- 14 Mar, 2011 18 commits
-
-
Yoshihiro Shimoda authored
The SH7763 has GETHER. So the specification of some registers differs than other CPUs. This patch removes almost #ifdef of CONFIG_CPU_SUBTYPE_SH7763. Then we are able to add other CPU's GETHER easily. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yoshihiro Shimoda authored
The defination is hardcoded in this driver for some CPUs. This patch modifies to get resource of TSU address from platform_device. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yoshihiro Shimoda authored
The previous code cannot handle the ETHER and GETHER both as same time because the definitions of register was hardcoded. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Turull authored
(bug introduced by commit 26ad7879 (pktgen: speedup fragmented skbs) The headers of pktgen were incorrectly added in a pktgen packet without frags (frags=0). There was an offset in the pktgen headers. The cause was in reusing the pgh variable as a return variable in skb_put when adding the payload to the skb. Signed-off-by: Daniel Turull <daniel.turull@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
-
Paul Gortmaker authored
Remove bogus semicolon only recently introduced in 34e46258 that blocks cleanup of nodes for N>1 on shutdown. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
-
Eric Dumazet authored
After commit 7b46ac4e (inetpeer: Don't disable BH for initial fast RCU lookup.), we should use call_rcu() to wait proper RCU grace period. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Steffen Klassert authored
This patch adds a netlink based user interface to configure esn and big anti-replay windows. The new netlink attribute XFRMA_REPLAY_ESN_VAL is used to configure the new implementation. If the XFRM_STATE_ESN flag is set, we use esn and support for big anti-replay windows for the configured state. If this flag is not set we use the new implementation with 32 bit sequence numbers. A big anti-replay window can be configured in this case anyway. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Steffen Klassert authored
This patch adds support for IPsec extended sequence numbers (esn) as defined in RFC 4303. The bits to manage the anti-replay window are based on a patch from Alex Badea. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Steffen Klassert authored
As it is, the anti-replay bitmap in struct xfrm_replay_state can only accomodate 32 packets. Even though it is possible to configure anti-replay window sizes up to 255 packets from userspace. So we reject any packet with a sequence number within the configured window but outside the bitmap. With this patch, we represent the anti-replay window as a bitmap of variable length that can be accessed via the new struct xfrm_replay_state_esn. Thus, we have no limit on the window size anymore. To use the new anti-replay window implementantion, new userspace tools are required. We leave the old implementation untouched to stay in sync with old userspace tools. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Steffen Klassert authored
To support multiple versions of replay detection, we move the replay detection functions to a separate file and make them accessible via function pointers contained in the struct xfrm_replay. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Steffen Klassert authored
This patch adds IPsec extended sequence numbers support to esp6. We use the authencesn crypto algorithm to handle esp with separate encryption/authentication algorithms. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Steffen Klassert authored
This patch adds IPsec extended sequence numbers support to esp4. We use the authencesn crypto algorithm to handle esp with separate encryption/authentication algorithms. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Steffen Klassert authored
To support IPsec extended sequence numbers, we split the output sequence numbers of xfrm_skb_cb in low and high order 32 bits and we add the high order 32 bits to the input sequence numbers. All users are updated accordingly. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Steffen Klassert authored
This patch adds the struct xfrm_replay_state_esn which will be used to support IPsec extended sequence numbers and anti replay windows bigger than 32 packets. Also we add a function that returns the actual size of the xfrm_replay_state_esn, a xfrm netlink atribute and a xfrm state flag for the use of extended sequence numbers. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Steffen Klassert authored
ESP with separate encryption/authentication algorithms needs a special treatment for the associated data. This patch add a new algorithm that handles esp with extended sequence numbers. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hiroaki SHIMODA authored
On current net-next-2.6, when Linux receives ICMP Type: 3, Code: 4 (Destination unreachable (Fragmentation needed)), icmp_unreach -> ip_rt_frag_needed (peer->pmtu_expires is set here) -> tcp_v4_err -> do_pmtu_discovery -> ip_rt_update_pmtu (peer->pmtu_expires is already set, so check_peer_pmtu is skipped.) -> check_peer_pmtu check_peer_pmtu is skipped and MTU is not updated. To fix this, let check_peer_pmtu execute unconditionally. And some minor fixes 1) Avoid potential peer->pmtu_expires set to be zero. 2) In check_peer_pmtu, argument of time_before is reversed. 3) check_peer_pmtu expects peer->pmtu_orig is initialized as zero, but not initialized. Signed-off-by: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 13 Mar, 2011 22 commits
