- 08 Apr, 2010 7 commits
-
-
Ingo Molnar authored
Semantic conflict: arch/x86/kernel/cpu/perf_event_intel_ds.c Merge reason: pick up latest fixes, fix the conflict Signed-off-by:Ingo Molnar <mingo@elte.hu>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linusLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: hvc_console: Fix race between hvc_close and hvc_remove virtio: disable multiport console support. virtio: console makes incorrect assumption about virtio API virtio: console: Fix early_put_chars usage MAINTAINERS: Put the virtio-console entry in correct alphabetical order
-
Anton Blanchard authored
I don't claim to understand the tty layer, but it seems like hvc_open and hvc_close should be balanced in their kref reference counting. Right now we get a kref every call to hvc_open: if (hp->count++ > 0) { tty_kref_get(tty); <----- here spin_unlock_irqrestore(&hp->lock, flags); hvc_kick(); return 0; } /* else count == 0 */ tty->driver_data = hp; hp->tty = tty_kref_get(tty); <------ or here if hp->count was 0 But hvc_close has: tty_kref_get(tty); if (--hp->count == 0) { ... /* Put the ref obtained in hvc_open() */ tty_kref_put(tty); ... } tty_kref_put(tty); Since the outside kref get/put balance we only do a single kref_put when count reaches 0. The patch below changes things to call tty_kref_put once for every hvc_close call, and with that my machine boots fine. Signed-off-by:Anton Blanchard <anton@samba.org> Acked-by:
Amit Shah <amit.shah@redhat.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au>
-
Michael S. Tsirkin authored
Move MULTIPORT feature and related config changes out of exported headers, and disable the feature at runtime. At this point, it seems less risky to keep code around until we can enable it than rip it out completely. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Rusty Russell authored
The get_buf() API sets the second arg to the number of bytes *written* by the other side; in this case it should be zero as these are output buffers. lguest gets this right (obviously kvm's console doesn't), resulting in continual buildup of console writes. Signed-off-by:
-
François Diakhaté authored
Currently early_put_chars is not used by virtio_console because it can only be used once a port has been found, at which point it's too late because it is no longer needed. This patch should fix it. Acked-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Amit Shah authored
Move around the entry for virtio-console to keep the file sorted. Signed-off-by:
-
- 07 Apr, 2010 33 commits
-
-
Kevin Hilman authored
rwsems can be used with IRQs disabled, particularily in early boot before IRQs are enabled. Currently the spin_unlock_irq() usage in the slow-patch will unconditionally enable interrupts and cause problems since interrupts are not yet initialized or enabled. This patch uses save/restore versions of IRQ spinlocks in the slowpath to ensure interrupts are not unintentionally disabled. Signed-off-by:
Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Al Viro authored
If nfs atomic open implementation ends up doing open request from ->d_revalidate() codepath and gets an error from server, return that error to caller explicitly and don't bother with lookup_instantiate_filp() at all. ->d_revalidate() can return an error itself just fine... See http://bugzilla.kernel.org/show_bug.cgi?id=15674 http://marc.info/?l=linux-kernel&m=126988782722711&w=2 for original report. Reported-by:
Daniel J Blueman <daniel.blueman@gmail.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Linus Torvalds authored
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf, x86: Enable Nehalem-EX support perf kmem: Fix breakage introduced by 5a0e3ad6 slab.h script
-
Linus Torvalds authored
Merge branch 'davinci-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci * 'davinci-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: davinci: fix compile warning: <mach/da8xx.h>: #include <linux/platform_device.h> davinci: DM365: fix duplicate default IRQ priorities davinci: edma: clear events in edma_start() davinci: da8xx/omap-l1: fix build error when CONFIG_DAVINCI_MUX is undefined davinci: timers: don't enable timer until clocksource is initialized
-
Linus Torvalds authored
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip: x86: Fix double enable_IR_x2apic() call on SMP kernel on !SMP boards x86: Increase CONFIG_NODES_SHIFT max to 10 ibft, x86: Change reserve_ibft_region() to find_ibft_region() x86, hpet: Fix bug in RTC emulation x86, hpet: Erratum workaround for read after write of HPET comparator bootmem, x86: Fix 32bit numa system without RAM on node 0 nobootmem, x86: Fix 32bit numa system without RAM on node 0 x86: Handle overlapping mptables x86: Make e820_remove_range to handle all covered case x86-32, resume: do a global tlb flush in S4 resume
