GitLab

Explicitly forbid creating map of per-cpu cgroup local storages.
This behavior matches the behavior of shared cgroup storages.
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

This commit introduced per-cpu cgroup local storage.

Per-cpu cgroup local storage is very similar to simple cgroup storage
(let's call it shared), except all the data is per-cpu.

The main goal of per-cpu variant is to implement super fast
counters (e.g. packet counters), which don't require neither
lookups, neither atomic operations.

>From userspace's point of view, accessing a per-cpu cgroup storage
is similar to other per-cpu map types (e.g. per-cpu hashmaps and
arrays).

Writing to a per-cpu cgroup storage is not atomic, but is performed
by copying longs, so some minimal atomicity is here, exactly
as with other per-cpu maps.
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

To simplify the following introduction of per-cpu cgroup storage,
let's rework a bit a mechanism of passing a pointer to a cgroup
storage into the bpf_get_local_storage(). Let's save a pointer
to the corresponding bpf_cgroup_storage structure, instead of
a pointer to the actual buffer.

It will help us to handle per-cpu storage later, which has
a different way of accessing to the actual data.
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

In order to introduce per-cpu cgroup storage, let's generalize
bpf cgroup core to support multiple cgroup storage types.
Potentially, per-node cgroup storage can be added later.

This commit is mostly a formal change that replaces
cgroup_storage pointer with a array of cgroup_storage pointers.
It doesn't actually introduce a new storage type,
it will be done later.

Each bpf program is now able to have one cgroup storage of each type.
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Currently, helper bpf_get_current_cgroup_id() is not permitted
for CGROUP_DEVICE type of programs. If the helper is used
in such cases, the verifier will log the following error:

  0: (bf) r6 = r1
  1: (69) r7 = *(u16 *)(r6 +0)
  2: (85) call bpf_get_current_cgroup_id#80
  unknown func bpf_get_current_cgroup_id#80

The bpf_get_current_cgroup_id() is useful for CGROUP_DEVICE
type of programs in order to customize action based on cgroup id.
This patch added such a support.

Cc: Roman Gushchin <guro@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Andrey Ignatov says:

====================
This patch set introduces libbpf_attach_type_by_name function in libbpf
to identify attach type by section name.

This is useful to avoid writing same logic over and over again in user
space applications that leverage libbpf.

Patch 1 has more details on the new function and problem being solved.
Patches 2 and 3 add support for new section names.
Patch 4 uses new function in a selftest.
Patch 5 adds selftest for libbpf_{prog,attach}_type_by_name.

As a side note there are a lot of inconsistencies now between names used
by libbpf and bpftool (e.g. cgroup/skb vs cgroup_skb, cgroup_device and
device vs cgroup/dev, sockops vs sock_ops, etc). This patch set does not
address it but it tries not to make it harder to address it in the future.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Add selftest for libbpf functions libbpf_prog_type_by_name and
libbpf_attach_type_by_name.

Example of output:
  % ./tools/testing/selftests/bpf/test_section_names
  Summary: 35 PASSED, 0 FAILED
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Use newly introduced libbpf_attach_type_by_name in test_socket_cookie
selftest.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Add section names for BPF_SK_SKB_STREAM_PARSER and
BPF_SK_SKB_STREAM_VERDICT attach types to be able to identify them in
libbpf_attach_type_by_name.

"stream_parser" and "stream_verdict" are used instead of simple "parser"
and "verdict" just to avoid possible confusion in a place where attach
type is used alone (e.g. in bpftool's show sub-commands) since there is
another attach point that can be named as "verdict": BPF_SK_MSG_VERDICT.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Add section names for BPF_CGROUP_INET_INGRESS and BPF_CGROUP_INET_EGRESS
attach types to be able to identify them in libbpf_attach_type_by_name.

"cgroup_skb" is used instead of "cgroup/skb" mostly to easy possible
unifying of how libbpf and bpftool works with section names:
* bpftool uses "cgroup_skb" to in "prog list" sub-command;
* bpftool uses "ingress" and "egress" in "cgroup list" sub-command;
* having two parts instead of three in a string like "cgroup_skb/ingress"
  can be leveraged to split it to prog_type part and attach_type part,
  or vise versa: use two parts to make a section name.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

There is a common use-case when ELF object contains multiple BPF
programs and every program has its own section name. If it's cgroup-bpf
then programs have to be 1) loaded and 2) attached to a cgroup.

