- 25 Aug, 2020 24 commits
-
-
Igor Russkikh authored
Remove extra indent on some of adjacent declarations. Signed-off-by:
Igor Russkikh <irusskikh@marvell.com> Signed-off-by:
Alexander Lobakin <alobakin@marvell.com> Signed-off-by:
Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Igor Russkikh authored
Gather and push out full device dump to devlink. Device dump is the same as with `ethtool -d`, but now its generated exactly at the moment bad thing happens. Signed-off-by:
-
Igor Russkikh authored
Remove forcible recovery trigger and put it as a normal devlink callback. This allows user to enable/disable it via devlink health set pci/0000:03:00.0 reporter fw_fatal auto_recover false Signed-off-by:Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Igor Russkikh authored
Use devlink_health_report to push error indications. We implement this in qede via callback function to make it possible to reuse the same for other drivers sitting on top of qed in future. Signed-off-by:
-
Igor Russkikh authored
Here we declare health reporter ops (empty for now) and register these in qed probe and remove callbacks. This way we get devlink attached to all kind of qed* PCI device entities: networking or storage offload entity. Signed-off-by:
-
Igor Russkikh authored
Here we return existing fw & mfw versions, we also fetch device's serial number: ~$ sudo ~/iproute2/devlink/devlink dev info pci/0000:01:00.1: driver qed board.serial_number REE1915E44552 versions: running: fw.app 8.42.2.0 stored: fw.mgmt 8.52.10.0 MFW and FW are different firmwares on device. Management is a firmware responsible for link configuration and various control plane features. Its permanent and resides in NVM. Running FW (or fastpath FW) is an embedded microprogram implementing all the packet processing, offloads, etc. This FW is being loaded on each start by the driver from FW binary blob. The base device specific structure (qed_dev_info) was not directly available to the base driver before. Thus, here we create and store a private copy of this structure in qed_dev root object to access the data. Signed-off-by: -
Igor Russkikh authored
This patch replaces stubs in kconfig help entries with an actual description. Signed-off-by:
-
Igor Russkikh authored
Devlink instance lifecycle was linked to qed_dev object, that caused devlink to be recreated on each recovery. Changing it by making higher level driver (qede) responsible for its life. This way devlink now survives recoveries. qede now stores devlink structure pointer as a part of its device object, devlink private data contains a linkage structure, qed_devlink. Signed-off-by:
-
Igor Russkikh authored
We are extending devlink infrastructure, thus move the existing stuff into a new file qed_devlink.c Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by:
-
Christophe JAILLET authored
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'free_rx_resources()' and 'alloc_tx_resources()' (sge.c) GFP_KERNEL can be used because it is already used in these functions. Moreover, they can only be called from a .ndo_open function. So it is guarded by the 'rtnl_lock()', which is a mutex. While at it, a pr_err message in 'init_one()' has been updated accordingly (s/consistent/coherent). @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Misc updates This patch set includes various updates for mlxsw. Patches #1-#4 adjust the default burst size of packet trap policers to conform to Spectrum-{2,3} requirements. The corresponding selftest is also adjusted so that it could reliably pass on these platforms. Patch #5 adjusts a selftest so that it could pass with both old and new versions of mausezahn. Patch #6 significantly reduces the runtime of tc-police scale test by changing the preference and masks of the used tc filters. Patch #7 prevents the driver from trying to set invalid ethtool link modes. ==================== Signed-off-by: -
Danielle Ratson authored
