Initially it tries to find a probe:vfs_getname that should be setup
with:

 perf probe 'vfs_getname=getname_flags:65 pathname=result->name:string'

or with slight changes to cope with code flux in the getname_flags code.

In the future, if a "vfs:getname" tracepoint becomes available, then it
will be preferred.

This is not strictly required and more expensive method of reading the
/proc/pid/fd/ symlink will be used when the fd->path array entry is not
populated by a previous vfs_getname + open syscall ret sequence.

As with any other 'perf probe' probe the setup must be done just once
and the probe will be left inactive, waiting for users, be it 'perf
trace' of any other tool.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ujg8se8glq5izmu8cdkq15po@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

So that the part that grows the array as needed is untied from the code
that reads the /proc/pid/fd symlink and can be used for the vfs_getname
hook that will set the fd -> path translation too, when available.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ydo5rumyv9hdc1vsfmqamugs@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Cast __u64 to u64 to silence this warning on older distros, such as
Fedora 12:

    CC       /tmp/build/perf/util/scripting-engines/trace-event-perl.o
  cc1: warnings being treated as errors
  util/scripting-engines/trace-event-perl.c: In function ‘perl_process_tracepoint’:
  util/scripting-engines/trace-event-perl.c:285: error: format ‘%lu’ expects type ‘long unsigned int’, but argument 2 has type ‘__u64’
  make[1]: *** [/tmp/build/perf/util/scripting-engines/trace-event-perl.o] Error 1
  make: *** [install] Error 2
  make: Leaving directory `/home/acme/git/linux/tools/perf'
  [acme@fedora12 linux]$
Reported-by: Waiman Long <Waiman.Long@hp.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Waiman Long <Waiman.Long@hp.com>
Link: http://lkml.kernel.org/n/tip-nlxofdqcdjfm0w9o6bgq4kqv@git.kernel.org
Link: http://lkml.kernel.org/r/1381265120-58532-1-git-send-email-Waiman.Long@hp.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

  * kcore annotation improvements, including build-id cache support,
    multi map 'call' instruction navigation fixes, kcore address
    validation, objdump workarounds. From Adrian Hunter.

  * 'trace' beautifiers for lots of syscall arguments, from Arnaldo Carvalho de Melo.

  * More compact 'trace' output by suppressing zeroed args, from Arnaldo Carvalho de Melo.

  * Show thread COMM by default in 'trace', from Arnaldo Carvalho de Melo.

  * Show path associated with fd in live sessions, using a 'vfs_getname'
    'perf probe' created dynamic tracepoint or by looking at /proc/pid/fd, from Arnaldo Carvalho de Melo.

  * Memory and mmap leak fixes from Chenggang Qin.

  * Add option to show full timestamp in 'trace', from David Ahern.

  * Add 'record' command in 'trace', to record raw_syscalls:*, from David Ahern.

  * Add summary option to dump syscall statistics in 'trace', from David Ahern.

  * Fix comm resolution in 'trace' when reading events from file, from David Ahern.

  * Improved messages when doing profiling in all or a subset of CPUs
    using a workload as the session delimitator, as in:

     'perf stat --cpu 0,2 sleep 10s'

    from Arnaldo Carvalho de Melo.

  * Add units to nanosec-based counters in 'perf stat', from David Ahern.

  * Assorted build fixes for from David Ahern and Jiri Olsa.

  * 'perf lock' fixes and cleanups, from Davidlohr Bueso.

  * Memory leak fixes in 'perf test', from Felipe Pena.

  * Build system super speedups, from Ingo Molnar.

  * Fix mmap_read event overflow, from Jiri Olsa.

  * Code cleanups from Jiri Olsa.

  * Allow specifying B/K/M/G unit to the --mmap-pages arguments, from Jiri Olsa.

  * Separate the GTK support in a separate libperf-gtk.so DSO, that is
    only loaded when --gtk is specified, from Namhyung Kim.

  * Fixes for some memory leaks, from Namhyumg Kim.

  * Fix srcline sort key behavior, from Namhyung Kim.

  * Fix failing assertions in numa bench, from Petr Holasek.

  * perf bash completion fixes and improvements from Ramkumar Ramachandra.

