- 16 Feb, 2018 14 commits
-
-
Jiri Olsa authored
Adding check on failed attempt to parse the address and skip the line parsing early in that case. The address can be replaced with '(null)' string in case user don't have enough permissions, like: $ cat /proc/kallsyms (null) A irq_stack_union (null) A __per_cpu_start ... Signed-off-by:Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180215122635.24029-2-jolsa@kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
yuzhoujian authored
Introduce a new option to print counts after N milliseconds and update 'perf stat' documentation accordingly. Show below is the output of the new option for perf stat. $ perf stat --time 2000 -e cycles -a Performance counter stats for 'system wide': 157,260,423 cycles 2.003060766 seconds time elapsed We can print the count deltas after N milliseconds with this new introduced option. This option is not supported with "-I" option. In addition, according to Kangliang's patch(19afd104), the monitoring overhead for system-wide core event could be very high if the interval-print parameter was below 100ms, and the limitation value is 10ms. So the same warning will be displayed when the time is set between 10ms to 100ms, and the minimal time is limited to 10ms. Users can make a decision according to their spcific cases. Committer notes: This actually stops the workload after the specified time, then prints the counts. So I renamed the option to --timeout and updated the documentation to state that it will not just print the counts after the specified time, but will really stop the 'perf stat' session and print the counts. The rename from 'time' to 'timeout' also fixes the build in systems where 'time' is used by glibc and can't be used as a name of a variable, such as centos:5 and centos:6. Changes since v3: - none. Changes since v2: - modify the time check in __run_perf_stat func to keep some consistency with the workload case. - add the warning when the time is set between 10ms to 100ms. - add the pr_err when the time is set below 10ms. Changes since v1: - none. Signed-off-by:yuzhoujian <yuzhoujian@didichuxing.com> Acked-by:
-
yuzhoujian authored
Introduce a new option to print counts for fixed number of times and update 'perf stat' documentation accordingly. Show below is the output of the new option for perf stat. $ perf stat -I 1000 --interval-count 2 -e cycles -a # time counts unit events 1.002827089 93,884,870 cycles 2.004231506 56,573,446 cycles We can just print the counts for several times with this newly introduced option. The usage of it is a little like 'vmstat', and it should be used together with "-I" option. $ vmstat -n 1 2 procs ---------memory-------------- --swap- ----io-- -system-- ------cpu--- r b swpd free buff cache si so bi bo in cs us sy id wa st 0 0 0 78270544 547484 51732076 0 0 0 20 1 1 1 0 99 0 0 0 0 0 78270512 547484 51732080 0 0 0 16 477 1555 0 0 100 0 0 Changes since v3: - merge interval_count check and times check to one line. - fix the wrong indent in stat.h - use stat_config.times instead of 'times' in cmd_stat function. Changes since v2: - none. Changes since v1: - change the name of the new option "times-print" to "interval-count". - keep the new option interval specifically. Signed-off-by: -
Jiri Olsa authored
Add support to display group output for if non grouped events are detected and user forces --group option. Now for non-group events recorded like: $ perf record -e 'cycles,instructions' ls you can still get group output by using --group option in report: $ perf report --group --stdio ... # Overhead Command Shared Object Symbol # ................ ....... ................ ...................... # 17.67% 0.00% ls libc-2.25.so [.] _IO_do_write@@GLIB 15.59% 25.94% ls ls [.] calculate_columns 15.41% 31.35% ls libc-2.25.so [.] __strcoll_l ... Committer note: We should improve on this by making sure that the first line states that this is not a group, but since the user doesn't have to force group view when really using grouped events (e.g. '{cycles,instructions}'), the user better know what is being done... Requested-by:Stephane Eranian <eranian@google.com> Signed-off-by:
-
Jiri Olsa authored
