- 13 Sep, 2019 6 commits
-
-
Mika Kuoppala authored
Daniele noticed new render ranges in Gen11 fw table. Bspec: 18331 Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190913141652.27958-1-mika.kuoppala@linux.intel.com
-
Chris Wilson authored
More pruning away of features until we have a stable system and a basis for debugging what's missing. v2: Fixup vdbox/vebox fusing Signed-off-by:
-
Chris Wilson authored
While srcu may use an integer tag, it does not exclude potential error codes and so may overlap with our own use of -EINTR. Use a separate outparam to store the tag, and report the error code separately. Fixes: 2caffbf1 ("drm/i915: Revoke mmaps and prevent access to fence registers across reset") Signed-off-by:
-
Manasi Navare authored
On ICL+, the max supported plane height is 4320, so bump it up To support 4320, we need to increase the number of bits used to read plane_height to 13 as opposed to older 12 bits. v4: * Adjust the width mask also since extra bits are mbz (Ville) v3: * Use 0xffff for mask as extra bits are mbz (Ville) v2: * ICL plane height supported is 4320 (Ville) * Add a new line between max width and max height (Jose) Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190712203808.4126-1-manasi.d.navare@intel.com
-
Manasi Navare authored
On ICL+, the vertical limits for the transcoders are increased to 8192 and horizontal limits are bumped to 16K so bump up limits in intel_mode_valid() v4: * Increase the hdisplay to 16K (Ville) v3: * Supported starting ICL (Ville) * Use the higher limits from TRANS_VTOTAL register (Ville) v2: * Checkpatch warning (Manasi) Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Chris Wilson authored
As we remove the struct_mutex protection from around the vma pinning, counters need to be atomic and aware that there may be multiple threads simultaneously active. Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190913064200.24297-1-chris@chris-wilson.co.uk
-
- 12 Sep, 2019 13 commits
-
-
Chris Wilson authored
Keep the engine awake to ensure that we don't inject any pm-idle requests. References: https://bugs.freedesktop.org/show_bug.cgi?id=111108Signed-off-by:
-
Arkadiusz Hiler authored
Without it we get: Unclaimed read from register 0x1e1110 WARNING: CPU: 2 PID: 1029 at drivers/gpu/drm/i915/intel_uncore.c:1101 __unclaimed_reg_debug+0x40/0x50 [i915] Call Trace: fwtable_read32+0x233/0x300 [i915] i915_interrupt_info+0xa73/0xd60 [i915] seq_read+0xdb/0x3c0 full_proxy_read+0x51/0x80 vfs_read+0x9e/0x160 ksys_read+0x8f/0xe0 do_syscall_64+0x55/0x1c0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Cc: Chris Wilson <chris@chris-wilson.co.uk> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109824Signed-off-by:
Arkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by:
-
Chris Wilson authored
We see failures where the context continues executing past a preemption event, eventually leading to situations where a request has executed before we have event submitted it to HW! It seems like tgl is ignoring our RING_TAIL updates, but more likely is that there is a missing update required for our semaphore waits around preemption. v2: And disable internal semaphore usage Signed-off-by:
-
Chris Wilson authored
As we track when we put the GT device to sleep upon idling, we can use that callback to sample the current rc6 counters and record the timestamp for estimating samples after that point while asleep. v2: Stick to using ktime_t v3: Track user_wakerefs that interfere with the new intel_gt_pm_wait_for_idle v4: No need for parked/unparked estimation if !CONFIG_PM v5: Keep timer park/unpark logic as was v6: Refactor duplicated estimate/update rc6 logic v7: Pull intel_get_pm_get_if_awake() out from the pmu->lock. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105010Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190912124813.19225-1-chris@chris-wilson.co.uk
-
Jani Nikula authored
Replace device info number of pipes with a bit mask of available pipes. This will prove handy in the future. There's still a bunch of future work to do to actually allow a non-consecutive mask of pipes, but it's a start. No functional changes. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
José Roberto de Souza <jose.souza@intel.com> Acked-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190911202908.19631-1-jani.nikula@intel.com
-
Tvrtko Ursulin authored
Since d0aa694b ("drm/i915/pmu: Always sample an active ringbuffer") the cost of sampling the engine state on execlists platforms became a little bit higher when both engine busyness and one of the wait states are being monitored. (Previously the busyness sampling on legacy platforms was done via seqno comparison so there was no cost of mmio read.) We can avoid that by skipping busyness sampling when engine supports software busy stats and so avoid the cost of potential mmio read and sample accumulation. Signed-off-by:
-
Chris Wilson authored
After we manipulate the context to allow replay after a GPU reset, force that context to be reloaded. This should be a layer of paranoia, for if the GPU was reset, the context will no longer be resident! Signed-off-by:
-
Chris Wilson authored
After a GPU reset, we need to drain all the CS events so that we have an accurate picture of the execlists state at the time of the reset. Be paranoid and force a read of the CSB write pointer from memory. Signed-off-by:
-
Chris Wilson authored
The FBC requires a couple of contiguous buffers, which we allocate from stolen memory. If stolen memory is unavailable, we cannot allocate those buffers and so cannot support FBC. Mark it so. Signed-off-by:
-
Ville Syrjälä authored
Reuse the same .modeset_calc_cdclk() function for all bxt+. The only difference in between the cnl/icl and the bxt variants is the call to cnl_compute_min_voltage_level(). We can do that call just fine on older platforms since they leave min_voltage_level[] zeroed. Let's rename the function to bxt_compute_min_voltage_level() just so it stays consistent with the rest of the naming scheme. Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Ville Syrjälä authored
The cnl and icl .modeset_calc_cdclk() functions are identical. Drop one copy. Signed-off-by:
-
Ville Syrjälä authored
We're forgetting to mask off all three pipe select bits from the CDCLK_CTL value on icl+ which may lead to the extra bit being left in. That will cause us to consider the current hardware cdclk state as invalid, and we proceed to sanitize it even though the hardware may have active pipes and whatnot. Fix up the mask so we get rid of all three pipe select bits and thus hopefully no longer sanitize cdclk when it's already correctly programmed. Cc: Matt Roper <matthew.d.roper@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111641 Fixes: 0c1279b5 ("drm/i915: Consolidate {bxt,cnl,icl}_init_cdclk") Signed-off-by:
-
Ville Syrjälä authored
On tgl/bxt/glk the cdclk bypass frequency depends on the PLL reference clock. So let's read out the ref clock before we try to compute the bypass clock. Cc: Matt Roper <matthew.d.roper@intel.com> Fixes: 71dc367e ("drm/i915: Consolidate bxt/cnl/icl cdclk readout") Signed-off-by:
-
- 11 Sep, 2019 21 commits
-
-
Jani Nikula authored
Abstract away direct access to ->num_pipes to allow further refactoring. No functional changes. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Chris Wilson authored
There's no easy way of checking whether iommu is enabled for the GPU (you can grep dmesg if you know the device, or you can grep i915_gpu_info if that's available). We do have a central i915_capabilities with the intent of listing such pertinent information, so add the iommu status. Suggested-by:
Martin Peres <martin.peres@linux.intel.com> Signed-off-by:
-
Chris Wilson authored
The same read-only affliction as befell Icelake is affecting Tigerlake. Disable the read-only support as clearly it was not fixed. Testcase: igt/i915_selftests/live_gem_context References: 3936867d ("drm/i915: Disable read only ppgtt support for gen11") Signed-off-by:
-
Ville Syrjälä authored
i915 doesn't use the crtc_state->plane_changed flag for anything, so setting it is pointless. Signed-off-by:
Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
-
Ville Syrjälä authored
system_unbound_wq can't keep up sometimes and we get dropped frames. Switch to a high priority variant. Reported-by:
Heinrich Fink <heinrich.fink@daqri.com> Tested-by:
-
Chris Wilson authored
Commit 736da811 ("drm/i915: Use literal representation of cdclk tables") pushed the cdclk logic into tables, adding glk_cdclk_table but not using yet: drivers/gpu/drm/i915/display/intel_cdclk.c:1173:38: error: ‘glk_cdclk_table’ defined but not used [-Werror=unused-const-variable=] Fixes: 736da811 ("drm/i915: Use literal representation of cdclk tables") Signed-off-by:
-
Chris Wilson authored
In preparation for reducing struct_mutex stranglehold around the vm, make the vma.flags atomic so that we can acquire a pin on the vma atomically before deciding if we need to take the mutex. Signed-off-by:
-
Kenneth Graunke authored
This allows userspace to use "legacy" mode for push constants, where they are committed at 3DPRIMITIVE or flush time, rather than being committed at 3DSTATE_BINDING_TABLE_POINTERS_XS time. Gen6-8 and Gen11 both use the "legacy" behavior - only Gen9 works in the "new" way. Conflating push constants with binding tables is painful for userspace, we would like to be able to avoid doing so. Signed-off-by:
Kenneth Graunke <kenneth@whitecape.org> Cc: stable@vger.kernel.org Reviewed-by:
-
Chris Wilson authored
Add an atomic counter and always take the spinlock around the pin/unpin events, so that we can perform the list manipulation concurrently. Signed-off-by:
-
Tvrtko Ursulin authored
These notifications operate on intel_gt so make the code take what it needs. Signed-off-by:
-
Tvrtko Ursulin authored
Both in the container_of and getting to gt->awake there is no need to go via i915 since both the wakeref and awake are members of gt. Signed-off-by:
-
Tvrtko Ursulin authored
Timelines live in struct intel_gt so make wait_for_timelines take exactly what it needs. Signed-off-by:
-
Tvrtko Ursulin authored
Code in i915_gem_init_hw is all about GT init so move it to intel_gt.c renaming to intel_gt_init_hw. Existing intel_gt_init_hw is renamed to intel_gt_init_hw_early since it is currently called from driver probe. Signed-off-by:
-
Matt Roper authored
The BXT and CNL functions were already basically identical, whereas ICL's function tried to do its own sanitization rather than calling bxt_sanitize_cdclk. This should actually fix a bug in our ICL initialization where it would consider the /2 CD2X divider invalid and force an unnecessary sanitization (we now have valid clock frequencies that use this divider). Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Matt Roper authored
When reading out the BIOS-programmed cdclk state, let's make sure that the cdclk value is on the valid list for the platform, ensure that the VCO matches the cdclk, and ensure that the CD2X divider was set properly. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Matt Roper authored
With all of the cdclk function consolidation, we can cut down on a lot of platform if/else logic by creating a vfunc that's initialized at startup. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Matt Roper authored
The uninitialize flow is the same on all of these platforms, aside from calculating a different frequency level. v2: Reverse platform conditional order for consistency. (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Matt Roper authored
The CNL variant of this function is identical to the BXT variant aside from not needing to handle SSA precharge. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Matt Roper authored
We'd previously combined ICL/TGL logic into the cnl_set_cdclk function, but BXT is pretty similar as well. Roll the cnl/icl/tgl logic back into the bxt function; the only things we really need to handle separately are punit notification and calling different functions to enable/disable the cdclk PLL. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Matt Roper authored
The bspec lays out legal cdclk frequencies, PLL ratios, and CD2X dividers in an easy-to-read table for most recent platforms. We've been translating the data from that table into platform-specific code logic, but it's easy to overlook an area we need to update when adding new cdclk values or enabling new platforms. Let's just add a form of the bspec table to the code and then adjust our functions to pull what they need directly out of the table. v2: Fix comparison when finding best cdclk. v3: Another logic fix for calc_cdclk. v4: - Use named initializers for cdclk tables. (Ville) - Include refclk as a field in the table instead of adding all three ratios for each entry. (Ville) - Terminate tables with an empty entry to avoid needing to store the table size. (Ville) - Don't try so hard to return reasonable values from our lookup functions if we get impossible inputs; just WARN and return 0. (Ville) - Keep a bxt_ prefix on the lookup functions since they're still only used on bxt+ for now. We can rename them later if we extend this table-based approach back to older platforms. (Ville) v5: - Fix cnl table's ratios for 24mhz refclk. (Ville) - Don't miss the named initializers on the cnl table. (Ville) - Represent refclk in table as u16 rather than u32. (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Matt Roper authored
Aside from a few minor register changes and some different clock values, cdclk design hasn't changed much since gen9lp. Let's consolidate the handlers for bxt, cnl, and icl to keep the codeflow consistent. Also, while we're at it, s/bxt_de_pll_update/bxt_de_pll_readout/ since "update" makes me think we should be writing to hardware rather than reading from it. v2: - Fix icl_calc_voltage_level() limits. (Ville) - Use CNL_CDCLK_PLL_RATIO_MASK rather than BXT_DE_PLL_RATIO_MASK on gen10+ to avoid confusion. (Ville) v3: - Also fix ehl_calc_voltage_level() limits. (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Suggested-by:
-
