- 22 Mar, 2011 36 commits
-
-
Ondrej Zary authored
Enable Data Transfer Position Control (DTPC). This is needed at least on Virge/DX to correctly display at higher pixclocks. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Ondrej Zajicek <santiago@crfreenet.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Ondrej Zary authored
Enable pixel multiplexing in 15/16bpp modes when pixclock is over 115MHz on Trio3D (86C365) cards to fix artifacts on the left side of screen. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Ondrej Zajicek <santiago@crfreenet.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Ondrej Zary authored
Add support for S3 Trio3D (86C365) cards to s3fb driver. Tested with one 4MB card. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Ondrej Zajicek <santiago@crfreenet.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Ondrej Zary authored
Maximize virtual vertical framebuffer size during init to allow fast scrolling (accelerated by panning). Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Ondrej Zajicek <santiago@crfreenet.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
David Miller authored
This allows the driver to work in multi-domain PCI configurations. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
David Miller authored
This allows the driver to work in multi-domain PCI configurations. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
David Miller authored
This allows the driver to work in multi-domain PCI configurations. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
David Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
David Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
David Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
David Miller authored
Instead of just plain NULL. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
David Miller authored
Instead of just plain NULL. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
David Miller authored
Instead of just plain NULL. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
David Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
David Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
David Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
David Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
David Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
David Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
David Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
David Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
David Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
David Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
David Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
David Miller authored
And use vga_{r,w}(). Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
David Miller authored
Instead of magic register location constants. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Aaro Koskinen authored
Add support for ZGI Z9 DDR2 POST. The init sequence is from XGI's xgifb driver. Tested with ARM board using a PCI card with XGI Z9s and 32 MB DDR2 memory. After a cold reset the POST succeeds. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Aaro Koskinen authored
Move DDR2 register setting code into separate subroutines. No changes in functionality. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Aaro Koskinen authored
Detect the XGI Z9 RAM type as "documented" by the XGI's xgifb driver. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Aaro Koskinen authored
Z7 and Z9 have the same PCI ID, so additional checking is needed to detect Z9. The method was "documented" in XGI's xgifb driver. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Aaro Koskinen authored
Move XGI POST RAM type detection into a separate subroutine to make further code changes easier. No changes in functionality Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Aaro Koskinen authored
Currently there is no indication if R/W test fails during POST. This can happen e.g. when user plugs in a card with unsupported type of memory. Since the driver will be unusable, it's better to fail the whole POST if the memory cannot be configured properly. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Kirill A. Shutemov authored
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Kirill A. Shutemov authored
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
TI folks seem to have a rather schizophrenic relationship with author naming conventions, stub in mailmap entries to match with the sign-off convention. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
git://gitorious.org/linux-omap-dss2/linuxPaul Mundt authored
Conflicts: arch/arm/mach-omap2/board-overo.c Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
- 21 Mar, 2011 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6Linus Torvalds authored
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: kbuild: Make DEBUG_SECTION_MISMATCH selectable, but not on by default genksyms: Regenerate lexer and parser genksyms: Track changes to enum constants genksyms: simplify usage of find_symbol() genksyms: Add helpers for building string lists genksyms: Simplify printing of symbol types genksyms: Simplify lexer genksyms: Do not paste the bison header file to lex.c modpost: fix trailing comma KBuild: silence "'scripts/unifdef' is up to date." kbuild: Add extra gcc checks kbuild: reenable section mismatch analysis unifdef: update to upstream version 2.5
-
Jesper Juhl authored
This patch reduces the number of sequential pointer derefs in drivers/scsi/scsi_error.c This has been submitted a number of times over a couple of years. I believe this version adresses all comments it has gathered over time. Please apply or reject with a reason. The benefits are: - makes the code easier to read. Lots of sequential derefs of the same pointers is not easy on the eye. - theoretically at least, just dereferencing the pointers once can allow the compiler to generally slightly faster code, so in theory this could also be a micro speed optimization. - reduces size of object file (tiny effect: on x86-64, in at least one configuration, the text size decreased from 9439 bytes to 9400) - removes some pointless (mostly trailing) whitespace. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Gary Hade authored
Remove incorrect Matrox G200eV support that was previously added by commit e3a19388 A serious issue with the incorrect G200eV support that reproduces on the Matrox G200eV equipped IBM x3650 M2 is the total lack of text (login banner, login prompt, etc) on the console when X is not running and total lack of text on all of the virtual consoles after X is started. Any concerns that the incorrect code (upstream since October 2008) has been successfully used on non-IBM G200eV equipped system(s) appear to be unwarranted. In addition to the serious/non-intermittent nature of issues that have been spotted on IBM systems, complete removal of the incorrect code is clearly supported by the following Matrox (Yannick Heneault) provided input: "It impossible that this patch should have work on a system. The patch only declare the G200eV as a regular G200 which is not case. Many registers are different, including at least the PLL programming sequence. If the G200eV is programmed like a regular G200, it will not display anything." v1 - Initial patch that removed the incorrect code for _all_ G200eV equipped systems. v2 - Darrick Wong provided patch that blacklisted the incorrect code on G200eV equipped IBM systems leaving it enabled on all G200eV equipped non-IBM systems. v3 - Same code changes included with v1 plus additional justification for complete removal of the incorrect code. Signed-off-by: Gary Hade <garyhade@us.ibm.com> Cc: Darrick J. Wong <djwong@us.ibm.com> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Petr Vandrovec <vandrove@vc.cvut.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Yannick Heneault <yannick_heneault@matrox.com> Cc: Christian Toutant <ctoutant@matrox.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://oss.sgi.com/xfs/xfsLinus Torvalds authored
* 'for-linus' of git://oss.sgi.com/xfs/xfs: (23 commits) xfs: don't name variables "panic" xfs: factor agf counter updates into a helper xfs: clean up the xfs_alloc_compute_aligned calling convention xfs: kill support/debug.[ch] xfs: Convert remaining cmn_err() callers to new API xfs: convert the quota debug prints to new API xfs: rename xfs_cmn_err_fsblock_zero() xfs: convert xfs_fs_cmn_err to new error logging API xfs: kill xfs_fs_mount_cmn_err() macro xfs: kill xfs_fs_repair_cmn_err() macro xfs: convert xfs_cmn_err to xfs_alert_tag xfs: Convert xlog_warn to new logging interface xfs: Convert linux-2.6/ files to new logging interface xfs: introduce new logging API. xfs: zero proper structure size for geometry calls xfs: enable delaylog by default xfs: more sensible inode refcounting for ialloc xfs: stop using xfs_trans_iget in the RT allocator xfs: check if device support discard in xfs_ioc_trim() xfs: prevent leaking uninitialized stack memory in FSGEOMETRY_V1 ...
-