We need to explicitly mark words 85-87 as valid ones since
firmware doesn't do it.

This should fix support for LBA48 and FLUSH CACHE [EXT] command
which stopped working after we applied more strict checking of
identify words in:

	commit 942dcd85
	("ide: idedisk_supports_lba48() -> ata_id_lba48_enabled()")

and

	commit 4b58f17d
	("ide: ide_id_has_flush_cache() -> ata_id_flush_enabled()")
Reported-and-tested-by: "Trevor Hemsley" <trevor.hemsley@ntlworld.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This patch adds the PCI Device ID 0xc409 to the PCI ID table of via82cxxx.c,
as well as the 0x8409 south bridge ID.

This is required to make the IDE driver work on the VX855/VX875 integrated
chipset.
Signed-off-by: Harald Welte <HaraldWelte@viatech.com>
Cc: Joseph Chan <JosephChan@via.com.tw>
Cc: Bruce Chang <BruceChang@via.com.tw>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* change 'hwif' argument to 'drive'
* report an error on timeout
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Nowadays we (almost) always store the currently executing command
in hwif->cmd so we can use it for the failed opcode reporting.

Cc: Martin Lottermoser <Martin.Lottermoser@t-online.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Fixes "<3>" in error messages like this one:

hdc: cdrom_decode_status: error=0x40 <3>{ LastFailedSense=0x04 }
Reported-by: Martin Lottermoser <Martin.Lottermoser@t-online.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

On Tuesday 19 May 2009 20:29:28 Martin Lottermoser wrote:

>   hdc: cdrom_decode_status: error=0x40 <3>{ LastFailedSense=0x04 }
>   ide: failed opcode was: unknown
>   hdc: DMA disabled
>   ------------[ cut here ]------------
>   kernel BUG at drivers/ide/ide-io.c:872!

It is possible for ide-cd to ignore ide_error()'s return value under
some circumstances.  Workaround it in ide_intr() and ide_timer_expiry()
by checking if there is a device/port reset pending currently.

Fixes bug #13345:

	http://bugzilla.kernel.org/show_bug.cgi?id=13345Reported-by: Martin Lottermoser <Martin.Lottermoser@t-online.de>
Reported-and-tested-by: Modestas Vainius <modestas@vainius.eu>
Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Since 2.6.26 we support UDMA66 on ATAPI devices requiring IVB quirk:

  commit 8588a2b7
  ("ide: add SH-S202J to ivb_list[]")

We also later added support for more such devices in:

  commit e97564f3
  ("ide: More TSST drives with broken cable detection")

and in:

  commit 3ced5c49
  ("ide: add TSSTcorp CDDVDW SH-S202H to ivb_list[]")

It turns out that such devices lack cable detection altogether
(which in turn results in incorrect detection of 40-wire cables
by our current cable detection strategy) so always handle them
by trusting host-side cable detection only.

v2:
Model detection fixup from Martin.
Reported-and-tested-by: Martin Lottermoser <Martin.Lottermoser@t-online.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

The Sony TZ90 needs the cable type hardcoding. See bug #12734
Signed-off-by: Alan Cox <alan@linux.intel.com>
Reported-by: Jonathan E. Snow <jesnow@uh.edu>
[bart: port it from ata_piix to piix and give reporter the proper credit]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

The second IDE channel of version 6 PCB is not being registered anymore since
the commit 48c3c107 (ide: add struct ide_host
(take 3)).
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Impact: fix an oops which always triggers

ide_tape_issue_pc() assumed drive->pc isn't NULL on invocation when
checking for back-to-back request sense issues but drive->pc can be
NULL and even when it's not NULL, it's not safe to dereference it once
the previous command is complete because pc could have been freed or
was on stack.  Kill back-to-back REQUEST_SENSE detection.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Original patch (dfa4411c) was buggy.
This is a more proper fix which introduces blk_rq_quiet() macro
alleviating the need for dumb, too short caching variables.

Thanks to Helge Deller and Bart for debugging this.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Reported-and-tested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

By a popular demand quilt tree was replaced by a git one.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Remove superfluous commas and add missing whitespaces.
Noticed-by: Joe Perches <joe@perches.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Bugfixes noted by checking the code against the controller
documentation (TI document number SPRUE21):

 - Remove declarations for eight non-existent registers (!);
   and remove accesses to two of them.