If we have the time in, keep the events in time order. Committer notes: Trying to be more verbose, what actual effect this will have in this particular case? Before and after this patch shows the artifacts: --- /tmp/before 2018-02-06 15:40:29.536411625 -0300 +++ /tmp/after 2018-02-06 15:40:51.963403599 -0300 @@ -5,34 +5,34 @@ 2540 2540 1818 | gnome-terminal- 3489 3489 2540 | bash 32433 32433 3489 | perf - 32434 32434 32433 | perf + 32434 32434 32433 | make 32441 32441 32434 | make 32514 32514 32441 | make 511 511 32514 | sh - 512 512 511 | sh + 512 512 511 | install <SNIP> We don't have 'perf' calling 'perf' calling 'make', etc, the second 'perf' actually is 'make', i.e. there was reordering of the relevant PERF_RECORD_COMM and PERF_RECORD_FORK records. Ditto for sh/install later on. Look for FORK and COMM meta events, for those tids: # perf report -D | egrep 'PERF_RECORD_(FORK|COMM)' | egrep '3243[34]' 0 14774650990679 0x1a3cd8 [0x38]: PERF_RECORD_FORK(32433:32433):(3489:3489) 1 14774652080381 0x1d6568 [0x30]: PERF_RECORD_COMM exec: perf:32433/32433 1 14774742473340 0x1dbb48 [0x38]: PERF_RECORD_FORK(32434:32434):(32433:32433) 0 14774752005779 0x1a4af8 [0x30]: PERF_RECORD_COMM exec: make:32434/32434 0 14774753997960 0x1a5578 [0x38]: PERF_RECORD_FORK(32435:32435):(32434:32434) 0 14774756070782 0x1a5618 [0x38]: PERF_RECORD_FORK(32438:32438):(32434:32434) 0 14774757772939 0x1a5680 [0x38]: PERF_RECORD_FORK(32440:32440):(32434:32434) 0 14774758230600 0x1a56e8 [0x38]: PERF_RECORD_FORK(32441:32441):(32434:32434) # First column is the cpu, second is the timestamp. So they are on different CPUs, thus ring buffers, and when we don't use the ordered_events class, we end up mixing that up, use it to take advantage of the PERF_RECORD_FINISHED_ROUND meta events to go on ordering the events using the PERF_SAMPLE_TIME present in the PERF_RECORD_{FORK,COMM,EXIT,SAMPLE,etc} records in the ring buffer. Signed-off-by: -
Jiri Olsa authored
In commit 2f15bd8c ("perf tools: Fix "Command" sort_entry's cmp and collapse function") we switched from pointer to string comparison. But failed to remove related comments. Removing them and adding another one to warn before pointer comparison in here. Signed-off-by:
-
Jiri Olsa authored
When we strip the perf binary, dwarf unwind test stop to work. The reason is that strip will remove static function symbols, which we need to check for unwind. This change will keep this test working in cases where the global symbols are put into dynamic symbol table, which is the case on x86. It still won't work on powerpc. Making those 5 local functions global, and adding 'test_dwarf_unwind__' to their names. Committer testing: Before: # perf test dwarf 58: DWARF unwind : Ok # strip ~/bin/perf # perf test dwarf 58: DWARF unwind : FAILED! # perf test -v dwarf 58: DWARF unwind : --- start --- test child forked, pid 6590 unwind: thread map already set, dso=/home/acme/bin/perf <SNIP> unwind: access_mem addr 0x7ffce6c48098 val 48563f, offset 1144 unwind: test__dwarf_unwind:ip = 0x4a54e5 (0xa54e5) got: test__dwarf_unwind 0xa54e5, expecting test__dwarf_unwind unwind: '':ip = 0x4a50bb (0xa50bb) failed: got unresolved address 0xa50bb unwind failed test child finished with -1 ---- end ---- DWARF unwind: FAILED! # After: # perf test dwarf 58: DWARF unwind : Ok # strip ~/bin/perf # perf test dwarf 58: DWARF unwind : Ok # # perf test -v dwarf 58: DWARF unwind : --- start --- test child forked, pid 7219 unwind: thread map already set, dso=/home/acme/bin/perf <SNIP> unwind: access_mem addr 0x7fff007da2c8 val 48575f, offset 1144 unwind: test__arch_unwind_sample:ip = 0x589044 (0x189044) got: test__arch_unwind_sample 0x189044, expecting test__arch_unwind_sample unwind: test_dwarf_unwind__thread:ip = 0x4a52f7 (0xa52f7) got: test_dwarf_unwind__thread 0xa52f7, expecting test_dwarf_unwind__thread unwind: test_dwarf_unwind__compare:ip = 0x4a5468 (0xa5468) got: test_dwarf_unwind__compare 0xa5468, expecting test_dwarf_unwind__compare unwind: bsearch:ip = 0x7f6608ae94d8 (0x394d8) got: bsearch 0x394d8, expecting bsearch unwind: test_dwarf_unwind__krava_3:ip = 0x4a54d1 (0xa54d1) got: test_dwarf_unwind__krava_3 0xa54d1, expecting test_dwarf_unwind__krava_3 unwind: test_dwarf_unwind__krava_2:ip = 0x4a550b (0xa550b) got: test_dwarf_unwind__krava_2 0xa550b, expecting test_dwarf_unwind__krava_2 unwind: test_dwarf_unwind__krava_1:ip = 0x4a554b (0xa554b) got: test_dwarf_unwind__krava_1 0xa554b, expecting test_dwarf_unwind__krava_1 unwind: test__dwarf_unwind:ip = 0x4a5605 (0xa5605) got: test__dwarf_unwind 0xa5605, expecting test__dwarf_unwind test child finished with 0 ---- end ---- DWARF unwind: Ok # Signed-off-by:
-
Jiri Olsa authored
Adding sysfs__read_xll function to be able to read sysfs files with hex numbers in, which do not have 0x prefix. Signed-off-by:
-
Jiri Olsa authored
Adding filename__read_xll function to be able to read files with hex numbers in, which do not have 0x prefix. Signed-off-by:
-
Jiri Olsa authored
Adding --show-round-event to display PERF_RECORD_FINISHED_ROUND events like: # perf script --show-round-events 2>/dev/null yes 8591 [002] 124177.397597: 18 cpu/mem-stores/P: ff... yes 8591 [002] 124177.397615: 1 cpu/mem-loads,ldlat=30/P: ff... PERF_RECORD_FINISHED_ROUND perf 10380 [001] 124177.397622: 6 cpu/mem-loads,ldlat=30/P: ff... PERF_RECORD_FINISHED_ROUND swapper 0 [000] 124177.400518: 88 cpu/mem-stores/P: ff... swapper 0 [000] 124177.400521: 88 cpu/mem-stores/P: ff... Signed-off-by: -
Jiri Olsa authored
There's no new-line after target-override warning, now: $ perf record -a --per-thread Warning: SYSTEM/CPU switch overriding PER-THREAD^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.705 MB perf.data (2939 samples) ] with patch: $ perf record -a --per-thread Warning: SYSTEM/CPU switch overriding PER-THREAD ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.705 MB perf.data (2939 samples) ] Signed-off-by:
-
Jessica Yu authored
Improve error handling when disarming ftrace-based kprobes. Like with arm_kprobe_ftrace(), propagate any errors from disarm_kprobe_ftrace() so that we do not disable/unregister kprobes that are still armed. In other words, unregister_kprobe() and disable_kprobe() should not report success if the kprobe could not be disarmed. disarm_all_kprobes() keeps its current behavior and attempts to disarm all kprobes. It returns the last encountered error and gives a warning if not all probes could be disarmed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by:
Petr Mladek <pmladek@suse.com> Signed-off-by:
Jessica Yu <jeyu@kernel.org> Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-3-jeyu@kernel.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org>
-
Jessica Yu authored
Improve error handling when arming ftrace-based kprobes. Specifically, if we fail to arm a ftrace-based kprobe, register_kprobe()/enable_kprobe() should report an error instead of success. Previously, this has lead to confusing situations where register_kprobe() would return 0 indicating success, but the kprobe would not be functional if ftrace registration during the kprobe arming process had failed. We should therefore take any errors returned by ftrace into account and propagate this error so that we do not register/enable kprobes that cannot be armed. This can happen if, for example, register_ftrace_function() finds an IPMODIFY conflict (since kprobe_ftrace_ops has this flag set) and returns an error. Such a conflict is possible since livepatches also set the IPMODIFY flag for their ftrace_ops. arm_all_kprobes() keeps its current behavior and attempts to arm all kprobes. It returns the last encountered error and gives a warning if not all probes could be armed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by:
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo-4.17-20180215' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/core fixes from Arnaldo Carvalho de Melo: - perf_mmap overwrite mode fixes/overhaul, prep work to get 'perf top' using it, making it bearable to use it in large core count systems such as Knights Landing/Mill Intel systems (Kan Liang) - s/390 now uses syscall.tbl, just like x86-64 to generate the syscall table id -> string tables used by 'perf trace' (Hendrik Brueckner) - Use strtoull() instead of home grown function (Andy Shevchenko) - Synchronize kernel ABI headers, v4.16-rc1 (Ingo Molnar) - Document missing 'perf data --force' option (Sangwon Hong) - Add perf vendor JSON metrics for ARM Cortex-A53 Processor (William Cohen) Signed-off-by:
-
- 15 Feb, 2018 26 commits
-
-
Hendrik Brueckner authored
