There was a missing return in do_signal() that caused the saved
sigmask to be written back after having successfully delivered
the signal.
Signed-off-by: Ryusuke Sakato <sakato@hsdv.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This takes care of tearing down the UBC so it's not inadvertently
left configured at the next context switch time. Failure to do
this results in spurious SIGTRAPs in certain debug sequences.
Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6:
  ide: make legacy IDE VLB modules check for the "probe" kernel params (v2)
  ide: remove some obsoleted kernel params (v2)
  ide/pci/delkin_cb.c: pci_module_init to pci_register_driver
  scc_pata: bugfix for checking DMA IRQ status
  ide: remove a ton of pointless #undef REALLY_SLOW_IO
  siimage: DRAC4 note
  adjust legacy IDE resource setting (v2)
  ide: fix pmac breakage
  ide-cs: Update device table
  ide: ide_get_best_pio_mode() returns incorrect IORDY setting (take 2)
  piix/slc90e66: more tuneproc() fixing (take 2)
  ide: fix drive side 80c cable check, take 2
  cmd64x: fix PIO mode setup (take 3)
  alim15x3: fix PIO mode setup

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [libata] pata_jmicron: build fix

* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb:
  V4L/DVB (5260): Cx88-blackbird: allow usage of both 376836 and 262144 sized firmware images
  V4L/DVB (5366): Pvrusb2: Fix compilation warning for amd64 builds (use %zu instead of %u)

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [VLAN]: Avoid a 4-order allocation.
  [HDLC] Fix dev->header_cache_update having a random value.
  [NetLabel]: Verify sensitivity level has a valid CIPSO mapping
  [PPPOE]: Key connections properly on local device.
  [AF_UNIX]: Test against sk_max_ack_backlog properly.
  [NET]: Fix bugs in "Whether sock accept queue is full" checking

* master.kernel.org:/home/rmk/linux-2.6-arm: (30 commits)
  [ARM] Acorn: move the i2c bus driver into drivers/i2c
  [ARM] ARM SCSI: Don't try to dma_map_sg too many scatterlist entries
  [ARM] ARM FAS216: don't modify scsi_cmnd request_bufflen
  [ARM] rtc-pcf8583: Final fixes for this RTC on RiscPC
  [ARM] rtc-pcf8583: correct month and year offsets
  [ARM] rtc-pcf8583: don't use BCD_TO_BIN/BIN_TO_BCD
  [ARM] EBSA110: Work around build errors
  [ARM] 4241/1: Define mb() as compiler barrier on a uniprocessor system
  [ARM] 4239/1: S3C24XX: Update kconfig entries for PM
  [ARM] 4238/1: S3C24XX: docs: update suspend and resume
  [ARM] 4237/2: oprofile: Always allow backtraces on ARM
  [ARM] Yet more asm/apm-emulation.h stuff
  ARM: OMAP: Add missing get_irqnr_preamble and arch_ret_to_user for omap2
  ARM: OMAP: Use linux/delay.h not asm/delay.h
  ARM: OMAP: Remove obsolete alsa typedefs
  ARM: OMAP: omap1510->15xx conversions needed for sx1
  ARM: OMAP: Add missing includes to board-nokia770
  ARM: OMAP: Workqueue changes for board-h4.c
  ARM: OMAP: dmtimer.c omap1 register fix
  ARM: OMAP: board-nokia770: correct lcd name
  ...

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] MTX1: clear PCI errors
  [MIPS] MTX1: add idsel cardbus ressources
  [MIPS] MTX1: remove unneeded settings
  [MIPS] dma_sync_sg_for_cpu is a no-op except for non-coherent R10000s.
  [MIPS] Cobalt: update reserved resources
  [MIPS] SN: PCI fixup needs to include <irq.h>.
  [MIPS] DMA: Fix a bunch of warnings due to missing inline keywords.
  [MIPS] RM: It should be #ifdef CONFIG_FOO not #if CONFIG_FOO ...
  [MIPS] Fix and cleanup the mess that a dozen prom_printf variants are.
  [MIPS] DEC: Remove redeclarations of mips_machgroup and mips_machtype.
  [MIPS] No need to write c0_compare in plat_timer_setup
  [MIPS] Convert to RTC-class ds1742 driver
  [MIPS] Oprofile: Add missing break statements.
  [MIPS] jmr3927: build fix
  [MIPS] SNI: Fix mc146818_decode_year
  [MIPS] Replace sys32_timer_create with the generic compat_sys_timer_create.
  [MIPS] Replace sys32_socketcall with the generic compat_sys_socketcall.
  [MIPS] N32 waitid is the same as o32.

