Skip to content

L
linux
Switch branch/tag
  1. 24 Feb, 2016 5 commits
  3. 23 Feb, 2016 8 commits
    • David Turner's avatar
      ext4: Fix handling of extended tv_sec · c01b01f0
      David Turner authored 
      commit a4dad1ae upstream.

In ext4, the bottom two bits of {a,c,m}time_extra are used to extend
the {a,c,m}time fields, deferring the year 2038 problem to the year
2446.

When decoding these extended fields, for times whose bottom 32 bits
would represent a negative number, sign extension causes the 64-bit
extended timestamp to be negative as well, which is not what's
intended.  This patch corrects that issue, so that the only negative
{a,c,m}times are those between 1901 and 1970 (as per 32-bit signed
timestamps).

Some older kernels might have written pre-1970 dates with 1,1 in the
extra bits.  This patch treats those incorrectly-encoded dates as
pre-1970, instead of post-2311, until kernel 4.20 is released.
Hopefully by then e2fsck will have fixed up the bad data.

Also add a comment explaining the encoding of ext4's extra {a,c,m}time
bits.
Signed-off-by: default avatarDavid Turner <novalis@novalis.org>
Signed-off-by: default avatarTheodore Ts'o <tytso@mit.edu>
Reported-by: default avatarMark Harris <mh8928@yahoo.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=23732Signed-off-by: default avatarJiri Slaby <jslaby@suse.cz>
      c01b01f0
    • Mathias Nyman's avatar
      xhci: fix usb2 resume timing and races. · 26c8d821
      Mathias Nyman authored 
      commit f69115fd upstream.

According to USB 2 specs ports need to signal resume for at least 20ms,
in practice even longer, before moving to U0 state.
Both host and devices can initiate resume.

On device initiated resume, a port status interrupt with the port in resume
state in issued. The interrupt handler tags a resume_done[port]
timestamp with current time + USB_RESUME_TIMEOUT, and kick roothub timer.
Root hub timer requests for port status, finds the port in resume state,
checks if resume_done[port] timestamp passed, and set port to U0 state.

On host initiated resume, current code sets the port to resume state,
sleep 20ms, and finally sets the port to U0 state. This should also
be changed to work in a similar way as the device initiated resume, with
timestamp tagging, but that is not yet tested and will be a separate
fix later.

There are a few issues with this approach

1. A host initiated resume will also generate a resume event. The event
   handler will find the port in resume state, believe it's a device
   initiated resume, and act accordingly.

2. A port status request might cut the resume signalling short if a
   get_port_status request is handled during the host resume signalling.
   The port will be found in resume state. The timestamp is not set leading
   to time_after_eq(jiffies, timestamp) returning true, as timestamp = 0.
   get_port_status will proceed with moving the port to U0.

3. If an error, or anything else happens to the port during device
   initiated resume signalling it will leave all the device resume
   parameters hanging uncleared, preventing further suspend, returning
   -EBUSY, and cause the pm thread to busyloop trying to enter suspend.

Fix this by using the existing resuming_ports bitfield to indicate that
resume signalling timing is taken care of.
Check if the resume_done[port] is set before using it for timestamp
comparison, and also clear out any resume signalling related variables
if port is not in U0 or Resume state

This issue was discovered when a PM thread busylooped, trying to runtime
suspend the xhci USB 2 roothub on a Dell XPS
Reported-by: default avatarDaniel J Blueman <daniel@quora.org>
Tested-by: default avatarDaniel J Blueman <daniel@quora.org>
Signed-off-by: default avatarMathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: default avatarJiri Slaby <jslaby@suse.cz>
      26c8d821
    • Peter Hurley's avatar
      tty: Fix unsafe ldisc reference via ioctl(TIOCGETD) · 4e6d2e76
      Peter Hurley authored 
      commit 5c17c861 upstream.

ioctl(TIOCGETD) retrieves the line discipline id directly from the
ldisc because the line discipline id (c_line) in termios is untrustworthy;
userspace may have set termios via ioctl(TCSETS*) without actually
changing the line discipline via ioctl(TIOCSETD).

However, directly accessing the current ldisc via tty->ldisc is
unsafe; the ldisc ptr dereferenced may be stale if the line discipline
is changing via ioctl(TIOCSETD) or hangup.

Wait for the line discipline reference (just like read() or write())
to retrieve the "current" line discipline id.
Signed-off-by: default avatarPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: default avatarJiri Slaby <jslaby@suse.cz>
      4e6d2e76
    • Peter Hurley's avatar
      tty: Fix GPF in flush_to_ldisc() · e13eaeb0
      Peter Hurley authored 
      commit 9ce119f3 upstream.

A line discipline which does not define a receive_buf() method can
can cause a GPF if data is ever received [1]. Oddly, this was known
to the author of n_tracesink in 2011, but never fixed.

