- 22 Jul, 2015 13 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Don't use shared bluetooth antenna in iwlwifi driver for management frames, from Emmanuel Grumbach. 2) Fix device ID check in ath9k driver, from Felix Fietkau. 3) Off by one in xen-netback BUG checks, from Dan Carpenter. 4) Fix IFLA_VF_PORT netlink attribute validation, from Daniel Borkmann. 5) Fix races in setting peeked bit flag in SKBs during datagram receive. If it's shared we have to clone it otherwise the value can easily be corrupted. Fix from Herbert Xu. 6) Revert fec clock handling change, causes regressions. From Fabio Estevam. 7) Fix use after free in fq_codel and sfq packet schedulers, from WANG Cong. 8) ipvlan bug fixes (memory leaks, missing rcu_dereference_bh, etc.) from WANG Cong and Konstantin Khlebnikov. 9) Memory leak in act_bpf packet action, from Alexei Starovoitov. 10) ARM bpf JIT bug fixes from Nicolas Schichan. 11) Fix backwards compat of ANY_LAYOUT in virtio_net driver, from Michael S Tsirkin. 12) Destruction of bond with different ARP header types not handled correctly, fix from Nikolay Aleksandrov. 13) Revert GRO receive support in ipv6 SIT tunnel driver, causes regressions because the GRO packets created cannot be processed properly on the GSO side if we forward the frame. From Herbert Xu. 14) TCCR update race and other fixes to ravb driver from Sergei Shtylyov. 15) Fix SKB leaks in caif_queue_rcv_skb(), from Eric Dumazet. 16) Fix panics on packet scheduler filter replace, from Daniel Borkmann. 17) Make sure AF_PACKET sees properly IP headers in defragmented frames (via PACKET_FANOUT_FLAG_DEFRAG option), from Edward Hyunkoo Jee. 18) AF_NETLINK cannot hold mutex in RCU callback, fix from Florian Westphal. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (84 commits) ravb: fix ring memory allocation net: phy: dp83867: Fix warning check for setting the internal delay openvswitch: allocate nr_node_ids flow_stats instead of num_possible_nodes netlink: don't hold mutex in rcu callback when releasing mmapd ring ARM: net: fix vlan access instructions in ARM JIT. ARM: net: handle negative offsets in BPF JIT. ARM: net: fix condition for load_order > 0 when translating load instructions. tcp: suppress a division by zero warning drivers: net: cpsw: remove tx event processing in rx napi poll inet: frags: fix defragmented packet's IP header for af_packet net: mvneta: fix refilling for Rx DMA buffers stmmac: fix setting of driver data in stmmac_dvr_probe sched: cls_flow: fix panic on filter replace sched: cls_flower: fix panic on filter replace sched: cls_bpf: fix panic on filter replace net/mdio: fix mdio_bus_match for c45 PHY net: ratelimit warnings about dst entry refcount underflow or overflow caif: fix leaks and race in caif_queue_rcv_skb() qmi_wwan: add the second QMI/network interface for Sierra Wireless MC7305/MC7355 ravb: fix race updating TCCR ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull ARM64 fixes from Catalin Marinas: - arm64 build fix following the move of the thread_struct to the end of task_struct and the asm offsets becoming too large for the AArch64 ISA - preparatory patch for moving irq_data struct members (applied now to reduce dependency for the next merging window) * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: ARM64/irq: Use access helper irq_data_get_affinity_mask() arm64: switch_to: calculate cpu context pointer using separate register
-
Jiang Liu authored
This is a preparatory patch for moving irq_data struct members. Signed-off-by:
Jiang Liu <jiang.liu@linux.intel.com> Reviewed-by:
Hanjun Guo <hanjun.guo@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com>
-
Will Deacon authored
Commit 0c8c0f03 ("x86/fpu, sched: Dynamically allocate 'struct fpu'") moved the thread_struct to the bottom of task_struct. As a result, the offset is now too large to be used in an immediate add on arm64 with some kernel configs: arch/arm64/kernel/entry.S: Assembler messages: arch/arm64/kernel/entry.S:588: Error: immediate out of range arch/arm64/kernel/entry.S:597: Error: immediate out of range This patch calculates the offset using an additional register instead of an immediate offset. Fixes: 0c8c0f03 ("x86/fpu, sched: Dynamically allocate 'struct fpu'") Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Olof Johansson <olof@lixom.net> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by:
Will Deacon <will.deacon@arm.com> Tested-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com>
-
Sergei Shtylyov authored
The driver is written as if it can adapt to a low memory situation allocating less RX skbs and TX aligned buffers than the respective RX/TX ring sizes. In reality though the driver would malfunction in this case. Stop being overly smart and just fail in such situation -- this is achieved by moving the memory allocation from ravb_ring_format() to ravb_ring_init(). We leave dma_map_single() calls in place but make their failure non-fatal by marking the corresponding RX descriptors with zero data size which should prevent DMA to an invalid addresses. Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dan Murphy authored
Fix warning: logical ‘or’ of collectively exhaustive tests is always true Change the internal delay check from an 'or' condition to an 'and' condition. Reported-by:
David Binderman <dcb314@hotmail.com> Signed-off-by:
Dan Murphy <dmurphy@ti.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Chris J Arges authored
Some architectures like POWER can have a NUMA node_possible_map that contains sparse entries. This causes memory corruption with openvswitch since it allocates flow_cache with a multiple of num_possible_nodes() and assumes the node variable returned by for_each_node will index into flow->stats[node]. Use nr_node_ids to allocate a maximal sparse array instead of num_possible_nodes(). The crash was noticed after 3af229f2 was applied as it changed the node_possible_map to match node_online_map on boot. Fixes: 3af229f2Signed-off-by:
Chris J Arges <chris.j.arges@canonical.com> Acked-by:
Pravin B Shelar <pshelar@nicira.com> Acked-by:
Nishanth Aravamudan <nacc@linux.vnet.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Westphal authored
Kirill A. Shutemov says: This simple test-case trigers few locking asserts in kernel: int main(int argc, char **argv) { unsigned int block_size = 16 * 4096; struct nl_mmap_req req = { .nm_block_size = block_size, .nm_block_nr = 64, .nm_frame_size = 16384, .nm_frame_nr = 64 * block_size / 16384, }; unsigned int ring_size; int fd; fd = socket(AF_NETLINK, SOCK_RAW, NETLINK_GENERIC); if (setsockopt(fd, SOL_NETLINK, NETLINK_RX_RING, &req, sizeof(req)) < 0) exit(1); if (setsockopt(fd, SOL_NETLINK, NETLINK_TX_RING, &req, sizeof(req)) < 0) exit(1); ring_size = req.nm_block_nr * req.nm_block_size; mmap(NULL, 2 * ring_size, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0); return 0; } +++ exited with 0 +++ BUG: sleeping function called from invalid context at /home/kas/git/public/linux-mm/kernel/locking/mutex.c:616 in_atomic(): 1, irqs_disabled(): 0, pid: 1, name: init 3 locks held by init/1: #0: (reboot_mutex){+.+...}, at: [<ffffffff81080959>] SyS_reboot+0xa9/0x220 #1: ((reboot_notifier_list).rwsem){.+.+..}, at: [<ffffffff8107f379>] __blocking_notifier_call_chain+0x39/0x70 #2: (rcu_callback){......}, at: [<ffffffff810d32e0>] rcu_do_batch.isra.49+0x160/0x10c0 Preemption disabled at:[<ffffffff8145365f>] __delay+0xf/0x20 CPU: 1 PID: 1 Comm: init Not tainted 4.1.0-00009-gbddf4c4818e0 #253 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Debian-1.8.2-1 04/01/2014 ffff88017b3d8000 ffff88027bc03c38 ffffffff81929ceb 0000000000000102 0000000000000000 ffff88027bc03c68 ffffffff81085a9d 0000000000000002 ffffffff81ca2a20 0000000000000268 0000000000000000 ffff88027bc03c98 Call Trace: <IRQ> [<ffffffff81929ceb>] dump_stack+0x4f/0x7b [<ffffffff81085a9d>] ___might_sleep+0x16d/0x270 [<ffffffff81085bed>] __might_sleep+0x4d/0x90 [<ffffffff8192e96f>] mutex_lock_nested+0x2f/0x430 [<ffffffff81932fed>] ? _raw_spin_unlock_irqrestore+0x5d/0x80 [<ffffffff81464143>] ? __this_cpu_preempt_check+0x13/0x20 [<ffffffff8182fc3d>] netlink_set_ring+0x1ed/0x350 [<ffffffff8182e000>] ? netlink_undo_bind+0x70/0x70 [<ffffffff8182fe20>] netlink_sock_destruct+0x80/0x150 [<ffffffff817e484d>] __sk_free+0x1d/0x160 [<ffffffff817e49a9>] sk_free+0x19/0x20 [..] Cong Wang says: We can't hold mutex lock in a rcu callback, [..] Thomas Graf says: The socket should be dead at this point. It might be simpler to add a netlink_release_ring() function which doesn't require locking at all. Reported-by:
"Kirill A. Shutemov" <kirill@shutemov.name> Diagnosed-by:
Cong Wang <cwang@twopensource.com> Suggested-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Nicolas Schichan says: ==================== BPF JIT fixes for ARM These patches are fixing bugs in the ARM JIT and should probably find their way to a stable kernel. All 60 test_bpf tests in Linux 4.1 release are now passing OK (was 54 out of 60 before). ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nicolas Schichan authored
This makes BPF_ANC | SKF_AD_VLAN_TAG and BPF_ANC | SKF_AD_VLAN_TAG_PRESENT have the same behaviour as the in kernel VM and makes the test_bpf LD_VLAN_TAG and LD_VLAN_TAG_PRESENT tests pass. Signed-off-by:
Nicolas Schichan <nschichan@freebox.fr> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nicolas Schichan authored
Previously, the JIT would reject negative offsets known during code generation and mishandle negative offsets provided at runtime. Fix that by calling bpf_internal_load_pointer_neg_helper() appropriately in the jit_get_skb_{b,h,w} slow path helpers and by forcing the execution flow to the slow path helpers when the offset is negative. Signed-off-by:
Nicolas Schichan <nschichan@freebox.fr> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nicolas Schichan authored
To check whether the load should take the fast path or not, the code would check that (r_skb_hlen - load_order) is greater than the offset of the access using an "Unsigned higher or same" condition. For halfword accesses and an skb length of 1 at offset 0, that test is valid, as we end up comparing 0xffffffff(-1) and 0, so the fast path is taken and the filter allows the load to wrongly succeed. A similar issue exists for word loads at offset 0 and an skb length of less than 4. Fix that by using the condition "Signed greater than or equal" condition for the fast path code for load orders greater than 0. Signed-off-by:
Nicolas Schichan <nschichan@freebox.fr> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Andrew Morton reported following warning on one ARM build with gcc-4.4 : net/ipv4/inet_hashtables.c: In function 'inet_ehash_locks_alloc': net/ipv4/inet_hashtables.c:617: warning: division by zero Even guarded with a test on sizeof(spinlock_t), compiler does not like current construct on a !CONFIG_SMP build. Remove the warning by using a temporary variable. Fixes: 095dc8e0 ("tcp: fix/cleanup inet_ehash_locks_alloc()") Reported-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 21 Jul, 2015 22 commits
-
-
Linus Torvalds authored
This reverts commit a2673b6e. Kinglong Mee reports a memory leak with that patch, and Jan Kara confirms: "Thanks for report! You are right that my patch introduces a race between fsnotify kthread and fsnotify_destroy_group() which can result in leaking inotify event on group destruction. I haven't yet decided whether the right fix is not to queue events for dying notification group (as that is pointless anyway) or whether we should just fix the original problem differently... Whenever I look at fsnotify code mark handling I get lost in the maze of locks, lists, and subtle differences between how different notification systems handle notification marks :( I'll think about it over night" and after thinking about it, Jan says: "OK, I have looked into the code some more and I found another relatively simple way of fixing the original oops. It will be IMHO better than trying to fixup this issue which has more potential for breakage. I'll ask Linus to revert the fsnotify fix he already merged and send a new fix" Reported-by:
Kinglong Mee <kinglongmee@gmail.com> Requested-by:
Jan Kara <jack@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David S. Miller authored