Move the Acorn IOC/IOMD I2C bus driver from drivers/i2c, strip
out the reminants of the platform specific parts of the old
PCF8583 RTC code, and remove the old obsolete PCF8583 driver.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

An off-by-one bug meant we were always trying to map one too many
scatterlist entries.  This was mostly harmless prior to the checks
going in to consistent_sync(), but now causes the kernel to BUG.

Also, powertec.c was missing an assignment to info->ec.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

SCSI doesn't want drivers to modify request_bufflen, so keep a
driver-private copy of this in the scsi_pointer structure instead.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Replace the I2C bus address, as per drivers/acorn/char/pcf8583.c.

Also, since this driver also contains Acorn RiscPC specific code
for obtaining the current year from the SRAM (and updating the
platform specific checksum when writing new data back) this is
NOT a platform independent driver.

Document it as such, and update the dependencies to reflect this
fact.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

No, today is not 4th April 3907, it's 4th March 2007.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Both BCD_TO_BIN(x) and BIN_TO_BCD(x) have an unexpected side-effect -
not only do they return the value as expected, they _modify_ their
argument in the process.

Let's play it safe and avoid these macros.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

This patch clears PCI errors after showing more debug informations.
Signed-off-by: Florian Fainelli <florian.fainelli@int-evry.fr>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Adds cardbus ressources for MTX1 boards which have a PCMCIA controller.
Signed-off-by: Florian Fainelli <florian.fainelli@int-evry.fr>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This patch removes unnecessary settings at setup time.
Signed-off-by: Florian Fainelli <florian.fainelli@int-evry.fr>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This patch has removed unused timer resource.
Moreover, the name of reserved resources ware changed.
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

early_printk is a so much saner thing.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

If R4k counter was used for hpt_timer and interrupt source,
c0_hpt_timer_init() initializes the c0_compare register.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The generic rtc-ds1742 driver can be used for RBTX4927 and JMR3927
(with __swizzle_addr trick).  This patch also removes MIPS local
DS1742 stuff.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This was causing oprofile to fail on R10000, R12000, R14000.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Big endian RMs uses a different mc146818_decode_year than little endian RMs
Correct mc146818_decode_year for years before 2000
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Use the standard magic.h for kvmfs.

Cc: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Avi Kivity <avi@qumranet.com>

A bogus 'return r' can cause an otherwise successful module load to fail.
This both denies users the use of kvm, and it also denies them the use of
their machine, as it leaves a filesystem registered with its callbacks
pointing into now-freed module memory.

Fix by returning a zero like a good module.

Thanks to Richard Lucassen <mailinglists@lucassen.org> (?) for reporting
the problem and for providing access to a machine which exhibited it.
Signed-off-by: Avi Kivity <avi@qumranet.com>

Enabling dirty page logging is done using KVM_SET_MEMORY_REGION ioctl.
If the memory region already exists, we need to remove write accesses,
so writes will be caught, and dirty pages will be logged.
Signed-off-by: Uri Lublin <uril@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

To be called from kvm_vm_ioctl_set_memory_region()
Signed-off-by: Uri Lublin <uril@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

Since dirty_bitmap is an unsigned long array, the alignment and size need
to take that into account.
Signed-off-by: Uri Lublin <uril@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

A few places where we modify guest memory fail to call mark_page_dirty(),
causing live migration to fail.  This adds the missing calls.
Signed-off-by: Uri Lublin <uril@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

Signed-off-by: Avi Kivity <avi@qumranet.com>

Allocate a distinct inode for every vcpu in a VM.  This has the following
benefits:

 - the filp cachelines are no longer bounced when f_count is incremented on
   every ioctl()
 - the API and internal code are distinctly clearer; for example, on the
   KVM_GET_REGS ioctl, there is no need to copy the vcpu number from
   userspace and then copy the registers back; the vcpu identity is derived
   from the fd used to make the call

Right now the performance benefits are completely theoretical since (a) we
don't support more than one vcpu per VM and (b) virtualization hardware
inefficiencies completely everwhelm any cacheline bouncing effects.  But
both of these will change, and we need to prepare the API today.
Signed-off-by: Avi Kivity <avi@qumranet.com>