Commits · c50d105aa7b289fd07f87a18642c261b31b7b5f5 · nexedi / linux

24 Sep, 2020 29 commits

mt76: move mt76_check_agg_ssn to driver tx_prepare calls · c50d105a

Felix Fietkau authored Jul 28, 2020

mt7615 and newer drivers do not need this, since they use sequence number offload
Moving this code also reduces the number of callsites to make it easier to review
Signed-off-by: Felix Fietkau <nbd@nbd.name>

c50d105a

mt76: mt7915: enable offloading of sequence number assignment · 577dbc6c
Felix Fietkau authored Jul 27, 2020
```
Preparation for supporting more offload features
Signed-off-by: Felix Fietkau <nbd@nbd.name>
```
577dbc6c
mt76: mt7915: increase tx retry count · 3dff1918
Felix Fietkau authored Aug 08, 2020
```
Set it to 15 to match reference driver
Signed-off-by: Felix Fietkau <nbd@nbd.name>
```
3dff1918

mt76: mt7915: clean up station stats polling and rate control update · 1daf2522

Felix Fietkau authored Jul 26, 2020

Queueing a per-sta work item from the tx free path can become very expensive
under load. This work is only supposed to pull rate control stats every
second and deal with rate control changes.

Additionally, the rate control update code was wrong, because it was
confusing bit masks and bit numbers in test_bit.

Fix this by introducing a dedicated device work item for rate control
updates, and by polling station stats from the phy mac work.
Stations requiring polling or rate control updates are added to lists
protected by dev->sta_poll_lock.
Signed-off-by: Felix Fietkau <nbd@nbd.name>

1daf2522

mt76: mt7915: do not do any work in napi poll after calling napi_complete_done() · 38b04398

Felix Fietkau authored Aug 07, 2020

Fixes a race condition where multiple tx cleanup or sta poll tasks could run
in parallel.
Signed-off-by: Felix Fietkau <nbd@nbd.name>

38b04398

mt76: mt7615: do not do any work in napi poll after calling napi_complete_done() · 6e4f584e
Felix Fietkau authored Aug 07, 2020
```
Fixes a race condition where multiple tx cleanup tasks could run in parallel
Signed-off-by: Felix Fietkau <nbd@nbd.name>
```
6e4f584e

mt76: mt76x02: clean up and fix interrupt masking in the irq handler · 2c270b0e

Felix Fietkau authored Aug 07, 2020

Only clear unmasked interrupts. If an interrupt is temporarily masked,
its pending events need to be processed later, even if another interrupt
happened in the mean time.
Disable interrupts in one call before scheduling
Signed-off-by: Felix Fietkau <nbd@nbd.name>

2c270b0e

mt76: mt7615: only clear unmasked interrupts in irq tasklet · 40fde8c4

Felix Fietkau authored Aug 07, 2020

If an interrupt is temporarily masked, its pending events need to be processed
later, even if another interrupt happened in the mean time.
Signed-off-by: Felix Fietkau <nbd@nbd.name>

40fde8c4

mt76: mt7915: clean up and fix interrupt masking in the irq handler · acc4696d

Felix Fietkau authored Aug 07, 2020

Only clear unmasked interrupts. If an interrupt is temporarily masked,
its pending events need to be processed later, even if another interrupt
happened in the mean time.
Signed-off-by: Felix Fietkau <nbd@nbd.name>

acc4696d

mt76: set interrupt mask register to 0 before requesting irq · 9df8c539

Felix Fietkau authored Aug 07, 2020

Avoids spurious interrupts in case the hardware was running already
Signed-off-by: Felix Fietkau <nbd@nbd.name>

9df8c539

mt76: fix double DMA unmap of the first buffer on 7615/7915 · 27d5c528

Felix Fietkau authored Jul 25, 2020

A small part of the first skb buffer is passed to the firmware for parsing
via DMA, while the full buffer is passed as part of the TXP.