Merge tag 'wireless-drivers-for-davem-2015-07-20' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== ath9k: * fix device ID check for AR956x iwlwifi: * bug fixes specific for 8000 series * fix a crash in time events * fix a crash in PCIe transport * fix BT Coex code that prevented association on certain devices (3160). * revert the new RBD allocation model because it introduced a bug when running on weak VM setups. * new device IDs ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control fixes from Linus Walleij: "Here are some overly ripe pin control fixes for the v4.2 series. They got delayed because of various crap commits and having to clean and rinse the patch stack a few times. Now they are however looking good. - some dead defines dropped from the Samsung driver, was targeted for -rc2 but got delayed - drop the strict mode from abx500, this was too strict - fix the R-Car sparse IRQs code to work as intended - fix the IRQ code for the pinctrl-single GPIO backend to not enforce threaded IRQs - clear the latched events/IRQs for the Broadcom BCM2835 driver - fix up debugfs for the Freescale imx1 driver - fix a typo bug in the Schmitt Trigger setup in the LPC18xx driver" * tag 'pinctrl-v4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: lpc18xx: fix schmitt trigger setup Subject: pinctrl: imx1-core: Fix debug output in .pin_config_set callback pinctrl: bcm2835: Clear the event latch register when disabling interrupts pinctrl: single: ensure pcs irq will not be forced threaded sh-pfc: fix sparse GPIOs for R-Car SoCs pinctrl: abx500: remove strict mode pinctrl: samsung: Remove old unused defines
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fsLinus Torvalds authored
Pull UDF fix from Jan Kara: "A fix for UDF corruption when certain disk-format feature is enabled" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: Don't corrupt unalloc spacetable when writing it
-
Linus Torvalds authored
Merge tag 'trace-v4.2-rc2-fix2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing sample code fix from Steven Rostedt: "He Kuang noticed that the sample code using the trace_event helper function __get_dynamic_array_len() is broken. This only changes the sample code, and I'm pushing this now instead of later because I don't want others using the broken code as an example when using it for real" * tag 'trace-v4.2-rc2-fix2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix sample output of dynamic arrays
-
Mugunthan V N authored
With commit c03abd84 ("net: ethernet: cpsw: don't requests IRQs we don't use") common isr and napi are separated into separate tx isr and rx isr/napi, but still in rx napi tx events are handled. So removing the tx event handling in rx napi. Signed-off-by:
Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Edward Hyunkoo Jee authored
When ip_frag_queue() computes positions, it assumes that the passed sk_buff does not contain L2 headers. However, when PACKET_FANOUT_FLAG_DEFRAG is used, IP reassembly functions can be called on outgoing packets that contain L2 headers. Also, IPv4 checksum is not corrected after reassembly. Fixes: 7736d33f ("packet: Add pre-defragmentation support for ipv4 fanouts.") Signed-off-by:
Edward Hyunkoo Jee <edjee@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Jerry Chu <hkchu@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Simon Guinot authored
With the actual code, if a memory allocation error happens while refilling a Rx descriptor, then the original Rx buffer is both passed to the networking stack (in a SKB) and let in the Rx ring. This leads to various kernel oops and crashes. As a fix, this patch moves Rx descriptor refilling ahead of building SKB with the associated Rx buffer. In case of a memory allocation failure, data is dropped and the original DMA buffer is put back into the Rx ring. Signed-off-by:
Simon Guinot <simon.guinot@sequanux.org> Fixes: c5aff182 ("net: mvneta: driver for Marvell Armada 370/XP network unit") Cc: <stable@vger.kernel.org> # v3.8+ Tested-by:
Yoann Sculo <yoann@sculo.fr> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Joachim Eastwood authored
Commit 803f8fc4 ("stmmac: move driver data setting into stmmac_dvr_probe") mistakenly set priv and not priv->dev as driver data. This meant that the remove, resume and suspend callbacks that fetched and tried to use this data would most likely explode. Fix the issue by using the correct variable. Fixes: 803f8fc4 ("stmmac: move driver data setting into stmmac_dvr_probe") Signed-off-by:
Joachim Eastwood <manabian@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Daniel Borkmann says: ==================== Couple of classifier fixes This fixes a couple of panics in the form of (analogous for cls_flow{,er}): [ 912.759276] BUG: unable to handle kernel NULL pointer dereference at (null) [ 912.759373] IP: [<ffffffffa09d4d6d>] cls_bpf_change+0x23d/0x268 [cls_bpf] [ 912.759441] PGD 8783c067 PUD 5f684067 PMD 0 [ 912.759491] Oops: 0002 [#1] SMP DEBUG_PAGEALLOC [ 912.759543] Modules linked in: cls_bpf(E) act_gact [...] [ 912.772734] CPU: 3 PID: 10489 Comm: tc Tainted: G W E 4.2.0-rc2+ #73 [ 912.775004] Hardware name: Apple Inc. MacBookAir5,1/Mac-66F35F19FE2A0D05, BIOS MBA51.88Z.00EF.B02.1211271028 11/27/2012 [ 912.777327] task: ffff88025eaa8000 ti: ffff88005f734000 task.ti: ffff88005f734000 [ 912.779662] RIP: 0010:[<ffffffffa09d4d6d>] [<ffffffffa09d4d6d>] cls_bpf_change+0x23d/0x268 [cls_bpf] [ 912.781991] RSP: 0018:ffff88005f7379c8 EFLAGS: 00010286 [ 912.784183] RAX: ffff880201d64e48 RBX: 0000000000000000 RCX: ffff880201d64e40 [ 912.786402] RDX: 0000000000000000 RSI: ffffffffa09d51c0 RDI: ffffffffa09d51a6 [ 912.788625] RBP: ffff88005f737a68 R08: 0000000000000000 R09: 0000000000000000 [ 912.790854] R10: 0000000000000001 R11: 0000000000000001 R12: ffff880078ab5a80 [ 912.793082] R13: ffff880232b31570 R14: ffff88005f737ae0 R15: ffff8801e215d1d0 [ 912.795181] FS: 00007f3c0c80d740(0000) GS:ffff880265400000(0000) knlGS:0000000000000000 [ 912.797281] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 912.799402] CR2: 0000000000000000 CR3: 000000005460f000 CR4: 00000000001407e0 [ 912.799403] Stack: [ 912.799407] ffffffff00000000 ffff88023ea18000 000000005f737a08 0000000000000000 [ 912.799415] ffffffff81f06140 ffff880201d64e40 0000000000000000 ffff88023ea1804c [ 912.799418] 0000000000000000 ffff88023ea18044 ffff88023ea18030 ffff88023ea18038 [ 912.799418] Call Trace: [ 912.799437] [<ffffffff816d5685>] tc_ctl_tfilter+0x335/0x910 [ 912.799443] [<ffffffff813622a8>] ? security_capable+0x48/0x60 [ 912.799448] [<ffffffff816b90e5>] rtnetlink_rcv_msg+0x95/0x240 [ 912.799454] [<ffffffff810f612d>] ? trace_hardirqs_on+0xd/0x10 [ 912.799456] [<ffffffff816b902f>] ? rtnetlink_rcv+0x1f/0x40 [ 912.799459] [<ffffffff816b902f>] ? rtnetlink_rcv+0x1f/0x40 [ 912.799461] [<ffffffff816b9050>] ? rtnetlink_rcv+0x40/0x40 [ 912.799464] [<ffffffff816df38f>] netlink_rcv_skb+0xaf/0xc0 [ 912.799467] [<ffffffff816b903e>] rtnetlink_rcv+0x2e/0x40 [ 912.799469] [<ffffffff816deaef>] netlink_unicast+0xef/0x1b0 [ 912.799471] [<ffffffff816defa0>] netlink_sendmsg+0x3f0/0x620 [ 912.799476] [<ffffffff81687028>] sock_sendmsg+0x38/0x50 [ 912.799479] [<ffffffff81687938>] ___sys_sendmsg+0x288/0x290 [ 912.799482] [<ffffffff810f7852>] ? __lock_acquire+0x572/0x2050 [ 912.799488] [<ffffffff810265db>] ? native_sched_clock+0x2b/0x90 [ 912.799493] [<ffffffff8116135f>] ? __audit_syscall_entry+0xaf/0x100 [ 912.799497] [<ffffffff8116135f>] ? __audit_syscall_entry+0xaf/0x100 [ 912.799501] [<ffffffff8112aa19>] ? current_kernel_time+0x69/0xd0 [ 912.799505] [<ffffffff81266f16>] ? __fget_light+0x66/0x90 [ 912.799508] [<ffffffff81688812>] __sys_sendmsg+0x42/0x80 [ 912.799510] [<ffffffff81688862>] SyS_sendmsg+0x12/0x20 [ 912.799515] [<ffffffff817f9a6e>] entry_SYSCALL_64_fastpath+0x12/0x76 [ 912.799540] Code: 4d 88 49 8b 57 08 48 89 51 08 49 8b 57 10 48 89 c8 48 83 c0 08 48 89 51 10 48 8b 51 10 48 c7 c6 c0 51 9d a0 48 c7 c7 a6 51 9d a0 <48> 89 02 48 8b 51 08 48 89 42 08 48 b8 00 02 20 00 00 00 ad de [ 912.799544] RIP [<ffffffffa09d4d6d>] cls_bpf_change+0x23d/0x268 [cls_bpf] [ 912.799544] RSP <ffff88005f7379c8> [ 912.799545] CR2: 0000000000000000 [ 912.807380] ---[ end trace a6440067cfdc7c29 ]--- I've split them into 3 patches, so they can be backported easier when needed. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
The following test case causes a NULL pointer dereference in cls_flow: tc filter add dev foo parent 1: handle 0x1 flow hash keys dst action ok tc filter replace dev foo parent 1: pref 49152 handle 0x1 \ flow hash keys mark action drop To be more precise, actually two different panics are fixed, the first occurs because tcf_exts_init() is not called on the newly allocated filter when we do a replace. And the second panic uncovered after that happens since the arguments of list_replace_rcu() are swapped, the old element needs to be the first argument and the new element the second. Fixes: 70da9f0b ("net: sched: cls_flow use RCU") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
John Fastabend <john.r.fastabend@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
