Convert from pragma to __packed
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch.pl issue:

CHECK: usleep_range is preferred over udelay; see
       Documentation/timers/timers-howto.txt

Replace the udelay() with usleep_range() with a reasonable upper limit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As suggested by checkpatch.pl, use the BIT macro to define the
register bits.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reformat the multi-line comments in the kernel CodingStyle. And
refactor them to follow the normal format for comedi drivers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change the MODULE_DESCRIPTION to something more ueeful than the
generic "Comedi low-level driver".
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace the disabled code in dt3k_dio_config() with a comment in case
it's actually needed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the unnecessary 'len_chanlist' initialization. This member is
only used by subdevices that support async commands.

For aesthetics, reorder the initialization a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the unnecessary 'len_chanlist' initialization. This member is
only used by subdevices that support async commands.

For aesthetics, reorder the initialization a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, rename this subdevice (*insn_read) function to follow
the normal naming in comedi drivers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

According to the boardinfo, the dt3002 board does not have analog outputs.
The rest of the board have two 12-bit analog output channels.

Replace the 'dachan' and 'dabits' members of the boardinfo with a bit-
field flag 'has_ao'. Use the new member to conditionally initialize
the analog output subdevice.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All the board supported by this driver have analog inputs. The input
resolution is either 12-bit or 16-bit.

Replace the 'adbits' member of the boardinfo with a bit-field flag
'ai_is_16bits' and just set if for the 16-bit boards.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This subdevice is not allocated or defined in the driver. Remove the
disabled subdevice initialization.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move the remaining defines and prefix them with 'DPR_' for consistency.

Define a macro to set the analog input trigger bits to fix the
checkpatch.pl issues about:

CHECK: spaces preferred around that '<<' (ctx:VxV)
CHECK: Prefer using the BIT macro
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, rename these defines so they have association
with the register. Move them closer to the register define and
use the BIT macro to define them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, rename these defines to avoid any confusion with the
similar comedi defines. Move them closer to the register they are
associated with.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, rename these defines so they are associated with
the register. Move the defines closer to the register define.

Define some macros for the "completion" and "cmd" bits.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename these CamelCase defines and fix the checkpatch.pl issues:

CHECK: Avoid CamelCase: <DPR_{various}>
CHECK: spaces preferred around that '*' (ctx:VxV)
CHECK: spaces preferred around that '+' (ctx:VxV)

For aesthetics, move the defines to after the includes.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reformat the multi-line comments in the kernel CodingStyle.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename this CamelCase function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As suggested by checkpatch.pl, use the BIT macro to define the
register bits.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add some comments to the private data tp quiet the checkpatch.pl
issue about:

CHECK: spinlock_t definition without comment
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As suggested by checkpatch.pl, use the BIT macro to define the
register bits.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change the MODULE_DESCRIPTION to something more useful than the
generic "Comedi low-level driver".
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, use the helper function to handle the munging of the
analog output data from offset binary to 2's complement and the analog
input data from 2's complement to offset binary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As suggested by checkpatch.pl, use the BIT macro to define the
register bits.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reword the block comments to fix the checkpatch.pl issues about:

WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line

For consistency, also reword the previous comments.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename this CamelCase define.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reformat the multi-line comment in the kernel CodingStyle.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change the MODULE_DESCRIPTION to something more useful than the
generic "Comedi low-level driver".
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The icp_multi_reset() function currnelt does the following during the
(*auto_attach) and (*detach) of this driver:

  1) disables all interrupts and clears any pending requests
  2) resets the analog output channels to 0V (0..5V range)
  3) sets all digital output channels to 0

Interrupts are not used by this driver so the disable/clear when
detaching is not necessary.

Depending on the use, reseting the analog and digital outputs when the
driver is detached might not be desireable.

Remove the board reset during the (*detach) and use comedi_pci_detach()
directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, add some whitespace to the subdevice initialization.

Remove the unnecessary initialization of the 'len_chanlist' for each
subdevice. That member is only used by subdevices that support async
commands.

Also, remove the initialzation of the dev->read_subdev. That member
is also only used for async command support.

Rename some of the subdevice functions to follow the normal format
used in comedi drivers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The support functions for this subdevice are not complete. Since the
counter is the last subdevice just remove it and it's allocation.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reword the block comment to fix a CodingStyle issue.

For aesthetics, also rename the icp_multi_ao_eoc() function. It's testing
for the analog output to be 'ready' not for an 'end-of-conversion'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This private data member isn't really needed. The two functions
that use it, icp_multi_ao_insn_write() and icp_multi_reset(), mask
any previous value before setting the bits. The masking just clears
the variable.

Refactor the code to not use the private data member. This also
removes the need for the private data so remove it's allocation
during the attach.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This function would only be needed in the driver supported async
commands. It's #if 0'ed out anyway so just remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver does not use interrupts and all the interrupt source are
disabled by icp_multi_reset() when the board is first attached.

Remove the unnecessary, and useless, disable and clearing of interrupts
in the analog input and output (*insn_read) and (*insn_write) functions.

This also removes the need for the private data members 'IntEnable' and
'IntStatus'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The interrupt handler in this driver doesn't do anything other than
read the interrupt status register. Since I can't locate a datasheet
for the board, remove the useless interrupt support code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This function is only called in one place and the 'n_chan' parameter
is always 1. This makes the for() loop a bit silly.

Absorb the function into the caller and simplify the code. This also
removes the need for the private data member 'AdcCmdStatus'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These members are either not used at all or they are set but never
used. Just remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This comment doesn't add any value to the code. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>