 - Remove access to various non-existent bitfields in some of
   the registers which *do* exist (those fields must-be-zero).

 - Provide comment to replace bogus reset logic (removed above,
   it relied on non-existent bitfields).  Resets require GPIO
   help; this driver doesn't currently know about that.

With some minor cleanup:  relocate a comment, avoid an extra
lookup of the PIO timings.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

On Tuesday 14 April 2009 20:31:21 Subrata Modak wrote:
> Observed the following build error:
> ---
> CC      drivers/macintosh/mediabay.o
> In file included from drivers/macintosh/mediabay.c:21:
> include/linux/ide.h:605: error: field ‘request_sense_rq’ has incomplete
> type
> make[2]: *** [drivers/macintosh/mediabay.o] Error 1
> make[1]: *** [drivers/macintosh] Error 2
> make: *** [drivers] Error 2
> ---

mediabay shouldn't include <linux/ide.h> unconditionally so
remove the superfluous include from mediabay.c (<asm/mediabay.h>
will pull <linux/ide.h> in for CONFIG_BLK_DEV_IDE_PMAC=y).
Reported-by: Subrata Modak <subrata@linux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

My laptop (Acer Travelmate 660) always cuts the power when rebooting
which causes the disk to emergency-park it's head.

Add a dmi check to stop disk as for shutdown on this laptop.
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

With 2.6.30-rc2 I face a kernel crash on the 32bit hppa architecture 
due to ide-cd when udev creates the device nodes at startup:

Kernel Fault: Code=26 regs=8ed34c40 (Addr=00000024)
IASQ: 00000000 00000000 IAOQ: 1034b5ac 1034b5b0
 IIR: 4ab30048    ISR: 00000000  IOR: 00000024
 CPU:        0   CR30: 8ed34000 CR31: ffff55ff
 ORIG_R28: 00000000
 IAOQ[0]: ide_complete_rq+0x2c/0x70
 IAOQ[1]: ide_complete_rq+0x30/0x70
 RP(r2): cdrom_newpc_intr+0x178/0x46c
Backtrace:
 [<1035c608>] cdrom_newpc_intr+0x178/0x46c
 [<1034c494>] ide_intr+0x1b0/0x214
 [<1016d284>] handle_IRQ_event+0x70/0x150
 [<1016d4b0>] __do_IRQ+0x14c/0x1cc
 [<102f7864>] superio_interrupt+0x88/0xbc
 [<1016d284>] handle_IRQ_event+0x70/0x150
 [<1016d4b0>] __do_IRQ+0x14c/0x1cc
 [<10112efc>] do_cpu_irq_mask+0x9c/0xd0
 [<10116068>] intr_return+0x0/0x4

This crash seems to happen due to an uninitialized variable "rc".
The compiler even warns about that:
  CC      drivers/ide/ide-cd.o                                                         
/mnt/sda4/home/cvs/parisc/git-kernel/linus-linux-2.6/drivers/ide/ide-cd.c: In function `cdrom_newpc_intr':
/mnt/sda4/home/cvs/parisc/git-kernel/linus-linux-2.6/drivers/ide/ide-cd.c:612: warning: `rc' might be used uninitialized in this function

After applying the trivial patch below, which just initializes 
the variable to zero, the kernel doesn't crash any longer:

Starting the hotplug events dispatcher: udevd.
Synthesizing the initial hotplug events...
hda: command error: status=0x51 { DriveReady SeekComplete Error }
hda: command error: error=0x54 <3>{ AbortedCommand LastFailedSense=0x05 }
ide: failed opcode was: unknown
done.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Borislav Petkov <petkovbb@gmail.com>
Cc: Linus <torvalds@linux-foundation.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Fix UDMA throughput bug:  tCYC averages t2CYCTYP/2, but the code
previously assumed it was the same as t2CYCTYP.  (That is, it was
using just one clock edge, not both.)  Move the table's type
declaration so it's adjacent to the table, making it more clear
what those numbers mean.

On one system this change increased throughput by almost 4x: UDMA/66
sometimes topped 23 MB/sec (on a drive known to do much better).  On
another system it was around a 10% win (UDMA/66 up to 7+ MB/sec).

The difference might be caused by the ratio between memory and IDE
clocks.  In the system with large speedup, this was exactly 2 (as a
workaround for a rev 1.1 silicon bug).  The other system used a more
standard ratio of 1.63 (and rev 2.1 silicon) ... clock domain synch
might have some issues, they're not unheard-of.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

The driver somehow got merged with the initializer for the dma_sff_read_status()
method missing which caused kernel panic on bootup.