The following test case causes a NULL pointer dereference in cls_flower: tc filter add dev foo parent 1: flower eth_type ipv4 action ok flowid 1:1 tc filter replace dev foo parent 1: pref 49152 handle 0x1 \ flower eth_type ipv6 action ok flowid 1:1 The problem is that commit 77b9900e ("tc: introduce Flower classifier") accidentally swapped the arguments of list_replace_rcu(), the old element needs to be the first argument and the new element the second. Fixes: 77b9900e ("tc: introduce Flower classifier") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
The following test case causes a NULL pointer dereference in cls_bpf: FOO="1,6 0 0 4294967295," tc filter add dev foo parent 1: bpf bytecode "$FOO" flowid 1:1 action ok tc filter replace dev foo parent 1: pref 49152 handle 0x1 \ bpf bytecode "$FOO" flowid 1:1 action drop The problem is that commit 1f947bf1 ("net: sched: rcu'ify cls_bpf") accidentally swapped the arguments of list_replace_rcu(), the old element needs to be the first argument and the new element the second. Fixes: 1f947bf1 ("net: sched: rcu'ify cls_bpf") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
John Fastabend <john.r.fastabend@intel.com> Acked-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'mac80211-for-davem-2015-07-17' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Some fixes for the current cycle: 1. Arik introduced an rtnl-locked regulatory API to be able to differentiate between place do/don't have the RTNL; this fixes missing locking in some of the code paths 2. Two small mesh bugfixes from Bob, one to avoid treating a certain malformed over-the-air frame and one to avoid sending a garbage field over the air. 3. A fix for powersave during WoWLAN suspend from Krishna Chaitanya. 4. A fix for a powersave vs. aggregation teardown race, from Michal. 5. Thomas reduced the loglevel of CRDA messages to avoid spamming the kernel log with mostly irrelevant information. 6. Tom fixed a dangling debugfs directory pointer that could cause crashes if subsequent addition of the same interface to debugfs failed for some reason. 7. A fix from myself for a list corruption issue in mac80211 during combined interface shutdown/removal - shut down interfaces first and only then remove them to avoid that. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Shaohui Xie authored
We store c45 PHY's id information in c45_ids, so it should be used to check the matching between PHY driver and PHY device for c45 PHY. Signed-off-by:
Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Konstantin Khlebnikov authored
Kernel generates a lot of warnings when dst entry reference counter overflows and becomes negative. That bug was seen several times at machines with outdated 3.10.y kernels. Most like it's already fixed in upstream. Anyway that flood completely kills machine and makes further debugging impossible. Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
1) If sk_filter() is applied, skb was leaked (not freed) 2) Testing SOCK_DEAD twice is racy : packet could be freed while already queued. 3) Remove obsolete comment about caching skb->len Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Reinhard Speyerer authored
Sierra Wireless MC7305/MC7355 with USB ID 1199:9041 also provide a second QMI/network interface like the MC73xx with USB ID 1199:68c0 on USB interface #10 when used in the appropriate USB configuration. Add the corresponding QMI_FIXED_INTF entry to the qmi_wwan driver. Please note that the second QMI/network interface is not working for early MC73xx firmware versions like 01.08.x as the device does not respond to QMI messages on the second /dev/cdc-wdm port. Signed-off-by:
Reinhard Speyerer <rspmn@arcor.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sergei Shtylyov authored
The TCCR.TSRQn bit may get clearead after TCCR gets read, so that TCCR write would get skipped. We don't need to check this bit before setting. Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Karicheri, Muralidharan authored
The keystone qmss will raise interrupt when packet arrive at the receive queue. Only control available to avoid interrupt from happening is to keep the free descriptor queue (FDQ) empty in the receive side. So the filling of descriptors into the FDQ has to happen after request_irq() call is made as part of knav_queue_enable_notify(). So move the function netcp_rxpool_refill() after this call. Signed-off-by:
Murali Karicheri <m-karicheri2@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
dingtianhong authored
The "follow" fail_over_mac policy is useful for multiport devices that either become confused or incur a performance penalty when multiple ports are programmed with the same MAC address, but the same MAC address still may happened by this steps for this policy: 1) echo +eth0 > /sys/class/net/bond0/bonding/slaves bond0 has the same mac address with eth0, it is MAC1. 2) echo +eth1 > /sys/class/net/bond0/bonding/slaves eth1 is backup, eth1 has MAC2. 3) ifconfig eth0 down eth1 became active slave, bond will swap MAC for eth0 and eth1, so eth1 has MAC1, and eth0 has MAC2. 4) ifconfig eth1 down there is no active slave, and eth1 still has MAC1, eth2 has MAC2. 5) ifconfig eth0 up the eth0 became active slave again, the bond set eth0 to MAC1. Something wrong here, then if you set eth1 up, the eth0 and eth1 will have the same MAC address, it will break this policy for ACTIVE_BACKUP mode. This patch will fix this problem by finding the old active slave and swap them MAC address before change active slave. Signed-off-by:
Ding Tianhong <dingtianhong@huawei.com> Tested-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'linux-can-fixes-for-4.2-20150716' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2015-07-16 this is a pull request of 2 patches by Stefan Agner. He fixes the resume operation in the mcp251x driver. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 20 Jul, 2015 5 commits
-
-
Herbert Xu authored
This patch reverts 19424e05 ("sit: Add gro callbacks to sit_offload") because it generates packets that cannot be handled even by our own GSO. Reported-by:
Wolfgang Walter <linux@stwm.de> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
7445E0 contains an ECO which disconnected the internal SF2 pseudo-PHY which was known to conflict with the external pseudo-PHY of BCM53125 switches. This motivated the need to utilize the internal SF2 MDIO controller via indirect register reads/writes to control external Broadcom switches due to this address conflict (both responded at address 30d). For 7445E0, the internal pseudo-PHY of the SF2 switch got disconnected, and as a consequence this prevents the internal SF2 MDIO bus controller from reading data (reads back everything as 0) since the MDI line is tied low. Fix this by making the indirect register reads and writes conditional to 7445D0, on 7445E0 we can utilize the SWITCH_MDIO controller (backed by mdio-unimac and not the DSA created slave MII bus). We utilize of_machine_is_compatible() here since this is the only way for use to differentiate between these two chips in a way that does not violate layers or becomes (too) vendor-specific. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
If the bond is enslaving a device with different type it will be setup by it, but if after being setup the enslave fails the bond doesn't switch back its type and also keeps pointers to foreign structures that can be long gone. Thus revert back any type changes if the enslave failed and the bond had to change its type. Example: Before patch: $ echo lo > bond0/bonding/slaves -bash: echo: write error: Cannot assign requested address $ ip l sh bond0 20: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN mode DEFAULT group default link/loopback 16:54:78:34:bd:41 brd 00:00:00:00:00:00 $ echo +eth1 > bond0/bonding/slaves $ ip l sh bond0 20: bond0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 52:54:00:3f:47:69 brd ff:ff:ff:ff:ff:ff (notice the MASTER flag is gone) After patch: $ echo lo > bond0/bonding/slaves -bash: echo: write error: Cannot assign requested address $ ip l sh bond0 21: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 6e:66:94:f6:07:fc brd ff:ff:ff:ff:ff:ff $ echo +eth1 > bond0/bonding/slaves $ ip l sh bond0 21: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 52:54:00:3f:47:69 brd ff:ff:ff:ff:ff:ff Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Fixes: e36b9d16 ("bonding: clean muticast addresses when device changes type") Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
