1. 11 Mar, 2014 7 commits
  2. 10 Mar, 2014 4 commits
  3. 09 Mar, 2014 1 commit
    • Michael Chan's avatar
      bnx2: Fix shutdown sequence · a8d9bc2e
      Michael Chan authored
      The pci shutdown handler added in:
      
          bnx2: Add pci shutdown handler
          commit 25bfb1dd
      
      created a shutdown down sequence without chip reset if the device was
      never brought up.  This can cause the firmware to shutdown the PHY
      prematurely and cause MMIO read cycles to be unresponsive.  On some
      systems, it may generate NMI in the bnx2's pci shutdown handler.
      
      The fix is to tell the firmware not to shutdown the PHY if there was
      no prior chip reset.
      Signed-off-by: default avatarMichael Chan <mchan@broadcom.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a8d9bc2e
  4. 07 Mar, 2014 1 commit
  5. 06 Mar, 2014 27 commits
    • Sabrina Dubroca's avatar
      ipv6: don't set DST_NOCOUNT for remotely added routes · c88507fb
      Sabrina Dubroca authored
      DST_NOCOUNT should only be used if an authorized user adds routes
      locally. In case of routes which are added on behalf of router
      advertisments this flag must not get used as it allows an unlimited
      number of routes getting added remotely.
      Signed-off-by: default avatarSabrina Dubroca <sd@queasysnail.net>
      Acked-by: default avatarHannes Frederic Sowa <hannes@stressinduktion.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c88507fb
    • Amir Vadai's avatar
      net/mlx4_core: mlx4_init_slave() shouldn't access comm channel before PF is ready · 97989356
      Amir Vadai authored
      Currently, the PF call to pci_enable_sriov from the PF probe function
      stalls for 10 seconds times the number of VFs probed on the host. This
      happens because the way for such VFs to determine of the PF
      initialization finished, is by attempting to issue reset on the
      comm-channel and get timeout (after 10s).
      
      The PF probe function is called from a kenernel workqueue, and therefore
      during that time, rcu lock is being held and kernel's workqueue is
      stalled. This blocks other processes that try to use the workqueue
      or rcu lock.  For example, interface renaming which is calling
      rcu_synchronize is blocked, and timedout by systemd.
      
      Changed mlx4_init_slave() to allow VF probed on the host to immediatly
      detect that the PF is not ready, and return EPROBE_DEFER instantly.
      
      Only when the PF finishes the initialization, allow such VFs to
      access the comm channel.
      
      This issue and fix are relevant only for probed VFs on the hypervisor,
      there is no way to pass this information to a VM until comm channel is
      ready, so in a VM, if PF is not ready, the first command will be timedout
      after 10 seconds and return EPROBE_DEFER.
      Signed-off-by: default avatarAmir Vadai <amirv@mellanox.com>
      Signed-off-by: default avatarOr Gerlitz <ogerlitz@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      97989356
    • Amir Vadai's avatar
      net/mlx4_core: Fix memory access error in mlx4_QUERY_DEV_CAP_wrapper() · 57352ef4
      Amir Vadai authored
      Fix a regression introduced by [1]. outbox was accessed instead of
      outbox->buf. Typo was copy-pasted to [2] and [3].
      
      [1] - cc1ade94 mlx4_core: Disable memory windows for virtual functions
      [2] - 4de65803 mlx4_core: Add support for steerable IB UD QPs
      [3] - 7ffdf726 net/mlx4_core: Add basic support for TCP/IP offloads under
            tunneling
      Signed-off-by: default avatarOr Gerlitz <ogerlitz@mellanox.com>
      Signed-off-by: default avatarAmir Vadai <amirv@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      57352ef4
    • Sasha Levin's avatar
      bonding: correctly handle out of range parameters for lp_interval · 5bd4e4c1
      Sasha Levin authored
      We didn't correctly check cases where the value for lp_interval is not
      within the legal range due to a missing table terminator.
      
