This backmerges Linus' merge commit of the latest drm-fixes pull:

commit 549f3a12
Merge: 42577ca8 058ca4a2
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date:   Tue Jul 23 15:47:08 2013 -0700

    Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

We've accrued a few too many conflicts, but the real reason is that I
want to merge the 100% solution for Haswell concurrent registers
writes into drm-intel-next. But that depends upon the 90% bandaid
merged into -fixes:

commit a7cd1b8f
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Fri Jul 19 20:36:51 2013 +0100

    drm/i915: Serialize almost all register access

Also, we can roll up on accrued conflicts.

Usually I'd backmerge a tagged -rc, but I want to get this done before
heading off to vacations next week ;-)

Conflicts:
	drivers/gpu/drm/i915/i915_dma.c
	drivers/gpu/drm/i915/i915_gem.c

v2: For added hilarity we have a init sequence conflict around the
gt_lock, so need to move that one, too. Spotted by Jani Nikula.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

This function is called without the dev->struct_mutex held, hence we
need to use the _unlocked unreference variants.

As soon as the object is registered userspace can sneak in here with a
gem_close ioctl call, so the object can (and with my new evil tests
actually does) get the final unreference in this place. The lack of
locking then results in hilarity and some good leakage.

To fix this we simply need to revert

Chris Wilson <chris@chris-wilson.co.uk>

v2: We need to make the trace call _before_ we drop our ref - the
object might very well be gone by then already.

v3: Just revert the original patch as suggested by Chris Wilson.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Remove the added white line again to tighten the return
block, requested by Chris.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

So I made the mistake of missing that the desktop and mobile chipsets
have different layouts in their PCI configurations, and we were
incorrectly setting the wrong physical address for stolen memory on
mobile chipsets.

Since all gen3+ are actually consistent in the location of the GBSM
register in the PCI configuration space on device 2 (the GPU), use it.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
[danvet: Drop cc: stable and fudge conflicts.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Our phys_object code can't deal with stolen memory and so blows up.
Fixing this is quite a bit of work and not worth it much for a single
page object, so just opt-out.

This is necessary prep work to enable stolen on gen2/3 platforms where
the overlay register file isn't stored in the gtt.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

For now there are no callers, but these functions are going to be
needed for the code that allows Package C8+. Other future features may
also require this code.

Also merge the commit which introduced assert_can_disable_lcpll and
had the following commit message:

Most of the hardware needs to be disabled before LCPLL is disabled, so
let's add a function to assert some of items listed in the "Display
Sequences for LCPLL disabling" documentation.

The idea is that hsw_disable_lcpll should not disable the hardware,
the callers need to take care of calling hsw_disable_lcpll only once
everything is already disabled.

v2: - Rebase.
    - Fix D_COMP wait timeout.
v3: - Use wait_for_atomic_use (Ben)
    - Remove/add a useless/needed POSTING_READ (Ben)
    - Early return in case LCPLL is already restored (Ben)
    - Add ndelay(100) (Ben)
v4: - Merge the commit that added assert_can_disable_lcpll (Ben)
    - Add interrupt assertions (Ben)
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
[danvet: Fix compile fail since there's no HAS_LP_PCH yet.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

We currently don't support HDMI clock bending nor use SSC for DP or
HDMI on Haswell, so the only case where we need CLKOUT_DP is for VGA.

v2: - Replace the IS_ULT check for LPT-LP
    - Simplify GEN0/DBUFF0 check due to change on the previous patch
    - Also check for SBI_SSCCTL_DISABLE (Ben).
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Now it implements 3 different sequences from BSpec and also has
support for ULT.

v2: - Change IS_ULT checks for LPT-LP checks
    - Add check for LPT-LP + with_fdi (Ben)
    - Merge DBUFF0/GEN0 bit definitions since they're the same
      register (Ben)
    - DBUFF0 (1<<0) is Disable, not Enable
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

This has been broken in

commit 2f633156
Author: Ben Widawsky <ben@bwidawsk.net>
Date:   Wed Jul 17 12:19:03 2013 -0700

    drm/i915: Create VMAs

which resulted in an OOPS the first time around we've hit -ENOSPC.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67156
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Tested-by: meng <mengmeng.meng@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Try to decypher detection failures is a little tricker at the moment as
the only indicator of progress is when output_poll_execute() tells us
the result after the connector->detect() has run. This patch adds a
telltale to the start of each detect function so that we can track
progress and associate activity more clearly with each connector.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Pull drm fixes from Dave Airlie:
 "This is just a regular fixes pull, mostly nouveau and i915, the i915
  ones fix RC6 on Sandybridge after suspend/resume, which I think people
  have be wanting for quite a while!