This should fix the kernel.org bug #13026...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Reported-by: Arnd Hannemann <hannemann@nets.rwth-aachen.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Freeing non-slab objects is bad and results in an oops.  Fix it.
Reported-and-tested-by: Andrew Price <andy@andrewprice.me.uk>
Cc: Theodore Tso <tytso@mit.edu>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Remove uneeded void casts
Signed-off-by: Jack Stone <jwjstone@fastmail.fm>
Cc: jeff@garzik.org
Cc: kernel-janitors@vger.kernel.org
Cc: Jack Stone <jwjstone@fastmail.fm>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Use ATA_DMA_* constants instead of the bare numbers for the BMIDE register bits.
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

The big driver change in 2.4.19-rc1 introduced a regression for many HPT370[A]
chips -- DMA stopped to work completely, only causing endless timeouts...

The culprit has been identified (at last!): it turned to be the code resetting
the DMA state machine before each transfer. Stop doing it now as this counter-
measure has clearly caused more harm than good.

This should fix the kernel.org bug #7703.
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [libata] fix build error on drivers/ata/pata_legacy.c
  pata_via: Cache and rewrite the device bit
  sata_mv: workaround for multi_count errata sata24
  sata_mv: tidy up qc->tf usage in qc_prep() functions

fix those errors:

drivers/ata/pata_legacy.c: In function ‘pdc_data_xfer_vlb’:
drivers/ata/pata_legacy.c:289: error: ‘ap’ undeclared (first use in this function)
drivers/ata/pata_legacy.c:289: error: (Each undeclared identifier is reported only once
drivers/ata/pata_legacy.c:289: error: for each function it appears in.)
drivers/ata/pata_legacy.c: At top level:
drivers/ata/pata_legacy.c:869: error: ‘ATA_PFLAG_PIO32_CHANGE’ undeclared here (not in a
+function)
make[2]: *** [drivers/ata/pata_legacy.o] Error 1
make[1]: *** [drivers/ata] Error 2
Signed-off-by: Zhenwen Xu <helight.xu@gmail.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Some VIA chipsets will reset the DEV bit after IEN changes on ctl. Our
optimised write path avoids doing this but we need to remove the
optimisation on these devices.

[Identified and some original patches proposed by Josehn Chan @ VIA but
discussion then all ground to a halt so given a test case I dug it back out]

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk
Tested-by: Christoph Bisping (bug #13086)
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Workaround for errata SATA#24 in sata_mv.
This errata affects WRITE_MULTI* commands when
the device multi_count produces a DRQ block size >= 4Kbytes.

We work around it here by converting such operations
into ordinary PIO_WRITEs instead.

Note that this might result in a PIO FUA write unavoidably being converted
into a non-FUA write.  In practice, any system using FUA is also going to be
using DMA rather than PIO, so this shouldn't affect anyone in the real world.
Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Tidy up qc->tf accesses in the mv_qc_prep() functions.
Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (43 commits)
  staging: slicoss: update README
  otus/zdusb.c: additional USB idnetifier
  Staging: go7007: fix build issues
  Staging: sxg: Fix leaks and checksum errors in transmit code path
  Staging: sxg: Fix sleep in atomic context warning while loading driver
  Staging: sxg: Use correct queue_id for transmitting non-TCP packets
  Staging: sxg: Fire watchdog timer at end of open routine to change the link
  Staging: Pohmelfs: Add load balancing between network states with the same priority.
  Staging: Pohmelfs: Added IO permissions and priorities.
  Staging: Pohmelfs: Added ->show_stats() callback.
  Staging: Pohmelfs: Drop ftrans debugging code.
  Staging: Pohmelfs: Use wait_on_page_timeout when waiting for remote directory sync instead of hardcoded 25 seconds.
  Staging: Pohmelfs: Reduce debugging noise about non-existing objects.
  Staging: Pohmelfs: Sync fs before killing it, since dentry cache is shrunk before writeback is invoked via generic_shutdown_super()
  Staging: Pohmelfs: Extend remount option.
  Staging: Pohmelfs: Set NETFS_INODE_REMOTE_SYNCED and clear NETFS_INODE_OWNED bits in the root inode.
  Staging: Pohmelfs: Added 'need_lock' variable into debug print.
  Staging: Pohmelfs: Disable read lock in pohmelfs_getattr().
  Staging: Pohmelfs: Move parent lock to the place where we really have to send a lookup request to the server.
  Staging: pohmelfs: Populate dentry cache when receiving the new readdir entry.
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
  UIO: fix specific device driver missing statement for depmod
  Driver core: remove pr_fmt() from dynamic_dev_dbg() printk
  driver core: prevent device_for_each_child from oopsing
  dynamic debug: resurrect old pr_debug() semantics as pr_devel()
  Driver Core: early platform driver
  proc: mounts_poll() make consistent to mdstat_poll
  sysfs: sysfs poll keep the poll rule of regular file.
  driver core: allow non-root users to listen to uevents
  driver core: fix driver_match_device
  sysfs: don't use global workqueue in sysfs_schedule_callback()