-
-
Allan Stephens authored
Updates TIPC maintenance information to reflect changes that have taken place during TIPC 2.0 development, including: - removal of directories that have been deleted - removal of websites that have been decommisioned - removal of sidestream SCM repositories that are no longer used - addition of netdev as appropriate list for kernel code. Grateful acknowledgement is given to Joe Perches <joe@perches.com>, who reported the stale file entry that triggered the update. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
-
Allan Stephens authored
Eliminates a routine that is used in handling messages arriving from another cluster or zone. Such messages can no longer be received by TIPC now that multi-cluster and multi-zone network support has been eliminated. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
-
Allan Stephens authored
Gets rid of all remaining code relating to ROUTE_DISTRIBUTOR messages. These messages were only used in multi-cluster and multi-zone networks, which TIPC no longer supports. (For safety, TIPC now treats such messages the same way that it handles other unrecognized messages.) Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
-
Allan Stephens authored
Eliminates the flag in the TIPC bearer structure that indicates if the bearer supports broadcasting, since the flag is always set to 1 and serves no useful purpose. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
-
Allan Stephens authored
Adds a check to prevent TIPC from trying to respond to an incoming LINK_CONFIG request message if the associated bearer is currently prohibited from sending messages. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
-
Allan Stephens authored
Eliminates an unnecessary constant that defines the size of a LINK_CONFIG message, and uses one of the existing standard message size symbols in its place. (The defunct constant was located in the wrong place anyway, since it was grouped with other constants that define message users instead of message sizes.) Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
-
Allan Stephens authored
Eliminates a field in TIPC's bearer objects that is set, but never referenced. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
-
Allan Stephens authored
Renames items that are improperly labelled as "network scope" items (which are represented by simple integer values) rather than "network domain" items (which are represented by <Z.C.N>-type network addresses). This change is purely cosmetic, and does not affect the operation of TIPC. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
-
Allan Stephens authored
Enhances link creation code as follows: 1) Detects illegal attempts to add a requested link earlier in the link creation process. This prevents TIPC from wasting time initializing a link object it then throws away, and also eliminates the code needed to do the throwing away. 2) Passes in the node object associated with the requested link. This allows TIPC to eliminate a search to locate the node object, as well as code that attempted to create the node if it doesn't exist. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
-
Allan Stephens authored
Delay releasing the node lock when processing a neighbor discovery message until after the optional discovery response message has been sent. This helps ensure that any link protocol messages sent by a link endpoint created as a result of a neighbor discovery request are received after the discovery response is received, thereby giving the receiving node a chance to create a peer link endpoint to consume those link protocol messages, if one does not already exist. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
-
Allan Stephens authored
Reworks the appearance of the routine that processes incoming LINK_CONFIG messages to keep the main logic flow at a consistent level of indentation, and to add comments outlining the various phases involved in processing each message. This rework is being done to allow upcoming enhancements to this routine to be integrated more cleanly. The diff isn't really readable, so know that it was a case of the old code being like: tipc_disc_recv_msg(..) { if (in_own_cluster(orig)) { ... lines and lines of stuff ... } } which is now replaced with the more sane: tipc_disc_recv_msg(..) { if (!in_own_cluster(orig)) return; ... lines and lines of stuff ... } Instances of spin locking within the reindented block were replaced with the identical tipc_node_[un]lock() abstractions. Note that all these changes are cosmetic in nature, and do not change the way LINK_CONFIG messages are processed. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
-
Allan Stephens authored
Ensures that the "redundant link exists" field of the LINK_PROTOCOL messages sent by a link endpoint is set if and only if the sending node has at least one other working link to the peer node. Previously, the bit was set only if there were at least 2 working links to the peer node, meaning the bit was incorrectly left unset in messages sent by a non-working link endpoint when exactly one alternate working link was available. The revised code now takes the state of the link sending the message into account when deciding if an alternate link exists. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
