- 12 Mar, 2009 21 commits
-
-
Tony Battersby authored
sg has the following problems related to device removal: * opening a sg fd races with removing a device * closing a sg fd races with removing a device * /proc/scsi/sg/* access races with removing a device * command completion races with removing a device * command completion races with closing a sg fd * can rmmod sg with active commands These problems can cause kernel oopses, memory-use-after-free, or double-free errors. This patch fixes these problems by using krefs to manage the lifetime of sg_device and sg_fd. Each command submitted to the midlevel holds a reference to sg_fd until the completion callback. This ensures that sg_fd doesn't go away if the fd is closed with commands still outstanding. sg_fd gets the reference of sg_device (with scsi_device) and also makes sure that the sg module doesn't go away. /proc/scsi/sg/* functions don't play nicely with krefs because they give information about sg_fds which have been closed but not yet freed due to still having outstanding commands and sg_devices which have been removed but not yet freed due to still being referenced by one or more sg_fds. To deal with this safely without removing functionality, /proc functions now access sg_device and sg_fd while holding a lock instead of using kref_get()/kref_put(). Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Ed Lin - PTU authored
Update version to 4.6.0000.1 Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Ed Lin - PTU authored
Some small fixes, including: - add data direction in req_msg because new firmware version may require this (backward compatible) - change internal timeout value - change judgment of type st_vsc1 - blank line handling, etc. Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Ed Lin - PTU authored
This is the fix for controller type st_yosemite, including - max_lun is 256 (backward compatible) - remove unneeded special handling of INQUIRY - remove unnecessary listing of sub device ids Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Ed Lin - PTU authored
Add new device id for controller type st_seq. Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Ed Lin - PTU authored
The interrupt routine is good for normal cases. However, if the firmware is abnormal and returns an invalid response, the driver may reuse a ccb structure that has already been handled. This may cause problem. Fix this by setting the req member to NULL. Next time we know the response is invalid and handle accordingly if req is NULL. Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
James Bottomley authored
Fix up remaining bit of SUGGEST flag removal done by patch commit 0f10274300857d98ea5ea4c800c561a9ad9ac89f Author: Martin K. Petersen <martin.petersen@oracle.com> Date: Sun Jan 4 03:14:11 2009 -0500 [SCSI] Remove SUGGEST flags Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Martin K. Petersen authored
The SUGGEST_* flags in the SCSI command result have been out of fashion for a while and we don't actually use them in the error handling. Remove the remaining occurrences. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Wayne Boyer authored
Enable MSI if available/supported. Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Christof Schmitt authored
Fix typo by adding closing parenthesis. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Aaro Koskinen authored
(The patch updated based on testing and comments from Tony Battersby.) Change the sym53c8xx_2 driver negotiation logic so that the driver will tolerate better device removals. Negotiation message(s) will be sent with every INQUIRY and REQUEST SENSE command, and whenever there is a change in goals or when the device reports check condition. The patch was made specifically to address the case where you hotswap the disk using remove-single-device/add-single-device commands through /proc/scsi/scsi. Without the patch the driver keeps using old transfer parameters even though the target is reset and reports check condition, so the data transfer of the very first INQUIRY will fail. Signed-off-by: Aaro Koskinen <Aaro.Koskinen@nokia.com> Tested-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Robert Love authored
The Kconfig entry for SCSI_LOGGING refers the reader to drivers/scsi/scsi.c, but I didn't find any useful information there. There is certainly logging code in that file, but the logging types and logging levels are described in drivers/scsi/scsi_logging.h. Also, the procfs file referred to in the section is incorrect. It should be /proc/sys/dev/scsi/logging_level and not /proc/scsi/scsi. Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Hannes Reinecke authored
scsi_device_online() is not just a negation of SDEV_OFFLINE, also devices in state SDEV_DEL are actually offline. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Jan Engelhardt authored
Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Acked-by: James Smart <James.Smart@Emulex.Com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
FUJITA Tomonori authored
I got the following warnings on IA64: drivers/scsi/libfc/fc_lport.c: In function 'fc_lport_recv_flogi_req': drivers/scsi/libfc/fc_lport.c:788: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'u64' drivers/scsi/libfc/fc_lport.c:792: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'u64' scsi/libfc/fc_rport.c: In function 'fc_rport_recv_plogi_req': /home/fujita/git/linux-2.6/drivers/scsi/libfc/fc_rport.c:968: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64' Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Randy Dunlap authored
libfc uses crc32 functions, so cause it to be built via select: drivers/built-in.o: In function `fc_frame_crc_check': (.text+0x75dae): undefined reference to `crc32_le' drivers/built-in.o: In function `fc_fcp_recv': fc_fcp.c:(.text+0x7b919): undefined reference to `crc32_le' fc_fcp.c:(.text+0x7b9d5): undefined reference to `crc32_le' fc_fcp.c:(.text+0x7ba54): undefined reference to `crc32_le' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Randy Dunlap authored
Fix scsi_debug build error: drivers/built-in.o: In function `resp_read': scsi_debug.c:(.text+0x21379a): undefined reference to `crc_t10dif' drivers/built-in.o: In function `resp_write': scsi_debug.c:(.text+0x213fca): undefined reference to `crc_t10dif' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Martin K. Petersen authored
This patch adds support for DIX and DIF in scsi_debug. A separate buffer is allocated for the protection information. - The dix parameter indicates whether the controller supports DIX (protection information DMA) - The dif parameter indicates whether the simulated storage device supports DIF - The guard parameter switches between T10 CRC(0) and IP checksum(1) - The ato parameter indicates whether the application tag is owned by the disk(0) or the OS(1) - DIF and DIX errors can be triggered using the scsi_debug_opts mask Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Randy Dunlap authored
