- 04 Feb, 2020 5 commits
-
-
Douglas Anderson authored
The test clock isn't in the bindings and apparently it's not used by anyone upstream. Remove it. Suggested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lkml.kernel.org/r/20200203103049.v4.5.I28ac8f801456f1b950f7da10ed0f74a1344d4a35@changeidSigned-off-by: Stephen Boyd <sboyd@kernel.org>
-
Douglas Anderson authored
In the new world input clocks should be matched by ".fw_name". sc7180 is new enough that no backward compatibility use of global names should be needed. Remove it. With a proper device tree and downstream display patches I have verified booting a sc7180 up and seeing the display after this patch. Fixes: dd3d0662 ("clk: qcom: Add display clock controller driver for SC7180") Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lkml.kernel.org/r/20200203103049.v4.4.Ia3706a5d5add72e88dbff60fd13ec06bf7a2fd48@changeidSigned-off-by: Stephen Boyd <sboyd@kernel.org>
-
Douglas Anderson authored
The qcom,dispcc bindings had a few problems with them: 1. They didn't specify all the clocks that dispcc is a client of. Specifically on sc7180 there are two clocks from the DSI PHY and two from the DP PHY. On sdm845 there are actually two DSI PHYs (each of which has two clocks) and an extra clock from the gcc. These all need to be specified. 2. The sdm845.dtsi has existed for quite some time without specifying the clocks. The Linux driver was relying on global names to match things up. While we should transition things, it should be noted in the bindings. 3. The names used the bindings for "xo" and "gpll0" didn't match the names that QC used for these clocks internally and this was causing confusion / difficulty with their code generation tools. Switched to the internal names to simplify everyone's lives. It's not quite as clean in a purist sense but it should avoid headaches. This officially changes the binding, but that seems OK in this case. Also note that I updated the example. Fixes: 5d28e44b ("dt-bindings: clock: Add YAML schemas for the QCOM DISPCC clock bindings") Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lkml.kernel.org/r/20200203103049.v4.2.I0c4bbb0f75a0880cd4bd90d8b267271e2375e0d0@changeidSigned-off-by: Stephen Boyd <sboyd@kernel.org>
-
Douglas Anderson authored
When I got my clock parenting slightly wrong I ended up with a crash that looked like this: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 ... pc : clk_hw_get_rate+0x14/0x44 ... Call trace: clk_hw_get_rate+0x14/0x44 _freq_tbl_determine_rate+0x94/0xfc clk_rcg2_determine_rate+0x2c/0x38 clk_core_determine_round_nolock+0x4c/0x88 clk_core_round_rate_nolock+0x6c/0xa8 clk_core_round_rate_nolock+0x9c/0xa8 clk_core_set_rate_nolock+0x70/0x180 clk_set_rate+0x3c/0x6c of_clk_set_defaults+0x254/0x360 platform_drv_probe+0x28/0xb0 really_probe+0x120/0x2dc driver_probe_device+0x64/0xfc device_driver_attach+0x4c/0x6c __driver_attach+0xac/0xc0 bus_for_each_dev+0x84/0xcc driver_attach+0x2c/0x38 bus_add_driver+0xfc/0x1d0 driver_register+0x64/0xf8 __platform_driver_register+0x4c/0x58 msm_drm_register+0x5c/0x60 ... It turned out that clk_hw_get_parent_by_index() was returning NULL and we weren't checking. Let's check it so that we don't crash. Fixes: ac269395 ("clk: qcom: Convert to clk_hw based provider APIs") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lkml.kernel.org/r/20200203103049.v4.1.I7487325fe8e701a68a07d3be8a6a4b571eca9cfa@changeidSigned-off-by: Stephen Boyd <sboyd@kernel.org>
-
Colin Ian King authored
Currently the pointer 'parent' is being dereferenced before it is being null checked. Fix this by performing the null check before it is dereferenced. Addresses-Coverity: ("Dereference before null check") Fixes: d37010a3 ("clk: ls1028a: Add clock driver for Display output interface") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lkml.kernel.org/r/20200203223736.99645-1-colin.king@canonical.comSigned-off-by: Stephen Boyd <sboyd@kernel.org>
-
