- 03 Oct, 2018 8 commits
-
-
Arnd Bergmann authored
The 'tiles' array is initialized to a constant pointers to constant strings, but the declaration is only half as constant: drivers/pinctrl/qcom/pinctrl-qcs404.c:1660:11: error: initialization discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers] drivers/pinctrl/qcom/pinctrl-sdm660.c:1417:11: error: initialization discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers] Let's make it more constant. Fixes: 22eb8301 ("pinctrl: qcom: Add qcs404 pinctrl driver") Fixes: a46d5e98 ("pinctrl: qcom: Support dispersed tiles") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
The .to_irq() function obviously takes the per-chip offset as parameter, not the global GPIO number. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Andy Shevchenko authored
The parameter 'community' had been spelled incorrectly. Fix it here. As a side effect it satisfies static checkers that issue the following warnings: drivers/pinctrl/intel/pinctrl-intel.c:845: warning: Function parameter or member 'community' not described in 'intel_gpio_to_pin' drivers/pinctrl/intel/pinctrl-intel.c:845: warning: Excess function parameter 'commmunity' description in 'intel_gpio_to_pin' Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Andy Shevchenko authored
Simple type conversion with no functional change implied. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Andy Shevchenko authored
Simple type conversion with no functional change implied. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Andy Shevchenko authored
Simple type conversion with no functional change implied. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Andy Shevchenko authored
Simple type conversion with no functional change implied. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Craig Tatlor authored
Add the binding for the TLMM pinctrl block found in the SDM660 platform. Signed-off-by: Craig Tatlor <ctatlor97@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
- 02 Oct, 2018 1 commit
-
-
Stephen Boyd authored
This code needs to select function #0, which is the first int in the array of functions, not the number 0 which may or may not be the function for "GPIO mode" per the enum mapping. We were getting lucky on SDM845, where this was tested, because the function 0 matched the enum value for "GPIO mode". On other platforms, e.g. MSM8996, the gpio enum value is the last one in the list so this code doesn't work and we see a warning at boot. Fix it by grabbing the first element out of the array of functions. Cc: Doug Anderson <dianders@chromium.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Niklas Cassel <niklas.cassel@linaro.org> Reported-by: Niklas Cassel <niklas.cassel@linaro.org> Fixes: 1de7ddb3 ("pinctrl: msm: Mux out gpio function with gpio_request()") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
- 01 Oct, 2018 3 commits
-
-
Yanjiang Jin authored
Some drivers, for example, QCOM's qdf2xxx, set groups[gpio].name only when gpio is valid, and leave invalid gpio names as null. If we want to access the sys node "pinconf-groups", pinctrl_get_group_selector() -> get_group_name() may return a null pointer if group_selector is invalid, then the below Kernel panic would happen since strcmp() uses this null pointer to do comparison. Unable to handle kernel NULL pointer dereference at ss 00000000 el:Internal error: Oops: 9600000[ 143.080279] SMP CPU: 19 PID: 2493 Comm: read_all Tainted: G O .aarch64 #1 Hardware name: HXT Semiconductor HXT REP-2 System PC is at strcmp+0x18/0x154 LR is at pinctrl_get_group_selector+0x6c/0xe8 Process read_all (pid: 2493, stack limit = Call trace: Exception stack strcmp+0x18/0x154 pin_config_group_get+0x64/0xd8 pinconf_generic_dump_one+0xd8/0x1c0 pinconf_generic_dump_pins+0x94/0xc8 pinconf_groups_show+0xb4/0x104 seq_read+0x178/0x464 full_proxy_read+0x6c/0xac __vfs_read+0x58/0x178 vfs_read+0x94/0x164 SyS_read+0x60/0xc0 __sys_trace_return+0x0/0x4 --[ end trace]-- Kernel panic - not syncing: Fatal exception Signed-off-by: Yanjiang Jin <yanjiang.jin@hxt-semitech.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
Merge tag 'sh-pfc-for-v4.20-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: sh-pfc: Updates for v4.20 (take two) - Add MSIOF pin groups on R-Car E3 and D3, - Add support for the new RZ/G1N (R8A7744) and RZ/G2E (R8A774C0) SoCs, - Add I2C4, DU0, QSPI0, SDHI2, and USB pin groups on RZ/G1C, - Convert to SPDX license identifiers, - Small cleanups.