Warning(linux-2.6.28-git13//drivers/scsi/scsi_sysfs.c:1049): Excess function parameter 'dev' description in 'scsi_sysfs_add_host' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Matthew Wilcox authored
SES had its own code to retrieve VPD from devices; convert it to use the new scsi_get_vpd_page helper. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Matthew Wilcox authored
Based on prior work by Martin Petersen and James Bottomley, this patch adds a generic helper for retrieving VPD pages from SCSI devices. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
- 10 Mar, 2009 17 commits
-
-
Andrew Vasquez authored
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Andrew Vasquez authored
The value is already pre-assigned prior to the qla2x00_mem_alloc(). Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Andrew Vasquez authored
QLA_* return codes are 'int' in size. There were still several legacy check-points which assumed a return-code width of 8-bits. This could cause incorrect assumptions of 'good' status if a return of QLA_FUNCTION_TIMEOUT. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Anirban Chakraborty authored
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Lalit Chandivade authored
Use minimum value for max vport during firmware initialization in LOOP topology. Using max vport value from get resource count in LOOP topology causes firmware initialization failure. Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Andrew Vasquez authored
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Robert Love authored
This change makes the fcoe Rx threads have the same nice value as lpfc and qla2xxx Rx threads. Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Chris Leech authored
In fcoe_check_wait_queue() the queue length could temporarily drop to 0, before the last frame was successfully sent. This resulted in out of order data frames within a single sequence, leading to IO timeout errors. This builds on the approach from Vasu Dev to only fix the queue management in fcoe_check_wait_queue, where my first patch added locking to the transmit path even when the pending queue was not in use. This patch continues to use fcoe_pending_queue.qlen instead of introducing a new length counter, but takes precautions to ensure it never drops to 0 before the final frame in the queue has successfully been passed to the netdev qdisc layer. It also includes some cleanup of fcoe_check_wait_queue and removes the fcoe_insert_wait_queue(_head) wrapper functions. Signed-off-by: Chris Leech <christopher.leech@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Vasu Dev authored
frames followed by these errors in log. [sdp] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [sdp] Sense Key : Aborted Command [current] [sdp] Add. Sense: Data phase error This was causing some test apps to exit due to write failure under heavy load. This was due to a race around adding and removing tx frame skb in fcoe_pending_queue, Chris Leech helped me to find that brief unlocking period when pulling skb from fcoe_pending_queue in various contexts (fcoe_watchdog and fcoe_xmit) and then adding skb back into fcoe_pending_queue up on a failed fcoe_start_io could change skb/tx frame order in fcoe_pending_queue. Thanks Chris. This patch allows only single context to pull skb from fcoe_pending_queue at any time to prevent above described ordering issue/race by use of fcoe_pending_queue_active flag. This patch simplified fcoe_watchdog with modified fcoe_check_wait_queue by use of FCOE_LOW_QUEUE_DEPTH instead previously used several conditionals to clear and set lp->qfull. I think FCOE_MAX_QUEUE_DEPTH with FCOE_LOW_QUEUE_DEPTH will work better in re/setting lp->qfull and these could be fine tuned for performance. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Roel Kluin authored
Use kfree_skb instead of kfree for struct sk_buff pointers. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Yi Zou authored
Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Yi Zou authored
We shouldn't be altering inbound frames. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Robert Love authored
The registration function shouldn't initialize the mutex or list head. The fcoe SW transport should initialize itself before registering. Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Robert Love authored
Use helper functions for watchdog timer setup. Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Robert Love authored
Comment from "Andrew Morton <akpm@linux-foundation.org>" > +{ > + return (struct fcoe_softc *)lport_priv(lp); unneeded/undesirable cast of void*. There are probably zillions of instances of this - there always are. This whole inline function was unnecessary. The FCoE layer knows that it's data structure is stored in the lport private data, it can just access it from lport_priv(). Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Robert Love authored
1) There were a few functions with a strange layout, i.e. all arguments on the second line, when not necessary. Where ever possible I moved the return value to the same line as the function name. However, when the line was too long to have a single argument on the same line I moved the return value to above line. For example: <short return> <function name>(<arg 1>, <arg2>) and <very long return value> <function name>(<arg1>, <arg2>) 2) Removed one extra whitespace line 3) Fixed two typos Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Robert Love authored
1) Added '()' for function names in kerneldoc comments 2) Changed comment bookends from '**/' to '*/'. The comment on the the mailing list was that '**/' "is consistently unconventional. Not wrong, just odd." The Documentation/kernel-doc-nano-HOWTO.txt states that kerneldoc comment blocks should end with '**/' but most (if not all) instance I found under drivers/scsi/ were only using the '*/' so I converted to that style. 3) Removed incorrect linebreaks in kerneldoc comments where found 4) Removed a few unnecessary blank comment lines in kerneldoc comment blocks Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
- 06 Mar, 2009 2 commits
-
-
Robert Love authored
Made the comments more like the comments for struct scsi_host_template. Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Robert Love authored
If we've just created an interface and the an rport is logging in we may have a request on the wire (say PRLI). If we destroy the interface, we'll go through each rport on the disc->rports list and set each rport's state to NONE. Then the lport will reset the EM. The EM reset will send a CLOSED event to the prli_resp() handler which will notice that the state != PRLI. In this case it frees the frame pointer, decrements the refcount and unlocks the rport. The problem is that there isn't a frame in this case. It's just a pointer with an embedded error code. The free causes an Oops. This patch moves the error checking to be before the state checking. Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-