Avoid calling DMA unmap on the first part (with a different length than map)
Signed-off-by: Felix Fietkau <nbd@nbd.name>

27d5c528

mt76: mt7915: fix crash on tx rate report for invalid stations · c12b7c79
Felix Fietkau authored Jul 24, 2020
```
Check wcid RCU pointer before using it
Signed-off-by: Felix Fietkau <nbd@nbd.name>
```
c12b7c79

mt76: mt7915: enable U-APSD on AP side · 4bf04d33

Ryder Lee authored Aug 01, 2020

Enable U-APSD support for AP interface.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

4bf04d33

mt76: mt76s: get rid of unused variable · 35296ed2

Lorenzo Bianconi authored Jul 31, 2020

Remove unused state variable in mt76_sdio structure
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

35296ed2

mt76: mt76s: move tx/rx processing in 2 separate works · 4d59f8c9

Lorenzo Bianconi authored Jul 30, 2020

In order to maximize parallelism, split status work in tx status work
and rx net work
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

4d59f8c9

mt76: mt76s: move status processing in txrx wq · d74fda4c

Lorenzo Bianconi authored Jul 30, 2020

As it has been done for tx and rx processing, move tx/rx status
processing into mt76s_txrx_wq workqueue
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

d74fda4c

mt76: mt7663s: move rx processing in txrx wq · 3e5f374d

Lorenzo Bianconi authored Jul 30, 2020

Move rx processing to mt76s_txrx_wq in order to minimize the interval when
the sdio bus is locked during rx
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

3e5f374d

mt76: mt76s: move tx processing in a dedicated wq · 974327a4

Lorenzo Bianconi authored Jul 30, 2020

Introduce mt76s_txrx_wq workqueue and move tx processing from kthread to
a dedicated work. This is preliminary patch to improve mt7663s throughput
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

974327a4

mt76: mt76s: fix oom in mt76s_tx_queue_skb_raw · 72372f3a

Lorenzo Bianconi authored Jul 30, 2020

Free the mcu skb in case of error in mt76s_tx_queue_skb_raw routine
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

72372f3a

mt76: mt7615: reschedule runtime-pm receiving a tx interrupt · 0825af2d

Lorenzo Bianconi authored Jul 30, 2020

Reschedule runtime-pm after receiving a tx interrupt.
Update runtime-pm last activity before injecting packets
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

0825af2d

mt76: do not inject packets if MT76_STATE_PM is set · 763d750c

Lorenzo Bianconi authored Jul 30, 2020

Do not tx packets in mt76_txq_send_burst() or mt76_txq_schedule_list()
if the device is in runtime-pm
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

763d750c

mt76: mt7615: hold mt76 lock queueing wd in mt7615_queue_key_update · cddaaa56

Lorenzo Bianconi authored Jul 30, 2020

wq queue is always updated holding mt76 spinlock. Grab mt76 lock in
mt7615_queue_key_update() before putting a new element at the end of the
queue.

Fixes: eb99cc95 ("mt76: mt7615: introduce mt7663u support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

cddaaa56

mt76: mt7663s: move drv_own/fw_own in mt7615_mcu_ops · d6e08f2b

Lorenzo Bianconi authored Jul 20, 2020

Initialize set_drv_ctrl and set_fw_ctrl function pointers in
mt7663s_mcu_init. This is a preliminary patch to enable runtime-pm for
mt7663s chipset.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

d6e08f2b

mt76: mt7615: move drv_own/fw_own in mt7615_mcu_ops · 186b659c

Lorenzo Bianconi authored Jul 20, 2020

Introduce set_drv_ctrl and set_fw_ctrl function pointers in
mt7615_mcu_ops data structure. This is a preliminary patch to enable
runtime-pm for non-pci chipsets
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

186b659c

mt76: mt7615: register ext_phy if DBDC is detected · 7660a1bd

Shayne Chen authored Jun 24, 2020

MT_EE_WIFI_CONF field can be used to detect if the chipset is MT7615D.
Thus, add support to automatically register ext_phy if DBDC is detected.
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

7660a1bd

zd1201: simplify the return expression of zd1201_set_maxassoc() · 5acbf34e

Qinglang Miao authored Sep 21, 2020

Simplify the return expression.
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200921131115.93504-1-miaoqinglang@huawei.com

5acbf34e

rtw88: Fix potential probe error handling race with wow firmware loading · ac4bac99

Andreas Färber authored Sep 20, 2020

If rtw_core_init() fails to load the wow firmware, rtw_core_deinit()
will not get called to clean up the regular firmware.

Ensure that an error loading the wow firmware does not produce an oops
for the regular firmware by waiting on its completion to be signalled
before returning. Also release the loaded firmware.