      This would let userspace trigger a kernel panic by specifying a value out
      of range:
      
      	echo -1 > /sys/devices/virtual/net/bond0/bonding/lp_interval
      
      Introduced by commit 4325b374 ("bonding: convert lp_interval to use
      the new option API").
      Acked-by: default avatarNikolay Aleksandrov <nikolay@redhat.com>
      Signed-off-by: default avatarSasha Levin <sasha.levin@oracle.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5bd4e4c1
    • Anton Nayshtut's avatar
      ipv6: Fix exthdrs offload registration. · d2d273ff
      Anton Nayshtut authored
      Without this fix, ipv6_exthdrs_offload_init doesn't register IPPROTO_DSTOPTS
      offload, but returns 0 (as the IPPROTO_ROUTING registration actually succeeds).
      
      This then causes the ipv6_gso_segment to drop IPv6 packets with IPPROTO_DSTOPTS
      header.
      
      The issue detected and the fix verified by running MS HCK Offload LSO test on
      top of QEMU Windows guests, as this test sends IPv6 packets with
      IPPROTO_DSTOPTS.
      Signed-off-by: default avatarAnton Nayshtut <anton@swortex.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d2d273ff
    • Anton Blanchard's avatar
      ibmveth: Fix endian issues with MAC addresses · d746ca95
      Anton Blanchard authored
      The code to load a MAC address into a u64 for passing to the
      hypervisor via a register is broken on little endian.
      
      Create a helper function called ibmveth_encode_mac_addr
      which does the right thing in both big and little endian.
      
      We were storing the MAC address in a long in struct ibmveth_adapter.
      It's never used so remove it - we don't need another place in the
      driver where we create endian issues with MAC addresses.
      Signed-off-by: default avatarAnton Blanchard <anton@samba.org>
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d746ca95
    • Anton Blanchard's avatar
      net: unix socket code abuses csum_partial · 0a13404d
      Anton Blanchard authored
      The unix socket code is using the result of csum_partial to
      hash into a lookup table:
      
      	unix_hash_fold(csum_partial(sunaddr, len, 0));
      
      csum_partial is only guaranteed to produce something that can be
      folded into a checksum, as its prototype explains:
      
       * returns a 32-bit number suitable for feeding into itself
       * or csum_tcpudp_magic
      
      The 32bit value should not be used directly.
      
      Depending on the alignment, the ppc64 csum_partial will return
      different 32bit partial checksums that will fold into the same
      16bit checksum.
      
      This difference causes the following testcase (courtesy of
      Gustavo) to sometimes fail:
      
      #include <sys/socket.h>
      #include <stdio.h>
      
      int main()
      {
      	int fd = socket(PF_LOCAL, SOCK_STREAM|SOCK_CLOEXEC, 0);
      
      	int i = 1;
      	setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &i, 4);
      
      	struct sockaddr addr;
      	addr.sa_family = AF_LOCAL;
      	bind(fd, &addr, 2);
      
      	listen(fd, 128);
      
      	struct sockaddr_storage ss;
      	socklen_t sslen = (socklen_t)sizeof(ss);
      	getsockname(fd, (struct sockaddr*)&ss, &sslen);
      
      	fd = socket(PF_LOCAL, SOCK_STREAM|SOCK_CLOEXEC, 0);
      
      	if (connect(fd, (struct sockaddr*)&ss, sslen) == -1){
      		perror(NULL);
      		return 1;
      	}
      	printf("OK\n");
      	return 0;
      }
      
      As suggested by davem, fix this by using csum_fold to fold the
      partial 32bit checksum into a 16bit checksum before using it.
      Signed-off-by: default avatarAnton Blanchard <anton@samba.org>
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0a13404d
    • Andrew Lutomirski's avatar
      net: Improve SO_TIMESTAMPING documentation and fix a minor code bug · adca4767
      Andrew Lutomirski authored
      The original documentation was very unclear.
      
