CTX_FIRST_VERSION defines the first context version, but also it defines
first context. This patch redefines it to only include the first context
version.
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: Bob Picco <bob.picco@oracle.com>
Reviewed-by: Steven Sistare <steven.sistare@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The only difference between these two functions is that in activate_mm we
unconditionally flush context. However, there is no need to keep this
difference after fixing a bug where cpumask was not reset on a wrap. So, in
this patch we combine these.
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: Bob Picco <bob.picco@oracle.com>
Reviewed-by: Steven Sistare <steven.sistare@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After a wrap (getting a new context version) a process must get a new
context id, which means that we would need to flush the context id from
the TLB before running for the first time with this ID on every CPU. But,
we use mm_cpumask to determine if this process has been running on this CPU
before, and this mask is not reset after a wrap. So, there are two possible
fixes for this issue:

1. Clear mm cpumask whenever mm gets a new context id
2. Unconditionally flush context every time process is running on a CPU

This patch implements the first solution
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: Bob Picco <bob.picco@oracle.com>
Reviewed-by: Steven Sistare <steven.sistare@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

hugetlb_bad_size needs to be called on invalid values.  Also change the
pr_warn to a pr_err to better align with other platforms.
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

VIO devices were being looked up by their index in the machine
description node block, but this often varies over time as devices are
added and removed. Instead, store the ID and look up using the type,
config handle and ID.
Signed-off-by: James Clarke <jrtc27@jrtc27.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=112541Signed-off-by: David S. Miller <davem@davemloft.net>

When a TSB grows beyond its current capacity, a new TSB is allocated
and copy_tsb is called to copy entries from the old TSB to the new.
A hash shift based on page size is used to calculate the index of an
entry in the TSB.  copy_tsb has hard coded PAGE_SHIFT in these
calculations.  However, for huge page TSBs the value REAL_HPAGE_SHIFT
should be used.  As a result, when copy_tsb is called for a huge page
TSB the entries are placed at the incorrect index in the newly
allocated TSB.  When doing hardware table walk, the MMU does not
match these entries and we end up in the TSB miss handling code.
This code will then create and write an entry to the correct index
in the TSB.  We take a performance hit for the table walk miss and
recreation of these entries.

Pass a new parameter to copy_tsb that is the page size shift to be
used when copying the TSB.
Suggested-by: Anthony Yznaga <anthony.yznaga@oracle.com>
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Linux SPARC64 limits NR_CPUS to 4064 because init_cpu_send_mondo_info()
only allocates a single page for NR_CPUS mondo entries. Thus we cannot
use all 4096 CPUs on some SPARC platforms.

To fix, allocate (2^order) pages where order is set according to the size
of cpu_list for possible cpus. Since cpu_list_pa and cpu_mondo_block_pa
are not used in asm code, there are no imm13 offsets from the base PA
that will break because they can only reach one page.

Orabug: 25505750
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Reviewed-by: Bob Picco <bob.picco@oracle.com>
Reviewed-by: Atish Patra <atish.patra@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Reported-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

arch/sparc/kernel/ds.c: In function ‘register_services’:
arch/sparc/kernel/ds.c:912:3: error: ‘strcpy’: writing at least 1 byte
into a region of size 0 overflows the destination
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

SPARC M6-32 platform has (2^5) NUMA nodes, so need to bump up the
CONFIG_NODES_SHIFT to 5.

Orabug: 25577754
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Reviewed-by: Bob Picco <bob.picco@oracle.com>
Reviewed-by: Atish Patra <atish.patra@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull SCSI fixes from James Bottomley:
 "This is quite a big update because it includes a rework of the lpfc
  driver to separate the NVMe part from the FC part.

  The reason for doing this is because two separate trees (the nvme and
  scsi trees respectively) want to update the individual components and
  this separation will prevent a really nasty cross tree entanglement by
  the time we reach the next merge window.

