- 22 May, 2013 39 commits
-
-
Amitkumar Karwar authored
There are some macros defined for multiport aggregation calculations. As we may need to add some more code to accomodate new chipsets, we will change them to inline functions. Also, use dynamic allocation for Rx buffer array. Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Amitkumar Karwar authored
They are not used in the code. Signed-off-by:
-
Amitkumar Karwar authored
As Multiple-Port Aggregation base address value is fixed, we can have a macro for it. Signed-off-by:
-
Amitkumar Karwar authored
This patch rearranges the code for better readability Signed-off-by:
Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by:
-
Amitkumar Karwar authored
Get rid of 'if else' usage by returning in 'if' block. This improves readability by removing indentations. Signed-off-by:
-
Amitkumar Karwar authored
Some u32 variables in sdio.c are used to store/pass u8 values. Replace them with u8 variables. Signed-off-by:
-
Amitkumar Karwar authored
Register addresses, firmware name and some macros are specific to a chip. They are stored in a new structure. Signed-off-by:
-
Amitkumar Karwar authored
Currently supported SDIO chipsets (SD87XX) have 16 ports. This change is a prerequisite for new chipset. Signed-off-by:
-
Amitkumar Karwar authored
User can provide a text file containing calibration data in hex format while loading mwifiex module. It will be downloaded to firmware. eg. insmod mwifiex.ko cal_data_cfg=cal_data.conf Signed-off-by:
-
Avinash Patil authored
We see this WARN_ON during PCIe unload: WARNING: at kernel/smp.c:382 smp_call_function_many+0x66/0x1e1() This happens because we are doing PCI iounmap operations while holding spinlock via spin_lock_irqsave(). Holding spinlock this way causes disabling IRQs and hence PCI iounmap shows warning on irqs_disabled() check. Use non-irq variant of spin_lock i.e. spin_lock() instead. Signed-off-by:
Avinash Patil <patila@marvell.com> Signed-off-by:
-
Avinash Patil authored
This patch adds cfg80211 del_station handler for mwifiex. If bss is not started or there are no stations in associated stations list, no action is taken. If argument received is null/broadcast mac, all stations in associated station list are deauthenticated. Patch also deletes related RxReorder stream and TxBA stream tables for related station. Signed-off-by:
-
Avinash Patil authored
During deleting a station entry from associated sta_list, we are supposed to delete entry only for this particular mac address. This patch is a bug fix wherein we were deleting all entries from list; fix this by removing list_for_each_entry_safe() call. Signed-off-by:
-
Bing Zhao authored
A full-channel scan is split to multiple scan commands in driver before they are sent to firmware. When each scan result is back the SSID entries are parsed and informed to cfg80211 directly. It's observed that sometimes userspace may initiate association as soon as the target AP is found. During the 4-way handshake firmware may go off-channel to scan the remaining channels. This causes the 4-way handshake to fail. Fix it by checking 'scan_block' flag and aborting the remaining scan in this case. 'scan_block' flag is set after association and before 4-way handshake. It gets cleared after 4-way handshake is completed. Tested-by:
Jason Abele <jabele@chromium.org> Signed-off-by:
-
Amitkumar Karwar authored
As the variable is used only for preparation of internal scan commands, we don't need to keep it allocated until the entire scan completes. We will define it as a local variable and free immediately after it's use. New flag 'scan_aborting' is added to handle race between mwifiex_close() and scan handler. Previously user_scan_cfg pointer used to take care of this. This patch fixes a memory leak in mwifiex_cfg80211_scan after running "iwlist mlan0 scan & sleep 1; rmmod mwifiex_sdio". Reported-by:
Daniel Drake <dsd@laptop.org> Tested-by:
-
Amitkumar Karwar authored
Return from scan delay timer routine if surprise_removed flag is true. Also, cancel the timer in unload path. This fixes a crash when scan delay timer accesses structures that have been freed already. Tested with "iwlist mlan0 scan & sleep 1; rmmod mwifiex_sdio" Reported-by:
-
Amitkumar Karwar authored
We have two different static routines with name mwifiex_free_adapter(). The routine in main.c actually frees the adapter structure. We will rename other routine in init.c to mwifiex_adapter_cleanup() to avoid confusion. Signed-off-by:
-
Rafał Miłecki authored
This is pretty much the same as rev 9, there are just 2 extra fields we know about, but are not used/stored yet anyway. Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Pass it as an argument to all functions. This is requires as newer SPROM revisions have different lengths. Signed-off-by:
-
Vladimir Kondratiev authored
Packet drop may be caused by various flows, like disconnect while Tx packets was queued; this should not lead to stopping of the Tx queue, or all Tx get stalled. Signed-off-by:
Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by:
-
Vladimir Kondratiev authored