      The code fix is presumably related to the formerly unclear
      documentation: SOCK_TIMESTAMPING_RX_SOFTWARE has no effect on
      __sock_recv_timestamp's behavior, so calling __sock_recv_ts_and_drops
      from sock_recv_ts_and_drops if only SOCK_TIMESTAMPING_RX_SOFTWARE is
      set is pointless.  This should have no user-observable effect.
      Signed-off-by: default avatarAndy Lutomirski <luto@amacapital.net>
      Acked-by: default avatarRichard Cochran <richardcochran@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      adca4767
    • Bjorn Helgaas's avatar
      phy: fix compiler array bounds warning on settings[] · 4ae6e50c
      Bjorn Helgaas authored
      With -Werror=array-bounds, gcc v4.7.x warns that in phy_find_valid(), the
      settings[] "array subscript is above array bounds", I think because idx is
      a signed integer and if the caller supplied idx < 0, we pass the guard but
      still reference out of bounds.
      
      Fix this by making idx unsigned here and elsewhere.
      Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
      Acked-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4ae6e50c
    • Florian Westphal's avatar
      inet: frag: make sure forced eviction removes all frags · e588e2f2
      Florian Westphal authored
      Quoting Alexander Aring:
        While fragmentation and unloading of 6lowpan module I got this kernel Oops
        after few seconds:
      
        BUG: unable to handle kernel paging request at f88bbc30
        [..]
        Modules linked in: ipv6 [last unloaded: 6lowpan]
        Call Trace:
         [<c012af4c>] ? call_timer_fn+0x54/0xb3
         [<c012aef8>] ? process_timeout+0xa/0xa
         [<c012b66b>] run_timer_softirq+0x140/0x15f
      
      Problem is that incomplete frags are still around after unload; when
      their frag expire timer fires, we get crash.
      
      When a netns is removed (also done when unloading module), inet_frag
      calls the evictor with 'force' argument to purge remaining frags.
      
      The evictor loop terminates when accounted memory ('work') drops to 0
      or the lru-list becomes empty.  However, the mem accounting is done
      via percpu counters and may not be accurate, i.e. loop may terminate
      prematurely.
      
      Alter evictor to only stop once the lru list is empty when force is
      requested.
      Reported-by: default avatarPhoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
      Reported-by: default avatarAlexander Aring <alex.aring@gmail.com>
      Tested-by: default avatarAlexander Aring <alex.aring@gmail.com>
      Signed-off-by: default avatarFlorian Westphal <fw@strlen.de>
      Acked-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e588e2f2
    • David S. Miller's avatar
      Merge branch 'tipc' · 409e1456
      David S. Miller authored
      Eric Hugne says:
      
      ====================
      tipc: refcount and memory leak fixes
      
      v3: Remove error logging from data path completely. Rebased on top of
          latest net merge.
      
      v2: Drop specific -ENOMEM logging in patch #1 (tipc: allow connection
          shutdown callback to be invoked in advance) And add a general error
          message if an internal server tries to send a message on a
          closed/nonexisting connection.
      
      In addition to the fix for refcount leak and memory leak during
      module removal, we also fix a problem where the topology server
      listening socket where unexpectedly closed. We also eliminate an
      unnecessary context switch during accept()/recvmsg() for nonblocking
      sockets.
      
      It might be good to include this patchset in stable aswell. After the
      v3 rebase on latest merge from net all patches apply cleanly on that
      tree.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      409e1456
    • Erik Hugne's avatar
      tipc: don't log disabled tasklet handler errors · 2892505e
      Erik Hugne authored
      Failure to schedule a TIPC tasklet with tipc_k_signal because the
      tasklet handler is disabled is not an error. It means TIPC is
      currently in the process of shutting down. We remove the error
      logging in this case.
      Signed-off-by: default avatarErik Hugne <erik.hugne@ericsson.com>
      Reviewed-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2892505e
    • Erik Hugne's avatar
      tipc: fix memory leak during module removal · 1bb8dce5
      Erik Hugne authored
      When the TIPC module is removed, the tasklet handler is disabled
      before all other subsystems. This will cause lingering publications
      in the name table because the node_down tasklets responsible to
      clean up publications from an unreachable node will never run.
      When the name table is shut down, these publications are detected
      and an error message is logged:
      tipc: nametbl_stop(): orphaned hash chain detected
      This is actually a memory leak, introduced with commit
      993b858e ("tipc: correct the order
      of stopping services at rmmod")
      