- 03 Feb, 2020 4 commits
-
-
Douglas Anderson authored
The 'qcom,gcc.yaml' file failed self-validation (dt_binding_check) because it required a property to be either (3 entries big), (3 entries big), or (7 entries big), but not more than one of those things. That didn't make a ton of sense. This patch splits all of the exceptional device trees (AKA those that would have needed if/then/else rules) from qcom,gcc.yaml. It also cleans up some cruft found while doing that. After this lands, this worked for me atop clk-next with just the known error about msm8998: for f in \ Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml \ Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml \ Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml \ Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml \ Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml \ Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml \ Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml \ Documentation/devicetree/bindings/clock/qcom,gcc.yaml; do \ ARCH=arm64 make dtbs_check DT_SCHEMA_FILES=$f; \ done I then picked this patch atop linux-next (next-20200129) and ran: # Delete broken yaml: rm Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml ARCH=arm64 make dt_binding_check | grep 'clock/qcom' ...and that didn't seem to indicate problems. Arbitrary decisions made (yell if you want changed): - Left all the older devices (where clocks / clock-names weren't specified) in a single file. - Didn't make clocks "required" for msm8996 but left them as listed. This seems a little weird but it matches the old binding. Misc cleanups as part of this patch: - Fixed schema id to not have "bindings/" as per Rob [1]. - Listed include files as per Stephen. - sm8150 was claimed to be same set of clocks as sc7180, but driver and dts appear to say that "bi_tcxo_ao" doesn't exist. Fixed. - In "apq8064", "#thermal-sensor-cells" was missing the "#". - Got rid of "|" at the end of top description since spacing doesn't matter. - Changed indentation to consistently 2 spaces (it was 3 in some places). - Added period at the end of protected-clocks description. - No space before ":". - Updated sc7180/sm8150 example to use the 'qcom,rpmh.h' include. - Updated sc7180/sm8150 example to use larger address/size cells as per reality. - Updated sc7180/sm8150 example to point to the sleep_clk rather than <0>. - Made it so that gcc-ipq8074 didn't require #power-domain-cells since actual dts didn't have it and I got no hits from: git grep _GDSC include/dt-bindings/clock/qcom,gcc-ipq8074.h - Made it so that gcc-qcs404 didn't require #power-domain-cells since actual dts didn't have it and I got no hits from: git grep _GDSC include/dt-bindings/clock/qcom,gcc-qcs404.h Noticed, but not done in this patch (volunteers needed): - Add "aud_ref_clk" to sm8150 bindings / dts even though I found a reference to it in "gcc-sm8150.c". - Fix node name in actual ipq8074 to be "clock-controller" (it's gcc). - Since the example doesn't need phandes to exist, in msm8998 could just make up places providing some of the clocks currently bogused out with <0>. - On msm8998 clocks are listed as required but current dts doesn't have them. [1] https://lore.kernel.org/r/CAL_Jsq+_2E-bAbP9F6VYkWRp0crEyRGa5peuwP58-PZniVny7w@mail.gmail.com Fixes: ab91f72e ("clk: qcom: gcc-msm8996: Fix parent for CLKREF clocks") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Link: https://lkml.kernel.org/r/20200203094843.v3.1.I4452dc951d7556ede422835268742b25a18b356b@changeidSigned-off-by: Stephen Boyd <sboyd@kernel.org>
-
Stephen Boyd authored
The DFS frequency table logic overwrites 'cfg' while detecting the parent clk and then later on in clk_rcg2_dfs_populate_freq() we use that same variable to figure out the mode of the clk, either MND or not. Add a new variable to hold the parent clk bit so that 'cfg' is left untouched for use later. This fixes problems in detecting the supported frequencies for any clks in DFS mode. Fixes: cc4f6944 ("clk: qcom: Add support for RCG to register for DFS") Reported-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20200128193329.45635-1-sboyd@kernel.orgTested-by: Rajendra Nayak <rnayak@codeaurora.org>
