitted through the 'binary_runtime_measurements' interface for the digest field of the 'ima' template. Fixes commit: 3ce1217 ima: define template fields library and new helpers Signed-off-by: Roberto Sassu <roberto.sassu@polito.it> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
-
Roberto Sassu authored
To maintain compatibility with userspace tools, the field length must not be included in the template digest calculation for the 'ima' template. Fixes commit: a71dc65d ima: switch to new template management mechanism Signed-off-by: Roberto Sassu <roberto.sassu@polito.it> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
-
- 24 Nov, 2013 4 commits
-
-
Randy Dunlap authored
Fix kernel-doc warning for duplicate definition of 'kmalloc': Documentation/DocBook/kernel-api.xml:9483: element refentry: validity error : ID API-kmalloc already defined <refentry id="API-kmalloc"> Also combine the kernel-doc info from the 2 kmalloc definitions into one block and remove the "see kcalloc" comment since kmalloc now contains the @flags info. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Christoph Lameter <cl@linux.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input updates from Dmitry Torokhov: "A new driver for Surface 2.0/Pixelsense touchscreen and a couple of driver fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: MAINTAINERS - add keyboard driver to Hyper-V file list Input: atmel-wm97xx - fix compile error Input: hp_sdc_rtc - unlock on error in hp_sdc_rtc_read_i8042timer() Input: cyttsp4 - remove unnecessary work pending test Input: add sur40 driver for Samsung SUR40 (aka MS Surface 2.0/Pixelsense)
-
Mark Brown authored
-
Mark Brown authored
-