-
Linus Walleij authored
This is the 4.19-rc6 release I needed to merge this in because of extensive conflicts in the MSM and Intel pin control drivers. I know how to resolve them, so let's do it like this. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
- 30 Sep, 2018 4 commits
-
-
Greg Kroah-Hartman authored
-
https://github.com/ojeda/linuxGreg Kroah-Hartman authored
Miguel writes: "A trivial fix for auxdisplay - MAINTAINERS reference fix for moved file Reported by Joe Perches" * tag 'auxdisplay-for-greg-v4.19-rc6' of https://github.com/ojeda/linux: MAINTAINERS: fix reference to moved drivers/{misc => auxdisplay}/panel.c
-
Greg Kroah-Hartman authored
Merge tag 'libnvdimm-fixes2-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Dan writes: "filesystem-dax for 4.19-rc6 Fix a deadlock in the new for 4.19 dax_lock_mapping_entry() routine." * tag 'libnvdimm-fixes2-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: dax: Fix deadlock in dax_lock_mapping_entry()
-
Miguel Ojeda authored
Commit 51c1e9b5 ("auxdisplay: Move panel.c to drivers/auxdisplay folder") moved the file, but the MAINTAINERS reference was not updated. Link: https://lore.kernel.org/lkml/20180928220131.31075-1-joe@perches.com/Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
-
- 29 Sep, 2018 12 commits
-
-
git://git.kernel.dk/linux-blockGreg Kroah-Hartman authored
Jens writes: "Block fixes for 4.19-rc6 A set of fixes that should go into this release. This pull request contains: - A fix (hopefully) for the persistent grants for xen-blkfront. A previous fix from this series wasn't complete, hence reverted, and this one should hopefully be it. (Boris Ostrovsky) - Fix for an elevator drain warning with SMR devices, which is triggered when you switch schedulers (Damien) - bcache deadlock fix (Guoju Fang) - Fix for the block unplug tracepoint, which has had the timer/explicit flag reverted since 4.11 (Ilya) - Fix a regression in this series where the blk-mq timeout hook is invoked with the RCU read lock held, hence preventing it from blocking (Keith) - NVMe pull from Christoph, with a single multipath fix (Susobhan Dey)" * tag 'for-linus-20180929' of git://git.kernel.dk/linux-block: xen/blkfront: correct purging of persistent grants Revert "xen/blkfront: When purging persistent grants, keep them in the buffer" blk-mq: I/O and timer unplugs are inverted in blktrace bcache: add separate workqueue for journal_write to avoid deadlock xen/blkfront: When purging persistent grants, keep them in the buffer block: fix deadline elevator drain for zoned block devices blk-mq: Allow blocking queue tag iter callbacks nvme: properly propagate errors in nvme_mpath_init
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipGreg Kroah-Hartman authored
Thomas writes: "A single fix for the AMD memory encryption boot code so it does not read random garbage instead of the cached encryption bit when a kexec kernel is allocated above the 32bit address limit." * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot: Fix kexec booting failure in the SEV bit detection code
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipGreg Kroah-Hartman authored
Thomas writes: "Three small fixes for clocksource drivers: - Proper error handling in the Atmel PIT driver - Add CLOCK_SOURCE_SUSPEND_NONSTOP for TI SoCs so suspend works again - Fix the next event function for Facebook Backpack-CMM BMC chips so usleep(100) doesnt sleep several milliseconds" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/timer-atmel-pit: Properly handle error cases clocksource/drivers/fttmr010: Fix set_next_event handler clocksource/drivers/ti-32k: Add CLOCK_SOURCE_SUSPEND_NONSTOP flag for non-am43 SoCs
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipGreg Kroah-Hartman authored
Thomas writes: "A single fix for a missing sanity check when a pinned event is tried to be read on the wrong CPU due to a legit event scheduling failure." * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Add sanity check to deal with pinned event failure
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmGreg Kroah-Hartman authored