This reverts commit f120c7b187e6c418238710b48723ce141f467543 which is no longer required with the introduction of a syscall.tbl on s390. Signed-off-by:
Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: linux-s390@vger.kernel.org LPU-Reference: 1518090470-2899-2-git-send-email-brueckner@linux.vnet.ibm.com Link: https://lkml.kernel.org/n/tip-q1lg0nvhha1tk39ri9aqalcb@git.kernel.orgSigned-off-by:
-
Hendrik Brueckner authored
Recently, s390 uses a syscall.tbl input file to generate its system call table and unistd uapi header files. Hence, update mksyscalltbl to use it as input to create the system table for perf. Signed-off-by:
-
Hendrik Brueckner authored
Grab a copy of the s390 system call table file introduced with commit 857f46bf "s390/syscalls: add system call table". Signed-off-by:
-
Ingo Molnar authored
Sync the following tooling headers with the latest kernel version: tools/arch/powerpc/include/uapi/asm/kvm.h tools/arch/x86/include/asm/cpufeatures.h tools/include/uapi/drm/i915_drm.h tools/include/uapi/linux/if_link.h tools/include/uapi/linux/kvm.h All the changes are new ABI additions which don't impact their use in existing tooling. Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: linux-kernel@vger.kernel.org Signed-off-by: -
Thomas Richter authored
On Intel test case trace+probe_libc_inet_pton.sh succeeds and the output is: [root@f27 perf]# ./perf trace --no-syscalls -e probe_libc:inet_pton/max-stack=3/ ping -6 -c 1 ::1 PING ::1(::1) 56 data bytes 64 bytes from ::1: icmp_seq=1 ttl=64 time=0.037 ms --- ::1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.037/0.037/0.037/0.000 ms 0.000 probe_libc:inet_pton:(7fa40ac618a0)) __GI___inet_pton (/usr/lib64/libc-2.26.so) getaddrinfo (/usr/lib64/libc-2.26.so) main (/usr/bin/ping) The kernel stack unwinder is used, it is specified implicitly as call-graph=fp (frame pointer). On s390x only dwarf is available for stack unwinding. It is also done in user space. This requires different parameter setup and result checking for s390x and Intel. This patch adds separate perf trace setup and result checking for Intel and s390x. On s390x specify this command line to get a call-graph and handle the different call graph result checking: [root@s35lp76 perf]# ./perf trace --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1 PING ::1(::1) 56 data bytes 64 bytes from ::1: icmp_seq=1 ttl=64 time=0.041 ms --- ::1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.041/0.041/0.041/0.000 ms 0.000 probe_libc:inet_pton:(3ffb9942060)) __GI___inet_pton (/usr/lib64/libc-2.26.so) gaih_inet (inlined) __GI_getaddrinfo (inlined) main (/usr/bin/ping) __libc_start_main (/usr/lib64/libc-2.26.so) _start (/usr/bin/ping) [root@s35lp76 perf]# Before: [root@s8360047 perf]# ./perf test -vv 58 58: probe libc's inet_pton & backtrace it with ping : --- start --- test child forked, pid 26349 PING ::1(::1) 56 data bytes 64 bytes from ::1: icmp_seq=1 ttl=64 time=0.079 ms --- ::1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.079/0.079/0.079/0.000 ms 0.000 probe_libc:inet_pton:(3ff925c2060)) test child finished with -1 ---- end ---- probe libc's inet_pton & backtrace it with ping: FAILED! [root@s8360047 perf]# After: [root@s35lp76 perf]# ./perf test -vv 57 57: probe libc's inet_pton & backtrace it with ping : --- start --- test child forked, pid 38708 PING ::1(::1) 56 data bytes 64 bytes from ::1: icmp_seq=1 ttl=64 time=0.038 ms --- ::1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.038/0.038/0.038/0.000 ms 0.000 probe_libc:inet_pton:(3ff87342060)) __GI___inet_pton (/usr/lib64/libc-2.26.so) gaih_inet (inlined) __GI_getaddrinfo (inlined) main (/usr/bin/ping) __libc_start_main (/usr/lib64/libc-2.26.so) _start (/usr/bin/ping) test child finished with 0 ---- end ---- probe libc's inet_pton & backtrace it with ping: Ok [root@s35lp76 perf]# On Intel the test case runs unchanged and succeeds. Signed-off-by:Thomas Richter <tmricht@linux.vnet.ibm.com> Reviewed-by:
-
Sangwon Hong authored
Add the --force option to the man page. Signed-off-by:
Sangwon Hong <qpakzk@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Taeung Song <treeze.taeung@gmail.com> Link: http://lkml.kernel.org/r/1517831315-31490-1-git-send-email-qpakzk@gmail.comSigned-off-by:
-
Andy Shevchenko authored
Instead of home grown function let's use what library provides us. Signed-off-by:
Andriy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
-
Kan Liang authored
The latency of perf_top__mmap_read() should be lower than refresh time. If not, give some hints to reduce the latency. Signed-off-by:
Kan Liang <kan.liang@intel.com> Acked-by:
-
Kan Liang authored
perf_top__mmap_read() has a severe performance issue in the Knights Landing/Mill platform, when monitoring heavy load systems. It costs several minutes to finish, which is unacceptable. Currently, 'perf top' uses the non overwrite mode. For non overwrite mode, it tries to read everything in the ringbuffer and doesn't pause it. Once there are lots of samples delivered persistently, the processing time could be very long. Also, the latest samples could be lost when the ringbuffer is full. For overwrite mode, it takes a snapshot for the system by pausing the ringbuffer, which could significantly reduce the processing time. Also, the overwrite mode always keep the latest samples. Considering the real time requirement for 'perf top', the overwrite mode is more suitable for it. Actually, 'perf top' was overwrite mode. It is changed to non overwrite mode since commit 93fc64f1 ("perf top: Switch to non overwrite mode"). It's better to change it back to overwrite mode by default. For the kernel which doesn't support overwrite mode, it will fall back to non overwrite mode. There would be some records lost in overwrite mode because of pausing the ringbuffer. It has little impact for the accuracy of the snapshot and can be tolerated. For overwrite mode, unconditionally wait 100 ms before each snapshot. It also reduces the overhead caused by pausing ringbuffer, especially on light load system. Signed-off-by:
-
Kan Liang authored
There would be some records lost in overwrite mode because of pausing the ringbuffer. It has little impact for the accuracy of the snapshot and could be tolerated by 'perf top'. Remove the lost events checking. Signed-off-by:
-
Kan Liang authored
For overwrite mode, the ringbuffer will be paused. The event lost is expected. It needs a way to notify the browser not print the warning. It will be used later for perf top to disable lost event warning in overwrite mode. There is no behavior change for now. Signed-off-by:
-
Kan Liang authored
Switch to non-overwrite mode if kernel doesnot support overwrite ringbuffer. It's only effect when overwrite mode is supported. No change to current behavior. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
As tools may need to adjust to missing features, as 'perf top' will, in the next csets, to cope with a missing 'write_backward' feature. Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-jelngl9q1ooaizvkcput9tic@git.kernel.orgSigned-off-by:
-
Kan Liang authored
Per-event overwrite term is not forbidden in 'perf top', which can bring problems. Because 'perf top' only support non-overwrite mode now. Add new rules and check regarding to overwrite term for 'perf top'. - All events either have same per-event term or don't have per-event mode setting. Otherwise, it will error out. - Per-event overwrite term should be consistent as opts->overwrite. If not, updating the opts->overwrite according to per-event term. Make it possible to support either non-overwrite or overwrite mode. The overwrite mode is forbidden now, which will be removed when the overwrite mode is supported later. Signed-off-by:
-
Kan Liang authored
Discards perf_mmap__read_backward() and perf_mmap__read_catchup(). No tools use them. There are tools still use perf_mmap__read_forward(). Keep it, but add comments to point to the new interface for future use. Signed-off-by:
-
Kan Liang authored
Use the new perf_mmap__read_* interfaces for overwrite ringbuffer test. Commiter notes: Testing: [root@seventh ~]# perf test -v backward 48: Read backward ring buffer : --- start --- test child forked, pid 8309 Using CPUID GenuineIntel-6-9E mmap size 1052672B mmap size 8192B Finished reading overwrite ring buffer: rewind test child finished with 0 ---- end ---- Read backward ring buffer: Ok [root@seventh ~]# Signed-off-by:
-
Kan Liang authored
