Skip to content

L
linux
Switch branch/tag
  1. 02 Oct, 2017 1 commit
  3. 29 Sep, 2017 5 commits
  5. 28 Sep, 2017 21 commits
  7. 27 Sep, 2017 12 commits
    • Tyler Baicar's avatar
      ACPI / APEI: clear error status before acknowledging the error · aaf2c2fb
      Tyler Baicar authored 
      Currently we acknowledge errors before clearing the error status.
This could cause a new error to be populated by firmware in-between
the error acknowledgment and the error status clearing which would
cause the second error's status to be cleared without being handled.
So, clear the error status before acknowledging the errors.

Also, make sure to acknowledge the error if the error status read
fails.
Signed-off-by: default avatarTyler Baicar <tbaicar@codeaurora.org>
Reviewed-by: default avatarBorislav Petkov <bp@suse.de>
Signed-off-by: default avatarRafael J. Wysocki <rafael.j.wysocki@intel.com>
      aaf2c2fb
    • Linus Torvalds's avatar
      Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs · 9cd6681c
      Linus Torvalds authored 
      Pull quota and isofs fixes from Jan Kara:
 "Two quota fixes (fallout of the quota locking changes) and an isofs
  build fix"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  quota: Fix quota corruption with generic/232 test
  isofs: fix build regression
  quota: add missing lock into __dquot_transfer()
      9cd6681c
    • Linus Torvalds's avatar
      Merge tag 'linux-kselftest-4.14-rc3-fixes' of... · 225d3b67
      Linus Torvalds authored 
      Merge tag 'linux-kselftest-4.14-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:
 "This update consists of:

   - fixes to several existing tests

   - a test for regression introduced by b9470c27 ("inet: kill
     smallest_size and smallest_port")

   - seccomp support for glibc 2.26 siginfo_t.h

   - fixes to kselftest framework and tests to run make O=dir use-case

   - fixes to silence unnecessary test output to de-clutter test results"

* tag 'linux-kselftest-4.14-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (28 commits)
  selftests: timers: set-timer-lat: Fix hang when testing unsupported alarms
  selftests: timers: set-timer-lat: fix hang when std out/err are redirected
  selftests/memfd: correct run_tests.sh permission
  selftests/seccomp: Support glibc 2.26 siginfo_t.h
  selftests: futex: Makefile: fix for loops in targets to run silently
  selftests: Makefile: fix for loops in targets to run silently
  selftests: mqueue: Use full path to run tests from Makefile
  selftests: futex: copy sub-dir test scripts for make O=dir run
  selftests: lib.mk: copy test scripts and test files for make O=dir run
  selftests: sync: kselftest and kselftest-clean fail for make O=dir case
  selftests: sync: use TEST_CUSTOM_PROGS instead of TEST_PROGS
  selftests: lib.mk: add TEST_CUSTOM_PROGS to allow custom test run/install
  selftests: watchdog: fix to use TEST_GEN_PROGS and remove clean
  selftests: lib.mk: fix test executable status check to use full path
  selftests: Makefile: clear LDFLAGS for make O=dir use-case
  selftests: lib.mk: kselftest and kselftest-clean fail for make O=dir case
  Makefile: kselftest and kselftest-clean fail for make O=dir case
  selftests/net: msg_zerocopy enable build with older kernel headers
  selftests: actually run the various net selftests
  selftest: add a reuseaddr test
  ...
      225d3b67
    • Linus Torvalds's avatar
      Merge branch 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 7031b641
      Linus Torvalds authored 
      Pull x86 fpu fixes and cleanups from Ingo Molnar:
 "This is _way_ more cleanups than fixes, but the bugs were subtle and
  hard to hit, and the primary reason for them existing was the
  unnecessary historical complexity of some of the x86/fpu interfaces.

  The first bunch of commits clean up and simplify the xstate user copy
  handling functions, in reaction to the collective head-scratching
  about the xstate user-copy handling code that leads up to the fix for
  this SkyLake xstate handling bug:

     0852b374: x86/fpu: Add FPU state copying quirk to handle XRSTOR failure on Intel Skylake CPUs

  The cleanups don't change any functionality, they just (hopefully)
  make it all clearer, more consistent, more debuggable and more robust.

  Note that most of the linecount increase comes from these commits,
  where we better split the user/kernel copy logic by having more
  variants, instead repeated fragile patterns of:

               if (kbuf) {
                       memcpy(kbuf + pos, data, copy);
               } else {
                       if (__copy_to_user(ubuf + pos, data, copy))
                               return -EFAULT;
               }

  The next bunch of commits simplify the FPU state-machine to get rid of
  old lazy-FPU idiosyncrasies - a defensive simplification to make all
  the code easier to review and fix. No change in functionality.