It's convenient to have information necessary to load BPF program
together with program itself. This is where section name works fine in
conjunction with libbpf_prog_type_by_name that identifies prog_type and
expected_attach_type and these can be used with BPF_PROG_LOAD.

But there is currently no way to identify attach_type by section name
and it leads to messy code in user space that reinvents guessing logic
every time it has to identify attach type to use with BPF_PROG_ATTACH.

The patch introduces libbpf_attach_type_by_name that guesses attach type
by section name if a program can be attached.

The difference between expected_attach_type provided by
libbpf_prog_type_by_name and attach_type provided by
libbpf_attach_type_by_name is the former is used at BPF_PROG_LOAD time
and can be zero if a program of prog_type X has only one corresponding
attach type Y whether the latter provides specific attach type to use
with BPF_PROG_ATTACH.

No new section names were added to section_names array. Only existing
ones were reorganized and attach_type was added where appropriate.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Latest changes in __skb_flow_dissect() assume skb->dev has valid nd_net.
However, this is not true for test_bpf. As a result, test_bpf.ko crashes
the system with the following stack trace:

[ 1133.716622] BUG: unable to handle kernel paging request at 0000000000001030
[ 1133.716623] PGD 8000001fbf7ee067
[ 1133.716624] P4D 8000001fbf7ee067
[ 1133.716624] PUD 1f6c1cf067
[ 1133.716625] PMD 0
[ 1133.716628] Oops: 0000 [#1] SMP PTI
[ 1133.716630] CPU: 7 PID: 40473 Comm: modprobe Kdump: loaded Not tainted 4.19.0-rc5-00805-gca11cc92ccd2 #1167
[ 1133.716631] Hardware name: Wiwynn Leopard-Orv2/Leopard-DDR BW, BIOS LBM12.5 12/06/2017
[ 1133.716638] RIP: 0010:__skb_flow_dissect+0x83/0x1680
[ 1133.716639] Code: 04 00 00 41 0f b7 44 24 04 48 85 db 4d 8d 14 07 0f 84 01 02 00 00 48 8b 43 10 48 85 c0 0f 84 e5 01 00 00 48 8b 80 a8 04 00 00 <48> 8b 90 30 10 00 00 48 85 d2 0f 84 dd 01 00 00 31 c0 b9 05 00 00
[ 1133.716640] RSP: 0018:ffffc900303c7a80 EFLAGS: 00010282
[ 11...

Print `bpftool net` output to stdout instead of stderr. Only errors
should be printed to stderr. Regular output should go to stdout and this
is what all other subcommands of bpftool do, including --json and
--pretty formats of `bpftool net` itself.

Fixes: commit f6f3bac0

 ("tools/bpf: bpftool: add net support")
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

(the parameters in question are mark and flow_flags)
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

(the parameters in question are mark and flow_flags)
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The mvneta controller can handle speeds up to 2500Mbps on the SGMII
interface. This relies on serdes configuration, the lane must be
configured at 3.125Gbps and we can't use in-band autoneg at that speed.

The main issue when supporting that speed on this particular controller
is that the link partner can send ethernet frames with a shortened
preamble, which if not explicitly enabled in the controller will cause
unexpected behaviours.

This was tested on Armada 385, with the comphy configuration done in
bootloader.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tonghao Zhang says:

====================
net: vhost: improve performance when enable busyloop

This patches improve the guest receive performance.
On the handle_tx side, we poll the sock receive queue
at the same time. handle_rx do that in the same way.

For more performance report, see patch 4
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch improves the guest receive performance.
On the handle_tx side, we poll the sock receive queue at the
same time. handle_rx do that in the same way.

We set the poll-us=100us and use the netperf to test throughput
and mean latency. When running the tests, the vhost-net kthread
of that VM, is alway 100% CPU. The commands are shown as below.

Rx performance is greatly improved by this patch. There is not
notable performance change on tx with this series though. This
patch is useful for bi-directional traffic.

netperf -H IP -t TCP_STREAM -l 20 -- -O "THROUGHPUT, THROUGHPUT_UNITS, MEAN_LATENCY"

Topology:
[Host] ->linux bridge -> tap vhost-net ->[Guest]

TCP_STREAM:
* Without the patch:  19842.95 Mbps, 6.50 us mean latency
* With the patch:     37598.20 Mbps, 3.43 us mean latency
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Factor out generic busy polling logic and will be
used for in tx path in the next patch. And with the patch,
qemu can set differently the busyloop_timeout for rx queue.