  The rest of the fixes are the usual minor sort with no significant
  security implications"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (25 commits)
  scsi: zero per-cmd private driver data for each MQ I/O
  scsi: csiostor: fix use after free in csio_hw_use_fwconfig()
  scsi: ufs: Clean up some rpm/spm level SysFS nodes upon remove
  scsi: lpfc: fix build issue if NVME_FC_TARGET is not defined
  scsi: lpfc: Fix NULL pointer dereference during PCI error recovery
  scsi: lpfc: update version to 11.2.0.14
  scsi: lpfc: Add MDS Diagnostic support.
  scsi: lpfc: Fix NVMEI's handling of NVMET's PRLI response attributes
  scsi: lpfc: Cleanup entry_repost settings on SLI4 queues
  scsi: lpfc: Fix debugfs root inode "lpfc" not getting deleted on driver unload.
  scsi: lpfc: Fix NVME I+T not registering NVME as a supported FC4 type
  scsi: lpfc: Added recovery logic for running out of NVMET IO context resources
  scsi: lpfc: Separate NVMET RQ buffer posting from IO resources SGL/iocbq/context
  scsi: lpfc: Separate NVMET data buffer pool fir ELS/CT.
  scsi: lpfc: Fix NMI watchdog assertions when running nvmet IOPS tests
  scsi: lpfc: Fix NVMEI driver not decrementing counter causing bad rport state.
  scsi: lpfc: Fix nvmet RQ resource needs for large block writes.
  scsi: lpfc: Adding additional stats counters for nvme.
  scsi: lpfc: Fix system crash when port is reset.
  scsi: lpfc: Fix used-RPI accounting problem.
  ...

Pull ptrace fix from Eric Biederman:
 "This fixes a brown paper bag bug. When I fixed the ptrace interaction
  with user namespaces I added a new field ptracer_cred in struct_task
  and I failed to properly initialize it on fork.

  This dangling pointer wound up breaking runing setuid applications run
  from the enlightenment window manager.

  As this is the worst sort of bug. A regression breaking user space for
  no good reason let's get this fixed"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  ptrace: Properly initialize ptracer_cred on fork

Pull MMC fixes from Ulf Hansson:
 "A couple of MMC host fixes intended for v4.12 rc3:

   - sdhci-xenon: Don't free data for phy allocated by devm*
   - sdhci-iproc: Suppress spurious interrupts
   - cavium: Fix probing race with regulator
   - cavium: Prevent crash with incomplete DT
   - cavium-octeon: Use proper GPIO name for power control
   - cavium-octeon: Fix interrupt enable code"

* tag 'mmc-v4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-iproc: suppress spurious interrupt with Multiblock read
  mmc: cavium: Fix probing race with regulator
  of/platform: Make of_platform_device_destroy globally visible
  mmc: cavium: Prevent crash with incomplete DT
  mmc: cavium-octeon: Use proper GPIO name for power control
  mmc: cavium-octeon: Fix interrupt enable code
  mmc: sdhci-xenon: kill xenon_clean_phy()

Pull i2c fixes from Wolfram Sang:
 "Fix the i2c-designware regression of rc2.

  Also, a DMA buffer fix for the tiny-usb driver where the USB core now
  loudly complains about the non DMA-capable buffer"

[ I had cherry-picked the designware fix separately because it hit my
  laptop, but here is the proper sync with the i2c tree   - Linus ]

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: designware: Fix bogus sda_hold_time due to uninitialized vars
  i2c: i2c-tiny-usb: fix buffer not being DMA capable

When I introduced ptracer_cred I failed to consider the weirdness of
fork where the task_struct copies the old value by default.  This
winds up leaving ptracer_cred set even when a process forks and
the child process does not wind up being ptraced.

Because ptracer_cred is not set on non-ptraced processes whose
parents were ptraced this has broken the ability of the enlightenment
window manager to start setuid children.

Fix this by properly initializing ptracer_cred in ptrace_init_task

This must be done with a little bit of care to preserve the current value
of ptracer_cred when ptrace carries through fork.  Re-reading the
ptracer_cred from the ptracing process at this point is inconsistent
with how PT_PTRACE_CAP has been maintained all of these years.
Tested-by: Takashi Iwai <tiwai@suse.de>
Fixes: 64b875f7 ("ptrace: Capture the ptracer's creds not PT_PTRACE_CAP")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

Pull crypto fix from Herbert Xu:
 "This fixes a regression in the skcipher interface that allows bogus
  key parameters to hit underlying implementations which can cause
  crashes"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: skcipher - Add missing API setkey checks

Pull pstore fix from Kees Cook:
 "Marta noticed another misbehavior in EFI pstore, which this fixes.

  Hopefully this is the last of the v4.12 fixes for pstore!"

* tag 'pstore-v4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  efi-pstore: Fix write/erase id tracking

Pull ACPI fixes from Rafael Wysocki:
 "These revert a 4.11 change that turned out to be problematic and add a
  .gitignore file.