  Now you shouldn't wish for more patches, as the new mutex/reservation
  code found a number of problems with the qxl driver, and it currently
  makes lockdep angry, I'm working on a set of fixes for it, but its a
  bit large, I'll submit them separately later today or tomorrow once
  I've banged on them a bit more, just warning you in advance :-)"

Yeah, I'm definitely over the whole "wish for more patches" thing.

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/crtc-helper: explicit DPMS on after modeset
  drm/i915: fix up gt init sequence fallout
  drm/i915: Serialize almost all register access
  drm/i915: quirk no PCH_PWM_ENABLE for Dell XPS13 backlight
  drm/i915: correctly restore fences with objects attached
  drm/i915: Fix dereferencing invalid connectors in is_crtc_connector_off()
  drm/i915: Sanitize shared dpll state
  drm/i915: fix long-standing SNB regression in power consumption after resume v2
  drm/i915: Preserve the DDI_A_4_LANES bit from the bios
  drm/i915: fix pfit regression for non-autoscaled resolutions
  drm/i915: fix up readout of the lvds dither bit on gen2/3
  drm/nouveau: do not allow negative sizes for now
  drm/nouveau: add falcon interrupt handler
  drm/nouveau: use dedicated channel for async moves on GT/GF chipsets.
  drm/nouveau: bump fence timeout to 15 seconds
  drm/nouveau: do not unpin in nouveau_gem_object_del
  drm/nv50/kms: fix pin refcnt leaks
  drm/nouveau: fix some error-path leaks in fbcon handling code
  drm/nouveau: fix locking issues in page flipping paths

Fix __wait_on_atomic_t() so that it calls the action func if the counter != 0
rather than if the counter is 0 so as to be analogous to __wait_on_bit().

Thanks to Yacine who found this by visual inspection.

This will affect FS-Cache in that it will could fail to sleep correctly when
trying to clean up after a netfs cookie is withdrawn.
Reported-by: Yacine Belkadi <yacine.belkadi.1@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
cc: Milosz Tanski <milosz@adfin.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull alpha architecture fixes from Matt Turner:
 "This contains mostly clean ups and fixes but also an implementation of
  atomic64_dec_if_positive() and a pair of new syscalls"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
  alpha: Use handle_percpu_irq for the timer interrupt
  alpha: Force the user-visible HZ to a constant 1024.
  alpha: Don't if-out dp264_device_interrupt.
  alpha: Use __builtin_alpha_rpcc
  alpha: Fix type compatibility warning for marvel_map_irq
  alpha: Generate dwarf2 unwind info for various kernel entry points.
  alpha: Implement atomic64_dec_if_positive
  alpha: Improve atomic_add_unless
  alpha: Modernize lib/mpi/longlong.h
  alpha: Add kcmp and finit_module syscalls
  alpha: locks: remove unused arch_*_relax operations
  alpha: kernel: typo issue, using '1' instead of '11'
  alpha: kernel: using memcpy() instead of strcpy()
  alpha: Convert print_symbol to %pSR

Pull vhost fixes from Michael Tsirkin:
 "vhost: more fixes for 3.11

  This includes some fixes for vhost net and scsi drivers.

  The test module has already been reworked to avoid rcu usage, but the
  necessary core changes are missing, we fixed this.