Fixes: c8e5695e ("rtw88: load wowlan firmware if wowlan is supported")
Cc: Chin-Yen Lee <timlee@realtek.com>
Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200920132621.26468-3-afaerber@suse.de

ac4bac99

rtw88: Fix probe error handling race with firmware loading · ecda9cda

Andreas Färber authored Sep 20, 2020

In case of rtw8822be, a probe failure after successful rtw_core_init()
has been observed to occasionally lead to an oops from rtw_load_firmware_cb():

[    3.924268] pci 0001:01:00.0: [10ec:b822] type 00 class 0xff0000
[    3.930531] pci 0001:01:00.0: reg 0x10: [io  0x0000-0x00ff]
[    3.936360] pci 0001:01:00.0: reg 0x18: [mem 0x00000000-0x0000ffff 64bit]
[    3.944042] pci 0001:01:00.0: supports D1 D2
[    3.948438] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    3.957312] pci 0001:01:00.0: BAR 2: no space for [mem size 0x00010000 64bit]
[    3.964645] pci 0001:01:00.0: BAR 2: failed to assign [mem size 0x00010000 64bit]
[    3.972332] pci 0001:01:00.0: BAR 0: assigned [io  0x10000-0x100ff]
[    3.986240] rtw_8822be 0001:01:00.0: enabling device (0000 -> 0001)
[    3.992735] rtw_8822be 0001:01:00.0: failed to map pci memory
[    3.998638] rtw_8822be 0001:01:00.0: failed to request pci io region
[    4.005166] rtw_8822be 0001:01:00.0: failed to setup pci resources
[    4.011580] rtw_8822be: probe of 0001:01:00.0 failed with error -12
[    4.018827] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    4.029121] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    4.050828] Unable to handle kernel paging request at virtual address edafeaac9607952c
[    4.058975] Mem abort info:
[    4.058980]   ESR = 0x96000004
[    4.058990]   EC = 0x25: DABT (current EL), IL = 32 bits
[    4.070353]   SET = 0, FnV = 0
[    4.073487]   EA = 0, S1PTW = 0
[    4.073501] dw-apb-uart 98007800.serial: forbid DMA for kernel console
[    4.076723] Data abort info:
[    4.086415]   ISV = 0, ISS = 0x00000004
[    4.087731] Freeing unused kernel memory: 1792K
[    4.090391]   CM = 0, WnR = 0
[    4.098091] [edafeaac9607952c] address between user and kernel address ranges
[    4.105418] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[    4.111129] Modules linked in:
[    4.114275] CPU: 1 PID: 31 Comm: kworker/1:1 Not tainted 5.9.0-rc5-next-20200915+ #700
[    4.122386] Hardware name: Realtek Saola EVB (DT)
[    4.127223] Workqueue: events request_firmware_work_func
[    4.132676] pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--)
[    4.138393] pc : rtw_load_firmware_cb+0x54/0xbc
[    4.143040] lr : request_firmware_work_func+0x44/0xb4
[    4.148217] sp : ffff800010133d70
[    4.151616] x29: ffff800010133d70 x28: 0000000000000000
[    4.157069] x27: 0000000000000000 x26: 0000000000000000
[    4.162520] x25: 0000000000000000 x24: 0000000000000000
[    4.167971] x23: ffff00007ac21908 x22: ffff00007ebb2100
[    4.173424] x21: ffff00007ad35880 x20: edafeaac96079504
[    4.178877] x19: ffff00007ad35870 x18: 0000000000000000
[    4.184328] x17: 00000000000044d8 x16: 0000000000004310
[    4.189780] x15: 0000000000000800 x14: 00000000ef006305
[    4.195231] x13: ffffffff00000000 x12: ffffffffffffffff
[    4.200682] x11: 0000000000000020 x10: 0000000000000003
[    4.206135] x9 : 0000000000000000 x8 : ffff00007e73f680
[    4.211585] x7 : 0000000000000000 x6 : ffff80001119b588
[    4.217036] x5 : ffff00007e649c80 x4 : ffff00007e649c80
[    4.222487] x3 : ffff80001119b588 x2 : ffff8000108d1718
[    4.227940] x1 : ffff800011bd5000 x0 : ffff00007ac21600
[    4.233391] Call trace:
[    4.235906]  rtw_load_firmware_cb+0x54/0xbc
[    4.240198]  request_firmware_work_func+0x44/0xb4
[    4.245027]  process_one_work+0x178/0x1e4
[    4.249142]  worker_thread+0x1d0/0x268
[    4.252989]  kthread+0xe8/0xf8
[    4.256127]  ret_from_fork+0x10/0x18
[    4.259800] Code: f94013f5 a8c37bfd d65f03c0 f9000260 (f9401681)
[    4.266049] ---[ end trace f822ebae1a8545c2 ]---

To avoid this, wait on the completion callbacks in rtw_core_deinit()
before releasing firmware and continuing teardown.