When the bonding is being unloaded and the netdevice notifier is unregistered it executes NETDEV_UNREGISTER for each device which should remove the bond's proc entry but if the device enslaved is not of ARPHRD_ETHER type and is in front of the bonding, it may execute bond_release_and_destroy() first which would release the last slave and destroy the bond device leaving the proc entry and thus we will get the following error (with dynamic debug on for bond_netdev_event to see the events order): [ 908.963051] eql: event: 9 [ 908.963052] eql: IFF_SLAVE [ 908.963054] eql: event: 2 [ 908.963056] eql: IFF_SLAVE [ 908.963058] eql: event: 6 [ 908.963059] eql: IFF_SLAVE [ 908.963110] bond0: Releasing active interface eql [ 908.976168] bond0: Destroying bond bond0 [ 908.976266] bond0 (unregistering): Released all slaves [ 908.984097] ------------[ cut here ]------------ [ 908.984107] WARNING: CPU: 0 PID: 1787 at fs/proc/generic.c:575 remove_proc_entry+0x112/0x160() [ 908.984110] remove_proc_entry: removing non-empty directory 'net/bonding', leaking at least 'bond0' [ 908.984111] Modules linked in: bonding(-) eql(O) 9p nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ppdev qxl drm_kms_helper snd_hda_codec_generic aesni_intel ttm aes_x86_64 glue_helper pcspkr lrw gf128mul ablk_helper cryptd snd_hda_intel virtio_console snd_hda_codec psmouse serio_raw snd_hwdep snd_hda_core 9pnet_virtio 9pnet evdev joydev drm virtio_balloon snd_pcm snd_timer snd soundcore i2c_piix4 i2c_core pvpanic acpi_cpufreq parport_pc parport processor thermal_sys button autofs4 ext4 crc16 mbcache jbd2 hid_generic usbhid hid sg sr_mod cdrom ata_generic virtio_blk virtio_net floppy ata_piix e1000 libata ehci_pci virtio_pci scsi_mod uhci_hcd ehci_hcd virtio_ring virtio usbcore usb_common [last unloaded: bonding] [ 908.984168] CPU: 0 PID: 1787 Comm: rmmod Tainted: G W O 4.2.0-rc2+ #8 [ 908.984170] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 908.984172] 0000000000000000 ffffffff81732d41 ffffffff81525b34 ffff8800358dfda8 [ 908.984175] ffffffff8106c521 ffff88003595af78 ffff88003595af40 ffff88003e3a4280 [ 908.984178] ffffffffa058d040 0000000000000000 ffffffff8106c59a ffffffff8172ebd0 [ 908.984181] Call Trace: [ 908.984188] [<ffffffff81525b34>] ? dump_stack+0x40/0x50 [ 908.984193] [<ffffffff8106c521>] ? warn_slowpath_common+0x81/0xb0 [ 908.984196] [<ffffffff8106c59a>] ? warn_slowpath_fmt+0x4a/0x50 [ 908.984199] [<ffffffff81218352>] ? remove_proc_entry+0x112/0x160 [ 908.984205] [<ffffffffa05850e6>] ? bond_destroy_proc_dir+0x26/0x30 [bonding] [ 908.984208] [<ffffffffa057540e>] ? bond_net_exit+0x8e/0xa0 [bonding] [ 908.984217] [<ffffffff8142f407>] ? ops_exit_list.isra.4+0x37/0x70 [ 908.984225] [<ffffffff8142f52d>] ? unregister_pernet_operations+0x8d/0xd0 [ 908.984228] [<ffffffff8142f58d>] ? unregister_pernet_subsys+0x1d/0x30 [ 908.984232] [<ffffffffa0585269>] ? bonding_exit+0x23/0xdba [bonding] [ 908.984236] [<ffffffff810e28ba>] ? SyS_delete_module+0x18a/0x250 [ 908.984241] [<ffffffff81086f99>] ? task_work_run+0x89/0xc0 [ 908.984244] [<ffffffff8152b732>] ? entry_SYSCALL_64_fastpath+0x16/0x75 [ 908.984247] ---[ end trace 7c006ed4abbef24b ]--- Thus remove the proc entry manually if bond_release_and_destroy() is used. Because of the checks in bond_remove_proc_entry() it's not a problem for a bond device to change namespaces (the bug fixed by the Fixes commit) but since commit f9399814 ("bonding: Don't allow bond devices to change network namespaces.") that can't happen anyway. Reported-by:
Carol Soto <clsoto@linux.vnet.ibm.com> Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Fixes: a64d49c3 ("bonding: Manage /proc/net/bonding/ entries from the netdev events") Tested-by:
Carol L Soto <clsoto@linux.vnet.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
The mv88e6xxx_priv_state structure contains an fid_mask, where 1 means the FID is free to use, 0 means the FID is in use. This patch fixes the bit clear in mv88e6xxx_leave_bridge() when assigning a new FID to a port. Example scenario: I have 7 ports, port 5 is CPU, port 6 is unused (no PHY). After setting the ports 0, 1 and 2 in bridge br0, and ports 3 and 4 in bridge br1, I have the following fid_mask: 0b111110010110 (0xf96). Indeed, br0 uses FID 0, and br1 uses FID 3. After setting nomaster for port 0, I get the wrong fid_mask: 0b10 (0x2). With this patch we correctly get 0b111110010100 (0xf94), meaning port 0 uses FID 1, br0 uses FID 0, and br1 uses FID 3. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-