  Specifics:

   - Revert a 4.11 commit related to the ACPI-based handling of laptop
     lids that made changes incompatible with existing user space stacks
     and broke things there (Lv Zheng).

   - Add .gitignore to the ACPI tools directory (Prarit Bhargava)"

* tag 'acpi-4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "ACPI / button: Remove lid_init_state=method mode"
  tools/power/acpi: Add .gitignore file

Pull power management fixes from Rafael Wysocki:
 "These fix RTC wakeup from suspend-to-idle broken recently, fix CPU
  idleness detection condition in the schedutil cpufreq governor, fix a
  cpufreq driver build failure, fix an error code path in the power
  capping framework, clean up the hibernate core and update the
  intel_pstate documentation.

  Specifics:

   - Fix RTC wakeup from suspend-to-idle broken by the recent rework of
     ACPI wakeup handling (Rafael Wysocki).

   - Update intel_pstate driver documentation to reflect the current
     code and explain how it works in more detail (Rafael Wysocki).

   - Fix an issue related to CPU idleness detection on systems with
     shared cpufreq policies in the schedutil governor (Juri Lelli).

   - Fix a possible build issue in the dbx500 cpufreq driver (Arnd
     Bergmann).

   - Fix a function in the power capping framework core to return an
     error code instead of 0 when there's an error (Dan Carpenter).

   - Clean up variable definition in the hibernation core (Pushkar
     Jambhlekar)"

* tag 'pm-4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: dbx500: add a Kconfig symbol
  PM / hibernate: Declare variables as static
  PowerCap: Fix an error code in powercap_register_zone()
  RTC: rtc-cmos: Fix wakeup from suspend-to-idle
  PM / wakeup: Fix up wakeup_source_report_event()
  cpufreq: intel_pstate: Document the current behavior and user interface
  cpufreq: schedutil: use now as reference when aggregating shared policy requests

We need to initializes those variables to 0 for platforms that do not
provide ACPI parameters. Otherwise, we set sda_hold_time to random
values, breaking e.g. Galileo and IOT2000 boards.
Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
Fixes: 9d640843 ("i2c: designware: don't infer timings described by ACPI from clock rate")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Prior to the pstore interface refactoring, the "id" generated during
a backend pstore_write() was only retained by the internal pstore
inode tracking list. Additionally the "part" was ignored, so EFI
would encode this in the id. This corrects the misunderstandings
and correctly sets "id" during pstore_write(), and uses "part"
directly during pstore_erase().
Reported-by: Marta Lofstedt <marta.lofstedt@intel.com>
Fixes: 76cc9580 ("pstore: Replace arguments for write() API")
Fixes: a61072aa ("pstore: Replace arguments for erase() API")
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Marta Lofstedt <marta.lofstedt@intel.com>

Pull networking fixes from David Miller:
 "Mostly netfilter bug fixes in here, but we have some bits elsewhere as
  well.

   1) Don't do SNAT replies for non-NATed connections in IPVS, from
      Julian Anastasov.

   2) Don't delete conntrack helpers while they are still in use, from
      Liping Zhang.

   3) Fix zero padding in xtables's xt_data_to_user(), from Willem de
      Bruijn.

   4) Add proper RCU protection to nf_tables_dump_set() because we
      cannot guarantee that we hold the NFNL_SUBSYS_NFTABLES lock. From
      Liping Zhang.

   5) Initialize rcv_mss in tcp_disconnect(), from Wei Wang.

   6) smsc95xx devices can't handle IPV6 checksums fully, so don't
      advertise support for offloading them. From Nisar Sayed.

   7) Fix out-of-bounds access in __ip6_append_data(), from Eric
      Dumazet.

   8) Make atl2_probe() propagate the error code properly on failures,
      from Alexey Khoroshilov.

   9) arp_target[] in bond_check_params() is used uninitialized. This
      got changes from a global static to a local variable, which is how
      this mistake happened. Fix from Jarod Wilson.