  Unlikely to affect any real-world users, but it's early in the cycle
  so, let's merge them"

(It was earlier when Michael originally sent the email, but it somehot
got missed in the flood, so here it is after -rc2)

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vhost: Remove custom vhost rcu usage
  vhost-scsi: Always access vq->private_data under vq mutex
  vhost-net: Always access vq->private_data under vq mutex

Pull fuse bugfixes from Miklos Szeredi:
 "These are bugfixes and a cleanup to the "readdirplus" feature"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: readdirplus: cleanup
  fuse: readdirplus: change attributes once
  fuse: readdirplus: fix instantiate
  fuse: readdirplus: sanity checks
  fuse: readdirplus: fix dentry leak

The calculation of the attribute length was 4 bytes off.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Tested-by: Andre Heider <a.heider@gmail.com>
Reported-and-tested-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull tracing fixes and cleanups from Steven Rostedt:
 "This contains fixes, optimizations and some clean ups

  Some of the fixes need to go back to 3.10.  They are minor, and deal
  mostly with incorrect ref counting in accessing event files.

  There was a couple of optimizations that should have perf perform a
  bit better when accessing trace events.

  And some various clean ups.  Some of the clean ups are necessary to
  help in a fix to a theoretical race between opening a event file and
  deleting that event"

* tag 'trace-3.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Kill the unbalanced tr->ref++ in tracing_buffers_open()
  tracing: Kill trace_array->waiter
  tracing: Do not (ab)use trace_seq in event_id_read()
  tracing: Simplify the iteration logic in f_start/f_next
  tracing: Add ref_data to function and fgraph tracer structs
  tracing: Miscellaneous fixes for trace_array ref counting
  tracing: Fix error handling to ensure instances can always be removed
  tracing/kprobe: Wait for disabling all running kprobe handlers
  tracing/perf: Move the PERF_MAX_TRACE_SIZE check into perf_trace_buf_prepare()
  tracing/syscall: Avoid perf_trace_buf_*() if sys_data->perf_events is empty
  tracing/function: Avoid perf_trace_buf_*() if event_function.perf_events is empty
  tracing: Typo fix on ring buffer comments
  tracing: Use trace_seq_puts()/trace_seq_putc() where possible
  tracing: Use correct config guard CONFIG_STACK_TRACER

Pull thermal management fixes from Zhang Rui:
 "These are fixes collected over the last week, they fixes several
  problems caused by the x86_pkg_temp_thermal introduced in 3.11-rc1.

  Specifics:

   - the x86_pkg_temp_thermal driver causes crash on systems with no
     package MSR support as there is a bug in the logic to check
     presence of DTHERM and PTS feature together.  Added a change so
     that when there is no PTS support, module doesn't get loaded.

   - fix krealloc() misuse in pkg_temp_thermal_device_add().

     If krealloc() returns NULL, it doesn't free the original.  Thus if
     we want to exit because of the krealloc() failure, we must make
     sure the original one is freed.

   - The error code path of the x86 package temperature thermal driver's
     initialization routine makes an unbalanced call to
     get_online_cpus(), which causes subsequent CPU offline operations,
     and consequently system suspend, to permanently block in
     cpu_hotplug_begin() on systems where get_core_online() returns an
     error code.

     Remove the extra get_online_cpus() to fix the problem"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  Thermal: Fix lockup of cpu_down()
  Thermal: x86_pkg_temp: Limit number of pkg temp zones
  Thermal: x86_pkg_temp: fix krealloc() misuse in in pkg_temp_thermal_device_add()
  Thermal: x86 package temp thermal crash

Pull gpio fixes from Linus Walleij:
 "A first round of GPIO fixes for the v3.11 series:
   - OMAP device tree boot fix
   - Handle an error condition in the MSM driver

  The OMAP patches have been around since around the merge window, but
  since they first caused more breakage I let them boil in -next for a
  while.  These should be fine now"

* tag 'gpio-for-v3.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  drivers: gpio: msm: Fix the error condition for reading ngpio
  gpio/omap: fix build error when OF_GPIO is not defined.
  gpio/omap: auto request GPIO as input if used as IRQ via DT
  gpio/omap: don't create an IRQ mapping for every GPIO on DT

Pull block IO driver bits from Jens Axboe:
 "As I mentioned in the core block pull request, due to real life
  circumstances the driver pull request would be late.  Now it looks
  like -rc2 late...  On the plus side, apart form the rsxx update, these
  are all things that I could argue could go in later in the cycle as
  they are fixes and not features.  So even though things are late, it's
  not ALL bad.