The PTYS register is used to report and configure the port type and speed. Currently, internal bits in the register are used the same way other bits are used. Using the internal bits can cause bad parameter firmware errors. For example, trying to write to internal bit 25 returns: EMAD reg access failed (tid=53e2bffa00004310,reg_id=5004(ptys),type=write,status=7(bad parameter)) Remove the internal bits from the PTYS register, so that it is no longer possible to pass them to firmware. Signed-off-by:
Danielle Ratson <danieller@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
Currently, the test takes about 626 seconds to complete because of an inefficient use of the device's TCAM. Reduce the runtime to 202 seconds by inserting all the flower filters with the same preference and mask, but with a different key. In particular, this reduces the deletion of the qdisc (which triggers the deletion of all the filters) from 66 seconds to 0.2 seconds. This prevents various netlink requests from user space applications (e.g., systemd-networkd) from timing-out because RTNL is not held for too long anymore. Signed-off-by:
-
Danielle Ratson authored
Currently, mausezahn delay parameter in mirror_test() is specified with 'ms' units. mausezahn versions before 0.6.5 interpret 'ms' as seconds and therefore the tests that use mirror_test() take a very long time to complete. Resolve this by specifying 'msec' units. Signed-off-by:
Petr Machata <petrm@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
The current combination of rate and burst size does not adhere to Spectrum-{2,3} limitation which states that the minimum burst size should be 40% of the rate. Increase the burst size in order to honor above mentioned limitation and avoid intermittent failures of this test case on Spectrum-{2,3}. Remove the first sub-test case as the variation in number of received packets is simply too large to reliably test it. Signed-off-by: -
Ido Schimmel authored
The current combination of rate and burst size does not adhere to Spectrum-{2,3} limitation which states that the minimum burst size should be 40% of the rate. Increase the burst size in order to honor above mentioned limitation and avoid intermittent failures of this test case on Spectrum-{2,3}. Signed-off-by: -
Ido Schimmel authored
On Spectrum-{2,3} the required accuracy is +/-10%. Align the test to this requirement so that it can reliably pass on these platforms. Signed-off-by: -
Ido Schimmel authored
On the Spectrum-{2,3} ASICs the minimum burst size of the packet trap policers needs to be 40% of the configured rate. Otherwise, intermittent drops are observed even when the incoming packet rate is slightly lower than the configured policer rate. Adjust the burst size of the registered packet trap policers so that they do not violate above mentioned limitation. Signed-off-by: -
Christophe JAILLET authored
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'atl1e_setup_ring_resources()' (atl1e_main.c), 'atl1_setup_ring_resources()' (atl1.c) and 'atl2_setup_ring_resources()' (atl2.c) GFP_KERNEL can be used because it can be called from a .ndo_open. 'atl1_setup_ring_resources()' (atl1.c) can also be called from a '.set_ringparam' (see struct ethtool_ops) where sleep is also allowed. Both cases are protected by 'rtnl_lock()' which is a mutex. So these function can sleep. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by:
-
Christophe JAILLET authored
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'netdev_open()', GFP_ATOMIC must be used because it can be called from a .ndo_tx_timeout function. So this function can be called with the 'netif_tx_lock' acquired. The call chain is: --> tx_timeout (.ndo_tx_timeout function) --> netdev_open @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: -
Christophe JAILLET authored
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'typhoon_init_one()' GFP_KERNEL can be used because it is a probe function and no lock is acquired. When memory is allocated in 'typhoon_download_firmware()', GFP_ATOMIC must be used because it can be called from a .ndo_tx_timeout function. So this function can be called with the 'netif_tx_lock' acquired. The call chain is: --> typhoon_tx_timeout (.ndo_tx_timeout function) --> typhoon_start_runtime --> typhoon_download_firmware While at is, update some comments accordingly. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by:David Dillow <dave@thedillows.org> Signed-off-by:
-
Randy Dunlap authored
Drop duplicated words in /net/dccp/. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk> Cc: dccp@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Randy Dunlap authored
Drop duplicated words in net/netlink/. Signed-off-by:
-
Randy Dunlap authored
Drop duplicate words in comments in net/ipv4/. Signed-off-by:
-
- 24 Aug, 2020 15 commits
-
-
David S. Miller authored
Randy Dunlap says: ==================== net: sctp: delete duplicated words + other fixes Drop or fix repeated words in net/sctp/. ==================== Signed-off-by: -
Randy Dunlap authored
Drop the repeated word "an". Signed-off-by:
-
Randy Dunlap authored
Drop the repeated words "for", "that", and "a". Change "his" to "this". Signed-off-by:
-
Randy Dunlap authored
Drop the repeated words "of" and "that". Add some punctuation for readability. Signed-off-by:
-
Randy Dunlap authored
Drop the repeated word "the". Signed-off-by:
-
Randy Dunlap authored
Drop the repeated word "of". Signed-off-by:
-
Randy Dunlap authored
Drop the repeated word "the" and "now". Signed-off-by:
-
Randy Dunlap authored
Drop the repeated word "the" in two places. Signed-off-by:
-
Luke Hsiao authored
Currently, io_uring's recvmsg subscribes to both POLLERR and POLLIN. In the context of TCP tx zero-copy, this is inefficient since we are only reading the error queue and not using recvmsg to read POLLIN responses. This patch was tested by using a simple sending program to call recvmsg using io_uring with MSG_ERRQUEUE set and verifying with printks that the POLLIN is correctly unset when the msg flags are MSG_ERRQUEUE. Signed-off-by:
Arjun Roy <arjunroy@google.com> Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Luke Hsiao <lukehsiao@google.com> Signed-off-by:
-
Luke Hsiao authored
For TCP tx zero-copy, the kernel notifies the process of completions by queuing completion notifications on the socket error queue. This patch allows reading these notifications via recvmsg to support TCP tx zero-copy. Ancillary data was originally disallowed due to privilege escalation via io_uring's offloading of sendmsg() onto a kernel thread with kernel credentials (https://crbug.com/project-zero/1975). So, we must ensure that the socket type is one where the ancillary data types that are delivered on recvmsg are plain data (no file descriptors or values that are translated based on the identity of the calling process). This was tested by using io_uring to call recvmsg on the MSG_ERRQUEUE with tx zero-copy enabled. Before this patch, we received -EINVALID from this specific code path. After this patch, we could read tcp tx zero-copy completion notifications from the MSG_ERRQUEUE. Signed-off-by:
Jann Horn <jannh@google.com> Reviewed-by:
-
David S. Miller authored
Parav Pandit says: ==================== devlink fixes for port and reporter field access These series contains two small fixes of devlink. Patch-1 initializes port reporter fields early enough to avoid access before initialized error. Patch-2 protects port list lock during traversal. ==================== Signed-off-by: -
Parav Pandit authored
Cited patch in fixes tag misses to protect port list traversal while traversing per port reporter list. Protect it using devlink instance lock. Fixes: f4f54166 ("devlink: Implement devlink health reporters on per-port basis") Signed-off-by:
Parav Pandit <parav@nvidia.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
-
Parav Pandit authored
Cited patch in fixes tag initializes reporters_list and reporters_lock of a devlink port after devlink port is added to the list. Once port is added to the list, devlink_nl_cmd_health_reporter_get_dumpit() can access the uninitialized mutex and reporters list head. Fix it by initializing port reporters field before adding port to the list. Fixes: f4f54166 ("devlink: Implement devlink health reporters on per-port basis") Signed-off-by:
-
Thomas Falcon authored
The login response buffer is freed after it is received and parsed, but other functions in the driver still attempt to read it, such as when the device is opened, causing the Oops below. Store relevant information in the driver's private data structures and use those instead. BUG: Kernel NULL pointer dereference on read at 0x00000010 Faulting instruction address: 0xc00800000050a900 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: pseries_rng rng_core vmx_crypto gf128mul binfmt_misc ip_tables x_tables ibmvnic ibmveth crc32c_vpmsum autofs4 CPU: 7 PID: 759 Comm: NetworkManager Not tainted 5.9.0-rc1-00124-gd0a84e1f #14 NIP: c00800000050a900 LR: c00800000050a8f0 CTR: 00000000005b1904 REGS: c0000001ed746d20 TRAP: 0300 Not tainted (5.9.0-rc1-00124-gd0a84e1f) MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24428484 XER: 00000001 CFAR: c0000000000101b0 DAR: 0000000000000010 DSISR: 40000000 IRQMASK: 0 GPR00: c00800000050a8f0 c0000001ed746fb0 c008000000518e00 0000000000000000 GPR04: 00000000000000c0 0000000000000080 0003c366c60c4501 0000000000000352 GPR08: 000000000001f400 0000000000000010 0000000000000000 0000000000000000 GPR12: 0001cf0000000019 c00000001ec97680 00000001003dfd40 0000010008dbb22c GPR16: 0000000000000000 0000000000000000 0000000000000000 c000000000edb6c8 GPR20: c000000004e73e00 c000000004fd2448 c000000004e6d700 c000000004fd2448 GPR24: c000000004fd2400 c000000004a0cd20 c0000001ed961860 c0080000005029d8 GPR28: 0000000000000000 0000000000000003 c000000004a0c000 0000000000000000 NIP [c00800000050a900] init_resources+0x338/0xa00 [ibmvnic] LR [c00800000050a8f0] init_resources+0x328/0xa00 [ibmvnic] Call Trace: [c0000001ed746fb0] [c00800000050a8f0] init_resources+0x328/0xa00 [ibmvnic] (unreliable) [c0000001ed747090] [c00800000050b024] ibmvnic_open+0x5c/0x100 [ibmvnic] [c0000001ed747110] [c000000000bdcc0c] __dev_open+0x17c/0x250 [c0000001ed7471b0] [c000000000bdd1ec] __dev_change_flags+0x1dc/0x270 [c0000001ed747260] [c000000000bdd2bc] dev_change_flags+0x3c/0x90 [c0000001ed7472a0] [c000000000bf24b8] do_setlink+0x3b8/0x1280 [c0000001ed747450] [c000000000bf8cc8] __rtnl_newlink+0x5a8/0x980 [c0000001ed7478b0] [c000000000bf9110] rtnl_newlink+0x70/0xb0 [c0000001ed7478f0] [c000000000bf07c4] rtnetlink_rcv_msg+0x364/0x460 [c0000001ed747990] [c000000000c68b94] netlink_rcv_skb+0x84/0x1a0 [c0000001ed747a00] [c000000000bef758] rtnetlink_rcv+0x28/0x40 [c0000001ed747a20] [c000000000c68188] netlink_unicast+0x218/0x310 [c0000001ed747a80] [c000000000c6848c] netlink_sendmsg+0x20c/0x4e0 [c0000001ed747b20] [c000000000b9dc88] ____sys_sendmsg+0x158/0x360 [c0000001ed747bb0] [c000000000ba1c88] ___sys_sendmsg+0x98/0xf0 [c0000001ed747d10] [c000000000ba1db8] __sys_sendmsg+0x78/0x100 [c0000001ed747dc0] [c000000000033820] system_call_exception+0x160/0x280 [c0000001ed747e20] [c00000000000d740] system_call_common+0xf0/0x27c Instruction dump: 3be00000 38810068 b1410076 3941006a 93e10072 fbea0000 b1210068 4bff9915 eb9e0ca0 eabe0900 393c0010 3ab50048 <7fa04c2c> 7fba07b4 7b431764 7b4917a0 ---[ end trace fbc5949a28e103bd ]--- Fixes: f3ae59c0 ("ibmvnic: store RX and TX subCRQ handle array in ibmvnic_adapter struct") Signed-off-by:
Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by:
-
Taehee Yoo authored
Assign rtnl_link_ops->get_link_net() callback so that IFLA_LINK_NETNSID is added to rtnetlink messages. Test commands: ip netns add nst ip link add dummy0 type dummy ip link add ipvlan0 link dummy0 type ipvlan ip link set ipvlan0 netns nst ip netns exec nst ip link show ipvlan0 Result: ---Before--- 6: ipvlan0@if5: <BROADCAST,MULTICAST> ... link/ether 82:3a:78:ab:60:50 brd ff:ff:ff:ff:ff:ff ---After--- 12: ipvlan0@if11: <BROADCAST,MULTICAST> ... link/ether 42:b1:ad:57:4e:27 brd ff:ff:ff:ff:ff:ff link-netnsid 0 ~~~~~~~~~~~~~~ Signed-off-by:Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
- 23 Aug, 2020 1 commit
-
-
