- 07 Mar, 2018 11 commits
-
-
Gustavo A. R. Silva authored
Assign true or false to boolean variables instead of an integer value. This issue was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 1GbE Intel Wired LAN Driver Updates 2018-03-05 This series contains updates to igb only. Corinna Vinschen adds the support for trusted VFs into the igb driver. Mika fixes an issue where PCIe device is physically unplugged can cause a kernel crash. This issue is that netif_device_detach() is called in these cases, which prevents netif_unregister() from bringing the device down properly. Christophe JAILLET fixes an issue with igb where HWTSTAMP_TX_ON was being handled like a bit mask and not a value. v2: dropped the e1000e fix from the series since I will be pushing it through David Miller's net tree. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Bryan Whitehead says: ==================== lan743x: Add new lan743x driver Add new lan743x driver. The lan743x from Microchip Technologies Inc, is a PCIe to Gigabit Ethernet Controller. Updates for V4: Patch 1/2 - Applied community suggestions convert to using module_pci_driver Updates for V3: Patch 1/2 - Applied community suggestions removed initialization tracking flags. converted to 64 bit statistics. converted tx clean up tasklet to napi. Updates for V2: Patch 1/2 - Applied community suggestions ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bryan Whitehead authored
Update MAINTAINERS to include lan743x driver Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bryan Whitehead authored
Add main source files for new lan743x driver Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Xin Long says: ==================== sctp: add support for some msg_control options from RFC6458 This patchset is to add support for 3 msg_control options described in RFC6458: 5.3.7. SCTP PR-SCTP Information Structure (SCTP_PRINFO) 5.3.9. SCTP Destination IPv4 Address Structure (SCTP_DSTADDRV4) 5.3.10. SCTP Destination IPv6 Address Structure (SCTP_DSTADDRV6) one send flag described in RFC6458: SCTP_SENDALL: This flag, if set, will cause a one-to-many style socket to send the message to all associations that are currently established on this socket. For the one-to- one style socket, this flag has no effect. Note there is another msg_control option: 5.3.8. SCTP AUTH Information Structure (SCTP_AUTHINFO) It's a little complicated, I will post it in another patchset after this. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
This patch is to add support for snd flag SCTP_SENDALL process in sendmsg, as described in section 5.3.4 of RFC6458. With this flag, you can send the same data to all the asocs of this sk once. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
This patch is to add support for Destination IPv4/6 Address options for sendmsg, as described in section 5.3.9/10 of RFC6458. With this option, you can provide more than one destination addrs to sendmsg when creating asoc, like sctp_connectx. It's also a necessary send info for sctp_sendv. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
This patch is to add support for PR-SCTP Information for sendmsg, as described in section 5.3.7 of RFC6458. With this option, you can specify pr_policy and pr_value for user data in sendmsg. It's also a necessary send info for sctp_sendv. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Niklas Söderlund authored
When addressing a review comment in a early version of the offending patch a comment where left in which should have been removed. Remove the comment to keep it consistent with the code. Fixes: 75efa06f ("ravb: add support for changing MTU") Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kirill Tkhai authored
The patch adds SLAB_ACCOUNT to flags of net_cachep cache, which enables accounting of struct net memory to memcg kmem. Since number of net_namespaces may be significant, user want to know, how much there were consumed, and control. Note, that we do not account net_generic to the same memcg, where net was accounted, moreover, we don't do this at all (*). We do not want the situation, when single memcg memory deficit prevents us to register new pernet_operations. (*)Even despite there is !current process accounting already available in linux-next. See kmalloc_memcg() there for the details. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 06 Mar, 2018 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