  10) Fix fallout from unnecessary NULL check removal in cls_matchall,
      from Jiri Pirko. This is definitely brown paper bag territory..."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits)
  net: sched: cls_matchall: fix null pointer dereference
  vsock: use new wait API for vsock_stream_sendmsg()
  bonding: fix randomly populated arp target array
  net: Make IP alignment calulations clearer.
  bonding: fix accounting of active ports in 3ad
  net: atheros: atl2: don't return zero on failure path in atl2_probe()
  ipv6: fix out of bound writes in __ip6_append_data()
  bridge: start hello_timer when enabling KERNEL_STP in br_stp_start
  smsc95xx: Support only IPv4 TCP/UDP csum offload
  arp: always override existing neigh entries with gratuitous ARP
  arp: postpone addr_type calculation to as late as possible
  arp: decompose is_garp logic into a separate function
  arp: fixed error in a comment
  tcp: initialize rcv_mss to TCP_MIN_MSS instead of 0
  netfilter: xtables: fix build failure from COMPAT_XT_ALIGN outside CONFIG_COMPAT
  ebtables: arpreply: Add the standard target sanity check
  netfilter: nf_tables: revisit chain/object refcounting from elements
  netfilter: nf_tables: missing sanitization in data from userspace
  netfilter: nf_tables: can't assume lock is acquired when dumping set elems
  netfilter: synproxy: fix conntrackd interaction
  ...

Since the head is guaranteed by the check above to be null, the call_rcu
would explode. Remove the previously logically dead code that was made
logically very much alive and kicking.

Fixes: 985538ee ("net/sched: remove redundant null check on head")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As reported by Michal, vsock_stream_sendmsg() could still
sleep at vsock_stream_has_space() after prepare_to_wait():

  vsock_stream_has_space
    vmci_transport_stream_has_space
      vmci_qpair_produce_free_space
        qp_lock
          qp_acquire_queue_mutex
            mutex_lock

Just switch to the new wait API like we did for commit
d9dc8b0f ("net: fix sleeping for sk_wait_event()").
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Jorgen Hansen <jhansen@vmware.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In commit dc9c4d0f, the arp_target array moved from a static global
to a local variable. By the nature of static globals, the array used to
be initialized to all 0. At present, it's full of random data, which
that gets interpreted as arp_target values, when none have actually been
specified. Systems end up booting with spew along these lines:

[   32.161783] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready
[   32.168475] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready
[   32.175089] 8021q: adding VLAN 0 to HW filter on device lacp0
[   32.193091] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready
[   32.204892] lacp0: Setting MII monitoring interval to 100
[   32.211071] lacp0: Removing ARP target 216.124.228.17
[   32.216824] lacp0: Removing ARP target 218.160.255.255
[   32.222646] lacp0: Removing ARP target 185.170.136.184
[   32.228496] lacp0: invalid ARP target 255.255.255.255 specified for removal
[   32.236294] lacp0: option arp_ip_target: invalid value (-255.255.255.255)
[   32.243987] lacp0: Removing ARP target 56.125.228.17
[   32.249625] lacp0: Removing ARP target 218.160.255.255
[   32.255432] lacp0: Removing ARP target 15.157.233.184
[   32.261165] lacp0: invalid ARP target 255.255.255.255 specified for removal
[   32.268939] lacp0: option arp_ip_target: invalid value (-255.255.255.255)
[   32.276632] lacp0: Removing ARP target 16.0.0.0
[   32.281755] lacp0: Removing ARP target 218.160.255.255
[   32.287567] lacp0: Removing ARP target 72.125.228.17
[   32.293165] lacp0: Removing ARP target 218.160.255.255
[   32.298970] lacp0: Removing ARP target 8.125.228.17
[   32.304458] lacp0: Removing ARP target 218.160.255.255

None of these were actually specified as ARP targets, and the driver does
seem to clean up the mess okay, but it's rather noisy and confusing, leaks
values to userspace, and the 255.255.255.255 spew shows up even when debug
prints are disabled.

The fix: just zero out arp_target at init time.

While we're in here, init arp_all_targets_value in the right place.

Fixes: dc9c4d0f ("bonding: reduce scope of some global variables")
CC: Mahesh Bandewar <maheshb@google.com>
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: netdev@vger.kernel.org
CC: stable@vger.kernel.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

* pm-sleep:
  PM / hibernate: Declare variables as static
  RTC: rtc-cmos: Fix wakeup from suspend-to-idle
  PM / wakeup: Fix up wakeup_source_report_event()

* powercap:
  PowerCap: Fix an error code in powercap_register_zone()

* acpi-button:
  Revert "ACPI / button: Remove lid_init_state=method mode"

* acpi-tools:
  tools/power/acpi: Add .gitignore file

* intel_pstate:
  cpufreq: intel_pstate: Document the current behavior and user interface

* pm-cpufreq:
  cpufreq: dbx500: add a Kconfig symbol

* pm-cpufreq-sched:
  cpufreq: schedutil: use now as reference when aggregating shared policy requests

The assignmnet:

	ip_align = strict ? 2 : NET_IP_ALIGN;

in compare_pkt_ptr_alignment() trips up Coverity because we can only
get to this code when strict is true, therefore ip_align will always
be 2 regardless of NET_IP_ALIGN's value.