- Introduce common code for Tx/Rx descriptor physical address set/parse - Fix endianness for address fields - consistent descriptor naming: '_d' for non-cached memory, 'd' for cached copy - wil_tx_desc_map now modify cached copy, no need for 'volatile' Signed-off-by:
-
Vladimir Kondratiev authored
Introduce NAPI for Rx and Tx completion. This fixes packet reordering that happens when Rx handled right in the IRQ: netif_rx puts packet in 'percpu' queue, then network stack fetches packets from 'percpu' queues for processing, with different pattern of queue switching. As result, network stack see packets in different order. This causes hard to understand TCP throughput degradation in about 30min Complete polling if only one packet was processed - this eliminates empty polls that would be otherwise done at the end of each burst Signed-off-by:
-
Vladimir Kondratiev authored
Trace the following: - WMI cmd/event - log events - interrupts - Tx/Rx Signed-off-by:
-
Vladimir Kondratiev authored
Move packet dump to the earliest location where it is known to have valid data. Signed-off-by:
-
Vladimir Kondratiev authored
If Rx descriptor contains garbage, it is possible to access memory beyond allocated buffer. Check this condition and drop Rx if reported length is unreasonable large Signed-off-by:
-
Vladimir Kondratiev authored
Hardware uses little endian for the Tx/Rx descriptors field 'length', do appropriate conversions Signed-off-by:
-
Thomas Pedersen authored
Chun-Yeow and Javier Lopez contributed these changes to make mesh mode use the more similar AP beaconing mode and queue parameters. Should improve PS performance, interface concurrency (AP modes can coexist), and beacon interval stability. AR9271 (ath9k_htc) mesh interfaces also need to be in AP operating mode. Signed-off-by:
Thomas Pedersen <thomas@cozybit.com> Signed-off-by:
-
Javier Cardona authored
Advertise support for management frame protection in hardware. Signed-off-by:
Javier Cardona <javier@cozybit.com> Signed-off-by:
-
Javier Cardona authored
More specifically, enable AP-style beaconing on mesh ifaces and change the hw capabilities to reflect mesh support. Coexistence with a virtual STA interface was tested as working fine. Signed-off-by:
-
Sujith Manoharan authored
This was added during the early conversion of ampdu_action to a sleeping callback. There is no need to do this - instead, use the normal mutex that is acquired for all callbacks. Signed-off-by:
Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by:
-
Sujith Manoharan authored
Signed-off-by:
-
Sujith Manoharan authored
This option has not been enabled by default in any distribution, has never been enabled in OpenWrt and no developer has asked for this information in a bug report. Dumping pages of random values doesn't help debugging, remove this option (along with the vmalloc() abuse). Signed-off-by:
-
Jakub Kicinski authored
All PCIe devices must support MSIs, make use of them. Signed-off-by:
Jakub Kicinski <kubakici@wp.pl> Acked-by:
Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by:
-
Gabor Juhos authored
Only do it after the queues are allocated. This will allow to use the 'rt2x00dev->bcn->limit' instead of 'rt2x00dev->ops->bcn->entry_num'. Signed-off-by:
Gabor Juhos <juhosg@openwrt.org> Acked-by:
Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by:
-
Gabor Juhos authored
The beacon data queue is initialized already when the rt2800_clear_beacon_register() function is called. Fetch the size of the TXWI descriptor from that instead of using the winfo_size field of the data queue descriptor. The two values are the same, and the use of the rt2x00dev->bcn->winfo_size value allows us to get rid of a superfluous pointer dereference. Signed-off-by:
-
Gabor Juhos authored
The RX data queue is initialized already when the rt2800_usb_enable_radio() function is called. Fetch the number of the queue entries from that instead of using the entry_num field of the data queue descriptor. The two values are the same, and the use of the rt2x00dev->rx->limit value allows us to get rid of a superfluous pointer dereference. Signed-off-by:
-
Gabor Juhos authored
The TX data queue is initialized already when the rt2800pci_txstatus_interrupt() function is called. Fetch the number of the queue entries from that instead of using the entry_num field of the data queue descriptor. The two values are the same, and the use of the rt2x00dev->tx->limit value allows us to get rid of a superfluous pointer dereference. Signed-off-by:
-
Gabor Juhos authored
The TX data queue is initialized already when the rt61pci_txdone() function is called. Fetch the number of the queue entries from that instead of using the entry_num field of the data queue descriptor. The two values are the same, and the use of the rt2x00dev->tx->limit value allows us to get rid of a superfluous pointer dereference. Signed-off-by:
-
Gabor Juhos authored
The TX data queue is initialized already when the rt2x00lib_probe_hw() function is called. Fetch the number of the queue entries from that instead of using the entry_num field of the data queue descriptor. The two values are the same, and the use of the rt2x00dev->tx->limit value allows us to get rid of a superfluous pointer dereference. Signed-off-by:
-
- 12 May, 2013 1 commit
-
-
Linus Torvalds authored
-
