- 01 Dec, 2019 40 commits
-
-
Masahisa Kojima authored
[ Upstream commit 8e850f25 ] In ndo_stop, driver resets the netsec ethernet controller IP. When the netsec IP is reset, HW running mode turns to NRM mode and driver has to wait until this mode transition completes. But mode transition to NRM will not complete if the PHY is in normal operation state. Netsec IP requires PHY is in power down state when it is reset. This modification stops the PHY before resetting netsec. Together with this modification, phy_addr is stored in netsec_priv structure because ndev->phydev is not yet ready in ndo_init. Fixes: 533dd11a ("net: socionext: Add Synquacer NetSec driver") Signed-off-by:
Masahisa Kojima <masahisa.kojima@linaro.org> Signed-off-by:
Yoshitoyo Osaki <osaki.yoshitoyo@socionext.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Marek Szyprowski authored
[ Upstream commit efddff27 ] IRQ wake up support for MAX8997 driver was initially configured by respective property in pdata. However, after the driver conversion to device-tree, setting it was left as 'todo'. Nowadays most of other PMIC MFD drivers initialized from device-tree assume that they can be an irq wakeup source, so enable it also for MAX8997. This fixes support for wakeup from MAX8997 RTC alarm. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Andy Shevchenko authored
[ Upstream commit 9f8ddee1 ] Power button IRQ actually has a second level of interrupts to distinguish between UI and POWER buttons. Moreover, current implementation looks awkward in approach to handle second level IRQs by first level related IRQ chip. To address above issues, split power button IRQ to be chained as well. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
-
Fabio Estevam authored
[ Upstream commit 55143439 ] When trying to read any MC13892 ADC channel on a imx51-babbage board: The MC13892 PMIC shutdowns completely. After debugging this issue and comparing the MC13892 and MC13783 initializations done in the vendor kernel, it was noticed that the CHRGRAWDIV bit of the ADC0 register was not being set. This bit is set by default after power on, but the driver was clearing it. After setting this bit it is possible to read the ADC values correctly. Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Tested-by:
Chris Healy <cphealy@gmail.com> Signed-off-by:
-
Sapthagiri Baratam authored
[ Upstream commit 6b269a41 ] Don't call runtime_put_sync when clk32k_ref is ARIZONA_32KZ_MCLK2 as there is no corresponding runtime_get_sync call. MCLK1 is not in the AoD power domain so if it is used as 32kHz clock source we need to hold a runtime PM reference to keep the device from going into low power mode. Fixes: cdd8da8c ("mfd: arizona: Add gating of external MCLKn clocks") Signed-off-by:
Sapthagiri Baratam <sapthagiri.baratam@cirrus.com> Acked-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by:
-
Ivan Khoronzhuk authored
[ Upstream commit 9737cc99 ] After flushing all mcast entries from the table, the ones contained in mc list of ndev are not restored when promisc mode is toggled off, because they are considered as synched with ALE, thus, in order to restore them after promisc mode - reset syncing info. This fix touches only switch mode devices, including single port boards like Beagle Bone. Fixes: commit 5da19489 ("net: ethernet: ti: cpsw: fix lost of mcast packets while rx_mode update") Signed-off-by:
Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Reviewed-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit c94f026f ] These functions are supposed to return one on failure and zero on success. Returning a zero here could cause uninitialized variable bugs in several of the callers. For example: drivers/scsi/cxgbi/cxgb4i/cxgb4i.c:1660 get_iscsi_dcb_priority() error: uninitialized symbol 'caps'. Fixes: 48365e48 ("qlcnic: dcb: Add support for CEE Netlink interface.") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit aeb5e02a ] Clang warns (trimmed for brevity): drivers/isdn/mISDN/tei.c:1193:7: warning: overflow converting case value to switch condition type (2147764552 to 18446744071562348872) [-Wswitch] case IMHOLD_L1: ^ drivers/isdn/mISDN/tei.c:1187:7: warning: overflow converting case value to switch condition type (2147764550 to 18446744071562348870) [-Wswitch] case IMCLEAR_L2: ^ 2 warnings generated. The root cause is that the _IOC macro can generate really large numbers, which don't find into type int. My research into how GCC and Clang are handling this at a low level didn't prove fruitful and surveying the kernel tree shows that aside from here and a few places in the scsi subsystem, everything that uses _IOC is at least of type 'unsigned int'. Make that change here because as nothing in this function cares about the signedness of the variable and it removes ambiguity, which is never good when dealing with compilers. While we're here, remove the unnecessary local variable ret (just return -EINVAL and 0 directly). Link: https://github.com/ClangBuiltLinux/linux/issues/67Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Chao Yu authored