All of the conflicts were cases of overlapping changes. In net/core/devlink.c, we have to make care that the resouce size_params have become a struct member rather than a pointer to such an object. Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linuxLinus Torvalds authored
Pull ia64 cleanups from Tony Luck: - More atomic cleanup from willy - Fix a python script to work with version 3 - Some other small cleanups * tag 'please-pull-ia64_misc' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: ia64/err-inject: fix spelling mistake: "capapbilities" -> "capabilities" ia64/err-inject: Use get_user_pages_fast() ia64: doc: tweak whitespace for 'console=' parameter ia64: Convert remaining atomic operations ia64: convert unwcheck.py to python3
-
- 05 Mar, 2018 27 commits
-
-
Colin Ian King authored
Trivial fix to spelling mistake in debug message text. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Davidlohr Bueso authored
At the point of sysfs callback, the call to gup is done without mmap_sem (or any lock for that matter). This is racy. As such, use the get_user_pages_fast() alternative and safely avoid taking the lock, if possible. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Sergei Trofimovich authored
CC: Tony Luck <tony.luck@intel.com> CC: Fenghua Yu <fenghua.yu@intel.com> CC: linux-ia64@vger.kernel.org CC: linux-kernel@vger.kernel.org Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Matthew Wilcox authored
While we've only seen inlining problems with atomic_sub_return(), the other atomic operations could have the same problem. Convert all remaining operations to use the same solution as atomic_sub_return(). Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Corentin Labbe authored
Since my system use python3 as default, arch/ia64/scripts/unwcheck.py no longer run. This patch convert it to the python3 syntax. I have ran it with python2/python3 while printing values of start/end/rlen_sum which could be impacted by this change and I see no difference. Fixes: 94a47083 ("scripts: change scripts to use system python instead of env") Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Linus Torvalds authored
Merge tag 'linux-kselftest-4.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "A fix for regression in memory-hotplug install script that prevents the test from running on the target" * tag 'linux-kselftest-4.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: memory-hotplug: fix emit_tests regression
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Use an appropriate TSQ pacing shift in mac80211, from Toke Høiland-Jørgensen. 2) Just like ipv4's ip_route_me_harder(), we have to use skb_to_full_sk in ip6_route_me_harder, from Eric Dumazet. 3) Fix several shutdown races and similar other problems in l2tp, from James Chapman. 4) Handle missing XDP flush properly in tuntap, for real this time. From Jason Wang. 5) Out-of-bounds access in powerpc ebpf tailcalls, from Daniel Borkmann. 6) Fix phy_resume() locking, from Andrew Lunn. 7) IFLA_MTU values are ignored on newlink for some tunnel types, fix from Xin Long. 8) Revert F-RTO middle box workarounds, they only handle one dimension of the problem. From Yuchung Cheng. 9) Fix socket refcounting in RDS, from Ka-Cheong Poon. 10) Don't allow ppp unit registration to an unregistered channel, from Guillaume Nault. 11) Various hv_netvsc fixes from Stephen Hemminger. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (98 commits) hv_netvsc: propagate rx filters to VF hv_netvsc: filter multicast/broadcast hv_netvsc: defer queue selection to VF hv_netvsc: use napi_schedule_irqoff hv_netvsc: fix race in napi poll when rescheduling hv_netvsc: cancel subchannel setup before halting device hv_netvsc: fix error unwind handling if vmbus_open fails hv_netvsc: only wake transmit queue if link is up hv_netvsc: avoid retry on send during shutdown virtio-net: re enable XDP_REDIRECT for mergeable buffer ppp: prevent unregistered channels from connecting to PPP units tc-testing: skbmod: fix match value of ethertype mlxsw: spectrum_switchdev: Check success of FDB add operation net: make skb_gso_*_seglen functions private net: xfrm: use skb_gso_validate_network_len() to check gso sizes net: sched: tbf: handle GSO_BY_FRAGS case in enqueue net: rename skb_gso_validate_mtu -> skb_gso_validate_network_len rds: Incorrect reference counting in TCP socket creation net: ethtool: don't ignore return from driver get_fecparam method vrf: check forwarding on the original netdevice when generating ICMP dest unreachable ...