-
Stephen Boyd authored
Having 'bindings' in here causes a warning when checking the schema. Documentation/devicetree/bindings/clock/fsl,plldig.yaml: $id: relative path/filename doesn't match actual path or filename expected: http://devicetree.org/schemas/clock/fsl,plldig.yaml# Remove it. Cc: Rob Herring <robh+dt@kernel.org> Cc: Wen He <wen.he_1@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20200203052507.93215-2-sboyd@kernel.orgAcked-by: Rob Herring <robh@kernel.org>
-
Stephen Boyd authored
These constants are used in clamp() with the value being clamped an unsigned long. Make them unsigned long defines so that clamp() doesn't complain about comparing different types. In file included from include/linux/list.h:9, from include/linux/kobject.h:19, from include/linux/of.h:17, from include/linux/clk-provider.h:9, from drivers/clk/clk-plldig.c:8: drivers/clk/clk-plldig.c: In function 'plldig_determine_rate': include/linux/kernel.h:835:29: warning: comparison of distinct pointer types lacks a cast 835 | (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1))) | Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Wen He <wen.he_1@nxp.com> Fixes: d37010a3 ("clk: ls1028a: Add clock driver for Display output interface") Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20200203052507.93215-1-sboyd@kernel.org
-
- 31 Jan, 2020 7 commits
-
-
Stephen Boyd authored
Merge branches 'clk-imx', 'clk-ti', 'clk-xilinx', 'clk-nvidia', 'clk-qcom', 'clk-freescale' and 'clk-qoriq' into clk-next - Support for Xilinx Versal platform clks - Display clk controller on qcom sc7180 - Video clk controller on qcom sc7180 - Graphics clk controller on qcom sc7180 - CPU PLLs for qcom msm8916 - Fixes for clk controllers on qcom msm8998 SoCs - Move qcom msm8974 gfx3d clk to RPM control - Display port clk support on qcom sdm845 SoCs - Global clk controller on qcom ipq6018 - Adjust composite clk to new way of describing clk parents - Add a driver for BCLK of Freescale SAI cores * clk-imx: (32 commits) clk: imx: Add support for i.MX8MP clock driver dt-bindings: imx: Add clock binding doc for i.MX8MP clk: imx: gate4: Switch imx_clk_gate4_flags() to clk_hw based API clk: imx: imx8mq: Switch to clk_hw based API clk: imx: imx8mm: Switch to clk_hw based API clk: imx: imx8mn: Switch to clk_hw based API clk: imx: Remove __init for imx_obtain_fixed_clk_hw() API clk: imx: gate3: Switch to clk_hw based API clk: imx: add hw API imx_clk_hw_mux2_flags clk: imx: add imx_unregister_hw_clocks clk: imx: clk-composite-8m: Switch to clk_hw based API clk: imx: clk-pll14xx: Switch to clk_hw based API clk: imx7up: Rename the clks to hws clk: imx: Rename the imx_clk_divider_gate to imply it's clk_hw based clk: imx: Rename the imx_clk_pfdv2 to imply it's clk_hw based clk: imx: Rename the imx_clk_pllv4 to imply it's clk_hw based clk: imx: Rename sccg and frac pll register to suggest clk_hw clk: imx: imx7ulp composite: Rename to show is clk_hw based clk: imx: pllv2: Switch to clk_hw based API clk: imx: pllv1: Switch to clk_hw based API ... * clk-ti: clk: ti: clkctrl: Fix hidden dependency to node name clk: ti: add clkctrl data dra7 sgx clk: ti: omap5: Add missing AESS clock clk: ti: dra7: fix parent for gmac_clkctrl clk: ti: dra7: add vpe clkctrl data clk: ti: dra7: add cam clkctrl data dt-bindings: clock: Move ti-dra7-atl.h to dt-bindings/clock * clk-xilinx: clk: zynqmp: Add support for clock with CLK_DIVIDER_POWER_OF_TWO flag clk: zynqmp: Fix divider calculation clk: zynqmp: Add support for get max divider clk: zynqmp: Warn user if clock user are more than allowed clk: zynqmp: Extend driver for versal dt-bindings: clock: Add bindings for versal clock driver * clk-nvidia: clk: tegra20/30: Explicitly set parent clock for Video Decoder clk: tegra20/30: Don't pre-initialize displays parent clock clk: tegra: divider: Check UART's divider enable-bit state on rate's recalculation clk: tegra: clk-dfll: Remove call to pm_runtime_irq_safe() clk: tegra: Mark fuse clock as critical * clk-qcom: (35 commits) clk: qcom: rpmh: Sort OF match table dt-bindings: fix warnings in validation of qcom,gcc.yaml dt-binding: fix compilation error of the example in qcom,gcc.yaml clk: qcom: Add ipq6018 Global Clock Controller support clk: qcom: Add DT bindings for ipq6018 gcc clock controller clk: qcom: gcc-msm8996: Fix parent for CLKREF clocks clk: qcom: rpmh: Add IPA clock for SC7180 clk: qcom: rpmh: skip undefined clocks when registering clk: qcom: Add video clock controller driver for SC7180 dt-bindings: clock: Introduce SC7180 QCOM Video clock bindings dt-bindings: clock: Add YAML schemas for the QCOM VIDEOCC clock bindings clk: qcom: Add graphics clock controller driver for SC7180 dt-bindings: clock: Introduce SC7180 QCOM Graphics clock bindings dt-bindings: clock: Add YAML schemas for the QCOM GPUCC clock bindings clk: qcom: apcs-msm8916: use clk_parent_data to specify the parent clk: qcom: Add display clock controller driver for SC7180 dt-bindings: clock: Introduce QCOM sc7180 display clock bindings dt-bindings: clock: Add YAML schemas for the QCOM DISPCC clock bindings clk: qcom: clk-alpha-pll: Add support for Fabia PLL calibration clk: qcom: alpha-pll: Remove useless read from set rate ... * clk-freescale: clk: fsl-sai: new driver dt-bindings: clock: document the fsl-sai driver clk: composite: add _register_composite_pdata() variants * clk-qoriq: clk: qoriq: add ls1088a hwaccel clocks support clk: ls1028a: Add clock driver for Display output interface dt/bindings: clk: Add YAML schemas for LS1028A Display Clock bindings
-
Stephen Boyd authored
Merge branches 'clk-debugfs-danger', 'clk-basic-hw', 'clk-renesas', 'clk-amlogic' and 'clk-allwinner' into clk-next - Support dangerous debugfs actions on clks with dead code - Convert gpio, fixed-factor, mux, gate, divider basic clks to hw based APIs * clk-debugfs-danger: clk: Add support for setting clk_rate via debugfs * clk-basic-hw: clk: divider: Add support for specifying parents via DT/pointers clk: gate: Add support for specifying parents via DT/pointers clk: mux: Add support for specifying parents via DT/pointers clk: asm9260: Use parent accuracy in fixed rate clk clk: fixed-rate: Document that accuracy isn't a rate clk: fixed-rate: Add clk flags for parent accuracy clk: fixed-rate: Add support for specifying parents via DT/pointers clk: fixed-rate: Document accuracy member clk: fixed-rate: Move to_clk_fixed_rate() to C file clk: fixed-rate: Remove clk_register_fixed_rate_with_accuracy() clk: fixed-rate: Convert to clk_hw based APIs clk: gpio: Use DT way of specifying parents * clk-renesas: clk: renesas: Prepare for split of R-Car H3 config symbol dt-bindings: clock: renesas: cpg-mssr: Fix r8a774b1 typo clk: renesas: r7s9210: Add SPIBSC clock clk: renesas: rcar-gen3: Allow changing the RPC[D2] clocks clk: renesas: Remove use of ARCH_R8A7796 clk: renesas: rcar-gen2: Change multipliers and dividers to u8 * clk-amlogic: clk: clarify that clk_set_rate() does updates from top to bottom clk: meson: meson8b: make the CCF use the glitch-free mali mux clk: meson: pll: Fix by 0 division in __pll_params_to_rate() clk: meson: g12a: fix missing uart2 in regmap table clk: meson: meson8b: use of_clk_hw_register to register the clocks clk: meson: meson8b: don't register the XTAL clock when provided via OF clk: meson: meson8b: change references to the XTAL clock to use [fw_]name clk: meson: meson8b: use clk_hw_set_parent in the CPU clock notifier clk: meson: add a driver for the Meson8/8b/8m2 DDR clock controller dt-bindings: clock: meson8b: add the clock inputs dt-bindings: clock: add the Amlogic Meson8 DDR clock controller binding * clk-allwinner: clk: sunxi: a23/a33: Export the MIPI PLL clk: sunxi: a31: Export the MIPI PLL clk: sunxi-ng: a64: export CLK_CPUX clock for DVFS clk: sunxi-ng: add mux and pll notifiers for A64 CPU clock clk: sunxi-ng: r40: Export MBUS clock clk: sunxi: use of_device_get_match_data