  The pull request contains:

   - Updates to bcache, all bug fixes, from Kent.

   - A pile of drbd bug fixes (no big features this time!).

   - xen blk front/back fixes.

   - rsxx driver updates, some of them deferred form 3.10.  So should be
     well cooked by now"

* 'for-3.11/drivers' of git://git.kernel.dk/linux-block: (63 commits)
  bcache: Allocation kthread fixes
  bcache: Fix GC_SECTORS_USED() calculation
  bcache: Journal replay fix
  bcache: Shutdown fix
  bcache: Fix a sysfs splat on shutdown
  bcache: Advertise that flushes are supported
  bcache: check for allocation failures
  bcache: Fix a dumb race
  bcache: Use standard utility code
  bcache: Update email address
  bcache: Delete fuzz tester
  bcache: Document shrinker reserve better
  bcache: FUA fixes
  drbd: Allow online change of al-stripes and al-stripe-size
  drbd: Constants should be UPPERCASE
  drbd: Ignore the exit code of a fence-peer handler if it returns too late
  drbd: Fix rcu_read_lock balance on error path
  drbd: fix error return code in drbd_init()
  drbd: Do not sleep inside rcu
  bcache: Refresh usage docs
  ...

Merge tag 'drm-intel-fixes-2013-07-22' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes

- fixup panel fitter readout for gen2/3 (just quitens dmesg noise)
- fix pft computations for non-autoscaled resolutions (i.e. letter/pillar
  boxing on gen2/3)
- preserve the DDI A/E lane sharing bit (Stéphane Marchesin)
- fix the "rc6 fails to work after resume" regression, big thanks to
  Konstantin Khlebnikov for the patch and debug insight about what
  actually might be going on here
- fix Oops in is_crtc_connector_off (Chris)
- sanitize shared dpll state - our new paranoid state checker tripped up
  over dirt left behind by the BIOS
- correctly restore fences, fixes the "my screen is all messed up after
  resume" regression introduced in the final 3.10 pull request
- quirk backlights harder, this time for Dell XPS13 machines to fix a
  regression (patch from Kamal Mostafa)
- 90% fix for some haswell hangs when accessing registers concurrently,
  the 100% solution is simply too invasive for -fixes and what we have
  here seems to be good enough (Chris)

* tag 'drm-intel-fixes-2013-07-22' of git://people.freedesktop.org/~danvet/drm-intel:
  drm/i915: fix up gt init sequence fallout
  drm/i915: Serialize almost all register access
  drm/i915: quirk no PCH_PWM_ENABLE for Dell XPS13 backlight
  drm/i915: correctly restore fences with objects attached
  drm/i915: Fix dereferencing invalid connectors in is_crtc_connector_off()
  drm/i915: Sanitize shared dpll state
  drm/i915: fix long-standing SNB regression in power consumption after resume v2
  drm/i915: Preserve the DDI_A_4_LANES bit from the bios
  drm/i915: fix pfit regression for non-autoscaled resolutions
  drm/i915: fix up readout of the lvds dither bit on gen2/3

Commit f1a18a10 "Thermal: CPU Package temperature thermal" had code
that did a get_online_cpus(), run a loop and then do a
put_online_cpus(). The problem is that the loop had an error exit that
would skip the put_online_cpus() part.

In the error exit part of the function, it also did a get_online_cpus(),
run a loop and then put_online_cpus(). The only way to get to the error
exit part is with get_online_cpus() already performed. If this error
condition is hit, the system will be prevented from taking CPUs offline.
The process taking the CPU offline will lock up hard.

Removing the get_online_cpus() removes the lockup as the hotplug CPU
refcount is back to zero.

This was bisected with ktest.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

Fixes for some locking issues, and fence timeouts.

* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
  drm/nouveau: do not allow negative sizes for now
  drm/nouveau: add falcon interrupt handler
  drm/nouveau: use dedicated channel for async moves on GT/GF chipsets.
  drm/nouveau: bump fence timeout to 15 seconds
  drm/nouveau: do not unpin in nouveau_gem_object_del
  drm/nv50/kms: fix pin refcnt leaks
  drm/nouveau: fix some error-path leaks in fbcon handling code
  drm/nouveau: fix locking issues in page flipping paths

Atm the crtc helper implementation of set_config has really
inconsisten semantics: If just an fb update is good enough, dpms state
will be left as-is, but if we do a full modeset we force everything to
dpms on.