-
Sergei Shtylyov authored
This hushes the following warning: arch/arm/mach-davinci/include/mach/da8xx.h:104: warning: ‘struct platform_device’ declared inside parameter list arch/arm/mach-davinci/include/mach/da8xx.h:104: warning: its scope is only this definition or declaration, which is probably not what you want Signed-off-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by:
-
git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds authored
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Remove unused variable from ptrace microblaze: io.h: Add io big-endian function microblaze: Enable memory leak detector microblaze: Fix futex code microblaze: Fix ftrace_update_ftrace_func panic
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: mixart: range checking proc file ALSA: hda - Fix a wrong array range check in patch_realtek.c ALSA: ASoC: move dma_data from snd_soc_dai to snd_soc_pcm_stream ALSA: hda - Enable amplifiers on Acer Inspire 6530G ASoC: Only do WM8994 bias off transition from standby ASoC: Don't use DCS_DATAPATH_BUSY for WM hubs devices ASoC: Don't do runtime wm_hubs DC servo updates if using offset correction ASoC: Support second DC servo readback method for wm_hubs ASoC: Avoid wraparound in wm_hubs DC servo correction ALSA: echoaudio - Eliminate use after free ALSA: i2c: cleanup: change parameter to pointer ALSA: hda - Add MSI blacklist for Aopen MZ915-M ASoC: OMAP: Fix capture pointer handling for OMAP1510 to work correctly with recent ALSA PCM code ALSA: hda - Update document about MSI and interrupts ALSA: hda: Fix 0 dB offset for Lenovo Thinkpad models using AD1981 ALSA: hda - Add missing printk argument in previous patch ASoC: Fix passing platform_data to ac97 bus users and fix a leak ALSA: hda - Fix ADC/MUX assignment of ALC269 codec ALSA: hda - Fix invalid bit values passed to snd_hda_codec_amp_stereo() ASoC: wm8994: playback => capture
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/miscLinus Torvalds authored
* 'slabh' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc: nodemask: include slab.h from drivers/base/node.c
-
David Howells authored
Order the debugfs statistics correctly. The values displayed through a seq_printf() statement should be in the same order as the names in the format string. In the 'Lookups' line, objects created ('crt=') and lookups timed out ('tmo=') have their values transposed. Signed-off-by:David Howells <dhowells@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
David Howells authored
In NOMMU mode, the FRV segment handling is broken because KERNEL_DS == USER_DS. This causes tests of the following sort: /* don't pin down non-user-based iovecs */ if (segment_eq(get_fs(), KERNEL_DS)) return NULL; to malfunction. To fix this, make USER_DS the top of RAM instead of the top of the non-IO address space, and make KERNEL_DS one more than the top of the non-IO address space. Also get rid of FRV's __addr_ok() as nothing uses it. Signed-off-by:
-
David Howells authored
Hide uncached_access() when pgprot_noncached is not #defined. This prevents the following warning: CC drivers/char/mem.o drivers/char/mem.c:229: warning: 'uncached_access' defined but not used Repairs d7d4d849 ("drivers/char/mem.c: cleanups"). Signed-off-by:
-
Vladimir Zapolskiy authored
On exit paths in mxc_rtc_probe() method some resources are not freed correctly. This patch fixes: * unrequested memory region containing imx RTC registers * iounmap() isn't called on exit_free_pdata branch * clock get rate is called for freed clock source * clock isn't disabled on exit_put_clk branch To simplify the fix managed device resources are used. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Vladimir Zapolskiy <vzapolskiy@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Daniel Mack <daniel@caiaq.de> Signed-off-by:
-
KAMEZAWA Hiroyuki authored
Presently, memcg's FILE_MAPPED accounting has following race with move_account (happens at rmdir()). increment page->mapcount (rmap.c) mem_cgroup_update_file_mapped() move_account() lock_page_cgroup() check page_mapped() if page_mapped(page)>1 { FILE_MAPPED -1 from old memcg FILE_MAPPED +1 to old memcg } ..... overwrite pc->mem_cgroup unlock_page_cgroup() lock_page_cgroup() FILE_MAPPED + 1 to pc->mem_cgroup unlock_page_cgroup() Then, old memcg (-1 file mapped) new memcg (+2 file mapped) This happens because move_account see page_mapped() which is not guarded by lock_page_cgroup(). This patch adds FILE_MAPPED flag to page_cgroup and move account information based on it. Now, all checks are synchronous with lock_page_cgroup(). Signed-off-by:KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by:
Balbir Singh <balbir@in.ibm.com> Reviewed-by:
Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Andrea Righi <arighi@develer.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by:
-
Naoya Horiguchi authored
When we look into pagemap using page-types with option -p, the value of pfn for hugepages looks wrong (see below.) This is because pte was evaluated only once for one vma although it should be updated for each hugepage. This patch fixes it. $ page-types -p 3277 -Nl -b huge voffset offset len flags 7f21e8a00 11e400 1 ___U___________H_G________________ 7f21e8a01 11e401 1ff ________________TG________________ ^^^ 7f21e8c00 11e400 1 ___U___________H_G________________ 7f21e8c01 11e401 1ff ________________TG________________ ^^^ One hugepage contains 1 head page and 511 tail pages in x86_64 and each two lines represent each hugepage. Voffset and offset mean virtual address and physical address in the page unit, respectively. The different hugepages should not have the same offset value. With this patch applied: $ page-types -p 3386 -Nl -b huge voffset offset len flags 7fec7a600 112c00 1 ___UD__________H_G________________ 7fec7a601 112c01 1ff ________________TG________________ ^^^ 7fec7a800 113200 1 ___UD__________H_G________________ 7fec7a801 113201 1ff ________________TG________________ ^^^ OK More info: - This patch modifies walk_page_range()'s hugepage walker. But the change only affects pagemap_read(), which is the only caller of hugepage callback. - Without this patch, hugetlb_entry() callback is called per vma, that doesn't match the natural expectation from its name. - With this patch, hugetlb_entry() is called per hugepte entry and the callback can become much simpler. Signed-off-by:Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
Matt Mackall <mpm@selenic.com> Signed-off-by:
-
Yong Zhang authored
The log of commit edaac8e3 ("ratelimit: Fix/allow use in atomic contexts"), indicates that we want to suppress the callback when the trylock fails. Signed-off-by:
Yong Zhang <yong.zhang@windriver.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Yong Zhang authored
When __ratelimit() returns 1 this means that we can go ahead. Signed-off-by:
-
Yong Zhang authored
To prevent from wrongly using the return value. [akpm@linux-foundation.org: fix spello] Signed-off-by:
-
Eric Dumazet authored
commit dcefafb6 ("/dev/mem: dont allow seek to last page") inadvertently disabled rewinding on /dev/mem. This broke x86info for example. Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Acked-by:
Wu Fengguang <fengguang.wu@intel.com> Signed-off-by:
-
Andrew Morton authored
Requested by hch, for consistency now it is exported. Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Anton Blanchard <anton@samba.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@suse.cz> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
-
Anton Blanchard authored
Commit 148f948b (vfs: Introduce new helpers for syncing after writing to O_SYNC file or IS_SYNC inode) broke the raw driver. We now call through generic_file_aio_write -> generic_write_sync -> vfs_fsync_range. vfs_fsync_range has: if (!fop || !fop->fsync) { ret = -EINVAL; goto out; } But drivers/char/raw.c doesn't set an fsync method. We have two options: fix it or remove the raw driver completely. I'm happy to do either, the fact this has been broken for so long suggests it is rarely used. The patch below adds an fsync method to the raw driver. My knowledge of the block layer is pretty sketchy so this could do with a once over. If we instead decide to remove the raw driver, this patch might still be useful as a backport to 2.6.33 and 2.6.32. Signed-off-by:
Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jens Axboe <jens.axboe@oracle.com> Reviewed-by:
Jeff Moyer <jmoyer@redhat.com> Tested-by:
-
Alexander Shishkin authored
Since Valentin's email address @siemens.com is no longer valid, it's time to change it to the one that actually works so that I don't have to manually forward patches against mb862xx to him every time. Signed-off-by:
Alexander Shishkin <virtuoso@slind.org> Acked-by:
Valentin Sitdikov <v.sitdikov@gmail.com> Signed-off-by:
-
Randy Dunlap authored
mb862xxfb_accel built as a separate module, but it does not have a MODULE_LICENSE, so it taints the kernel. Add a MODULE_LICENSE to it (same as mb862xxfb license). mb862xxfb_accel: module license 'unspecified' taints kernel. Or should mb862xxfb_accel be built into the mb862xxfb binary file instead? Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Acked-by:
-
KOSAKI Motohiro authored
