- 07 Apr, 2017 40 commits
-
-
Sean Wang authored
Add device-tree binding for Mediatek MT7530 switch. Cc: devicetree@vger.kernel.org Signed-off-by:
Sean Wang <sean.wang@mediatek.com> Acked-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Larysch authored
inet_rtm_getroute synthesizes a skeletal ICMP skb, which is passed to ip_route_input when iif is given. If a multipath route is present for the designated destination, fib_multipath_hash ends up being called with that skb. However, as that skb contains no information beyond the protocol type, the calculated hash does not match the one we would see for a real packet. There is currently no way to fix this for layer 4 hashing, as RTM_GETROUTE doesn't have the necessary information to create layer 4 headers. To fix this for layer 3 hashing, set appropriate saddr/daddrs in the skb and also change the protocol to UDP to avoid special treatment for ICMP. Signed-off-by:
Florian Larysch <fl@n621.de> Signed-off-by:
-
David S. Miller authored
Joao Pinto says: ==================== net: stmmac: adding multiple buffers This patch adds multiple buffers to stmmac in a more fragmented way, in order to make problem debug easier. I would kindly request to people to test this patch in their HWs in order to check if everything's functional. Thank you. ==================== Tested-by:
Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by:
-
Joao Pinto authored
This patch adds the napi variable to the stmmac_rx_queue structure and forces that operations like netif_queue_stopped, netif_wake_queue, netif_stop_queue, netdev_reset_queue and netdev_sent_queue be made by queue. Signed-off-by:
Joao Pinto <jpinto@synopsys.com> Tested-by:
Niklas Cassel <niklas.cassel@axis.com> Signed-off-by:
-
Joao Pinto authored
This patch adds the structure stmmac_tx_queue which contains tx queues specific data (previously in stmmac_priv). Signed-off-by:
-
Joao Pinto authored
This patch adds the structure stmmac_rx_queue which contains rx queues specific data (previously in stmmac_priv). Signed-off-by:
-
Joao Pinto authored
This patch breaks several functions into RX and TX scopes, which will be useful when adding multiple buffers mechanism. Signed-off-by:
-
David S. Miller authored
Tobias Klauser says: ==================== Use net_device_stats from struct net_device Along the lines of previous patches, switch (almost) all remaining net drivers to use net_device_stats from net_device instead of including a copy of it in their netdev_priv struct. ==================== Signed-off-by: -
Tobias Klauser authored
Instead of using a private copy of struct net_device_stats in struct pegasus, use stats from struct net_device. Also remove the now unnecessary .ndo_get_stats function. Cc: Petko Manolov <petkan@nucleusys.com> Cc: linux-usb@vger.kernel.org Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
-
Tobias Klauser authored
Instead of using a private copy of struct net_device_stats in struct kaweth_device, use stats from struct net_device. Also remove the now unnecessary .ndo_get_stats function. Cc: linux-usb@vger.kernel.org Signed-off-by:
-
Tobias Klauser authored
Instead of using a private copy of struct net_device_stats in struct typhoon, use stats from struct net_device. Signed-off-by:
-
Tobias Klauser authored
Instead of using a private copy of struct net_device_stats in struct de_private, use stats from struct net_device. Signed-off-by:
-
Tobias Klauser authored
Instead of using a private copy of struct net_device_stats in struct happy_meal, use stats from struct net_device. Signed-off-by:
-
Tobias Klauser authored
Instead of using a private copy of struct net_device_stats in struct bigmac, use stats from struct net_device. Signed-off-by:
-
Tobias Klauser authored
Instead of using a private copy of struct net_device_stats in struct w90p910_ether, use stats from struct net_device. Also remove the now unnecessary .ndo_get_stats function. Signed-off-by:
-
Tobias Klauser authored
Instead of using a private copy of struct net_device_stats in struct _mace_private, use stats from struct net_device. Signed-off-by:
-
Tobias Klauser authored
Instead of using a private copy of struct net_device_stats in struct moxart_mac_priv_t, use stats from struct net_device. Also remove the now unnecessary .ndo_get_stats function. Signed-off-by:
-
Tobias Klauser authored
Instead of using a private copy of struct net_device_stats in struct macb, use stats from struct net_device. Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Tobias Klauser authored
Instead of using a private copy of struct net_device_stats in struct emac_instance, use stats from struct net_device. Signed-off-by:
-
Tobias Klauser authored
Instead of using a private copy of struct net_device_stats in struct netdev_private, use stats from struct net_device. Also remove the now unnecessary .ndo_get_stats function and the #ifdef'ed increment of the collisions16 counter which doesn't exist in struct net_device_stats. Signed-off-by:
-
Tobias Klauser authored
Instead of using a private copy of struct net_device_stats in struct port_info, use stats from struct net_device. Cc: Santosh Raspatur <santosh@chelsio.com> Signed-off-by:
-
Tobias Klauser authored
Instead of using a private copy of struct net_device_stats in struct port_info, use stats from struct net_device. Signed-off-by:
-
David S. Miller authored