      Instead of just logging an error and leaking memory, we free
      the orphaned entries during nametable shutdown.
      Signed-off-by: default avatarErik Hugne <erik.hugne@ericsson.com>
      Reviewed-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1bb8dce5
    • Erik Hugne's avatar
      tipc: drop subscriber connection id invalidation · edcc0511
      Erik Hugne authored
      When a topology server subscriber is disconnected, the associated
      connection id is set to zero. A check vs zero is then done in the
      subscription timeout function to see if the subscriber have been
      shut down. This is unnecessary, because all subscription timers
      will be cancelled when a subscriber terminates. Setting the
      connection id to zero is actually harmful because id zero is the
      identity of the topology server listening socket, and can cause a
      race that leads to this socket being closed instead.
      Signed-off-by: default avatarErik Hugne <erik.hugne@ericsson.com>
      Acked-by: default avatarYing Xue <ying.xue@windriver.com>
      Reviewed-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      edcc0511
    • Ying Xue's avatar
      tipc: avoid to unnecessary process switch under non-block mode · fe8e4649
      Ying Xue authored
      When messages are received via tipc socket under non-block mode,
      schedule_timeout() is called in tipc_wait_for_rcvmsg(), that is,
      the process of receiving messages will be scheduled once although
      timeout value passed to schedule_timeout() is 0. The same issue
      exists in accept()/wait_for_accept(). To avoid this unnecessary
      process switch, we only call schedule_timeout() if the timeout
      value is non-zero.
      Signed-off-by: default avatarYing Xue <ying.xue@windriver.com>
      Reviewed-by: default avatarErik Hugne <erik.hugne@ericsson.com>
      Reviewed-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      fe8e4649
    • Ying Xue's avatar
      tipc: fix connection refcount leak · 4652edb7
      Ying Xue authored
      When tipc_conn_sendmsg() calls tipc_conn_lookup() to query a
      connection instance, its reference count value is increased if
      it's found. But subsequently if it's found that the connection is
      closed, the work of sending message is not queued into its server
      send workqueue, and the connection reference count is not decreased.
      This will cause a reference count leak. To reproduce this problem,
      an application would need to open and closes topology server
      connections with high intensity.
      
      We fix this by immediately decrementing the connection reference
      count if a send fails due to the connection being closed.
      Signed-off-by: default avatarYing Xue <ying.xue@windriver.com>
      Acked-by: default avatarErik Hugne <erik.hugne@ericsson.com>
      Reviewed-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4652edb7
    • Ying Xue's avatar
      tipc: allow connection shutdown callback to be invoked in advance · 6d4ebeb4
      Ying Xue authored
      Currently connection shutdown callback function is called when
      connection instance is released in tipc_conn_kref_release(), and
      receiving packets and sending packets are running in different
      threads. Even if connection is closed by the thread of receiving
      packets, its shutdown callback may not be called immediately as
      the connection reference count is non-zero at that moment. So,
      although the connection is shut down by the thread of receiving
      packets, the thread of sending packets doesn't know it. Before
      its shutdown callback is invoked to tell the sending thread its
      connection has been closed, the sending thread may deliver
      messages by tipc_conn_sendmsg(), this is why the following error
      information appears:
      
      "Sending subscription event failed, no memory"
      
      To eliminate it, allow connection shutdown callback function to
      be called before connection id is removed in tipc_close_conn(),
      which makes the sending thread know the truth in time that its
      socket is closed so that it doesn't send message to it. We also
      remove the "Sending XXX failed..." error reporting for topology
      and config services.
      Signed-off-by: default avatarYing Xue <ying.xue@windriver.com>
      Signed-off-by: default avatarErik Hugne <erik.hugne@ericsson.com>
      Reviewed-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6d4ebeb4
    • Guillaume Nault's avatar
      l2tp: fix userspace reception on plain L2TP sockets · 9e9cb622
      Guillaume Nault authored
      As pppol2tp_recv() never queues up packets to plain L2TP sockets,
      pppol2tp_recvmsg() never returns data to userspace, thus making
      the recv*() system calls unusable.
      