  Then there's a couple of additional debugging tweaks: static checker
  warning fix and move an FPU related warning to under WARN_ON_FPU(),
  followed by another bunch of commits that represent a finegrained
  split-up of the fixes from Eric Biggers to handle weird xstate bits
  properly.

  I did this finegrained split-up because some of these fixes also
  impact the ABI for weird xstate handling, for which we'd like to have
  good bisection results, should they cause any problems. (We also had
  one regression with the more monolithic fixes, so splitting it all up
  sounded prudent for robustness reasons as well.)

  About the whole series: the commits up to 03eaec81 have been in
  -next for months - but I've recently rebased them to remove a state
  machine clean-up commit that was objected to, and to make it more
  bisectable - so technically it's a new, rebased tree.

  Robustness history: this series had some regressions along the way,
  and all reported regressions have been fixed. All but one of the
  regressions manifested itself as easy to report warnings. The previous
  version of this latest series was also in linux-next, with one
  (warning-only) regression reported which is fixed in the latest
  version.

  Barring last minute brown paper bag bugs (and the commits are now
  older by a day which I'd hope helps paperbag reduction), I'm
  reasonably confident about its general robustness.

  Famous last words ..."

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
  x86/fpu: Use using_compacted_format() instead of open coded X86_FEATURE_XSAVES
  x86/fpu: Use validate_xstate_header() to validate the xstate_header in copy_user_to_xstate()
  x86/fpu: Eliminate the 'xfeatures' local variable in copy_user_to_xstate()
  x86/fpu: Copy the full header in copy_user_to_xstate()
  x86/fpu: Use validate_xstate_header() to validate the xstate_header in copy_kernel_to_xstate()
  x86/fpu: Eliminate the 'xfeatures' local variable in copy_kernel_to_xstate()
  x86/fpu: Copy the full state_header in copy_kernel_to_xstate()
  x86/fpu: Use validate_xstate_header() to validate the xstate_header in __fpu__restore_sig()
  x86/fpu: Use validate_xstate_header() to validate the xstate_header in xstateregs_set()
  x86/fpu: Introduce validate_xstate_header()
  x86/fpu: Rename fpu__activate_fpstate_read/write() to fpu__prepare_[read|write]()
  x86/fpu: Rename fpu__activate_curr() to fpu__initialize()
  x86/fpu: Simplify and speed up fpu__copy()
  x86/fpu: Fix stale comments about lazy FPU logic
  x86/fpu: Rename fpu::fpstate_active to fpu::initialized
  x86/fpu: Remove fpu__current_fpstate_write_begin/end()
  x86/fpu: Fix fpu__activate_fpstate_read() and update comments
  x86/fpu: Reinitialize FPU registers if restoring FPU state fails
  x86/fpu: Don't let userspace set bogus xcomp_bv
  x86/fpu: Turn WARN_ON() in context switch into WARN_ON_FPU()
  ...
      7031b641
    • Harish Chegondi's avatar
      IB/hfi1: Unsuccessful PCIe caps tuning should not fail driver load · 828bcbdc
      Harish Chegondi authored 
      Failure to tune PCIe capabilities should not fail driver load. This can
cause the driver load to fail on systems with any of the following:
1. HFI's parent is not root. Example: HFI card is behind a PCIe bridge.
2. HFI's parent is not PCI Express capable.
In these situations, failure to tune PCIe capabilities should be logged
in the system message logs but not cause the driver load to fail.

This patch also ensures pcie capability word DevCtl is written only
after a successful read and the capability tuning process continues
even if read/write of the pcie capability word DevCtl fails.

Fixes: c53df62c ("IB/hfi1: Check return values from PCI config API calls")
Fixes: bf70a775 ("staging/rdma/hfi1: Enable WFR PCIe extended tags from the driver")
Reviewed-by: default avatarMichael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: default avatarMike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: default avatarJakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: default avatarHarish Chegondi <harish.chegondi@intel.com>
Signed-off-by: default avatarDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
      828bcbdc
    • Michael J. Ruhl's avatar
      IB/hfi1: On error, fix use after free during user context setup · b8f42738
      Michael J. Ruhl authored 
      During base context setup, if setup_base_ctxt() fails, the context is
deallocated. This is incorrect because the context is referenced on
return, to notify any waiting subcontext.  If there are no subcontexts
the pointer will be invalid.

Reorganize the error path so that deallocate_ctxt() is called after all
the possible subcontexts have been notified.
Reviewed-by: default avatarIra Weiny <ira.weiny@intel.com>
Signed-off-by: default avatarMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: default avatarDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
      b8f42738
    • Alex Estrin's avatar
      Revert "IB/ipoib: Update broadcast object if PKey value was changed in index 0" · 612601d0
      Alex Estrin authored 
      commit 9a9b8112 will cause core to fail UD QP from being destroyed
on ipoib unload, therefore cause resources leakage.
On pkey change event above patch modifies mgid before calling underlying
driver to detach it from QP. Drivers' detach_mcast() will fail to find
modified mgid it was never given to attach in a first place.
Core qp->usecnt will never go down, so ib_destroy_qp() will fail.