[ Upstream commit 9149a5eb ] This patch changes codes as below: - use f2fs_set_inode_flags() to update i_flags atomically to avoid potential race. - synchronize F2FS_I(inode)->i_flags to inode->i_flags in f2fs_new_inode(). - use f2fs_set_inode_flags() to simply codes in f2fs_quota_{on,off}. Signed-off-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Chao Yu authored
[ Upstream commit 2baf0781 ] We need to drop PG_checked flag on page as well when we clear PG_uptodate flag, in order to avoid treating the page as GCing one later. Signed-off-by:
Weichao Guo <guoweichao@huawei.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit d1d2c290 ] The platform_get_resource() function doesn't return error pointers, it returns NULL on error. Fixes: 3d4e5184 ("thermal: armada: convert driver to syscon register accesses") Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by:
Eduardo Valentin <edubezval@gmail.com> Signed-off-by:
-
Vincent Chen authored
[ Upstream commit 827a4381 ] For 32bit, the upper 32-bit of phys_addr_t will be flushed to zero after AND with PAGE_MASK because the data type of PAGE_MASK is unsigned long. To fix this problem, the page alignment is done by subtracting the page offset instead of AND with PAGE_MASK. Signed-off-by:
Vincent Chen <vincentc@andestech.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Palmer Dabbelt <palmer@sifive.com> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit ef0f02fd ] Clang warns: drivers/rtc/rtc-s35390a.c:124:27: warning: implicit conversion from 'int' to 'char' changes value from 192 to -64 [-Wconstant-conversion] buf = S35390A_FLAG_RESET | S35390A_FLAG_24H; ~ ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~ 1 warning generated. Update buf to be an unsigned 8-bit integer, which matches the buf member in struct i2c_msg. https://github.com/ClangBuiltLinux/linux/issues/145Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Luis Henriques authored
[ Upstream commit bddff633 ] Current implementation of cephfs fallocate isn't correct as it doesn't really reserve the space in the cluster, which means that a subsequent call to a write may actually fail due to lack of space. In fact, it is currently possible to fallocate an amount space that is larger than the free space in the cluster. It has behaved this way since the initial commit ad7a60de ("ceph: punch hole support"). Since there's no easy solution to fix this at the moment, this patch simply removes support for all fallocate operations but FALLOC_FL_PUNCH_HOLE (which implies FALLOC_FL_KEEP_SIZE). Link: https://tracker.ceph.com/issues/36317Signed-off-by:
Luis Henriques <lhenriques@suse.com> Reviewed-by:
"Yan, Zheng" <zyan@redhat.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Yan, Zheng authored
[ Upstream commit c58f450b ] Signed-off-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
-
Quentin Monnet authored
[ Upstream commit fe8ecccc ] When trying to complete "bpftool map update" commands, the call to printf would print an error message that would show on the command line if no map is found to complete the command line. Fix it by making sure we have map ids to complete the line with, before we try to print something. Signed-off-by:
Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Quentin Monnet authored
[ Upstream commit c5fa5d60 ] The return value for each test in test_libbpf.sh is compared with if (( $? == 0 )) ; then ... This works well with bash, but not with dash, that /bin/sh is aliased to on some systems (such as Ubuntu). Let's replace this comparison by something that works on both shells. Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Nicholas Piggin authored
[ Upstream commit dd76ff5a ] Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Michael Ellerman authored
[ Upstream commit 81d1b54d ] When we have CONFIG_STRICT_KERNEL_RWX enabled, we want to split the linear mapping at the text/data boundary so we can map the kernel text read only. Currently we always use a small page at the text/data boundary, even when that's not necessary: Mapped 0x0000000000000000-0x0000000000e00000 with 2.00 MiB pages Mapped 0x0000000000e00000-0x0000000001000000 with 64.0 KiB pages Mapped 0x0000000001000000-0x0000000040000000 with 2.00 MiB pages This is because the check that the mapping crosses the __init_begin boundary is too strict, it also returns true when we map exactly up to the boundary. So fix it to check that the mapping would actually map past __init_begin, and with that we see: Mapped 0x0000000000000000-0x0000000040000000 with 2.00 MiB pages Mapped 0x0000000040000000-0x0000000100000000 with 1.00 GiB pages Signed-off-by:
-
Michael Ellerman authored
[ Upstream commit 3b5657ed ] When we have CONFIG_STRICT_KERNEL_RWX enabled, we want to split the linear mapping at the text/data boundary so we can map the kernel text read only. But the current logic uses small pages for the entire text section, regardless of whether a larger page size would fit. eg. with the boundary at 16M we could use 2M pages, but instead we use 64K pages up to the 16M boundary: Mapped 0x0000000000000000-0x0000000001000000 with 64.0 KiB pages Mapped 0x0000000001000000-0x0000000040000000 with 2.00 MiB pages Mapped 0x0000000040000000-0x0000000100000000 with 1.00 GiB pages This is because the test is checking if addr is < __init_begin and addr + mapping_size is >= _stext. But that is true for all pages between _stext and __init_begin. Instead what we want to check is if we are crossing the text/data boundary, which is at __init_begin. With that fixed we see: Mapped 0x0000000000000000-0x0000000000e00000 with 2.00 MiB pages Mapped 0x0000000000e00000-0x0000000001000000 with 64.0 KiB pages Mapped 0x0000000001000000-0x0000000040000000 with 2.00 MiB pages Mapped 0x0000000040000000-0x0000000100000000 with 1.00 GiB pages ie. we're correctly using 2MB pages below __init_begin, but we still drop down to 64K pages unnecessarily at the boundary. Signed-off-by:
-
Michael Ellerman authored
[ Upstream commit 5c6499b7 ] When we have CONFIG_STRICT_KERNEL_RWX enabled, we try to split the kernel linear (1:1) mapping so that the kernel text is in a separate page to kernel data, so we can mark the former read-only. We could achieve that just by always using 64K pages for the linear mapping, but we try to be smarter. Instead we use huge pages when possible, and only switch to smaller pages when necessary. However we have an off-by-one bug in that logic, which causes us to calculate the wrong boundary between text and data. For example with the end of the kernel text at 16M we see: radix-mmu: Mapped 0x0000000000000000-0x0000000001200000 with 64.0 KiB pages radix-mmu: Mapped 0x0000000001200000-0x0000000040000000 with 2.00 MiB pages radix-mmu: Mapped 0x0000000040000000-0x0000000100000000 with 1.00 GiB pages ie. we mapped from 0 to 18M with 64K pages, even though the boundary between text and data is at 16M. With the fix we see we're correctly hitting the 16M boundary: radix-mmu: Mapped 0x0000000000000000-0x0000000001000000 with 64.0 KiB pages radix-mmu: Mapped 0x0000000001000000-0x0000000040000000 with 2.00 MiB pages radix-mmu: Mapped 0x0000000040000000-0x0000000100000000 with 1.00 GiB pages Signed-off-by:
-
Aravinda Prasad authored
[ Upstream commit c6c26fb5 ] This patch exports the raw per-CPU VPA data via debugfs. A per-CPU file is created which exports the VPA data of that CPU to help debug some of the VPA related issues or to analyze the per-CPU VPA related statistics. v3: Removed offline CPU check. v2: Included offline CPU check and other review comments. Signed-off-by:
Aravinda Prasad <aravinda@linux.vnet.ibm.com> Signed-off-by:
-
Gustavo A. R. Silva authored
[ Upstream commit f4445bb9 ] There is a NULL pointer dereference in case *slot* happens to be NULL at lines 1053 and 1878: struct hisi_sas_cq *cq = &hisi_hba->cq[slot->dlvry_queue]; Notice that *slot* is being NULL checked at lines 1057 and 1881: if (slot), which implies it may be NULL. Fix this by placing the declaration and definition of variable cq, which contains the pointer dereference slot->dlvry_queue, after slot has been properly NULL checked. Addresses-Coverity-ID: 1474515 ("Dereference before null check") Addresses-Coverity-ID: 1474520 ("Dereference before null check") Fixes: 584f53fe ("scsi: hisi_sas: Fix the race between IO completion and timeout for SMP/internal IO") Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by:
Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
David S. Miller authored
[ Upstream commit 46b83064 ] If PARPORT_PC_FIFO is not enabled, do not provide the dma lock macros and lock definition. Otherwise: ./arch/sparc/include/asm/parport.h:24:24: warning: ‘dma_spin_lock’ defined but not used [-Wunused-variable] static DEFINE_SPINLOCK(dma_spin_lock); ^~~~~~~~~~~~~ ./include/linux/spinlock_types.h:81:39: note: in definition of macro ‘DEFINE_SPINLOCK’ #define DEFINE_SPINLOCK(x) spinlock_t x = __SPIN_LOCK_UNLOCKED(x) Signed-off-by:
-
Jithu Joseph authored