Yuval Mintz says: ==================== qede: support XDP head adjustments Daniel has brought to my attention the fact that qede is the only driver that currently supports XDP but still fails any program where xdp_adjust_head is set on the bpf_prog. This series is meant to remedy this and align qede with the rest of the driver, making it possible to remove said field. Patch #1 contains a minor cache-saving optimization for latter patches. Patches #2 & #3 address existing issues with the qede implementation [#2 should have been a part of this as it addresses something that's affected by the additional headroom; #3 is simply here for the ride]. Patches #4 & #5 add the necessary logic in driver for ingress headroom, the first adding the infrastrucutre needed for supporting the headroon [as currently qede doesn't support such], and the second removing the existing XDP limitation. ==================== Signed-off-by: -
Mintz, Yuval authored
In case an XDP program is attached, reserve XDP_PACKET_HEADROOM bytes at the beginning of the packet for the program to play with. Modify the XDP logic in the driver to fill-in the missing bits and re-calculate offsets and length after the program has finished running to properly reflect the current status of the packet. We can then go and remove the limitation of not supporting XDP programs where xdp_adjust_head is set. Signed-off-by:
Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by:
-
Mintz, Yuval authored
Driver currently doesn't support any headroom; The only 'available' space it has in the head of the buffer is due to the placement offset. In order to allow [later] support of XDP adjustment of headroom, modify the the ingress flow to properly handle a scenario where the packets would have such. Signed-off-by:
-
Mintz, Yuval authored
Current implementation of VFs is very tight in regard to queue resources. VFs support for XDP would require quite a bit of additional infrastructure in qede and qed [sharing of queue-zones between queues, more VF cids, mapping of the doorbell bar, etc.]. For now, prevent XDP programs from being attached to VFs. Signed-off-by:
-
Mintz, Yuval authored
Driver is currently using dma_unmap_single() with the address it passed to device for the purpose of forwarding, but the XDP transmission buffer was originally a page allocated for the rx-queue. The mapped address is likely to differ from the original mapped address due to the placement offset. This difference is going to get even bigger once we support headroom. Cache the original mapped address of the page, and use it for unmapping of the buffer when completion arrives for the XDP forwarded packet. Signed-off-by:
-
Mintz, Yuval authored
Currently, each time an ingress packet is passed to networking stack the driver increments a per-queue SW statistic. As we want to have additional fields in the first cache-line of the Rx-queue struct, change flow so this statistic would be updated once per NAPI run. We will later push the statistic to a different cache line. Signed-off-by:
-
David S. Miller authored
Ursula Braun says: ==================== s390 patches for net-next here are some cleanup patches for drivers/s390/net. V2: respin, now patch "s390/qeth: improve endianness handling" is supposed to apply cleanly to net-next ==================== Signed-off-by: -
Hans Wippel authored
Replace ntohs with endianness conversion for the SKB protocol assignment to avoid an endianness warning reported by sparse. No functional change. Signed-off-by:
Hans Wippel <hwippel@linux.vnet.ibm.com> Signed-off-by:
Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by:
-
Hans Wippel authored
Use endianness conversions for SKB protocol assignments and usage to avoid endianness warnings reported by sparse. No functional changes. Signed-off-by:
-
Hans Wippel authored
Avoid endianness warnings reported by sparse by (1) using endianness conversions for assigning and using network packet fields, and (2) removing unnecessary endianness conversions from qeth_l3_rebuild_skb. No functional changes. Signed-off-by:
-
Julian Wiedmann authored
1. options.add_hhlen is set but never used, drop it 2. clean up no longer required forward declarations 3. delete all sorts of unused defines Signed-off-by:
Julian Wiedmann <jwi@linux.vnet.ibm.com> Reviewed-by:
Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
qeth_qdio_output_handler() is the only caller of qeth_handle_send_error() and doesn't care about the return value. Signed-off-by:
-
Julian Wiedmann authored
The ac fields are bitmaps, so format them as hex. While at it, also print the ac2 field. Signed-off-by:
-
Julian Wiedmann authored
better use the constant definitions. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2017-04-06 This series contains updates to i40e and i40evf. Preethi adds support for the outer checksum and TSO offloads for encapsulated packets for the VF. Mitch fixes a possible memory leak, where we need to remove the client instance when the driver unloads. Also we need to check to see if the client (i40iw) is already present during probe, and add a client instance if necessary. Lastly, make sure we close any attached clients when the driver is removed or shut down to prevent a kernel panic. ==================== Signed-off-by: -
Mitch Williams authored
When the driver is removed or shut down, close any attached clients (i.e. i40iw). This prevents a panic seen sometimes on forced driver removal or system shutdown when iWarp is running. Change-ID: I4f6161e5a73ffbb2fd5883567b007310302bfcb5 Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Mitch Williams authored
In some cases, a client (i40iw) may already be present when probe is called. Check for this, and add a client instance if necessary. Change-ID: I2009312694b7ad81f1023919e4c6c86181f21689 Signed-off-by:
-
Mitch Williams authored
When the driver is unloaded, we need to remove the client instance, otherwise we leak memory. Change-ID: If1e7882ac1f6ce15d004722fafbe31afbe0adc9a Signed-off-by:
-