-
Stephen Boyd authored
Merge branches 'clk-uniphier', 'clk-warn-critical', 'clk-ux500', 'clk-kconfig' and 'clk-at91' into clk-next - Warn about critical clks that fail to enable or prepare - Detect more PRMCU variants in ux500 driver * clk-uniphier: clk: uniphier: Add SCSSI clock gate for each channel * clk-warn-critical: clk: Warn about critical clks that fail to enable clk: Don't try to enable critical clocks if prepare failed clk: tegra: Fix double-free in tegra_clk_init() clk: samsung: exynos5420: Keep top G3D clocks enabled clk: qcom: Avoid SMMU/cx gdsc corner cases clk: qcom: gcc-sc7180: Fix setting flag for votable GDSCs clk: Move clk_core_reparent_orphans() under CONFIG_OF clk: at91: fix possible deadlock clk: walk orphan list on clock provider registration clk: imx: pll14xx: fix clk_pll14xx_wait_lock clk: imx: clk-imx7ulp: Add missing sentinel of ulp_div_table clk: imx: clk-composite-8m: add lock to gate/mux * clk-ux500: clk: ux500: Fix up the SGA clock for some variants * clk-kconfig: clk: Fix Kconfig indentation * clk-at91: clk: at91: sam9x60: fix programmable clock prescaler clk: at91: sam9x60-pll: adapt PMC_PLL_ACR default value
-
Stephen Boyd authored
- Let clk_ops::init() return an error code - Add a clk_ops::terminate() callback to undo clk_ops::init() * clk-init-allocation: clk: add terminate callback to clk_ops clk: let init callback return an error code clk: actually call the clock init before any other callback of the clock * clk-unused: clk: bm1800: Remove set but not used variable 'fref' * clk-register-dt-node-better: clk: Use parent node pointer during registration if necessary
-
Yangbo Lu authored
This patch is to add hwaccel clocks information for ls1088a. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Link: https://lkml.kernel.org/r/20191216100111.17122-1-yangbo.lu@nxp.comSigned-off-by: Stephen Boyd <sboyd@kernel.org>
-
Wen He authored
Add clock driver for QorIQ LS1028A Display output interfaces(LCD, DPHY), as implemented in TSMC CLN28HPM PLL, this PLL supports the programmable integer division and range of the display output pixel clock's 27-594MHz. Signed-off-by: Wen He <wen.he_1@nxp.com> Signed-off-by: Michael Walle <michael@walle.cc> Link: https://lkml.kernel.org/r/20191213083402.35678-2-wen.he_1@nxp.comSigned-off-by: Stephen Boyd <sboyd@kernel.org>
-
Wen He authored
LS1028A has a clock domain PXLCLK0 used for provide pixel clocks to Display output interface. Add a YAML schema for this. Signed-off-by: Wen He <wen.he_1@nxp.com> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lkml.kernel.org/r/20191213083402.35678-1-wen.he_1@nxp.comSigned-off-by: Stephen Boyd <sboyd@kernel.org>
-
- 28 Jan, 2020 6 commits
-
-
Michael Walle authored
With this driver it is possible to use the BCLK pin of the SAI module as a generic clock output. This is esp. useful if you want to drive a clock to an audio codec. Because the output only allows integer divider values the audio codec needs an integrated PLL. Signed-off-by: Michael Walle <michael@walle.cc> Link: https://lkml.kernel.org/r/20200102231101.11834-3-michael@walle.ccSigned-off-by: Stephen Boyd <sboyd@kernel.org>
-
Michael Walle authored
Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lkml.kernel.org/r/20200102231101.11834-2-michael@walle.ccSigned-off-by: Stephen Boyd <sboyd@kernel.org>
-
Michael Walle authored
Add support for the new way of specifying the clock parents. Add the two new functions clk_hw_register_composite_pdata() clk_register_composite_pdata() to let the driver provide parent_data instead of the parent_names. Signed-off-by: Michael Walle <michael@walle.cc> Link: https://lkml.kernel.org/r/20200102231101.11834-1-michael@walle.ccSigned-off-by: Stephen Boyd <sboyd@kernel.org>