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (22 commits)
  WUSB: correct format of wusb_chid sysfs file
  WUSB: fix oops when completing URBs for disconnected devices
  WUSB: disconnect all devices when stopping a WUSB HCD
  USB: whci-hcd: check return value of usb_hcd_link_urb_to_ep()
  USB: whci-hcd: provide a endpoint_reset method
  USB: add reset endpoint operations
  USB device codes for Motorola phone.
  usb-storage: fix mistake in Makefile
  USB: usb-serial ch341: support for DTR/RTS/CTS
  Revert USB: usb-serial ch341: support for DTR/RTS/CTS
  USB: musb: fix possible panic while resuming
  USB: musb: fix isochronous TXDMA (take 2)
  USB: musb: sanitize clearing TXCSR DMA bits (take 2)
  USB: musb: bugfixes for multi-packet TXDMA support
  USB: musb_host, fix ep0 fifo flushing
  USB: usb-storage: augment unusual_devs entry for Simple Tech/Datafab
  USB: musb_host, minor enqueue locking fix (v2)
  USB: fix oops in cdc-wdm in case of malformed descriptors
  USB: qcserial: Add extra device IDs
  USB: option: Add ids for D-Link DWM-652 3.5G modem
  ...

* master.kernel.org:/home/rmk/linux-2.6-arm: (48 commits)
  [ARM] S3C24XX: ADC: Check pending queue before freeing adc client
  [ARM] S3C: Fix ADC driver sparse warning
  [ARM] Osiris: Fix double initialisation in machine block
  [ARM] Anubis: Fix sparse warnings for items that should be static
  [ARM] JIVE: Fix sparse warnings about items which should be static
  [ARM] S3C: Fix sparse warning from missing 's3c_device_hwmon'
  [ARM] S3C24XX: Fix sparse error in gpiolib.c
  [ARM] 5455/1: Fix IRQ noise from VIC code
  [ARM] 5454/1: ep93xx_eth: fix sparse warnings
  [ARM] remove .gitignore from include/asm-arm
  Update MAINTAINERS
  mxc defconfig updates
  mx31ads: Mark as having full regulatoion constraints with 1133-EV1 board
  mx31ads: Depend on all the WM8350 core dependencies for WM1133-EV1 board
  Fix ifdef in plat-mxc/irc.c
  MX1ADS: remove I2C ifdefs
  qong: remove AIPS[12] mappings from machine-specific iotable
  mx31ads: imoux pins should be passed in as unsigned int
  MXC: remove orphan imx_init_uart() definition
  mx31: pin definition for csi
  ...

I looked, I gagged, I left
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Provide support for WN111v2 USB 802.11n adapter.
Signed-off-by: Daniele Napolitano <dnax88@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Now that TUNER_SET_TYPE_ADDR is gone from the tree, the older code kicks
in and tries to use TUNER_SET_TYPE, which went away a long time ago.

This patch removes all of this logic, as it should not be needed anymore
now, and by doing so, fixes the build.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Fix the transmit function for the following:
* Free XmtCmd in the error code path. This use to leak memory in
  error conditions.
* Do pci mapping after the checksum operations are over. They can
  reallocate the skb at a different location.
* Fix UDP checksum errors which were seen in wireshark
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Leave a spinlock before calling request_irq(). request_irq() calls kmalloc
which can sleep. This was generating a warning dump while driver is loaded.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Use correct queue_id while transmitting non-TCP packets.
They should always use queue 0.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>