- 09 Sep, 2005 27 commits
-
-
Rumen Ivanov Zarev authored
Trivial patch against 2.6.13 to unhide SMBus on Compaq Evo N620c laptop using Intel 82855PM chipset. Signed-off-by:
Rumen Zarev <rzarev@caltech.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Rajesh Shah authored
Martin Franc reported that the pciehp driver was not enabling bus master capability on his hot-plugged card. pciehprm_enable_card() was updating the PCI command register only if _HPP indicated a value for SERR or PERR that was different from the current setting. I don't have hardware that reproduces this problem, but Martin reports that this patch fixes the problem for him. Signed-off-by:
Rajesh Shah <rajesh.shah@intel.com> Signed-off-by:
-
Dave Jones authored
Self explanatory really. Some newer gcc's print a warning if a function is used and we don't check its result. We do this for a bunch of things in the kernel already, this extends that to the PCI layer. Based on a patch originally from Arjan van de Ven. Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
Arjan van de Ven <arjan@infradead.org> Signed-off-by:
-
Greg Kroah-Hartman authored
This fixes a bug in the environment variables for all PCI device hotplug calls. Thanks to Kay Sievers for pointing out the problem. Signed-off-by: -
Brett M Russ authored
Previous INTx cleanup patch had a bug that was not caught. I found this last night during testing and can confirm that it is now 100% working. Signed-off-by:
Brett Russ <russb@emc.com> Signed-off-by:
Jeff Garzik <jgarzik@pobox.com> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Anton Altaparmakov authored
-
Linus Torvalds authored
-
-
Jeff Garzik authored
* sata_mv: remove pci_intx(), now that the same function is in PCI core * sata_sis: fix variable initialization bug, trim trailing whitespace
-
Nathan Scott authored
Signed-off-by:Nathan Scott <nathans@sgi.com>
-
Greg Ungerer authored
Rework the 68x328 configuration and setup code. All 68x328 varients share the same timer hardware. So extract that into its own file, instead of keeping copies in each processors setup code. Signed-off-by:
Greg Ungerer <gerg@uclinux.com> Signed-off-by:
-
Greg Ungerer authored
Include the ColdFire 523x register definitions when compiling for that target processor. Signed-off-by:
-
Greg Ungerer authored
Create common timer code for all 68x328 processor varients. Signed-off-by:
-
Greg Ungerer authored
The boot loader on the MOD5272 board doesn't set the register maping, so set it in the 5272 init code. There was code in there to support this, but we had never needed to use it before. Signed-off-by:
-
Greg Ungerer authored
Add timer support for the ColdFire 523x processor family. (It uses the ColdFire PIT timer hardware, so we just build that in). Signed-off-by:
-
Greg Ungerer authored
Add support definitions for the integrated UARTs on the 523x ColdFire processor family. Signed-off-by:
-
Greg Ungerer authored
Rework the 68x328 configuration and setup code. All 68x328 varient share the same timer hardware, so extract that into its own file, instead of keeping copies in each processors setup code. Signed-off-by:
-
Greg Ungerer authored
Create common 68VZ328 config code. It is essentially the same for all boards that use this, so no point having a version of it for each. Signed-off-by:
-
Greg Ungerer authored
Remove DragonEngine2 specific config code. Use common 68VZ328 config code now. Signed-off-by:
-
Greg Ungerer authored
Remove uCdimm specific config code. Use common 68VZ328 config code now. Signed-off-by:
-
Greg Ungerer authored
Signed-off-by:
-
Greg Ungerer authored
Add processor level and clock support defines for the ColdFire 523x processor. Signed-off-by:
-
Greg Ungerer authored
ColdFire 523x processor hardware register definitions. Signed-off-by:
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Linus Torvalds authored
-
- 08 Sep, 2005 13 commits
-
-
Henk authored
Signed-off-by:
Henk Vergonet <henk.vergonet@gmail.com> Signed-off-by:
-
Greg Kroah-Hartman authored
sparse still complains about the htons usage, but I'll leave that for others to fix. Signed-off-by: -
Henk authored
This patch aggregates all modifications in the -mm tree and adds complete ringtone support. The following features are supported: - keyboard full support - LCD full support - LED full support - dialtone full support - ringtone full support - audio playback via generic usb audio diver - audio record via generic usb audio diver For driver documentation see: Documentation/input/yealink.txt For vendor documentation see: http://yealink.comSigned-off-by:
-
Nick Sillik authored
As sugested by Alan Stern here are a few code cleanups for onetouch.c: -Check number of endpoints before directly referencing intf->endpoint[2] -Use defined constants instead of magic numbers -Revmove the non-ascii characters from copyright notice -Make registration and deregistration messages more similar Signed-off-by:
Nick Sillik <n.sillik@temple.edu> Signed-off-by:
-
Pete Zaitcev authored
This code looks at urb->transfer_dma, maps the page and takes the data. I am looking for volunteers to contribute architectures other than i386 or to develop an architecure-neutral API for it (or point me that it was done already). Signed-off-by:
Pete Zaitcev <zaitcev@redhat.com> Signed-off-by:
-
david-b@pacbell.net authored
This adds the field tt_usecs to ehci_qh and ehci_iso_stream, and sets it appropriately when setting them up as periodic endpoints. It records the transation translator's think_time (added in last patch) plus the downstream (i.e. low or full speed) bustime of the transfer associated with each interrupt or iso frame, as calculated by usb_calc_bus_time. Signed-off-by:
Dan Streetman <ddstreet@ieee.org> Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
david-b@pacbell.net authored
This adds think_time to the usb_tt struct and sets it appropriately (measured in ns); this can help us implement better split transaction scheduling. Signed-off-by:
-
David Brownell authored
This wraps up the conversion of the "usbnet" driver structure, by moving the Prolific PL-2201/2302 minidriver to a module of its own. It also includes some minor cleanups to the remaining "usbnet" file, notably removing that long changelog at the top. Minor historical note: Linux 2.2 first called the driver for this hardware "plusb". Signed-off-by:
-
David Brownell authored
This adds host-side RNDIS support to the "usbnet" driver, so Linux can talk to various devices (often based on WinCE) that otherwise only Windows could talk to. Tested with little-endian Linux talking to a Linux-USB Ethernet/RNDIS based peripheral. This also includes updates from Eddie C. Dost <ecd@brainaid.de> for big-endian SPARC Linux talking to a Nokia 9500 Communicator. It's still marked as EXPERIMENTAL because this code is so young. This ought to let Linux to work with various cable modems that previously would have been "Windows Only". Signed-off-by:
-
David Brownell authored
Makes the CDC Ethernet support live in a separate driver module. This module is a bit special since it exports utility functions that are reused by the the Zaurus and RNDIS drivers, but it's not "core" like usbnet itself. Signed-off-by:
-
David Brownell authored
This moves usbnet support for Zaurus and compatibles into its own module. Other than exporting a couple of helper functions, this just involved shuffling some code and updating the comments. Signed-off-by:
-
David Brownell authored
This moves the GeneSys GL620USB-A support into its own driver file. It also fixes a "return wrong skb" glitch in the rx unbatching, as recently reported, and adds some missing byteswaps in the special "genelink" headers (so it might now work on big-endian Linux). Signed-off-by:
-
David Brownell authored
As with the "cdc_subset" and "asix" drivers, this just moves the net1080 support into its one driver module. In this case there's a small bit of extra cleanup involved, moving some funky framing logic into the tx_fixup() routine (resolving a long overdue FIXME). Minor historical note: "usbnet" started out as "net1080", then got generalized to make it easier for other network drivers to reuse the urb queueing and fault management code here. Signed-off-by:
-