  * Improve error messages in 'trace', providing hints about system configuration
    steps needed for using it, from Ramkumar Ramachandra.

  * Remove bogus info when using 'perf stat' -e cycles/instructions, from
    Ramkumar Ramachandra.

  * Support for Openembedded/Yocto -dbg packages, from Ricardo Ribalda Delgado.

  * Implement addr2line directly using libbfd, from Roberto Vitillo.

  * Add new option --ignore-vmlinux for perf top, from Willy Tarreau.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge Linux v3.12-rc5, to pick up the latest fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>

In function filename__read_debuglink(), while the ELF file is opend and
mmapped in elf_begin(), but if this file is considered to not be usable
during the following code, we will goto the close(fd) directly. The
elf_end() is skipped.  So, the mmaped ELF file cannot be munmapped. The
mmapped areas exist during the life of perf.

This is a memory leak.  This patch fixed this bug.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Chenggang Qin <chenggang.qcg@taobao.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Chenggang Qin <chenggang.qcg@taobao.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Yanmin Zhang <yanmin.zhang@intel.com>
Link: http://lkml.kernel.org/r/1381451279-4109-1-git-send-email-chenggang.qin@gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

In function symbols__fixup_duplicate(), while duplicated symbols are
found, only the rb_node is removed from the tree. The symbol structures
themself are ignored.  Then, these memory areas are lost.
Signed-off-by: Chenggang Qin <chenggang.qcg@taobao.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Yanmin Zhang <yanmin.zhang@intel.com>
Link: http://lkml.kernel.org/r/1381451279-4109-3-git-send-email-chenggang.qin@gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The target address is provided by objdump and is not necessary a memory
address.  Add a helper to get the correct address.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1381747424-3557-8-git-send-email-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

kcore can be used to view the running kernel object code.  However,
kcore changes as modules are loaded and unloaded, and when the kernel
decides to modify its own code.  Consequently it is useful to create a
copy of kcore at a particular time.  Unlike vmlinux, kcore is not unique
for a given build-id.  And in addition, the kallsyms and modules files
are also needed.  The tool therefore creates a directory:

	~/.debug/[kernel.kcore]/<build-id>/<YYYYmmddHHMMSShh>

which contains: kcore, kallsyms and modules.

Note that the copied kcore contains only code sections.  See the
kcore_copy() function for how that is determined.

The tool will not make additional copies of kcore if there is already
one with the same modules at the same addresses.

Currently, perf tools will not look for kcore in the cache.  That is
addressed in another patch.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/525BF849.5030405@intel.com
[ renamed 'index' to 'idx' to avoid shadowing string.h symbol in f12,
  use at least one member initializer when initializing a struct to
  zeros, also to fix the build on f12 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

When following a call, annotate_browser__callq() uses the current
symbol's map to look up the target ip.  That will not work if the target
ip is on a map with a different mapping (i.e.  start - pgoff is
different).
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1381747424-3557-3-git-send-email-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

When no vmlinux is found, tools will use kallsyms and, if possible,
kcore.  Add the ability to find kcore in the build-id cache.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1381747424-3557-7-git-send-email-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Add a function to copy a file specifying the permissions to use for the
created file.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1381747424-3557-5-git-send-email-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Use the new map_groups__find_ams() method to find kcore symbols on other
maps.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1381747424-3557-4-git-send-email-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Namhyung Kim noticed that the autodep .d file inclusion rule was
unnecessarily complicated:

  > > +-include *.d */*.d
  >
  > Hmm.. this */*.d part is really needed?

Only include *.d files.
Reported-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Namhyung Kim noticed that the stackprotector testcase was incomplete:

  > The flag being checked should be -"W"stack-protector instead of
  > -"f"stack-protector.  And the gcc manpage says that -Wstack-protector is
  > only active when -fstack-protector is active.  So the end result should
  > look like
  >
  >         $(BUILD) -Werror -fstack-protector -Wstack-protector

Add -Wstack-protector.
Reported-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Namhyung Kim noticed that the volatile-register-var feature check
is superfluous:

 > The gcc manpage says this warning is enabled by -Wall, and we add -Wall
 > to CFLAGS before doing feature checks.  So all gcc versions that support
 > -Wvolatile-register-var enables it by default without this check and
 > older gcc versions will always fail the feature check.