      Instead of dropping packets when the L2TP socket isn't bound to a PPP
      channel, this patch adds them to its reception queue.
      Signed-off-by: default avatarGuillaume Nault <g.nault@alphalink.fr>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9e9cb622
    • Guillaume Nault's avatar
      l2tp: fix manual sequencing (de)activation in L2TPv2 · bb5016ea
      Guillaume Nault authored
      Commit e0d4435f "l2tp: Update PPP-over-L2TP driver to work over L2TPv3"
      broke the PPPOL2TP_SO_SENDSEQ setsockopt. The L2TP header length was
      previously computed by pppol2tp_l2t_header_len() before each call to
      l2tp_xmit_skb(). Now that header length is retrieved from the hdr_len
      session field, this field must be updated every time the L2TP header
      format is modified, or l2tp_xmit_skb() won't push the right amount of
      data for the L2TP header.
      
      This patch uses l2tp_session_set_header_len() to adjust hdr_len every
      time sequencing is (de)activated from userspace (either by the
      PPPOL2TP_SO_SENDSEQ setsockopt or the L2TP_ATTR_SEND_SEQ netlink
      attribute).
      Signed-off-by: default avatarGuillaume Nault <g.nault@alphalink.fr>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bb5016ea
    • Amitkumar Karwar's avatar
      mwifiex: save and copy AP's VHT capability info correctly · d5124648
      Amitkumar Karwar authored
      While preparing association request, intersection of device's
      VHT capability information and corresponding field advertised
      by AP is used.
      
      This patch fixes a couple errors while saving and copying vht_cap
      and vht_oper fields from AP's beacon.
      
      Cc: <stable@vger.kernel.org> # 3.9+
      Signed-off-by: default avatarAmitkumar Karwar <akarwar@marvell.com>
      Signed-off-by: default avatarBing Zhao <bzhao@marvell.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      d5124648
    • Amitkumar Karwar's avatar
      mwifiex: copy AP's HT capability info correctly · c99b1861
      Amitkumar Karwar authored
      While preparing association request, intersection of device's HT
      capability information and corresponding fields advertised by AP
      is used.
      
      This patch fixes an error while copying this field from AP's
      beacon.
      
