set_saved_sp reads Context register. Avoid reading stale value from
earlier incomplete write.

Issue found and fixed for head.S by Chris Dearman <chris@mips.com>.
Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Some newer Octeon chips have registers that allow lockless operation of
the interrupt controller.  Take advantage of them.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Since the locks are used from interrupt context we need the
irqsave/irqrestore versions of the locking functions.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Chris Dearman (chris@mips.com)
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This patch ensures that the sign bit is always updated for NaN operands.
Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Based on original patch by Chris Dearman <chris@mips.com>.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This fixes the remaining problems introduced by
f1974653 (incorrect access length &
byteswapping in bigendian mode)
Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

On an SMP system with cache aliases, the following sequence of events may
happen:

1) copy_user_highpage() runs on CPU0, invoking kmap_coherent() to create a
   temporary mapping in the fixmap region
2) copy_page() starts on CPU0
3) CPU1 sends CPU0 an IPI asking CPU0 to run local_r4k_flush_cache_page()
4) CPU0 takes the interrupt, interrupting copy_page()
5) local_r4k_flush_cache_page() on CPU0 calls kmap_coherent() again
6) The second invocation of kmap_coherent() on CPU0 tries to use the
   same fixmap virtual address that was being used by copy_user_highpage()
7) CPU0 throws a machine check exception for the TLB address conflict

Fixed by creating an extra set of fixmap entries for use in interrupt
handlers.  This prevents fixmap VA conflicts between copy_user_highpage()
running in user context, and local_r4k_flush_cache_page() invoked from an
SMP IPI.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This patch checks if the watchdog enable bit is set in the DCL register
meaning that the hardware watchdog actually works and if so, register the
ar7_wdt platform_device.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This patch prepares the board code to register a bcm63xx_wdt
platform_device that we are going to use in a subsequent patch.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This patch removes the calls to bcm63xx_uart_register in board_bcm963xx.c
and make bcm63xx_uart_register an initfunc.  Allows us to remove
bcm63xx_dev_uart.h which was there to make checkpatch.pl happy.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This patch fixes the following warning, which becomes an error due to
-Werror to be turned on:
  CC      arch/mips/alchemy/common/gpiolib-au1000.o
cc1: warnings being treated as errors
arch/mips/alchemy/common/gpiolib-au1000.c: In function 'au1100_gpio2_to_irq':
/home/florian/dev/kernel/linux-queue/arch/mips/include/asm/mach-au1x00/gpio-au1000.h:107: warning: control reaches end of non-void function
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This patch fixes a lockup on BCM6345 where setting the PLL soft reset bit
will also lock the other blocks including UART.  Instead of setting only
the PLL soft reset bit in the software reset register, set this bit but do
not touch the others.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Error was introduced by commit 0385d1f3d394c6814be0b165c153fc3fc254469a.
Signed-off-by: Ralf Roesch <ralf.roesch@rw-gmbh.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

As the commit 3ee4c147 shows, we need to "Add IRQF_TIMER flag for timer
interrupts", Atsushi Nemoto have reported that some other timer interrupts
should be considered, Here it is.
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

An o32 aplication passes a 64-bit value in a pair of registers; a 64-bit
kernel expects a 64-bit argument in a single register.
Signed-off-by: Chen Jie <chenj@lemote.com>
Signed-off-by: Hu Hongbing <huhb@lemote.com>
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Reported-by: Josip Rodin <joy@entuzijast.net>

Along the lines of d6c585a4, add IRQF_TIMER
flag for all timer interrupts  This ensures that timer interrupts won't be
disabled on suspend and not threaded for PREEMPT_RT.
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

That code is executed with irq disabled already, so, remove the redundant
local_irq_disable() here.
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Broken by 182a85f8.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

We've silently been relying on the hardware chopping off excess, reserved
ASID bits for no better reason that it saving an instruction.  Because we
already have:

#define cpu_asid(cpu, mm)       (cpu_context((cpu), (mm)) & ASID_MASK)

in <asm/mmu_context.h>.

We can use a cleanup to avoid writing non-zero bits into the reserved
entryhi bits.  This avoid triggering some debugging assertion in the
Cavium simulator.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Some firmware may pass well over 256 bytes these days.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  Staging: fix wireless drivers depends
  Staging: wireless drivers Kconfig change
  Staging: android: mark subsystem as broken
  Staging: remove stlc45xx driver
  Staging: rtl8187se/rtl8192e/rtl8192su: allow module unload
  Staging: vt6656: fix the memory free bug in vntwusb_disconnect()
  Staging: Panel: prevent driver from calling misc_deregister twice on same ressource
  Staging: hv: fix oops in vmbus - missing #include
  Staging: hv: fix oops in vmbus - netvsc list_head
  Staging: hv: fix oops in vmbus - udev events
  Staging: hv: Fix vmbus load hang caused by faulty data packing
  Staging: hv: Fix null pointer error after vmbus loading
  Staging: hv TODO patches

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: fsl_udc_core: Fix kernel oops on module removal
  USB: option: TLAYTECH TUE800 support
  USB: r8a66597-hcd: fix cannot detect a device when uses_new_polling is set
  USB: serial: sierra driver autopm fixes
  USB: serial: sierra driver send_setup() autopm fix
  USB: rndis_host: debug info clobbered before it is logged

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
  tty: Mark generic_serial users as BROKEN

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
  Documentation: ABI: /sys/devices/system/cpu/cpu#/node
  Documentation: ABI: /sys/devices/system/cpu/cpuidle/
  Documentation: ABI: /sys/devices/system/cpu/sched_[mc|smt]_power_savings
  Documentation: ABI: /sys/devices/system/cpu/cpu#/ topology files
  Documentation: ABI: /sys/devices/system/cpu/ topology files
  Documentation: ABI: document /sys/devices/system/cpu/
  Documentation: ABI: rename sysfs-devices-cache_disable properly
  Driver core: allow certain drivers prohibit bind/unbind via sysfs
  Driver core: fix driver_register() return value

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] smp: fix sigp sense handling
  [S390] smp: fix sigp stop handling
  [S390] cputime: fix overflow on 31 bit systems
  [S390] call home: fix string length handling
  [S390] call home: fix error handling in init function
  [S390] smp: fix prefix handling of offlined cpus
  [S390] s/r: cmm resume fix
  [S390] call home: fix local buffer usage in proc handler

* 'for-linus' of git://git.kernel.org/pub/scm/fs/xfs/xfs:
  xfs: fix xfs_quota remove error
  xfs: free temporary cursor in xfs_dialloc

* 'for-linus' of git://neil.brown.name/md:
  async_tx: fix asynchronous raid6 recovery for ddf layouts
  async_pq: rename scribble page
  async_pq: kill a stray dma_map() call and other cleanups
  md/raid6: kill a gcc-4.0.1 'uninitialized variable' warning
  raid6/async_tx: handle holes in block list in async_syndrome_val
  md/async: don't pass a memory pointer as a page pointer.
  md: Fix handling of raid5 array which is being reshaped to fewer devices.
  md: fix problems with RAID6 calculations for DDF.
  md/raid456: downlevel multicore operations to raid_run_ops
  md: drivers/md/unroll.pl replaced with awk analog
  md: remove clumsy usage of do_sync_mapping_range from bitmap code
  md: raid1/raid10: handle allocation errors during array setup.
  md/raid5: initialize conf->device_lock earlier
  md/raid1/raid10: add a cond_resched
  Revert "md: do not progress the resync process if the stripe was blocked"

Commit ef7562b7 ("dpt_i2o: Fix up
copy*user") had a silly typo: EINVAL should be -EINVAL.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: stable@kernel.org
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>