Rafael writes: "Power management fix for 4.19-rc6 Fix incorrect __init and __exit annotations in the Qualcomm Kryo cpufreq driver (Nathan Chancellor)." * tag 'pm-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: qcom-kryo: Fix section annotations
-
Nathan Chancellor authored
There is currently a warning when building the Kryo cpufreq driver into the kernel image: WARNING: vmlinux.o(.text+0x8aa424): Section mismatch in reference from the function qcom_cpufreq_kryo_probe() to the function .init.text:qcom_cpufreq_kryo_get_msm_id() The function qcom_cpufreq_kryo_probe() references the function __init qcom_cpufreq_kryo_get_msm_id(). This is often because qcom_cpufreq_kryo_probe lacks a __init annotation or the annotation of qcom_cpufreq_kryo_get_msm_id is wrong. Remove the '__init' annotation from qcom_cpufreq_kryo_get_msm_id so that there is no more mismatch warning. Additionally, Nick noticed that the remove function was marked as '__init' when it should really be marked as '__exit'. Fixes: 46e2856b (cpufreq: Add Kryo CPU scaling driver) Fixes: 5ad7346b (cpufreq: kryo: Add module remove and exit) Reported-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: 4.18+ <stable@vger.kernel.org> # 4.18+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
git://git.infradead.org/users/hch/dma-mappingGreg Kroah-Hartman authored
Christoph writes: "dma mapping fix for 4.19-rc6 fix a missing Kconfig symbol for commits introduced in 4.19-rc" * tag 'dma-mapping-4.19-3' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: add the missing ARCH_HAS_SYNC_DMA_FOR_CPU_ALL declaration
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputGreg Kroah-Hartman authored
Dmitry writes: "Input updates for v4.19-rc5 Just a few driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: uinput - allow for max == min during input_absinfo validation Input: elantech - enable middle button of touchpad on ThinkPad P72 Input: atakbd - fix Atari CapsLock behaviour Input: atakbd - fix Atari keymap Input: egalax_ts - add system wakeup support Input: gpio-keys - fix a documentation index issue
-
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiGreg Kroah-Hartman authored
Mark writes: "spi: Fixes for v4.19 Quite a few fixes for the Renesas drivers in here, plus a fix for the Tegra driver and some documentation fixes for the recently added spi-mem code. The Tegra fix is relatively large but fairly straightforward and mechanical, it runs on probe so it's been reasonably well covered in -next testing." * tag 'spi-fix-v4.19-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: spi-mem: Move the DMA-able constraint doc to the kerneldoc header spi: spi-mem: Add missing description for data.nbytes field spi: rspi: Fix interrupted DMA transfers spi: rspi: Fix invalid SPI use during system suspend spi: sh-msiof: Fix handling of write value for SISTR register spi: sh-msiof: Fix invalid SPI use during system suspend spi: gpio: Fix copy-and-paste error spi: tegra20-slink: explicitly enable/disable clock
-
Greg Kroah-Hartman authored
Merge tag 'regulator-v4.19-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Mark writes: "regulator: Fixes for 4.19 A collection of fairly minor bug fixes here, a couple of driver specific ones plus two core fixes. There's one fix for the new suspend state code which fixes some confusion with constant values that are supposed to indicate noop operation and another fixing a race condition with the creation of sysfs files on new regulators." * tag 'regulator-v4.19-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: fix crash caused by null driver data regulator: Fix 'do-nothing' value for regulators without suspend state regulator: da9063: fix DT probing with constraints regulator: bd71837: Disable voltage monitoring for LDO3/4
-
https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxGreg Kroah-Hartman authored