Note that rtw_wait_firmware_completion() was introduced with
c8e5695e ("rtw88: load wowlan firmware
if wowlan is supported"), so backports to earlier branches may need to
inline wait_for_completion(&rtwdev->fw.completion) instead.

Fixes: e3037485 ("rtw88: new Realtek 802.11ac driver")
Fixes: c8e5695e ("rtw88: load wowlan firmware if wowlan is supported")
Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200920132621.26468-2-afaerber@suse.de

ecda9cda

brcmfmac: check return value of driver_for_each_device() · 72a398a6

Zhang Changzhong authored Sep 19, 2020

Fixes the following W=1 kernel build warning(s):

drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c:1576:6: warning:
 variable 'ret' set but not used [-Wunused-but-set-variable]
  1576 |  int ret;
       |      ^~~

driver_for_each_device() has been declared with __must_check, so the
return value should be checked.
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1600481191-14250-1-git-send-email-zhangchangzhong@huawei.com

72a398a6

22 Sep, 2020 6 commits

rtlwifi: rtl8723be: use true,false for bool variable large_cfo_hit · dd7a3a33

Jason Yan authored Sep 19, 2020

This addresses the following coccinelle warning:

drivers/net/wireless/realtek/rtlwifi/rtl8723be/dm.c:1155:27-47: WARNING:
Comparison of 0/1 to bool variable
drivers/net/wireless/realtek/rtlwifi/rtl8723be/dm.c:1156:3-23: WARNING:
Assignment of 0/1 to bool variable
drivers/net/wireless/realtek/rtlwifi/rtl8723be/dm.c:1159:3-23: WARNING:
Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200919074437.3459305-1-yanaijie@huawei.com

dd7a3a33

rtlwifi: rtl8821ae: use true,false for bool variable large_cfo_hit · ff4d1d72

Jason Yan authored Sep 19, 2020

This addresses the following coccinelle warning:

drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c:2680:27-47: WARNING:
Comparison of 0/1 to bool variable
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c:2683:3-23: WARNING:
Assignment of 0/1 to bool variable
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c:2686:3-23: WARNING:
Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200919074428.3459234-1-yanaijie@huawei.com

ff4d1d72

rtlwifi: rtl8192ee: use true,false for bool variable large_cfo_hit · a03efb41

Jason Yan authored Sep 19, 2020

This addresses the following coccinelle warning:

drivers/net/wireless/realtek/rtlwifi/rtl8192ee/dm.c:721:27-47:
WARNING: Comparison of 0/1 to bool variable
drivers/net/wireless/realtek/rtlwifi/rtl8192ee/dm.c:722:3-23: WARNING:
Assignment of 0/1 to bool variable
drivers/net/wireless/realtek/rtlwifi/rtl8192ee/dm.c:725:2-22: WARNING:
Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200919074412.3459163-1-yanaijie@huawei.com

a03efb41

rtlwifi: Use ffs in <foo>_phy_calculate_bit_shift · 6c1d6191

Joe Perches authored Sep 18, 2020

Remove the loop and use the generic ffs instead.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/e2ab424d24b74901bc0c39f0c60f75e871adf2ba.camel@perches.com

6c1d6191

mt7601u: Convert to DEFINE_SHOW_ATTRIBUTE · 7f1e215b

Qinglang Miao authored Sep 19, 2020

Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Acked-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200919024838.14172-1-miaoqinglang@huawei.com

7f1e215b

wlcore: Remove unused function no_write_handler() · d0c8ff7c

YueHaibing authored Sep 18, 2020

There is no caller in tree, so can remove it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200918131305.20976-1-yuehaibing@huawei.com

d0c8ff7c

21 Sep, 2020 5 commits