Remove it - this will further speed up feature checks.
Reported-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Ulrich Drepper and Namhyung Kim reported that the libelf logic in
config/Makefile is duplicated in part.

Remove the duplication, and also remove the now unused FLAGS_LIBELF
variable.
Reported-by: Ulrich Drepper <drepper@gmail.com>
Reported-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Namhyung Kim reported these duplicate DPACKAGE definitions:

  test-libbfd:
       $(BUILD) -DPACKAGE='perf' -DPACKAGE=perf -lbfd -ldl

Fix all affected places and use Namhyung's suggestion that the
definition should look like a normal C string: -DPACKAGE='"perf"'.
Reported-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Arnaldo reported that 'make DEBUG=1' does not work anymore.

The reason is that 'Makefile' only passes it through to
'Makefile.perf' via the environment, but 'Makefile.perf'
checks that it's a command line option:

    ifeq ("$(origin DEBUG)", "command line")
      PERF_DEBUG = $(DEBUG)
    endif

So pass it through properly, and also clean up DEBUG parameter
handling while at it and fix a couple of annoyances:

 - DEBUG=0 used to be interpreted as 'debugging on'. Turn it
   into 'debugging off' instead.

 - Same was the case for 'DEBUG=' - turn that into debug-off
   as well.

 - Pass in just a clean, sanitized 'DEBUG' value and get rid of
   the intermediate, unnecessary PERF_DEBUG variable.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Arnaldo reported that non-existent build directories were not
recognized  properly. The reason is readlink failure causing 'O'
to become empty.

Solve it by passing through the 'O' variable unmodified if
readlink fails.
Reported-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20131009150023.GA10167@gmail.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Add a function to find a symbol using an ip that might be on a different
map.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1381747424-3557-2-git-send-email-adrian.hunter@intel.comSigned-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The objdump tool fails to annotate module symbols when looking at kcore.

Workaround this by extracting object code from kcore and putting it in a
temporary file for objdump to use instead.

The temporary file is created to look like kcore but contains only the
function being disassembled.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1381320078-16497-3-git-send-email-adrian.hunter@intel.com
[ Renamed 'index' to 'idx' to avoid shadowing string.h's 'index' in Fedora 12,
  Replace local with variable length with malloc/free to fix build in Fedora 12 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Before using kcore we need to check that modules are in memory at the
same addresses that they were when data was recorded.

This is done because, while we could remap symbols to different
addresses, the object code linkages would still be different which would
provide an erroneous view of the object code.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1381320078-16497-2-git-send-email-adrian.hunter@intel.com
[ Rename basename to base_name to avoid shadowing libgen's basename in fedora 12 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

We fail build with NO_DEMANGLE with missing -lbfd externals error.
The reason is that we now use bfd code in srcline object:
  perf tools: Implement addr2line directly using libbfd

So we need to check/add -lbfd always now.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>

Fix for a memory leak on test_file() function in dso-data.c.
Signed-off-by: Felipe Pena <felipensp@gmail.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1381370438-4209-1-git-send-email-felipensp@gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

trace-event-parse.c:parse_proc_kallsyms()

    Old GCC (4.4.2) does not see through the code flow of get_srcline() and
gets confused about the status of 'file' and 'line':

    CC       /tmp/build/perf/util/srcline.o
  cc1: warnings being treated as errors
  util/srcline.c: In function ¿get_srcline¿:
  util/srcline.c:226: error: ¿file¿ may be used uninitialized in this function
  util/srcline.c:227: error: ¿line¿ may be used uninitialized in this function
  make[1]: *** [/tmp/build/perf/util/srcline.o] Error 1
  make: *** [install] Error 2
  make: Leaving directory `/home/acme/git/linux/tools/perf'
  [acme@fedora12 linux]$

Help out GCC by initializing 'file' and 'line'.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Link: http://lkml.kernel.org/n/tip-h8k7h49z3cndqgjdftkmm9f8@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