-
David S. Miller authored
Antoine Tenart says: ==================== net: mvpp2: jumbo frames support This series enable jumbo frames support in the Marvell PPv2 driver. The first 2 patches rework the buffer management, then two patches prepare for the final patch which adds the jumbo frames support into the driver. This is based on top of net-next, and was tested on a mcbin. Thanks! Antoine Since v1: - Improved the Tx FIFO initialization comment. - Improved the pool sanity check in mvpp2_bm_pool_use(). - Fixed pool related comments. - Cosmetic fixes (used BIT() whenever possible). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stefan Chulski authored
This patch adds the support for jumbo frames in the Marvell PPv2 driver. A third buffer pool is added with 10KB buffers, which is used if the MTU is higher than 1518B for packets larger than 1518B. Please note only the port 0 supports hardware checksum offload due to the Tx FIFO size limitation. Signed-off-by: Stefan Chulski <stefanc@marvell.com> [Antoine: cosmetic cleanup, commit message] Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Antoine Tenart authored
This patch adds the NETIF_F_IPV6_CSUM to the driver's features to enable UDP/TCP checksum over IPv6. No extra configuration of the engine is needed on top of the IPv4 counterpart, which already is in the features list (NETIF_F_IP_CSUM). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yan Markman authored
This patch sets the Tx FIFO data size on port 0 to 10kB. This prepares the PPv2 driver for the Jumbo frame support addition as the hardware will need big enough Tx FIFO buffers when dealing with frames going through an interface with an MTU of 9000. Signed-off-by: Yan Markman <ymarkman@marvell.com> [Antoine: commit message, small reworks.] Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stefan Chulski authored
The buffer free routine is updated to release only given a number of buffers, and the destroy routine now checks the actual number of buffers in the (BPPI and BPPE) HW counters before draining the pools. This change helps getting jumbo frames support. Signed-off-by: Stefan Chulski <stefanc@marvell.com> [Antoine: cosmetic cleanup, commit message] Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stefan Chulski authored
This patch configures the buffer manager long pool for all ports part of the same CP. Long pool separation between ports is redundant since there are no performance improvement when different pools are used. Signed-off-by: Stefan Chulski <stefanc@marvell.com> [Antoine: cosmetic cleanup, commit message] Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jonathan Neuschäfer authored
This fixes the following kernel-doc warning: ./include/net/dst.h:366: warning: Function parameter or member 'net' not described in 'skb_tunnel_rx' Fixes: ea23192e ("tunnels: harmonize cleanup done on skb on rx path") Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jonathan Neuschäfer authored
The other dst_cache_{get,set}_ip{4,6} functions, and the doc comment for dst_cache_set_ip6 use 'saddr' for their source address parameter. Rename the parameter to increase consistency. This fixes the following kernel-doc warnings: ./include/net/dst_cache.h:58: warning: Function parameter or member 'addr' not described in 'dst_cache_set_ip6' ./include/net/dst_cache.h:58: warning: Excess function parameter 'saddr' description in 'dst_cache_set_ip6' Fixes: 911362c7 ("net: add dst_cache support") Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jonathan Neuschäfer authored
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christophe JAILLET authored
'HWTSTAMP_TX_ON' should be handled as a value, not as a bit mask. The modified code should behave the same, because HWTSTAMP_TX_ON is 1 and no other possible values of 'tx_type' would match the test. However, this is more future-proof, should other values be allowed one day. See 'struct hwtstamp_config' in 'include/uapi/linux/net_tstamp.h' This fixes a warning reported by smatch: igb_xmit_frame_ring() warn: bit shifter 'HWTSTAMP_TX_ON' used for logical '&' Fixes: 26bd4e2d ("igb: protect TX timestamping from API misuse") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Mika Westerberg authored