Michael writes: "powerpc fixes for 4.19 #3 A reasonably big batch of fixes due to me being away for a few weeks. A fix for the TM emulation support on Power9, which could result in corrupting the guest r11 when running under KVM. Two fixes to the TM code which could lead to userspace GPR corruption if we take an SLB miss at exactly the wrong time. Our dynamic patching code had a bug that meant we could patch freed __init text, which could lead to corrupting userspace memory. csum_ipv6_magic() didn't work on little endian platforms since we optimised it recently. A fix for an endian bug when reading a device tree property telling us how many storage keys the machine has available. Fix a crash seen on some configurations of PowerVM when migrating the partition from one machine to another. A fix for a regression in the setup of our CPU to NUMA node mapping in KVM guests. A fix to our selftest Makefiles to make them work since a recent change to the shared Makefile logic." * tag 'powerpc-4.19-3' of https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: selftests/powerpc: Fix Makefiles for headers_install change powerpc/numa: Use associativity if VPHN hcall is successful powerpc/tm: Avoid possible userspace r1 corruption on reclaim powerpc/tm: Fix userspace r13 corruption powerpc/pseries: Fix unitialized timer reset on migration powerpc/pkeys: Fix reading of ibm, processor-storage-keys property powerpc: fix csum_ipv6_magic() on little endian platforms powerpc/powernv/ioda2: Reduce upper limit for DMA window size (again) powerpc: Avoid code patching freed init sections KVM: PPC: Book3S HV: Fix guest r11 corruption with POWER9 TM workarounds
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlGreg Kroah-Hartman authored
Linus writes: "Pin control fixes for v4.19: - Fixes to x86 hardware: - AMD interrupt debounce issues - Faulty Intel cannonlake register offset - Revert pin translation IRQ locking" * tag 'pinctrl-v4.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: Revert "pinctrl: intel: Do pin translation when lock IRQ" pinctrl: cannonlake: Fix HOSTSW_OWN register offset of H variant pinctrl/amd: poll InterruptEnable bits in amd_gpio_irq_set_type
-
- 28 Sep, 2018 11 commits
-
-
Reinette Chatre authored
It is possible that a failure can occur during the scheduling of a pinned event. The initial portion of perf_event_read_local() contains the various error checks an event should pass before it can be considered valid. Ensure that the potential scheduling failure of a pinned event is checked for and have a credible error. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: fenghua.yu@intel.com Cc: tony.luck@intel.com Cc: acme@kernel.org Cc: gavin.hindman@intel.com Cc: jithu.joseph@intel.com Cc: dave.hansen@intel.com Cc: hpa@zytor.com Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/6486385d1f30336e9973b24c8c65f5079543d3d3.1537377064.git.reinette.chatre@intel.com
-
git://anongit.freedesktop.org/drm/drmGreg Kroah-Hartman authored
Dave writes: "drm fixes for 4.19-rc6 Looks like a pretty normal week for graphics, core: syncobj fix, panel link regression revert amd: suspend/resume fixes, EDID emulation fix mali-dp: NV12 writeback and vblank reset fixes etnaviv: DMA setup fix" * tag 'drm-fixes-2018-09-28' of git://anongit.freedesktop.org/drm/drm: drm/amd/display: Fix Edid emulation for linux drm/amd/display: Fix Vega10 lightup on S3 resume drm/amdgpu: Fix vce work queue was not cancelled when suspend Revert "drm/panel: Add device_link from panel device to DRM device" drm/syncobj: Don't leak fences when WAIT_FOR_SUBMIT is set drm/malidp: Fix writeback in NV12 drm: mali-dp: Call drm_crtc_vblank_reset on device init drm/etnaviv: add DMA configuration for etnaviv platform device
-
Greg Kroah-Hartman authored
Merge tag 'riscv-for-linus-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Palmer writes: "A Single RISC-V Update for 4.19-rc6 The Debian guys have been pushing on our port and found some unversioned symbols leaking into modules. This PR contains a single fix for that issue." * tag 'riscv-for-linus-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: RISC-V: include linux/ftrace.h in asm-prototypes.h
-
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/helgaas/pciGreg Kroah-Hartman authored
