- 22 Jul, 2016 1 commit
-
-
Dave Airlie authored
Merge branch 'drm-rockchip-next-fixes-2016-07-19' of https://github.com/markyzq/kernel-drm-rockchip into drm-next Here are some little fixes for rockchip drm, looks good for me, and there is no doubt on them, So I'd like you can land them. * 'drm-rockchip-next-fixes-2016-07-19' of https://github.com/markyzq/kernel-drm-rockchip: drm/rockchip: allocate correct crtc state structure on reset drm/rockchip: Delete an unnecessary check before drm_gem_object_unreference_unlocked() drm/rockchip: fix a couple off by one bugs drm/rockchip: vop: correct rk3036 register define drm/rockchip: vop: correct the source size of uv scale factor setting drm/rockchip: vop: add uv_vir register field for RK3036 VOP drm/rockchip: fix "should it be static?" warnings drm/rockchip: fb: add missing header drm/rockchip: dw_hdmi: remove unused #include
-
- 19 Jul, 2016 10 commits
-
-
https://github.com/boddob/linuxDave Airlie authored
This is an update to the previous drm bridge pull request. The ADV7511 driver's conversion from slave encoder to bridge meant that its users (the rcar-du kms driver) should use the bridge interface too. This pull request now also contains a commit that updates the rcar-du's hdmi encoder interface from slave encoder to bridge. The other updates are as before: - Converts the ADV7511 i2c slave encoder driver to a bridge driver. Adds support for the ADV7533 bridge chip. - Add bridge driver for TC358767 (DSI/DPI to eDP) encoder chips. * 'drm_bridge_for_4.8' of https://github.com/boddob/linux: drm: rcar-du: Remove i2c slave encoder interface for hdmi encoder drm/bridge: tc358767: Add DPI to eDP bridge driver dt-bindings: tc358767: add DT documentation dt-bindings: drm/bridge: Update bindings for ADV7533 drm/bridge: adv7533: Change number of DSI lanes dynamically drm/bridge: adv7533: Use internal timing generator drm/bridge: adv7533: Create a MIPI DSI device drm/bridge: adv7533: Initial support for ADV7533 drm/bridge: adv7511: Fix mutex deadlock when interrupts are disabled drm/i2c: adv7511: Move to bridge folder drm/i2c: adv7511: Convert to drm_bridge
-
John Keeping authored
Because we are using a custom crtc_state structure, we must override the reset helper to allocate the correct amount of memory. Cc: stable@vger.kernel.org Fixes: 4e257d9e ("drm/rockchip: get rid of rockchip_drm_crtc_mode_config") Signed-off-by:
John Keeping <john@metanate.com> Signed-off-by:
Mark Yao <mark.yao@rock-chips.com> Reviewed-by:
Sean Paul <seanpaul@chromium.org>
-
Markus Elfring authored
The drm_gem_object_unreference_unlocked() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by:Markus Elfring <elfring@users.sourceforge.net>
-
Dan Carpenter authored
The priv->crtc_funcs[] array has ROCKCHIP_MAX_CRTC elements so > should be >= here. Fixes: 2048e328 ('drm: rockchip: Add basic drm driver') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Mark Yao authored
Signed-off-by:
Tomasz Figa <tfiga@chromium.org>
-
Mark Yao authored
When the input color format is YUV, we need to do some external scale for CBCR. Like, * In YUV420 data format: cbcr_xscale = dst_w / src_w * 2; cbcr_yscale = dst_h / src_h * 2; * In YUV422 data format: cbcr_xscale = dst_w / src_w * 2; cbcr_yscale = dst_h / src_h; * In YUV444 data format cbcr_xscale = dst_w / src_w; cbcr_yscale = dst_h / src_h; Signed-off-by:Yakir Yang <ykk@rock-chips.com>
-
Yakir Yang authored
The WIN0 of RK3036 VOP could support YUV data format, but driver forget to add the uv_vir register field for it. Signed-off-by: -
John Keeping authored
Combined with the previous commit, this fixes all of the sparse warnings in drm/rockchip. Signed-off-by: -
John Keeping authored
This fixes the following sparse warnings: drivers/gpu/drm/rockchip/rockchip_drm_fb.c:32:23: warning: symbol 'rockchip_fb_get_gem_obj' was not declared. Should it be static? drivers/gpu/drm/rockchip/rockchip_drm_fb.c:315:24: warning: symbol 'rockchip_drm_framebuffer_init' was not declared. Should it be static? drivers/gpu/drm/rockchip/rockchip_drm_fb.c:329:6: warning: symbol 'rockchip_drm_mode_config_init' was not declared. Should it be static? Signed-off-by: -
John Keeping authored
drm_encoder_slave is not used in this file. Signed-off-by:
-
- 18 Jul, 2016 2 commits
-
-
git://people.freedesktop.org/~robclark/linuxDave Airlie authored