When the driver notices that PCIe link is gone by reading 0xffffffff from a register it clears hw->hw_addr and then calls netif_device_detach(). This happens when the PCIe device is physically unplugged for example the user disconnected the Thunderbolt cable. However, netif_device_detach() prevents netif_unregister() from bringing the device down properly including tearing down MSI-X vectors. This triggers following crash during the driver removal: igb 0000:0b:00.0 enp11s0f0: PCIe link lost, device now detached ------------[ cut here ]------------ kernel BUG at drivers/pci/msi.c:352! invalid opcode: 0000 [#1] PREEMPT SMP PTI ... Call Trace: pci_disable_msix+0xc9/0xf0 igb_reset_interrupt_capability+0x58/0x60 [igb] igb_remove+0x90/0x100 [igb] pci_device_remove+0x31/0xa0 device_release_driver_internal+0x152/0x210 pci_stop_bus_device+0x78/0xa0 pci_stop_bus_device+0x38/0xa0 pci_stop_bus_device+0x38/0xa0 pci_stop_bus_device+0x26/0xa0 pci_stop_bus_device+0x38/0xa0 pci_stop_and_remove_bus_device+0x9/0x20 trim_stale_devices+0xee/0x130 ? _raw_spin_unlock_irqrestore+0xf/0x30 trim_stale_devices+0x8f/0x130 ? _raw_spin_unlock_irqrestore+0xf/0x30 trim_stale_devices+0xa1/0x130 ? get_slot_status+0x8b/0xc0 acpiphp_check_bridge.part.7+0xf9/0x140 acpiphp_hotplug_notify+0x170/0x1f0 ... To prevent the crash do not call netif_device_detach() in igb_rd32(). This should be fine because hw->hw_addr is set to NULL preventing future hardware access of the now missing device. Link: https://bugzilla.kernel.org/show_bug.cgi?id=198181Reported-by: Ferenc Boldog <ferenc.boldog@gmail.com> Reported-by: Nikolay Bogoychev <nheart@gmail.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Corinna Vinschen authored
* Add a per-VF value to know if a VF is trusted, by default don't trust VFs. * Implement netdev op to trust VFs (igb_ndo_set_vf_trust) and add trust status to ndo_get_vf_config output. * Allow a trusted VF to change MAC and MAC filters even if MAC has been administratively set. Signed-off-by: Corinna Vinschen <vinschen@redhat.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
David S. Miller authored
Kirill Tkhai says: ==================== Converting pernet_operations (part #4) this series continues to review and to convert pernet_operations to make them possible to be executed in parallel for several net namespaces in the same time. The patches touch mostly netfilter, also there are small number of changes in other places. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kirill Tkhai authored
These pernet_operations register and unregister sysctl. nf_conntrack_l4proto_gre4->init_net is simple memory initializer. Also, exit method removes gre keymap_list, which is per-net. This looks safe to be executed in parallel with other pernet_operations. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kirill Tkhai authored
These pernet_operations register and unregister two conntrack notifiers, and they seem to be safe to be executed in parallel. General/not related to async pernet_operations JFI: ctnetlink_net_exit_batch() actions are grouped in batch, and this could look like there is synchronize_rcu() is forgotten. But there is synchronize_rcu() on module exit patch (in ctnetlink_exit()), so this batch may be reworked as simple .exit method. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kirill Tkhai authored
These pernet_operations register and unregister sysctl and /proc entries. Exit batch method also waits till all per-net conntracks are dead. Thus, they are safe to be marked as async. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kirill Tkhai authored
These pernet_operations initialize and destroy net_generic(net, ip_set_net_id)-related data. Since ip_set is under CONFIG_IP_SET, it's easy to watch drivers, which depend on this config. All of them are in net/netfilter/ipset directory, except of net/netfilter/xt_set.c. There are no more drivers, which use ip_set, and all of the above don't register another pernet_operations. Also, there are is no indirect users, as header file include/linux/netfilter/ipset/ip_set.h does not define indirect users by something like this: #ifdef CONFIG_IP_SET extern func(void); #else static inline func(void); #endif So, there are no more pernet operations, dereferencing net_generic(net, ip_set_net_id). ip_set_net_ops are OK to be executed in parallel for several net, so we mark them as async. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kirill Tkhai authored
These pernet_operations initialize and destroy pernet net_generic(net, fou_net_id) list. The rest of net_generic(net, fou_net_id) accesses may happen after netlink message, and in-tree pernet_operations do not send FOU_GENL_NAME messages. So, these pernet_operations are safe to be marked as async. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kirill Tkhai authored
These pernet_operations looks similar to dccp_v4_ops, and they are also safe to be marked as async. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kirill Tkhai authored
These pernet_operations create and destroy net::dccp::v4_ctl_sk. It looks like another pernet_operations don't want to send dccp packets to dying or creating net. Batch method similar to ipv4/ipv6 sockets and it has to be safe to be executed in parallel with anything else. So, we mark them as async. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-