Bjorn writes: "PCI fixes: - Fix ACPI hotplug issue that causes black screen crash at boot (Mika Westerberg) - Fix DesignWare "scheduling while atomic" issues (Jisheng Zhang) - Add PPC contacts to MAINTAINERS for PCI core error handling (Bjorn Helgaas) - Sort Mobiveil MAINTAINERS entry (Lorenzo Pieralisi)" * tag 'pci-v4.19-fixes-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: ACPI / hotplug / PCI: Don't scan for non-hotplug bridges if slot is not bridge PCI: dwc: Fix scheduling while atomic issues MAINTAINERS: Move mobiveil PCI driver entry where it belongs MAINTAINERS: Update PPC contacts for PCI core error handling
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe fix from Christoph. * 'nvme-4.19' of git://git.infradead.org/nvme: nvme: properly propagate errors in nvme_mpath_init
-
Juergen Gross authored
Commit a46b5367 ("xen/blkfront: cleanup stale persistent grants") introduced a regression as purged persistent grants were not pu into the list of free grants again. Correct that. Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Jens Axboe authored
Fix didn't work for all cases, reverting to add a (hopefully) better fix. This reverts commit f151ba98. Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Geert Uytterhoeven authored
Renesas RZ/G SoCs are pin compatible with R-Car SoCs, but lack several automotive-specific peripherals. Currently pin groups and functions for automotive-specific peripherals are grouped in arrays named after the automative SoC part numbers. Rename them to "automotive" for clarity and consistency. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
-
Baolin Wang authored
It will be failed to select default or sleep state for pins hogged by the pin controller device, since we hadn't parsed pins configuration in device tree before registering the pin controller device. Thus we should move the device tree parsing function before registering the pin controller device. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Arnd Bergmann authored
mtk_eint_set_debounce and mtk_eint_find_irq are defined as stub functions in a header file, but without marking them as 'static inline', we get a copy for each file that includes the header: drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.o: In function `mtk_eint_set_debounce': pinctrl-mtk-common-v2.c:(.text+0x134): multiple definition of `mtk_eint_set_debounce' drivers/pinctrl/mediatek/pinctrl-moore.o:pinctrl-moore.c:(.text+0x7d0): first defined here drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.o: In function `mtk_eint_find_irq': pinctrl-mtk-common-v2.c:(.text+0x13c): multiple definition of `mtk_eint_find_irq' Fixes: e46df235 ("pinctrl: mediatek: refactor EINT related code for all MediaTek pinctrl can fit") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Michael Ellerman authored
Commit b2d35fa5 ("selftests: add headers_install to lib.mk") introduced a requirement that Makefiles more than one level below the selftests directory need to define top_srcdir, but it didn't update any of the powerpc Makefiles. This broke building all the powerpc selftests with eg: make[1]: Entering directory '/src/linux/tools/testing/selftests/powerpc' BUILD_TARGET=/src/linux/tools/testing/selftests/powerpc/alignment; mkdir -p $BUILD_TARGET; make OUTPUT=$BUILD_TARGET -k -C alignment all make[2]: Entering directory '/src/linux/tools/testing/selftests/powerpc/alignment' ../../lib.mk:20: ../../../../scripts/subarch.include: No such file or directory make[2]: *** No rule to make target '../../../../scripts/subarch.include'. make[2]: Failed to remake makefile '../../../../scripts/subarch.include'. Makefile:38: recipe for target 'alignment' failed Fix it by setting top_srcdir in the affected Makefiles. Fixes: b2d35fa5 ("selftests: add headers_install to lib.mk") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
- 27 Sep, 2018 1 commit
-
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
Just a few fixes for 4.19: - Couple of suspend/resume fixes - Fix EDID emulation with DC Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180927155418.2813-1-alexander.deucher@amd.com
-