Shaohua Li reported his tmpfs streaming I/O test can lead to make oom. The test uses a 6G tmpfs in a system with 3G memory. In the tmpfs, there are 6 copies of kernel source and the test does kbuild for each copy. His investigation shows the test has a lot of rotated anon pages and quite few file pages, so get_scan_ratio calculates percent[0] (i.e. scanning percent for anon) to be zero. Actually the percent[0] shoule be a big value, but our calculation round it to zero. Although before commit 84b18490 ("vmscan: get_scan_ratio() cleanup") , we have the same problem too. But the old logic can rescue percent[0]==0 case only when priority==0. It had hided the real issue. I didn't think merely streaming io can makes percent[0]==0 && priority==0 situation. but I was wrong. So, definitely we have to fix such tmpfs streaming io issue. but anyway I revert the regression commit at first. This reverts commit 84b18490. Signed-off-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reported-by:
Shaohua Li <shaohua.li@intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Signed-off-by:
-
Anton Blanchard authored
I hit this when we had a bug in IDR for a few days. Basically sysfs would fail to create new inodes since it uses an IDR and therefore class_create would fail. While we are unlikely to see this fail we may as well handle it instead of oopsing. Signed-off-by:
-
Wu Fengguang authored
btrfs relocate_file_extent_cluster() calls us with NULL filp: [ 4005.426805] BUG: unable to handle kernel NULL pointer dereference at 00000021 [ 4005.426818] IP: [<c109a130>] page_cache_sync_readahead+0x18/0x3e Signed-off-by:
Kirill A. Shutemov <kirill@shutemov.name> Tested-by:
-
Wolfram Sang authored
Made necessary by 6992f533 ("sysfs: Use one lockdep class per sysfs attribute"). Prevents further "key xxx not in .data" bug-reports. Although some attributes could probably be converted to static ones, this is left for people having hardware to test. Found by this semantic patch: @ init @ type T; identifier A; @@ T { ... struct device_attribute A; ... }; @ main extends init @ expression E; statement S; identifier err; T *name; @@ ... when != sysfs_attr_init(&name->A.attr); ( + sysfs_attr_init(&name->A.attr); if (device_create_file(E, &name->A)) S | + sysfs_attr_init(&name->A.attr); err = device_create_file(E, &name->A); ) While reviewing, I put the initialization to apropriate places. Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg KH <gregkh@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Mike Isely <isely@pobox.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Sujith Thomas <sujith.thomas@intel.com> Cc: Matthew Garrett <mjg@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by:
-
Sergey Senozhatsky authored
Initialize sysfs attributes before device_create_file call. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=15548Signed-off-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Greg KH <gregkh@suse.de> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Len Brown <len.brown@intel.com> Signed-off-by:
-
Dan Carpenter authored
We take the spin_lock again in fail_all_cmds() so we need to unlock here. Signed-off-by:
Dan Carpenter <error27@gmail.com> Acked-by:
Steve Cameron <scameron@beardog.cce.hp.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
-
Dan Carpenter authored
This should be spin_lock_irq() to match the spin_unlock_irq(). Originally it was a lock_kernel() but we switched everything to spin_lock_irq() last November. [akpm@linux-foundation.org: fix the MOXA_ASPP_MON case too (per Jiri)] Signed-off-by:
-
Madhusudhan Chikkature authored
The reset of data lines when the card is removed from the cage results in a failure.The failure is seen if the card is removed from the cage when TC is pending after a CMD with data received CC.The reset logic leaves the controller in a state where niether a TC is received nor DTO. The rest code can be safely removed here since it is taken care in the IRQ handler. Signed-off-by:
Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by:
-
Julia Lawall authored
In an error handling case the lock is not unlocked. The return is converted to a goto, to share the unlock at the end of the function. A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression E1; identifier f; @@ f (...) { <+... * spin_lock_irqsave (E1,...); ... when != E1 * return ...; ...+> } // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Cc: <richard.rojfors@pelagicore.com> Signed-off-by:
-
Julia Lawall authored
rs_init() is failing to restore interrupts on two error paths, and is incorrectly calling tty_unregister_driver() with local interrupts disabled. Fix these things by disabling interrupts later, after the reauest_irq() calls. A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression E1; identifier f; @@ f (...) { <+... * local_irq_save (E1,...); ... when != E1 * return ...; ...+> } // </smpl> [akpm@linux-foundation.org: reimplement the fix] Signed-off-by:
-