[ Upstream commit b61b8bba ] When the last CPU in an rdt_domain goes offline, its rdt_domain struct gets freed. Current pseudo-locking code is unaware of this scenario and tries to dereference the freed structure in a few places. Add checks to prevent pseudo-locking code from doing this. While further work is needed to seamlessly restore resource groups (not just pseudo-locking) to their configuration when the domain is brought back online, the immediate issue of invalid pointers is addressed here. Fixes: f4e80d67 ("x86/intel_rdt: Resctrl files reflect pseudo-locked information") Fixes: 443810fe ("x86/intel_rdt: Create debugfs files for pseudo-locking testing") Fixes: 746e0859 ("x86/intel_rdt: Create character device exposing pseudo-locked region") Fixes: 33dc3e41 ("x86/intel_rdt: Make CPU information accessible for pseudo-locked regions") Signed-off-by:
Jithu Joseph <jithu.joseph@intel.com> Signed-off-by:
Reinette Chatre <reinette.chatre@intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: fenghua.yu@intel.com Cc: tony.luck@intel.com Cc: gavin.hindman@intel.com Cc: hpa@zytor.com Link: https://lkml.kernel.org/r/231f742dbb7b00a31cc104416860e27dba6b072d.1539384145.git.reinette.chatre@intel.comSigned-off-by:
-
Vignesh R authored
[ Upstream commit b682cffa ] McSPI has 32 byte FIFO in Transmit-Receive mode. Current code tries to configuration FIFO watermark level for DMA trigger to be GCD of transfer length and max FIFO size which would mean trigger level may be set to 32 for transmit-receive mode if length is aligned. This does not work in case of SPI slave mode where FIFO always needs to have data ready whenever master starts the clock. With DMA trigger size of 32 there will be a small window during slave TX where DMA is still putting data into FIFO but master would have started clock for next byte, resulting in shifting out of stale data. Similarly, on Slave RX side there may be RX FIFO overflow Fix this by setting FIFO watermark for DMA trigger to word length. This means DMA is triggered as soon as FIFO has space for word length bytes and DMA would make sure FIFO is almost always full therefore improving FIFO occupancy in both master and slave mode. Signed-off-by:
Vignesh R <vigneshr@ti.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Christoph Hellwig authored
[ Upstream commit 80885468 ] All properly written drivers now have error handling in the dma_map_single / dma_map_page callers. As swiotlb_tbl_map_single already prints a useful warning when running out of swiotlb pool space we can also remove swiotlb_full entirely as it serves no purpose now. Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
-
Thomas Richter authored
[ Upstream commit ec0c0bb4 ] Return an error when the function debug_register() fails allocating the debug handle. Also remove the registered debug handle when the initialization fails later on. Signed-off-by:
Thomas Richter <tmricht@linux.ibm.com> Reviewed-by:
Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit 64b9d16e ] Clang warns: drivers/atm/zatm.c:513:7: error: while loop has empty body [-Werror,-Wempty-body] zwait; ^ drivers/atm/zatm.c:513:7: note: put the semicolon on a separate line to silence this warning Get rid of this warning by using an empty do-while loop. While we're at it, add parentheses to make it clear that this is a function-like macro. Link: https://github.com/ClangBuiltLinux/linux/issues/42Suggested-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
J. Bruce Fields authored
[ Upstream commit 826799e6 ] Commits ffb6ca33 and e08ea3a9 prevent setting xprt_min_resvport greater than xprt_max_resvport, but may also break simple code that sets one parameter then the other, if the new range does not overlap the old. Also it looks racy to me, unless there's some serialization I'm not seeing. Granted it would probably require malicious privileged processes (unless there's a chance these might eventually be settable in unprivileged containers), but still it seems better not to let userspace panic the kernel. Simpler seems to be to allow setting the parameters to whatever you want but interpret xprt_min_resvport > xprt_max_resvport as the empty range. Fixes: ffb6ca33 "sunrpc: Prevent resvport min/max inversion..." Fixes: e08ea3a9 "sunrpc: Prevent rexvport min/max inversion..." Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit e732f448 ] Signed-off-by:
-
Peng Hao authored
[ Upstream commit 1bd70d2e ] FILE pointer variable f is opened but never closed. Signed-off-by:
Peng Hao <peng.hao2@zte.com.cn> Signed-off-by:
-
Heinz Mauelshagen authored
[ Upstream commit d857ad75 ] With raid4/5/6, journal device and write intent bitmap are mutually exclusive. Signed-off-by:
Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit cd305c74 ] sk->sk_wmem_queued is used to count the size of chunks in out queue while sk->sk_wmem_alloc is for counting the size of chunks has been sent. sctp is increasing both of them before enqueuing the chunks, and using sk->sk_wmem_alloc to check for writable space. However, sk_wmem_alloc is also increased by 1 for the skb allocked for sending in sctp_packet_transmit() but it will not wake up the waiters when sk_wmem_alloc is decreased in this skb's destructor. If msg size is equal to sk_sndbuf and sendmsg is waiting for sndbuf, the check 'msg_len <= sctp_wspace(asoc)' in sctp_wait_for_sndbuf() will keep waiting if there's a skb allocked in sctp_packet_transmit, and later even if this skb got freed, the waiting thread will never get waked up. This issue has been there since very beginning, so we change to use sk->sk_wmem_queued to check for writable space as sk_wmem_queued is not increased for the skb allocked for sending, also as TCP does. SOCK_SNDBUF_LOCK check is also removed here as it's for tx buf auto tuning which I will add in another patch. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit e325808c ] Currently the call to atoi is being passed a single char string that is not null terminated, so there is a potential read overrun along the stack when parsing for an integer value. Fix this by instead using a 2 char string that is initialized to all zeros to ensure that a 1 char read into the string is always terminated with a \0. Detected by cppcheck: "Invalid atoi() argument nr 1. A nul-terminated string is required." Fixes: 3391ba0e ("usbip: tools: Extract generic code to be shared with vudc backend") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Mattias Jacobsson authored
[ Upstream commit 09015855 ] Upon success the update_status handler returns a positive number corresponding to the number of bytes transferred by usb_control_msg. However the return code of the update_status handler should indicate if an error occurred(negative) or how many bytes of the user's input to sysfs that was consumed. Return code zero indicates all bytes were consumed. The bug can for example result in the update_status handler being called twice, the second time with only the "unconsumed" part of the user's input to sysfs. Effectively setting an incorrect brightness. Change the update_status handler to return zero for all successful transactions and forward usb_control_msg's error code upon failure. Signed-off-by:
Mattias Jacobsson <2pi@mok.nu> Signed-off-by:
-
Jon Derrick authored
[ Upstream commit dc8af3a8 ] The VMD removal path calls pci_stop_root_busi(), which tears down the pcie tree, including detaching all of the attached drivers. During driver detachment, devices may use pci_release_region() to release resources. This path relies on the resource being accessible in resource tree. By detaching the child domain from the parent resource domain prior to stopping the bus, we are preventing the list traversal from finding the resource to be freed. If we instead detach the resource after stopping the bus, we will have properly freed the resource and detaching is simply accounting at that point. Without this order, the resource is never freed and is orphaned on VMD removal, leading to a warning: [ 181.940162] Trying to free nonexistent resource <e5a10000-e5a13fff> Fixes: 2c2c5c5c ("x86/PCI: VMD: Attach VMD resources to parent domain's resource tree") Signed-off-by:
Jon Derrick <jonathan.derrick@intel.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by:
Keith Busch <keith.busch@intel.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
[ Upstream commit fc0c8b36 ] There's some antiquated debug output that's trying to do a hand-made hexdump and turning into horrible 1-byte-per-line output these days. Use print_hex_dump() instead Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Philipp Klocke authored
[ Upstream commit eb7ebfa3 ] Compiling with clang yields the following warning: sound/i2c/cs8427.c:140:31: warning: implicit conversion from 'int' to 'char' changes value from 160 to -96 [-Wconstant-conversion] data[0] = CS8427_REG_AUTOINC | CS8427_REG_CORU_DATABUF; ~ ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ Because CS8427_REG_AUTOINC is defined as 128, it is too big for a char field. So change data from char to unsigned char, that it can hold the value. This patch does not change the generated code. Signed-off-by:
Philipp Klocke <philipp97kl@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Ulf Hansson authored
[ Upstream commit 2c9b7f87 ] A caller of pm_genpd_init() that provides some states for the genpd via the ->states pointer in the struct generic_pm_domain, should also provide a governor. This because it's the job of the governor to pick a state that satisfies the constraints. Therefore, let's print a warning to inform the user about such bogus configuration and avoid to bail out, by instead picking the shallowest state before genpd invokes the ->power_off() callback. Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by:
Lina Iyer <ilina@codeaurora.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