-
Allan Stephens authored
All the other boolean like msg_set_X(m) operations don't export both a msg_set_X(a) and a msg_clear_X(m), but instead just have the single msg_set_X(m, val) variant. Make the redundant_link one consistent by having the set take a value, and delete the msg_clear_redundant_link() anomoly. This is a cosmetic change and should not change behaviour. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
-
Paul Gortmaker authored
Function names like "tipc_node_has_redundant_links" are unweildy and result in long lines even for simple lines. The "has" doesn't contribute any value add, so dropping that is a slight step in the right direction. This is a cosmetic change, basic result of: for i in `grep -l tipc_node_has_ *` ; do sed -i s/tipc_node_has_/tipc_node_/ $i ; done Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
-
Allan Stephens authored
Removes support for the timestamp field of TIPC's link protocol messages. This field was previously used to hold an OS-dependent timestamp value that was used to assist in debugging early versions of TIPC. The field has now been deemed unnecessary and has been removed from the latest TIPC specification. This change has no impact on the operation of TIPC since the field was set by TIPC, but never referenced. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
-
Allan Stephens authored
Relocates network-related variables into the subsystem files where they are now primarily used (following the recent rework of TIPC's node table), and converts globals into locals where possible. Changes the initialization of tipc_num_links from run-time to compile-time, and eliminates the net_start routine that becomes empty as a result. Also eliminates the corresponding net_stop routine by moving its (trivial) content into the one location that called the routine. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
-
Allan Stephens authored
Replaces the dynamically allocated array of pointers to the cluster's node objects with a static hash table. Hash collisions are resolved using chaining, with a typical hash chain having only a single node, to avoid degrading performance during processing of incoming packets. The conversion to a hash table reduces the memory requirements for TIPC's node table to approximately the same size it had prior to the previous commit. In addition to the hash table itself, TIPC now also maintains a linked list for the node objects, sorted by ascending network address. This list allows TIPC to continue sending responses to user space applications that request node and link information in sorted order. The list also improves performance when name table update messages are sent by making it easier to identify the nodes that must be notified. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
-
Allan Stephens authored
Gets rid of the need for users to specify the maximum number of cluster nodes supported by TIPC. TIPC now automatically provides support for all 4K nodes allowed by its addressing scheme. Note: This change sets TIPC's memory usage to the amount used by a maximum size node table with 4K entries. An upcoming patch that converts the node table from a linear array to a hash table will compact the node table to a more efficient design, but for clarity it is nice to have all the Kconfig infrastruture go away separately. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
-
Allan Stephens authored
Converts the fields of the global "tipc_net" structure into individual variables. Since the struct was never referenced as a complete unit, its existence was pointless. This will facilitate upcoming changes to TIPC's node table and simpify upcoming relocation of the variables so they are only visible to the files that actually use them. This change is essentially cosmetic in nature, and doesn't affect the operation of TIPC. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
-
Allan Stephens authored
Removes a race condition that could cause TIPC's internal counter of the number of links it has to neighboring nodes to have the incorrect value if two independent threads of control simultaneously create new link endpoints connecting to two different nodes using two different bearers. Such under counting would result in TIPC failing to list the final link(s) in its response to a configuration request to list all of the node's links. The counter is now updated atomically to ensure that simultaneous increments do not interfere with each other. Thanks go to Peter Butler <pbutler@pt.com> for his assistance in diagnosing and fixing this problem. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
-
Allan Stephens authored
Adds support for the SO_RCVTIMEO socket option to TIPC's socket receive routines. Thanks go out to Raj Hegde <rajenhegde@yahoo.ca> for his contribution to the development and testing this enhancement. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
-
Allan Stephens authored
Relocates the code that notifies users of node subscriptions so that it is adjacent to the rest of the routines that implement TIPC's node subscription capability. Renames the name table routine that is invoked by a node subscription to better reflect its purpose and to be consistent with other, similar name table routines. These changes are cosmetic in nature, and do not alter the behavior of TIPC. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
-