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarAmitkumar Karwar <akarwar@marvell.com>
      Signed-off-by: default avatarBing Zhao <bzhao@marvell.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      c99b1861
    • John W. Linville's avatar
    • Haiyang Zhang's avatar
      hyperv: Move state setting for link query · 1b07da51
      Haiyang Zhang authored
      It moves the state setting for query into rndis_filter_receive_response().
      All callbacks including query-complete and status-callback are synchronized
      by channel->inbound_lock. This prevents pentential race between them.
      Signed-off-by: default avatarHaiyang Zhang <haiyangz@microsoft.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1b07da51
    • Soren Brinkmann's avatar
      net: macb: DMA-unmap full rx-buffer · 48330e08
      Soren Brinkmann authored
      When allocating RX buffers a fixed size is used, while freeing is based
      on actually received bytes, resulting in the following kernel warning
      when CONFIG_DMA_API_DEBUG is enabled:
       WARNING: CPU: 0 PID: 0 at lib/dma-debug.c:1051 check_unmap+0x258/0x894()
       macb e000b000.ethernet: DMA-API: device driver frees DMA memory with different size [device address=0x000000002d170040] [map size=1536 bytes] [unmap size=60 bytes]
       Modules linked in:
       CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.14.0-rc3-xilinx-00220-g49f84081ce4f #65
       [<c001516c>] (unwind_backtrace) from [<c0011df8>] (show_stack+0x10/0x14)
       [<c0011df8>] (show_stack) from [<c03c775c>] (dump_stack+0x7c/0xc8)
       [<c03c775c>] (dump_stack) from [<c00245cc>] (warn_slowpath_common+0x60/0x84)
       [<c00245cc>] (warn_slowpath_common) from [<c0024670>] (warn_slowpath_fmt+0x2c/0x3c)
       [<c0024670>] (warn_slowpath_fmt) from [<c0227d44>] (check_unmap+0x258/0x894)
       [<c0227d44>] (check_unmap) from [<c0228588>] (debug_dma_unmap_page+0x64/0x70)
       [<c0228588>] (debug_dma_unmap_page) from [<c02ab78c>] (gem_rx+0x118/0x170)
       [<c02ab78c>] (gem_rx) from [<c02ac4d4>] (macb_poll+0x24/0x94)
       [<c02ac4d4>] (macb_poll) from [<c031222c>] (net_rx_action+0x6c/0x188)
       [<c031222c>] (net_rx_action) from [<c0028a28>] (__do_softirq+0x108/0x280)
       [<c0028a28>] (__do_softirq) from [<c0028e8c>] (irq_exit+0x84/0xf8)
       [<c0028e8c>] (irq_exit) from [<c000f360>] (handle_IRQ+0x68/0x8c)
       [<c000f360>] (handle_IRQ) from [<c0008528>] (gic_handle_irq+0x3c/0x60)
       [<c0008528>] (gic_handle_irq) from [<c0012904>] (__irq_svc+0x44/0x78)
       Exception stack(0xc056df20 to 0xc056df68)
       df20: 00000001 c0577430 00000000 c0577430 04ce8e0d 00000002 edfce238 00000000
       df40: 04e20f78 00000002 c05981f4 00000000 00000008 c056df68 c0064008 c02d7658
       df60: 20000013 ffffffff
       [<c0012904>] (__irq_svc) from [<c02d7658>] (cpuidle_enter_state+0x54/0xf8)
       [<c02d7658>] (cpuidle_enter_state) from [<c02d77dc>] (cpuidle_idle_call+0xe0/0x138)
       [<c02d77dc>] (cpuidle_idle_call) from [<c000f660>] (arch_cpu_idle+0x8/0x3c)
       [<c000f660>] (arch_cpu_idle) from [<c006bec4>] (cpu_startup_entry+0xbc/0x124)
       [<c006bec4>] (cpu_startup_entry) from [<c053daec>] (start_kernel+0x350/0x3b0)
       ---[ end trace d5fdc38641bd3a11 ]---
       Mapped at:
        [<c0227184>] debug_dma_map_page+0x48/0x11c
        [<c02ab32c>] gem_rx_refill+0x154/0x1f8
        [<c02ac7b4>] macb_open+0x270/0x3e0
        [<c03152e0>] __dev_open+0x7c/0xfc
        [<c031554c>] __dev_change_flags+0x8c/0x140
      