So just assign directly to '2' and explain the situation in the
comment above.
Reported-by: "Gustavo A. R. Silva" <garsilva@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The stingray SDHCI hardware supports ACMD12 and automatically
issues after multi block transfer completed.

If ACMD12 in SDHCI is disabled, spurious tx done interrupts are seen
on multi block read command with below error message:

Got data interrupt 0x00000002 even though no data
operation was in progress.

This patch uses SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 to enable
ACM12 support in SDHCI hardware and suppress spurious interrupt.
Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: b580c52d ("mmc: sdhci-iproc: add IPROC SDHCI driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

As of 7bb11dc9 and 0622cab0, bond slaves in a 3ad bond are not
removed from the aggregator when they are down, and the active slave count
is NOT equal to number of ports in the aggregator, but rather the number
of ports in the aggregator that are still enabled. The sysfs spew for
bonding_show_ad_num_ports() has a comment that says "Show number of active
802.3ad ports.", but it's currently showing total number of ports, both
active and inactive. Remedy it by using the same logic introduced in
0622cab0 in __bond_3ad_get_active_agg_info(), so sysfs, procfs and
netlink all report the number of active ports. Note that this means that
IFLA_BOND_AD_INFO_NUM_PORTS really means NUM_ACTIVE_PORTS instead of
NUM_PORTS, and thus perhaps should be renamed for clarity.

Lightly tested on a dual i40e lacp bond, simulating link downs with an ip
link set dev <slave2> down, was able to produce the state where I could
see both in the same aggregator, but a number of ports count of 1.

MII Status: up
Active Aggregator Info:
        Aggregator ID: 1
        Number of ports: 2 <---
Slave Interface: ens10
MII Status: up <---
Aggregator ID: 1
Slave Interface: ens11
MII Status: up
Aggregator ID: 1

MII Status: up
Active Aggregator Info:
        Aggregator ID: 1
        Number of ports: 1 <---
Slave Interface: ens10
MII Status: down <---
Aggregator ID: 1
Slave Interface: ens11
MII Status: up
Aggregator ID: 1

CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: netdev@vger.kernel.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If dma mask checks fail in atl2_probe(), it breaks off initialization,
deallocates all resources, but returns zero.

The patch adds proper error code return value and
make error code setup unified.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the regulator probing is not yet finished this driver
might catch a -EPROBE_DEFER. Returning after this condition
did not remove the created platform device. On a repeated
call to the probe function the of_platform_device_create
fails.

Calling of_platform_device_destroy after EPROBE_DEFER resolves
this bug.
Signed-off-by: Jan Glauber <jglauber@cavium.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

of_platform_device_destroy is the counterpart to
of_platform_device_create which is a non-static function.

After creating a platform device it might be neccessary
to destroy it to deal with -EPROBE_DEFER where a
repeated of_platform_device_create call would fail otherwise.

Therefore also make of_platform_device_destroy globally visible.
Signed-off-by: Jan Glauber <jglauber@cavium.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

In case the DT specifies neither a regulator nor a gpio
for the shared power the driver will crash accessing the regulator.
Prevent the crash by checking the regulator before use.

Use mmc_regulator_get_supply() instead of open coding the same
logic.
Signed-off-by: Jan Glauber <jglauber@cavium.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Andrey Konovalov and idaifish@gmail.com reported crashes caused by
one skb shared_info being overwritten from __ip6_append_data()

Andrey program lead to following state :

copy -4200 datalen 2000 fraglen 2040
maxfraglen 2040 alloclen 2048 transhdrlen 0 offset 0 fraggap 6200

The skb_copy_and_csum_bits(skb_prev, maxfraglen, data + transhdrlen,
fraggap, 0); is overwriting skb->head and skb_shared_info

Since we apparently detect this rare condition too late, move the
code earlier to even avoid allocating skb and risking crashes.

Once again, many thanks to Andrey and syzkaller team.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Reported-by: <idaifish@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We need to initializes those variables to 0 for platforms that do not
provide ACPI parameters. Otherwise, we set sda_hold_time to random
values, breaking e.g. Galileo and IOT2000 boards.