-
Bjorn Andersson authored
sc7180 was added to the end of the match table, sort the table. Fixes: eee28109 ("clk: qcom: clk-rpmh: Add support for RPMHCC for SC7180") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lkml.kernel.org/r/20200124175934.3937473-1-bjorn.andersson@linaro.orgSigned-off-by: Stephen Boyd <sboyd@kernel.org>
-
Dafna Hirschfeld authored
The last example in qcom,gcc.yaml set 'sleep' as the second value of 'clock-names'. According to the schema is should be 'sleep_clk'. Fix the example to conform the schema. This fixes a warning when validating the schema: "clock-names: ... is not valid under any of the given schemas" Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Link: https://lkml.kernel.org/r/20200122135741.12123-1-dafna.hirschfeld@collabora.comAcked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
Dafna Hirschfeld authored
Running `make dt_binging_check`, gives the error: DTC Documentation/devicetree/bindings/clock/qcom,gcc.example.dt.yaml Error: Documentation/devicetree/bindings/clock/qcom,gcc.example.dts:111.28-29 syntax error FATAL ERROR: Unable to parse input tree This is because the last example uses the macro RPM_SMD_XO_CLK_SRC which is defined in qcom,rpmcc.h but the include of this header is missing. Add the include to fix the error. Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Link: https://lkml.kernel.org/r/20200122134639.11735-1-dafna.hirschfeld@collabora.comAcked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
- 27 Jan, 2020 1 commit
-
-
Stephen Boyd authored
Merge tag 'for-5.6-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into clk-nvidia Pull Nvidia Tegra clk driver updates from Thierry Reding * tag 'for-5.6-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: clk: tegra20/30: Explicitly set parent clock for Video Decoder clk: tegra20/30: Don't pre-initialize displays parent clock clk: tegra: divider: Check UART's divider enable-bit state on rate's recalculation clk: tegra: clk-dfll: Remove call to pm_runtime_irq_safe() clk: tegra: Mark fuse clock as critical
-
- 23 Jan, 2020 6 commits
-
-
Tejas Patel authored
Existing clock divider functions is not checking for base of divider. So, if any clock divider is power of 2 then clock rate calculation will be wrong. Add support to calculate divider value for the clocks with CLK_DIVIDER_POWER_OF_TWO flag. Signed-off-by: Tejas Patel <tejas.patel@xilinx.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Link: https://lkml.kernel.org/r/1575527759-26452-7-git-send-email-rajan.vaja@xilinx.comSigned-off-by: Stephen Boyd <sboyd@kernel.org>
-
Rajan Vaja authored
zynqmp_clk_divider_round_rate() returns actual divider value after calculating from parent rate and desired rate, even though that rate is not supported by single divider of hardware. It is also possible that such divisor value can be achieved through 2 different dividers. As, Linux tries to set such divisor value(out of range) in single divider set divider is getting failed. Fix the same by computing best possible combination of two divisors which provides more accurate clock rate. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Tejas Patel <tejas.patel@xilinx.com> Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Link: https://lkml.kernel.org/r/1575527759-26452-6-git-send-email-rajan.vaja@xilinx.comSigned-off-by: Stephen Boyd <sboyd@kernel.org>
-
Rajan Vaja authored
To achieve best possible rate, maximum limit of divider is required while computation. Get maximum supported divisor from firmware. To maintain backward compatibility assign maximum possible value(0xFFFF) if query for max divisor is not successful. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Link: https://lkml.kernel.org/r/1575527759-26452-5-git-send-email-rajan.vaja@xilinx.comAcked-by: Michal Simek <michal.simek@xilinx.com> [sboyd@kernel.org: Remove else return and just return] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