When enabled dumps a summary of all syscalls by task with the usual
statistics -- min, max, average and relative stddev. For example,

make - 26341 :       3344   [ 17.4% ]      0.000 ms

                read :   52    0.000     4.802     0.644   30.08
               write :   20    0.004     0.036     0.010   21.72
                open :   24    0.003     0.046     0.014   23.68
               close :   64    0.002     0.055     0.008   22.53
                stat : 2714    0.002     0.222     0.004    4.47
               fstat :   18    0.001     0.041     0.006   46.26
                mmap :   30    0.003     0.009     0.006    5.71
            mprotect :    8    0.006     0.039     0.016   32.16
              munmap :   12    0.007     0.077     0.020   38.25
                 brk :   48    0.002     0.014     0.004   10.18
        rt_sigaction :   18    0.002     0.002     0.002    2.11
      rt_sigprocmask :   60    0.002     0.128     0.010   32.88
              access :    2    0.006     0.006     0.006    0.00
                pipe :   12    0.004     0.048     0.013   35.98
               vfork :   34    0.448     0.980     0.692    3.04
              execve :   20    0.000     0.387     0.046   56.66
               wait4 :   34    0.017  9923.287   593.221   68.45
               fcntl :    8    0.001     0.041     0.013   48.79
            getdents :   48    0.002     0.079     0.013   19.62
              getcwd :    2    0.005     0.005     0.005    0.00
               chdir :    2    0.070     0.070     0.070    0.00
           getrlimit :    2    0.045     0.045     0.045    0.00
          arch_prctl :    2    0.002     0.002     0.002    0.00
           setrlimit :    2    0.002     0.002     0.002    0.00
              openat :   94    0.003     0.005     0.003    2.11
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1381289214-24885-3-git-send-email-dsahern@gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Similar to other findnew based methods if the requested object is not
found, add it to the list.

v2: followed format of other findnew methods per acme's request
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1381289214-24885-2-git-send-email-dsahern@gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Currently, execution of 'perf trace' reports the following cryptic
message to the user:

$ perf trace
Couldn't read the raw_syscalls tracepoints information!

Typically this happens because the user does not have permissions to
read the debugfs filesystem. Also handle the case when the kernel was
not compiled with debugfs support or when it isn't mounted.

Now, the tool prints detailed error messages:

$ perf trace
Error:	Unable to find debugfs
Hint:	Was your kernel was compiled with debugfs support?
Hint:	Is the debugfs filesystem mounted?
Hint:	Try 'sudo mount -t debugfs nodev /sys/kernel/debug'

$ perf trace
Error:	No permissions to read /sys/kernel/debug//tracing/events/raw_syscalls
Hint:	Try 'sudo mount -o remount,mode=755 /sys/kernel/debug/'
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1380863851-14460-1-git-send-email-artagnon@gmail.com
[ Added ready to use commands to fix the issues as extra hints, use the
  current debugfs mount point when reporting permission error, use
  strerror_r instead of the deprecated sys_errlist, as reported by David Ahern ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull watchdog fixes from Wim Van Sebroeck:
 "This will fix a deadlock on the ts72xx_wdt driver, fix bitmasks in the
  kempld_wdt driver and fix a section mismatch in the sunxi_wdt driver"

* git://www.linux-watchdog.org/linux-watchdog:
  watchdog: sunxi: Fix section mismatch
  watchdog: kempld_wdt: Fix bit mask definition
  watchdog: ts72xx_wdt: locking bug in ioctl

This driver has a section mismatch, for probe and remove functions,
leading to the following warning during the compilation.

WARNING: drivers/watchdog/built-in.o(.data+0x24): Section mismatch in
reference from the variable sunxi_wdt_driver to the function
.init.text:sunxi_wdt_probe()
The variable sunxi_wdt_driver references
the function __init sunxi_wdt_probe()
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

STAGE_CFG bits are defined as [5:4] bits. However, '(((x) & 0x30) << 4)'
handles [9:8] bits. Thus, it should be fixed in order to handle
[5:4] bits.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Calling the WDIOC_GETSTATUS & WDIOC_GETBOOTSTATUS and twice will cause a
interruptible deadlock.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Pull ARM SoC fixes from Olof Johansson:
 "A small batch of fixes this week, mostly OMAP related.  Nothing stands
  out as particularly controversial.