This change has already been applied to the i915 modeset code in

commit e3de42b6
Author: Imre Deak <imre.deak@intel.com>
Date:   Fri May 3 19:44:07 2013 +0200

    drm/i915: force full modeset if the connector is in DPMS OFF mode

which according to Greg KH seems to aim for a new record in most
Bugzilla: links in a commit message.

The history of this dpms forcing is pretty interesting. This patch
here is an almost-revert of

commit 811aaa55
Author: Keith Packard <keithp@keithp.com>
Date:   Thu Feb 3 16:57:28 2011 -0800

    drm: Only set DPMS ON when actually configuring a mode

which fixed the bug of trying to dpms on disabled outputs, but
introduced the new discrepancy between an fb update only and full
modesets. The actual introduction of this goes back to

commit bf9dc102
Author: Keith Packard <keithp@keithp.com>
Date:   Fri Nov 26 10:45:58 2010 -0800

    drm: Set connector DPMS status to ON in drm_crtc_helper_set_config

And if you'd dig around in the i915 driver code there's even more fun
around forcing dpms on and losing our heads and temper of the
resulting inconsistencies. Especially the DP re-training code had tons
of funny stuff in it.

v2: So v1 totally blew up on resume on my radeon system here. After
much head-scraching I've figured out that the radeon resume functions
resumes the console system _before_ it actually restores all the
modeset state. And resuming the console systems means that fbdev doeas
an immediate ->set_par call.

Now up to this patch that ->set_par did absolutely nothing: All the
old sw state from pre-suspend was still around (since the modeset
reset wasn't done yet), which means that the set_config calls done as
a result of the ->set_par where all treated as no-ops (despite that
the real hw state was obviously something completely different).

Since v1 of this patch just added a bunch of ->dpms calls if the crtc
was enabled, those set_config calls suddenly stopped being no-ops. But
because the hw state wasn't restored the ->dpms callbacks resulted in
decent amounts of hilarity and eventual full hangs.

Since I can't review all kms drivers for such tricky ordering
constraints v2 opts for a different approach and forces a full modeset
if the connector dpms state isnt' DPMS_ON. Since the ->dpms callbacks
implemented by the modeset helpers update the connector->dpms property
we have the same effect of ensuring that the pipe is ultimately turned
on, even if we just end up updating the fb. This is the same approac
we ended up using in the intel driver.

Note that besides i915.ko only all other drivers eventually call
drm_helper_connector_dpms with the exception of vmwgfx, which does not
support dmps at all.

v3: Dave Airlie merged the broken first version of this patch, so
squash in the revert of

commit 372835a8
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Sat Jun 15 00:13:13 2013 +0200

    drm/crtc-helper: explicit DPMS on after modeset

Also fix up the spelling fail a bit in the commit message while at it.

Cc: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67043Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Pull ACPI video support fixes from Rafael Wysocki:
 "I'm sending a separate pull request for this as it may be somewhat
  controversial.  The breakage addressed here is not really new and the
  fixes may not satisfy all users of the affected systems, but we've had
  so much back and forth dance in this area over the last several weeks
  that I think it's time to actually make some progress.

  The source of the problem is that about a year ago we started to tell
  BIOSes that we're compatible with Windows 8, which we really need to
  do, because some systems shipping with Windows 8 are tested with it
  and nothing else, so if we tell their BIOSes that we aren't compatible
  with Windows 8, we expose our users to untested BIOS/AML code paths.

  However, as it turns out, some Windows 8-specific AML code paths are
  not tested either, because Windows 8 actually doesn't use the ACPI
  methods containing them, so if we declare Windows 8 compatibility and
  attempt to use those ACPI methods, things break.  That occurs mostly
  in the backlight support area where in particular the _BCM and _BQC
  methods are plain unusable on some systems if the OS declares Windows
  8 compatibility.