To avoid duplicate codes, introduce the helper functions:
* sock_has_rx_data(changed from sk_has_rx_data)
* vhost_net_busy_poll_try_queue
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the VHOST_NET_VQ_XXX as a subclass for mutex_lock_nested.
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch changes the way that lock all vqs
at the same, to lock them one by one. It will
be used for next patch to avoid the deadlock.
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After sk_state exposed, we can get in which state this retransmission
occurs. That could give us more detail for dignostic.
For example, if this retransmission occurs in SYN_SENT state, it may
also indicates that the syn packet may be dropped on the remote peer due
to syn backlog queue full and then we could check the remote peer.

BTW,SYNACK retransmission is traced in tcp_retransmit_synack tracepoint.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.

Found by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.

Found by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Trival cleanup, list_move_tail will implement the same function that
list_del() + list_add_tail() will do. hence just replace them.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Trival cleanup, list_move_tail will implement the same function that
list_del() + list_add_tail() will do. hence just replace them.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Nikolay Aleksandrov says:

====================
net: bridge: convert bool options to bits

A lot of boolean bridge options have been added around the net_bridge
structure resulting in holes and more importantly different cache lines
that need to be fetched in the fast path. This set moves all of those
to bits in a bitfield which resides in a hot cache line thus reducing
the size of net_bridge, the number of holes and the number of cache
lines needed for the fast path.
The set is also sent in preparation for new boolean options to avoid
spreading them in the structure and making new holes.
One nice side-effect is that we avoid potential race conditions by using
the bitops since some of the options were bits being directly set in
parallel risking hard to debug issues (has_ipv6_addr).

Before:
 size: 1184, holes: 8, sum holes: 30
After:
 size: 1160, holes: 3, sum holes: 7

Patch 01 is a trivial style fix
Patch 02 adds the new options bitfield and converts the vlan boolean
         options to bits
Patches 03-08 convert the rest of the boolean options to bits
Patch 09 re-arranges a few fields in net_bridge to further reduce size

v2: patch 09: remove the comment about offload_fwd_mark in net_bridge and
    leave it where it is now, thanks to Ido for spotting it
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Further reduce the size of net_bridge with 8 bytes and reduce the number of
holes in it:
 Before: holes: 5, sum holes: 15
 After: holes: 3, sum holes: 7
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert the last remaining bool option to a bit thus reducing the overall
net_bridge size further by 8 bytes.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert the neigh_suppress_enabled option to a bit.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch converts the rest of the mcast options to bits. It also packs
the mcast options a little better by moving multicast_mld_version to an
existing hole, reducing the net_bridge size by 8 bytes.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert mcast disabled to an option bit and while doing so convert the
logic to check if multicast is enabled instead. That is make the logic
follow the option value - if it's set then mcast is enabled and vice versa.
This avoids a few confusing places where we inverted the value that's being
set to follow the mcast_disabled logic.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert group_addr_set internal bridge opt to a bit.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

No functional change, convert of nf_call_[ip|ip6|arp]tables to bits.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Bridge options have usually been added as separate fields all over the
net_bridge struct taking up space and ending up in different cache lines.
Let's move them to a single bitfield to save up space and speedup lookups.
This patch adds a simple API for option modifying and retrieving using
bitops and converts the first user of the API - the bridge vlan options
(vlan_enabled and vlan_stats_enabled).
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently we have a mix of opening brackets on new lines and on the same
line, let's move them all on the same line.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Julian Wiedmann says:

====================
s390/net: updates 2018-09-26

please apply one more series of cleanups and small improvements for qeth
to net-next. Note that one patch needs to touch both af_iucv and qeth, in
order to untangle their receive paths.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The netdevice is always available, apply any carrier state changes to it
without caching them.
On a STARTLAN event (ie. carrier-up), defer updating the state to
qeth_core_hardsetup_card() in the subsequent recovery action.

Also remove the carrier-state checks from the xmit routines. Stopping
transmission on carrier-down is the responsibility of upper-level code
(eg see dev_direct_xmit()).
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If qeth_check_ipa_data() consumed an event, there's no point in
processing it further. So drop it early, and make the surrounding code
a tiny bit more readable.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull one level of checking up into qeth_send_control_data_cb(), and
clean up an else-after-return. No functional change.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>