Except for 'perf record', the other perf tools read events one by one from the ring buffer using perf_mmap__read_forward(). But it only supports non-overwrite mode. Introduce perf_mmap__read_event() to support both non-overwrite and overwrite mode. Usage: perf_mmap__read_init() while(event = perf_mmap__read_event()) { //process the event perf_mmap__consume() } perf_mmap__read_done() It cannot use perf_mmap__read_backward(). Because it always reads the stale buffer which is already processed. Furthermore, the forward and backward concepts have been removed. The perf_mmap__read_backward() will be replaced and discarded later. Signed-off-by: -
Kan Liang authored
The direction of overwrite mode is backward. The last perf_mmap__read() will set tail to map->prev. Need to correct the map->prev to head which is the end of next read. It will be used later. Signed-off-by:
-
Kan Liang authored
The 'start' and 'prev' variables are duplicates in perf_mmap__read(). Use 'map->prev' to replace 'start' in perf_mmap__read_*(). Suggested-by:
Wang Nan <wangnan0@huawei.com> Signed-off-by:
-
Kan Liang authored
Improve the readability by using meaningful enum (-EAGAIN, -EINVAL and 0) to replace the three returning states (0, -1 and 1). Suggested-by:
-
Kan Liang authored
The new function perf_mmap__read_init() is factored out from perf_mmap__push(). It is to calculate the 'start' and 'end' of the available data in ringbuffer. No functional change. Signed-off-by:
-
Kan Liang authored
The first assignment for 'start' and 'end' is redundant. Signed-off-by:
-
Kan Liang authored
In perf_mmap__push(), the 'size' need to be recalculated, otherwise the invalid data might be pushed to the record in overwrite mode. The issue is introduced by commit 7fb4b407 ("perf mmap: Don't discard prev in backward mode"). When the ring buffer is full in overwrite mode, backward_rb_find_range() will be called to recalculate the 'start' and 'end'. The 'size' needs to be recalculated accordingly. Unconditionally recalculate the 'size', not just for full ring buffer in overwrite mode. Because: - There is no harmful to recalculate the 'size' for other cases. - The code of calculating 'start' and 'end' will be factored out later. The new function does not need to return 'size'. Signed-off-by:
-
Kan Liang authored
perf_evlist__mmap_read_catchup() and perf_evlist__mmap_read_backward() are only for overwrite mode. But they read the evlist->mmap buffer which is for non-overwrite mode. It did not bring any serious problem yet, because there is no one use it. Remove the unused interfaces. Signed-off-by:
-
William Cohen authored
Add JSON metrics for ARM Cortex-A53 Processor. Unlike the Intel processors there isn't a script that automatically generated these files. The patch was manually generated from the documentation and the previous oprofile ARM Cortex ac53 event file patch I made. The relevant documentation is in the "12.9 Events" section of the ARM Cortex A53 MPCore Processor Revision: r0p4 Technical Reference Manual. The ARM Cortex A53 manual is available at: http://infocenter.arm.com/help/topic/com.arm.doc.ddi0500g/DDI0500G_cortex_a53_trm.pdf Use that to look for additional information about the events. Signed-off-by:
William Cohen <wcohen@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180131032813.9564-1-wcohen@redhat.com [ Added references provided by William Cohen ] Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Misc fixes all across the map: - /proc/kcore vsyscall related fixes - LTO fix - build warning fix - CPU hotplug fix - Kconfig NR_CPUS cleanups - cpu_has() cleanups/robustification - .gitignore fix - memory-failure unmapping fix - UV platform fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm, mm/hwpoison: Don't unconditionally unmap kernel 1:1 pages x86/error_inject: Make just_return_func() globally visible x86/platform/UV: Fix GAM Range Table entries less than 1GB x86/build: Add arch/x86/tools/insn_decoder_test to .gitignore x86/smpboot: Fix uncore_pci_remove() indexing bug when hot-removing a physical CPU x86/mm/kcore: Add vsyscall page to /proc/kcore conditionally vfs/proc/kcore, x86/mm/kcore: Fix SMAP fault when dumping vsyscall user page x86/Kconfig: Further simplify the NR_CPUS config x86/Kconfig: Simplify NR_CPUS config x86/MCE: Fix build warning introduced by "x86: do not use print_symbol()" x86/cpufeature: Update _static_cpu_has() to use all named variables x86/cpufeature: Reindent _static_cpu_has()
-