Rajan Vaja authored
Warn user if clock is used by more than allowed devices. This check is done by firmware and returns respective error code. Upon receiving error code for excessive user, warn user for the same. This change is done to restrict VPLL use count. It is assumed that VPLL is used by one user only. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Link: https://lkml.kernel.org/r/1575527759-26452-4-git-send-email-rajan.vaja@xilinx.comAcked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
Rajan Vaja authored
Add Versal compatible string to support Versal binding. Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Link: https://lkml.kernel.org/r/1575527759-26452-3-git-send-email-rajan.vaja@xilinx.comSigned-off-by: Stephen Boyd <sboyd@kernel.org>
-
Rajan Vaja authored
Add documentation to describe Xilinx Versal clock driver bindings. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lkml.kernel.org/r/1575527759-26452-2-git-send-email-rajan.vaja@xilinx.comSigned-off-by: Stephen Boyd <sboyd@kernel.org>
-
- 22 Jan, 2020 3 commits
-
-
Stephen Boyd authored
Merge tag 'ti-clk-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into clk-ti Pull TI clk driver updates from Tero Kristo: - cam, vpe and sgx clock support for dra7 - fix gmac main clock for dra7 - aess clock support for omap5 - move dra7-atl clock header to correct location - fix hidden node name dependency on clkctrl clocks * tag 'ti-clk-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux: clk: ti: clkctrl: Fix hidden dependency to node name clk: ti: add clkctrl data dra7 sgx clk: ti: omap5: Add missing AESS clock clk: ti: dra7: fix parent for gmac_clkctrl clk: ti: dra7: add vpe clkctrl data clk: ti: dra7: add cam clkctrl data dt-bindings: clock: Move ti-dra7-atl.h to dt-bindings/clock
-
Stephen Boyd authored
Merge tag 'imx-clk-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into clk-imx Pull i.MX clk driver updates from Shawn Guo: - A series from Abel Vesa to do some trivial cleanups which will be helpful for i.MX clock driver switching to clk_hw based API - A series from Anson Huang to add i.MX8MP clock driver support - Disable non-functional divider between pll4_audio_div and pll4_post_div on imx6q - Fix watchdog2 clock name typo in imx7ulp clock driver - A couple of patches from Leonard Crestez to set CLK_GET_RATE_NOCACHE flag for DRAM related clocks on i.MX8M SoCs - Suppress bind attrs for i.MX8M clock driver to avoid the possibility of reloading the driver at runtime - Add a big comment in imx8qxp-lpcg driver to tell why devm_platform_ioremap_resource() shouldn't be used for the driver - A correction on i.MX8MN usb1_ctrl parent clock setting - A couple of trivial cleanup on clk-divider-gate driver - A series from Peng Fan to convert i.MX8M clock drivers to clk_hw based API * tag 'imx-clk-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (32 commits) clk: imx: Add support for i.MX8MP clock driver dt-bindings: imx: Add clock binding doc for i.MX8MP clk: imx: gate4: Switch imx_clk_gate4_flags() to clk_hw based API clk: imx: imx8mq: Switch to clk_hw based API clk: imx: imx8mm: Switch to clk_hw based API clk: imx: imx8mn: Switch to clk_hw based API clk: imx: Remove __init for imx_obtain_fixed_clk_hw() API clk: imx: gate3: Switch to clk_hw based API clk: imx: add hw API imx_clk_hw_mux2_flags clk: imx: add imx_unregister_hw_clocks clk: imx: clk-composite-8m: Switch to clk_hw based API clk: imx: clk-pll14xx: Switch to clk_hw based API clk: imx7up: Rename the clks to hws clk: imx: Rename the imx_clk_divider_gate to imply it's clk_hw based clk: imx: Rename the imx_clk_pfdv2 to imply it's clk_hw based clk: imx: Rename the imx_clk_pllv4 to imply it's clk_hw based clk: imx: Rename sccg and frac pll register to suggest clk_hw clk: imx: imx7ulp composite: Rename to show is clk_hw based clk: imx: pllv2: Switch to clk_hw based API clk: imx: pllv1: Switch to clk_hw based API ...