This time, a bunch of cleanups and refactoring work so that we can get dt bindings upstream. In general, we keep compatibility with existing downstream bindings as much as possible, to make backports to device kernels easier, but now we have cleaner upstream bindings so that we can start landing gpu/display support in upstream dts files. Plus shrinker and madvise support, which has been on my todo list for a long time. And support for arbitrary # of cmd bufs in submit ioctl (I've got libdrm+mesa userspace for this on branches) to enable some of the mesa batch/reorder stuff I'm working on. Userspace decides whether this is supported based on advertised driver version. For the interesting userspace bits, see: https://github.com/freedreno/libdrm/commit/1baf03ac6e77049d9c8be1e3d5164283ce82c9db Plus support for ASoC hdmi audio codec, and few other random other cleanups. * 'msm-next' of git://people.freedesktop.org/~robclark/linux: (52 commits) drm/msm: Delete an unnecessary check before drm_gem_object_unreference() drm/msm: Delete unnecessary checks before drm_gem_object_unreference_unlocked() drm/msm/hdmi: Delete an unnecessary check before the function call "kfree" drm/msm: return -EFAULT instead of bytes remaining drm/msm/hdmi: use PTR_ERR_OR_ZERO() to simplify the code drm/msm: add missing of_node_put after calling of_parse_phandle drm/msm: Replace drm_fb_get_bpp_depth() with drm_format_plane_cpp() drm/msm/dsi: Fix return value check in msm_dsi_host_set_display_mode() drm: msm: Add ASoC generic hdmi audio codec support. drm/msm/rd: add module param to dump all bo's drm/msm/rd: split out snapshot_buf helper drm/msm: bump kernel api version drm/msm: deal with arbitrary # of cmd buffers drm/msm: wire up vmap shrinker drm/msm: change gem->vmap() to get/put drm/msm: shrinker support drm/msm: add put_iova() helper drm/msm: add madvise ioctl drm/msm: use mutex_lock_interruptible for submit ioctl dt-bindings: msm/mdp: Provide details on MDP interface ports ...
-
Archit Taneja authored
The hdmi output in rcar-du uses the i2c slave encoder interface to link to the adv7511 encoder chip. The kms driver creates encoder and connector entities that internally uses the drm_encoder_slave_funcs ops provided by the slave encoder driver. Change the driver such that it expects a bridge entity instead of a slave encoder. The hdmi connector code isn't needed anymore as we expect the adv7511 bridge driver to create/manage the connector. Note that the kms driver still expects a connector node for hdmi to be present in DT. This node has no connection to the connector created by the bridge driver. Tested-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Archit Taneja <architt@codeaurora.org>
-
- 17 Jul, 2016 2 commits
-
-
Andrey Gusakov authored
Add a drm_bridge driver for the Toshiba TC358767 DPI/DSI to eDP/DP bridge. Currently only DPI input with 24-bit RGB is supported. Signed-off-by:
Andrey Gusakov <andrey.gusakov@cogentembedded.com> Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Philipp Zabel authored
Add DT binding documentation for the Toshiba TC358767 eDP bridge. Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 16 Jul, 2016 25 commits
-
-
Markus Elfring authored
The drm_gem_object_unreference() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by:
Rob Clark <robdclark@gmail.com>
-
Markus Elfring authored
The drm_gem_object_unreference_unlocked() function tests whether its argument is NULL and then returns immediately. Thus the test around the calls is not needed. This issue was detected by using the Coccinelle software. Signed-off-by:
-
Markus Elfring authored
The kfree() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by:
-
Dan Carpenter authored
copy_to/from_user returns the number of bytes remaining to be copied but we want to return -EFAULT. Signed-off-by:
-
Wei Yongjun authored
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR. Generated by: scripts/coccinelle/api/ptr_ret.cocci Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Peter Chen authored
of_node_put needs to be called when the device node which is got from of_parse_phandle has finished using. Signed-off-by:
Peter Chen <peter.chen@nxp.com> [rebased on top of Archit's DT rework, so looses one hunk] Signed-off-by:
-
Laurent Pinchart authored
The driver needs the number of bytes per pixel, not the bpp and depth info meant for fbdev compatibility. Use the right API. Signed-off-by:
-
Wei Yongjun authored
In case of error, the function drm_mode_duplicate() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by:
-
Srinivas Kandagatla authored
This patch adds support to generic audio codec via ASoC hdmi-codec infrastucture which is merged recently. Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> [rebased on efc9194b] Signed-off-by:
-
Rob Clark authored
By default, if using $debugfs/.../rd to log cmdstream, only the cmdstream buffers themselves are logged. But in some cases we want to capture other buffers in the submit (to see VBO's or shaders). So add a mod-param knob to control this. Signed-off-by: -
Rob Clark authored
(reduce the noise in next patch) Signed-off-by: -
Rob Clark authored
Signed-off-by: -
Rob Clark authored
For some optimizations coming on the userspace side, splitting larger draw or gmem cmds into multiple cmdstream buffers, we need to support much more than the previous small/arbitrary limit. Signed-off-by: -
Rob Clark authored
Signed-off-by: -
Rob Clark authored
Before we can add vmap shrinking, we really need to know which vmap'ings are currently being used. So switch to get/put interface. Stubbed put fxns for now. Signed-off-by: -
Rob Clark authored
For a first step, only purge obj->madv==DONTNEED objects. We could be more agressive and next try unpinning inactive objects.. but that is only useful if you have swap. Signed-off-by: -
Rob Clark authored
We'll need this too for shrinker/purging. Signed-off-by: -
Rob Clark authored
Doesn't do anything too interesting until we wire up shrinker. Pretty much lifted from i915. Signed-off-by: -
Rob Clark authored
Be kinder to things that do lots of signal handling (ie. Xorg) Signed-off-by: -
Archit Taneja authored
The MDP4/5 DT node now contains a list of ports that describe how it connects to external encoder interfaces like DSI and HDMI. These follow the standard of_graph bindings, and allow us to get rid of the 'connectors' phandle that contained a list of all the external encoders connected to MDP. Acked-by:
-
Archit Taneja authored
Add a new doc for DT bindings for platforms that contain MDP5 display controller hardware. The doc describes bindings for the top level MDSS wrapper hardware and MDP5 itself. Add an example for the bindings as found in MSM8916. Acked-by:
-
Archit Taneja authored
MDP4 and MDP5 vary a bit in terms of device hierarchy and the properties they require. Rename the binding doc to mdp4.txt and remove MDP5 specific pieces. A separate document will be created for MDP5 Acked-by:
-
Archit Taneja authored
The DSI host and PHY driver currently expects the DT bindings to provide custom properties "qcom,dsi-host-index" and "qcom,dsi-phy-index" so that the driver can identify which DSI instance it is. The binding isn't acceptable, but the driver still needs to figure out what its instance id. This is now done by storing the mmio starting addresses for each DSI instance in every SoC version in the driver. The driver then identifies the index number by trying to match the stored address with comparing the resource start address we get from DT. We don't have compatible strings for DSI PHY on each SoC, but only the DSI PHY type. We only support one SoC version for each PHY type, so we get away doing the same thing above for the PHY driver. We can revisit this when we support two SoCs with the same DSI PHY. Signed-off-by:
-
Archit Taneja authored
Introduce new compatible strings for the top level MDSS wrapper device, and the MDP5 device. Previously, the "qcom,mdp5" and "qcom,mdss_mdp" compatible strings were used to match the top level platform_device (which was also tied to the top level drm_device struct). Now, these strings are used to match the MDP5 platform device. Use "qcom,mdss" as the compatible string for top level MDSS device. This is now used to match the top level platform_device (which is tied to the drm_device struct). Signed-off-by:
-
Archit Taneja authored
The driver currently identifies the GPU components it needs by parsing a phandle list from the 'gpus' DT property. This isn't the right binding to go with. So, for now, just search all device nodes and find the gpu node we need by parsing a list of compatible strings. Once we know how to link the kms and gpu drivers, we'll drop this method and use the correct binding. Signed-off-by:
-