Fixes: 9d640843 ("i2c: designware: don't infer timings described by ACPI from clock rate")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Since v4.9 i2c-tiny-usb generates the below call trace
and longer works, since it can't communicate with the
USB device. The reason is, that since v4.9 the USB
stack checks, that the buffer it should transfer is DMA
capable. This was a requirement since v2.2 days, but it
usually worked nevertheless.

[   17.504959] ------------[ cut here ]------------
[   17.505488] WARNING: CPU: 0 PID: 93 at drivers/usb/core/hcd.c:1587 usb_hcd_map_urb_for_dma+0x37c/0x570
[   17.506545] transfer buffer not dma capable
[   17.507022] Modules linked in:
[   17.507370] CPU: 0 PID: 93 Comm: i2cdetect Not tainted 4.11.0-rc8+ #10
[   17.508103] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
[   17.509039] Call Trace:
[   17.509320]  ? dump_stack+0x5c/0x78
[   17.509714]  ? __warn+0xbe/0xe0
[   17.510073]  ? warn_slowpath_fmt+0x5a/0x80
[   17.510532]  ? nommu_map_sg+0xb0/0xb0
[   17.510949]  ? usb_hcd_map_urb_for_dma+0x37c/0x570
[   17.511482]  ? usb_hcd_submit_urb+0x336/0xab0
[   17.511976]  ? wait_for_completion_timeout+0x12f/0x1a0
[   17.512549]  ? wait_for_completion_timeout+0x65/0x1a0
[   17.513125]  ? usb_start_wait_urb+0x65/0x160
[   17.513604]  ? usb_control_msg+0xdc/0x130
[   17.514061]  ? usb_xfer+0xa4/0x2a0
[   17.514445]  ? __i2c_transfer+0x108/0x3c0
[   17.514899]  ? i2c_transfer+0x57/0xb0
[   17.515310]  ? i2c_smbus_xfer_emulated+0x12f/0x590
[   17.515851]  ? _raw_spin_unlock_irqrestore+0x11/0x20
[   17.516408]  ? i2c_smbus_xfer+0x125/0x330
[   17.516876]  ? i2c_smbus_xfer+0x125/0x330
[   17.517329]  ? i2cdev_ioctl_smbus+0x1c1/0x2b0
[   17.517824]  ? i2cdev_ioctl+0x75/0x1c0
[   17.518248]  ? do_vfs_ioctl+0x9f/0x600
[   17.518671]  ? vfs_write+0x144/0x190
[   17.519078]  ? SyS_ioctl+0x74/0x80
[   17.519463]  ? entry_SYSCALL_64_fastpath+0x1e/0xad
[   17.519959] ---[ end trace d047c04982f5ac50 ]---

Cc: <stable@vger.kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Till Harbaum <till@harbaum.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

The code to fetch a 64-bit value from user space was entirely buggered,
and has been since the code was merged in early 2016 in commit
b2f68038 ("x86/mm/32: Add support for 64-bit __get_user() on 32-bit
kernels").

Happily the buggered routine is almost certainly entirely unused, since
the normal way to access user space memory is just with the non-inlined
"get_user()", and the inlined version didn't even historically exist.

The normal "get_user()" case is handled by external hand-written asm in
arch/x86/lib/getuser.S that doesn't have either of these issues.

There were two independent bugs in __get_user_asm_u64():

 - it still did the STAC/CLAC user space access marking, even though
   that is now done by the wrapper macros, see commit 11f1a4b9
   ("x86: reorganize SMAP handling in user space accesses").

   This didn't result in a semantic error, it just means that the
   inlined optimized version was hugely less efficient than the
   allegedly slower standard version, since the CLAC/STAC overhead is
   quite high on modern Intel CPU's.

 - the double register %eax/%edx was marked as an output, but the %eax
   part of it was touched early in the asm, and could thus clobber other
   inputs to the asm that gcc didn't expect it to touch.

   In particular, that meant that the generated code could look like
   this:

        mov    (%eax),%eax
        mov    0x4(%eax),%edx

   where the load of %edx obviously was _supposed_ to be from the 32-bit
   word that followed the source of %eax, but because %eax was
   overwritten by the first instruction, the source of %edx was
   basically random garbage.

The fixes are trivial: remove the extraneous STAC/CLAC entries, and mark
the 64-bit output as early-clobber to let gcc know that no inputs should
alias with the output register.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable@kernel.org   # v4.8+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>