      Fixing this by passing the same size which is passed during mapping the
      memory to the unmap function as well.
      Signed-off-by: default avatarSoren Brinkmann <soren.brinkmann@xilinx.com>
      Reviewed-by: default avatarBen Hutchings <ben@decadent.org.uk>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      48330e08
    • Soren Brinkmann's avatar
      net: macb: Check DMA mappings for error · 92030908
      Soren Brinkmann authored
      With CONFIG_DMA_API_DEBUG enabled the following warning is printed:
       WARNING: CPU: 0 PID: 619 at lib/dma-debug.c:1101 check_unmap+0x758/0x894()
       macb e000b000.ethernet: DMA-API: device driver failed to check map error[device address=0x000000002d171c02] [size=322 bytes] [mapped as single]
       Modules linked in:
       CPU: 0 PID: 619 Comm: udhcpc Not tainted 3.14.0-rc3-xilinx-00219-gd158fc7f #63
       [<c001516c>] (unwind_backtrace) from [<c0011df8>] (show_stack+0x10/0x14)
       [<c0011df8>] (show_stack) from [<c03c7714>] (dump_stack+0x7c/0xc8)
       [<c03c7714>] (dump_stack) from [<c00245cc>] (warn_slowpath_common+0x60/0x84)
       [<c00245cc>] (warn_slowpath_common) from [<c0024670>] (warn_slowpath_fmt+0x2c/0x3c)
       [<c0024670>] (warn_slowpath_fmt) from [<c0228244>] (check_unmap+0x758/0x894)
       [<c0228244>] (check_unmap) from [<c0228588>] (debug_dma_unmap_page+0x64/0x70)
       [<c0228588>] (debug_dma_unmap_page) from [<c02aba64>] (macb_interrupt+0x1f8/0x2dc)
       [<c02aba64>] (macb_interrupt) from [<c006c6e4>] (handle_irq_event_percpu+0x2c/0x178)
       [<c006c6e4>] (handle_irq_event_percpu) from [<c006c86c>] (handle_irq_event+0x3c/0x5c)
       [<c006c86c>] (handle_irq_event) from [<c006f548>] (handle_fasteoi_irq+0xb8/0x100)
       [<c006f548>] (handle_fasteoi_irq) from [<c006c148>] (generic_handle_irq+0x20/0x30)
       [<c006c148>] (generic_handle_irq) from [<c000f35c>] (handle_IRQ+0x64/0x8c)
       [<c000f35c>] (handle_IRQ) from [<c0008528>] (gic_handle_irq+0x3c/0x60)
       [<c0008528>] (gic_handle_irq) from [<c0012904>] (__irq_svc+0x44/0x78)
       Exception stack(0xed197f60 to 0xed197fa8)
       7f60: 00000134 60000013 bd94362e bd94362e be96b37c 00000014 fffffd72 00000122
       7f80: c000ebe4 ed196000 00000000 00000011 c032c0d8 ed197fa8 c0064008 c000ea20
       7fa0: 60000013 ffffffff
       [<c0012904>] (__irq_svc) from [<c000ea20>] (ret_fast_syscall+0x0/0x48)
       ---[ end trace 478f921d0d542d1e ]---
       Mapped at:
        [<c0227184>] debug_dma_map_page+0x48/0x11c
        [<c02aaca0>] macb_start_xmit+0x184/0x2a8
        [<c03143c0>] dev_hard_start_xmit+0x334/0x470
        [<c032c09c>] sch_direct_xmit+0x78/0x2f8
        [<c0314814>] __dev_queue_xmit+0x318/0x708
      
      due to missing checks of the dma mapping. Add the appropriate checks to fix
      this.
      Signed-off-by: default avatarSoren Brinkmann <soren.brinkmann@xilinx.com>
      Reviewed-by: default avatarBen Hutchings <ben@decadent.org.uk>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      92030908
    • Daniel Borkmann's avatar
      net: sctp: fix skb leakage in COOKIE ECHO path of chunk->auth_chunk · c485658b
      Daniel Borkmann authored
      While working on ec0223ec ("net: sctp: fix sctp_sf_do_5_1D_ce to
      verify if we/peer is AUTH capable"), we noticed that there's a skb
      memory leakage in the error path.
      
      Running the same reproducer as in ec0223ec and by unconditionally
      jumping to the error label (to simulate an error condition) in
      sctp_sf_do_5_1D_ce() receive path lets kmemleak detector bark about
      the unfreed chunk->auth_chunk skb clone:
      