  Also a fix for a 3.12-rc1 timer regression for Exynos platforms,
  including the Chromebooks"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: exynos: dts: Update 5250 arch timer node with clock frequency
  ARM: OMAP2: RX-51: Add missing max_current to rx51_lp5523_led_config
  ARM: mach-omap2: board-generic: fix undefined symbol
  ARM: dts: Fix pinctrl mask for omap3
  ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree
  ARM: OMAP2: gpmc-onenand: fix sync mode setup with DT

Without the "clock-frequency" property in arch timer node, could able
to see the below crash dump.

[<c0014e28>] (unwind_backtrace+0x0/0xf4) from [<c0011808>] (show_stack+0x10/0x14)
[<c0011808>] (show_stack+0x10/0x14) from [<c036ac1c>] (dump_stack+0x7c/0xb0)
[<c036ac1c>] (dump_stack+0x7c/0xb0) from [<c01ab760>] (Ldiv0_64+0x8/0x18)
[<c01ab760>] (Ldiv0_64+0x8/0x18) from [<c0062f60>] (clockevents_config.part.2+0x1c/0x74)
[<c0062f60>] (clockevents_config.part.2+0x1c/0x74) from [<c0062fd8>] (clockevents_config_and_register+0x20/0x2c)
[<c0062fd8>] (clockevents_config_and_register+0x20/0x2c) from [<c02b8e8c>] (arch_timer_setup+0xa8/0x134)
[<c02b8e8c>] (arch_timer_setup+0xa8/0x134) from [<c04b47b4>] (arch_timer_init+0x1f4/0x24c)
[<c04b47b4>] (arch_timer_init+0x1f4/0x24c) from [<c04b40d8>] (clocksource_of_init+0x34/0x58)
[<c04b40d8>] (clocksource_of_init+0x34/0x58) from [<c049ed8c>] (time_init+0x20/0x2c)
[<c049ed8c>] (time_init+0x20/0x2c) from [<c049b95c>] (start_kernel+0x1e0/0x39c)

THis is because the Exynos u-boot, for example on the Chromebooks, doesn't set
up the CNTFRQ register as expected by arch_timer. Instead, we have to specify
the frequency in the device tree like this.
Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com>
[olof: Changed subject, added comment, elaborated on commit message]
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'fixes-against-v3.12-rc3-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

From Tony Lindgren:

Few fixes for omap3 related hangs and errors that people have
noticed now that people are actually using the device tree
based booting for omap3.

Also one regression fix for timer compile for dra7xx when
omap5 is not selected, and a LED regression fix for n900.

* tag 'fixes-against-v3.12-rc3-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2: RX-51: Add missing max_current to rx51_lp5523_led_config
  ARM: mach-omap2: board-generic: fix undefined symbol
  ARM: dts: Fix pinctrl mask for omap3
  ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree
  ARM: OMAP2: gpmc-onenand: fix sync mode setup with DT
Signed-off-by: Olof Johansson <olof@lixom.net>

Pull parisc fixes from Helge Deller:
 "This patchset includes a bugfix to prevent a kernel crash when memory
  in page zero is accessed by the kernel itself, e.g.  via
  probe_kernel_read().

  Furthermore we now export flush_cache_page() which is needed
  (indirectly) by the lustre filesystem.  The other patches remove
  unused functions and optimizes the page fault handler to only evaluate
  variables if needed, which again protects against possible kernel
  crashes"

* 'parisc-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: let probe_kernel_read() capture access to page zero
  parisc: optimize variable initialization in do_page_fault
  parisc: fix interruption handler to respect pagefault_disable()
  parisc: mark parisc_terminate() noreturn and cold.
  parisc: remove unused syscall_ipi() function.
  parisc: kill SMP single function call interrupt
  parisc: Export flush_cache_page() (needed by lustre)

Pull slave-dmaengine fixes from Vinod Koul:
 "Another week, time to send another fixes request taking time out of
  extended weekend for the festivities in this part of the world.

  We have two fixes from Sergei for rcar driver and one fixing memory
  leak of edma driver by Geyslan"

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  dma: edma.c: remove edma_desc leakage
  rcar-hpbdma: add parameter to set_slave() method
  rcar-hpbdma: remove shdma_free_irq() calls

Signed-off-by: Helge Deller <deller@gmx.de>