[1] GPF report
    BUG: unable to handle kernel NULL pointer dereference at           (null)
    IP: [<          (null)>]           (null)
    PGD 3752d067 PUD 37a7b067 PMD 0
    Oops: 0010 [#1] SMP KASAN
    Modules linked in:
    CPU: 2 PID: 148 Comm: kworker/u10:2 Not tainted 4.4.0-rc2+ #51
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
    Workqueue: events_unbound flush_to_ldisc
    task: ffff88006da94440 ti: ffff88006db60000 task.ti: ffff88006db60000
    RIP: 0010:[<0000000000000000>]  [<          (null)>]           (null)
    RSP: 0018:ffff88006db67b50  EFLAGS: 00010246
    RAX: 0000000000000102 RBX: ffff88003ab32f88 RCX: 0000000000000102
    RDX: 0000000000000000 RSI: ffff88003ab330a6 RDI: ffff88003aabd388
    RBP: ffff88006db67c48 R08: ffff88003ab32f9c R09: ffff88003ab31fb0
    R10: ffff88003ab32fa8 R11: 0000000000000000 R12: dffffc0000000000
    R13: ffff88006db67c20 R14: ffffffff863df820 R15: ffff88003ab31fb8
    FS:  0000000000000000(0000) GS:ffff88006dc00000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
    CR2: 0000000000000000 CR3: 0000000037938000 CR4: 00000000000006e0
    Stack:
     ffffffff829f46f1 ffff88006da94bf8 ffff88006da94bf8 0000000000000000
     ffff88003ab31fb0 ffff88003aabd438 ffff88003ab31ff8 ffff88006430fd90
     ffff88003ab32f9c ffffed0007557a87 1ffff1000db6cf78 ffff88003ab32078
    Call Trace:
     [<ffffffff8127cf91>] process_one_work+0x8f1/0x17a0 kernel/workqueue.c:2030
     [<ffffffff8127df14>] worker_thread+0xd4/0x1180 kernel/workqueue.c:2162
     [<ffffffff8128faaf>] kthread+0x1cf/0x270 drivers/block/aoe/aoecmd.c:1302
     [<ffffffff852a7c2f>] ret_from_fork+0x3f/0x70 arch/x86/entry/entry_64.S:468
    Code:  Bad RIP value.
    RIP  [<          (null)>]           (null)
     RSP <ffff88006db67b50>
    CR2: 0000000000000000
    ---[ end trace a587f8947e54d6ea ]---
Reported-by: default avatarDmitry Vyukov <dvyukov@google.com>
Signed-off-by: default avatarPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: default avatarJiri Slaby <jslaby@suse.cz>
      e13eaeb0
    • John Ernberg's avatar
      USB: option: fix Cinterion AHxx enumeration · ec0657a0
      John Ernberg authored 
      commit 4152b387 upstream.

In certain kernel configurations where the cdc_ether and option drivers
are compiled as modules there can occur a race condition in enumeration.
This causes the option driver to enumerate the ethernet(wwan) interface
as usb-serial interfaces.

usb-devices output for the modem:
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  5 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1e2d ProdID=0055 Rev=00.00
S:  Manufacturer=Cinterion
S:  Product=AHx
C:  #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=10mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
I:  If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
Signed-off-by: default avatarJohn Ernberg <john.ernberg@actia.se>
Fixes: 1941138e ("USB: added support for Cinterion's products...")
Signed-off-by: default avatarJohan Hovold <johan@kernel.org>
Signed-off-by: default avatarJiri Slaby <jslaby@suse.cz>
      ec0657a0
    • Daniele Palmas's avatar
      USB: serial: option: Adding support for Telit LE922 · 0fa3bb0d
      Daniele Palmas authored 
      commit ff4e2494 upstream.

This patch adds support for two PIDs of LE922.
Signed-off-by: default avatarDaniele Palmas <dnlplm@gmail.com>
Signed-off-by: default avatarJohan Hovold <johan@kernel.org>
Signed-off-by: default avatarJiri Slaby <jslaby@suse.cz>
      0fa3bb0d
    • Peter Dedecker's avatar
      USB: cp210x: add ID for IAI USB to RS485 adaptor · 80e3397c
      Peter Dedecker authored 
      commit f487c54d upstream.

Added the USB serial console device ID for IAI Corp. RCB-CV-USB
USB to RS485 adaptor.
Signed-off-by: default avatarPeter Dedecker <peter.dedecker@hotmail.com>
Signed-off-by: default avatarJohan Hovold <johan@kernel.org>
Signed-off-by: default avatarJiri Slaby <jslaby@suse.cz>
      80e3397c
    • Greg Kroah-Hartman's avatar
      USB: serial: ftdi_sio: add support for Yaesu SCU-18 cable · 1c2b780a
      Greg Kroah-Hartman authored 
      commit e03cdf22 upstream.

Harald Linden reports that the ftdi_sio driver works properly for the
Yaesu SCU-18 cable if the device ids are added to the driver.  So let's
add them.
Reported-by: default avatarHarald Linden <harald.linden@7183.org>
Signed-off-by: default avatarJiri Slaby <jslaby@suse.cz>
Signed-off-by: default avatarJohan Hovold <johan@kernel.org>
Signed-off-by: default avatarJiri Slaby <jslaby@suse.cz>
      1c2b780a
  5. 15 Feb, 2016 27 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7