-
Stephen Boyd authored
Merge tag 'sunxi-clk-for-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-allwinner Pull Allwinner clk driver updates from Maxime Ripard: Our usual set of patches for sunxi, with a bunch of them required to enable the MBUS controller, and two patches to enable cpufreq on the A64. * tag 'sunxi-clk-for-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: clk: sunxi: a23/a33: Export the MIPI PLL clk: sunxi: a31: Export the MIPI PLL clk: sunxi-ng: a64: export CLK_CPUX clock for DVFS clk: sunxi-ng: add mux and pll notifiers for A64 CPU clock clk: sunxi-ng: r40: Export MBUS clock clk: sunxi: use of_device_get_match_data
-
- 20 Jan, 2020 7 commits
-
-
Tony Lindgren authored
We currently have a hidden dependency to the device tree node name for the clkctrl clocks. Instead of using standard node name like "clock", we must use "l4-per-clkctrl" type naming so the clock driver can find the associated clock domain. Further, if "clk" is specified for a clock node name, the driver sets TI_CLK_CLKCTRL_COMPAT flag that uses different logic for the clock name based on the parent node name for the all the clkctrl clocks for the SoC. If the clock node naming dependency is not understood, the related clockdomain is not found, or a wrong one can get used if a clock manager has multiple clock domains. As each clkctrl instance represents a single clock domain, let's allow using domain specific compatible names to specify the clock domain. This simplifies things and removes the hidden dependency to the node name. And then later on, after the node names have been standardized, we can drop the related code for parsing the node names. Let's also update the binding to use standard "clock" node naming instead of "clk" and add the missing description for reg. Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Tero Kristo <t-kristo@ti.com>
-
Tony Lindgren authored
This is similar to what we have for omap5 except the gpu_cm address is different, the mux clocks have one more source option, and there's no divider clock. Note that because of the current dts node name dependency for mapping to clock domain, we must still use "gpu-clkctrl@" naming instead of generic "clock@" naming for the node. And because of this, it's probably best to apply the dts node addition together along with the other clock changes. For accessing the GPU, we also need to configure the interconnect target module for GPU similar to what we have for omap5, I'll send that change separately. Cc: Benoit Parrot <bparrot@ti.com> Cc: "H. Nikolaus Schaller" <hns@goldelico.com> Cc: Robert Nelson <robertcnelson@gmail.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Tero Kristo <t-kristo@ti.com>
-
Tony Lindgren authored
Looks like we're missing AESS clock for omap5. This is similar to what omap4 has. Cc: H. Nikolaus Schaller <hns@goldelico.com> Cc: Matthijs van Duin <matthijsvanduin@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
-
Grygorii Strashko authored
The parent clk for gmac clk ctrl has to be gmac_main_clk (125MHz) instead of dpll_gmac_ck (1GHz). This is caused incorrect CPSW MDIO operation. Hence, fix it. Fixes: dffa9051 ('clk: ti: dra7: add new clkctrl data') Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
-
Benoit Parrot authored
Add clkctrl data for VPE. Signed-off-by: Benoit Parrot <bparrot@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Tero Kristo <t-kristo@ti.com>
-
Benoit Parrot authored
Add clkctrl data for CAM domain. Signed-off-by: Benoit Parrot <bparrot@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Tero Kristo <t-kristo@ti.com>
-
Peter Ujfalusi authored
Most of the clock related dt-binding header files are located in dt-bindings/clock folder. It would be good to keep all the similar header files at a single location. Suggested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Tero Kristo <t-kristo@ti.com>
-
- 17 Jan, 2020 1 commit
-
-
https://github.com/BayLibre/clk-mesonStephen Boyd authored
Pull Amlogic clk driver updates from Jerome Brunet: - Add meson8b DDR clock controller - Add input clocks to meson8b controllers - Fix meson8b mali clock update using the glitch free mux - Fix pll driver division by zero init * tag 'clk-meson-v5.6-1' of https://github.com/BayLibre/clk-meson: clk: clarify that clk_set_rate() does updates from top to bottom clk: meson: meson8b: make the CCF use the glitch-free mali mux clk: meson: pll: Fix by 0 division in __pll_params_to_rate() clk: meson: g12a: fix missing uart2 in regmap table clk: meson: meson8b: use of_clk_hw_register to register the clocks clk: meson: meson8b: don't register the XTAL clock when provided via OF clk: meson: meson8b: change references to the XTAL clock to use [fw_]name clk: meson: meson8b: use clk_hw_set_parent in the CPU clock notifier clk: meson: add a driver for the Meson8/8b/8m2 DDR clock controller dt-bindings: clock: meson8b: add the clock inputs dt-bindings: clock: add the Amlogic Meson8 DDR clock controller binding
-