      Unreferenced object 0xffff8800b8f3a000 (size 256):
        comm "softirq", pid 0, jiffies 4294769856 (age 110.757s)
        hex dump (first 32 bytes):
          00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
          89 ab 75 5e d4 01 58 13 00 00 00 00 00 00 00 00  ..u^..X.........
        backtrace:
          [<ffffffff816660be>] kmemleak_alloc+0x4e/0xb0
          [<ffffffff8119f328>] kmem_cache_alloc+0xc8/0x210
          [<ffffffff81566929>] skb_clone+0x49/0xb0
          [<ffffffffa0467459>] sctp_endpoint_bh_rcv+0x1d9/0x230 [sctp]
          [<ffffffffa046fdbc>] sctp_inq_push+0x4c/0x70 [sctp]
          [<ffffffffa047e8de>] sctp_rcv+0x82e/0x9a0 [sctp]
          [<ffffffff815abd38>] ip_local_deliver_finish+0xa8/0x210
          [<ffffffff815a64af>] nf_reinject+0xbf/0x180
          [<ffffffffa04b4762>] nfqnl_recv_verdict+0x1d2/0x2b0 [nfnetlink_queue]
          [<ffffffffa04aa40b>] nfnetlink_rcv_msg+0x14b/0x250 [nfnetlink]
          [<ffffffff815a3269>] netlink_rcv_skb+0xa9/0xc0
          [<ffffffffa04aa7cf>] nfnetlink_rcv+0x23f/0x408 [nfnetlink]
          [<ffffffff815a2bd8>] netlink_unicast+0x168/0x250
          [<ffffffff815a2fa1>] netlink_sendmsg+0x2e1/0x3f0
          [<ffffffff8155cc6b>] sock_sendmsg+0x8b/0xc0
          [<ffffffff8155d449>] ___sys_sendmsg+0x369/0x380
      
      What happens is that commit bbd0d598 clones the skb containing
      the AUTH chunk in sctp_endpoint_bh_rcv() when having the edge case
      that an endpoint requires COOKIE-ECHO chunks to be authenticated:
      
        ---------- INIT[RANDOM; CHUNKS; HMAC-ALGO] ---------->
        <------- INIT-ACK[RANDOM; CHUNKS; HMAC-ALGO] ---------
        ------------------ AUTH; COOKIE-ECHO ---------------->
        <-------------------- COOKIE-ACK ---------------------
      
      When we enter sctp_sf_do_5_1D_ce() and before we actually get to
      the point where we process (and subsequently free) a non-NULL
      chunk->auth_chunk, we could hit the "goto nomem_init" path from
      an error condition and thus leave the cloned skb around w/o
      freeing it.
      
      The fix is to centrally free such clones in sctp_chunk_destroy()
      handler that is invoked from sctp_chunk_free() after all refs have
      dropped; and also move both kfree_skb(chunk->auth_chunk) there,
      so that chunk->auth_chunk is either NULL (since sctp_chunkify()
      allocs new chunks through kmem_cache_zalloc()) or non-NULL with
      a valid skb pointer. chunk->skb and chunk->auth_chunk are the
      only skbs in the sctp_chunk structure that need to be handeled.
      
      While at it, we should use consume_skb() for both. It is the same
      as dev_kfree_skb() but more appropriately named as we are not
      a device but a protocol. Also, this effectively replaces the
      kfree_skb() from both invocations into consume_skb(). Functions
      are the same only that kfree_skb() assumes that the frame was
      being dropped after a failure (e.g. for tools like drop monitor),
      usage of consume_skb() seems more appropriate in function
      sctp_chunk_destroy() though.
      
      Fixes: bbd0d598 ("[SCTP]: Implement the receive and verification of AUTH chunk")
      Signed-off-by: default avatarDaniel Borkmann <dborkman@redhat.com>
      Cc: Vlad Yasevich <yasevich@gmail.com>
      Cc: Neil Horman <nhorman@tuxdriver.com>
      Acked-by: default avatarVlad Yasevich <vyasevich@gmail.com>
      Acked-by: default avatarNeil Horman <nhorman@tuxdriver.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c485658b
    • hayeswang's avatar
      r8152: disable the ECM mode · 10c32717
      hayeswang authored
      There are known issues for switching the drivers between ECM mode and
      vendor mode. The interrup transfer may become abnormal. The hardware
      may have the opportunity to die if you change the configuration without
      unloading the current driver first, because all the control transfers
      of the current driver would fail after the command of switching the
      configuration.
      
      Although to use the ecm driver and vendor driver independently is fine,
      it may have problems to change the driver from one to the other by
      switching the configuration. Additionally, now the vendor mode driver
      is more powerful than the ECM driver. Thus, disable the ECM mode driver,
      and let r8152 to set the configuration to vendor mode and reset the
      device automatically.
      Signed-off-by: default avatarHayes Wang <hayeswang@realtek.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      10c32717