IPoIB driver actually does take care of new broadcast mgid based on new
pkey by destroying an old mcast object in ipoib_mcast_dev_flush())
....
	if (priv->broadcast) {
		rb_erase(&priv->broadcast->rb_node, &priv->multicast_tree);
		list_add_tail(&priv->broadcast->list, &remove_list);
		priv->broadcast = NULL;
	}
...

then in restarted ipoib_macst_join_task() creating a new broadcast mcast
object, sending join request and on completion tells the driver to attach
to reinitialized QP:
...
if (!priv->broadcast) {
...
	broadcast = ipoib_mcast_alloc(dev, 0);
...
	memcpy(broadcast->mcmember.mgid.raw, priv->dev->broadcast + 4,
	       sizeof (union ib_gid));
	priv->broadcast = broadcast;
...

Fixes: 9a9b8112 ("IB/ipoib: Update broadcast object if PKey value was changed in index 0")
Cc: stable@vger.kernel.org
Reviewed-by: default avatarMike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: default avatarDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: default avatarAlex Estrin <alex.estrin@intel.com>
Signed-off-by: default avatarDennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: default avatarFeras Daoud <ferasda@mellanox.com>
Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
      612601d0
    • Kamenee Arumugam's avatar
      IB/hfi1: Return correct value in general interrupt handler · 09592af5
      Kamenee Arumugam authored 
      The general interrupt handler returns IRQ_HANDLED whether an IRQ
was handled or not.
Determine if an IRQ was handled and return the correct value.
Reviewed-by: default avatarDennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: default avatarMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: default avatarKamenee Arumugam <kamenee.arumugam@intel.com>
Signed-off-by: default avatarDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
      09592af5
    • Jan Sokolowski's avatar
      IB/hfi1: Check eeprom config partition validity · 753b19af
      Jan Sokolowski authored 
      Relying on a trailing magic value is incorrect. There are instances where
this is not present as trailing magic value has a specific purpose which is
not partition validation. Instead use the header magic value which is
present in all variants of the platform configuration and is intended for
validation. This is also used in other locations in the driver.

Fixes: bc5214ee (IB/hfi1: Handle missing magic values in config file)
Reviewed-by: default avatarJakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: default avatarJan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: default avatarDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
      753b19af
    • Sebastian Sanchez's avatar
      IB/hfi1: Only reset QSFP after link up and turn off AOC TX · 30e10527
      Sebastian Sanchez authored 
      QSFP reset enables AOC transmitters by default. They should be off
before moving to high power mode to complete the setup. There is no
need to reset the QSFP during LNI failure as it was reset at link down.
Reviewed-by: default avatarMike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: default avatarJakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: default avatarSebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: default avatarDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
      30e10527
    • Sebastian Sanchez's avatar
      IB/hfi1: Turn off AOC TX after offline substates · df5efdd9
      Sebastian Sanchez authored 
      Offline.quietDuration was added in the 8051 firmware, and the driver
only turns off the AOC transmitters when offline.quiet is reached.
However, the AOC transmitters need to be turned off at the new state.
Therefore, turn off the AOC transmitters at any offline substates
including offline.quiet and offline.quietDuration, then recheck we
reached offline.quiet to support backwards compatibility.
Reviewed-by: default avatarJakub Byczkowski <jakub.byczkowski@intel.com>
Reviewed-by: default avatarMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: default avatarSebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: default avatarDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
      df5efdd9
    • Jan Kara's avatar
      quota: Fix quota corruption with generic/232 test · 4c6bb696
      Jan Kara authored 
      Eric has reported that since commit d2faa415 "quota: Do not acquire
dqio_sem for dquot overwrites in v2 format" test generic/232
occasionally fails due to quota information being incorrect. Indeed that
commit was too eager to remove dqio_sem completely from the path that
just overwrites quota structure with updated information. Although that
is innocent on its own, another process that inserts new quota structure
to the same block can perform read-modify-write cycle of that block thus
effectively discarding quota information update if they race in a wrong
way.

Fix the problem by acquiring dqio_sem for reading for overwrites of
quota structure. Note that it *is* possible to completely avoid taking
dqio_sem in the overwrite path however that will require modifying path
inserting / deleting quota structures to avoid RMW cycles of the full
block and for now it is not clear whether it is worth the hassle.

Fixes: d2faa415Reported-and-tested-by: default avatarEric Whitney <enwlinux@gmail.com>
Signed-off-by: default avatarJan Kara <jack@suse.cz>
      4c6bb696
  9. 26 Sep, 2017 1 commit
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7