  [ The additional twist is that they actually become usable if the OS
    says it is not compatible with Windows 8, but that may cause
    problems to show up elsewhere ]

  Investigation carried out by Matthew Garrett indicates that what
  Windows 8 does about backlight is to leave backlight control up to
  individual graphics drivers.  At least there's evidence that it does
  that if the Intel graphics driver is used, so we've decided to follow
  Windows 8 in that respect and allow i915 to control backlight (Daniel
  likes that part).

  The first commit from Aaron Lu makes ACPICA export the variable from
  which we can infer whether or not the BIOS believes that we are
  compatible with Windows 8.

  The second commit from Matthew Garrett prepares the ACPI video driver
  by making it initialize the ACPI backlight even if it is not going to
  be used afterward (that is needed for backlight control to work on
  Thinkpads).

  The third commit implements the actual workaround making i915 take
  over backlight control if the firmware thinks it's dealing with
  Windows 8 and is based on the work of multiple developers, including
  Matthew Garrett, Chun-Yi Lee, Seth Forshee, and Aaron Lu.

  The final commit from Aaron Lu makes us follow Windows 8 by informing
  the firmware through the _DOS method that it should not carry out
  automatic brightness changes, so that brightness can be controlled by
  GUI.

  Hopefully, this approach will allow us to avoid using blacklists of
  systems that should not declare Windows 8 compatibility just to avoid
  backlight control problems in the future.

   - Change from Aaron Lu makes ACPICA export a variable which can be
     used by driver code to determine whether or not the BIOS believes
     that we are compatible with Windows 8.

   - Change from Matthew Garrett makes the ACPI video driver initialize
     the ACPI backlight even if it is not going to be used afterward
     (that is needed for backlight control to work on Thinkpads).

   - Fix from Rafael J Wysocki implements Windows 8 backlight support
     workaround making i915 take over bakclight control if the firmware
     thinks it's dealing with Windows 8.  Based on the work of multiple
     developers including Matthew Garrett, Chun-Yi Lee, Seth Forshee,
     and Aaron Lu.

   - Fix from Aaron Lu makes the kernel follow Windows 8 by informing
     the firmware through the _DOS method that it should not carry out
     automatic brightness changes, so that brightness can be controlled
     by GUI"

* tag 'acpi-video-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / video: no automatic brightness changes by win8-compatible firmware
  ACPI / video / i915: No ACPI backlight if firmware expects Windows 8
  ACPI / video: Always call acpi_video_init_brightness() on init
  ACPICA: expose OSI version

The regression fix for gen6+ rps fallout

commit 7dcd2677
Author: Konstantin Khlebnikov <khlebnikov@openvz.org>
Date:   Wed Jul 17 10:22:58 2013 +0400

    drm/i915: fix long-standing SNB regression in power consumption after resume

unintentionally also changed the init sequence ordering between
gt_init and gt_reset - we need to reset BIOS damage like leftover
forcewake references before we run our own code. Otherwise we can get
nasty dmesg noise like

[drm:__gen6_gt_force_wake_mt_get] *ERROR* Timed out waiting for forcewake old ack to clear.

again. Since _reset suggests that we first need to have stuff
initialized (which isn't the case here) call it sanitze instead.

While at it also block out the rps disable introduced by the above
commit on ilk: We don't have any knowledge of ilk rps being broken in
similar ways. And the disable functions uses the default hw state
which is only read out when we're enabling rps. So essentially we've
been writing random grabage into that register.
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: stable@vger.kernel.org
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Pull ext[34] tmpfile bugfix from Ted Ts'o:
 "Fix regression caused by commit af51a2ac which added ->tmpfile()
  support (along with a similar fix for ext3)"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext3: fix a BUG when opening a file with O_TMPFILE flag
  ext4: fix a BUG when opening a file with O_TMPFILE flag

When we try to open a file with O_TMPFILE flag, we will trigger a bug.
The root cause is that in ext4_orphan_add() we check ->i_nlink == 0 and
this check always fails because we set ->i_nlink = 1 in
inode_init_always().  We can use the following program to trigger it:

int main(int argc, char *argv[])
{
	int fd;

	fd = open(argv[1], O_TMPFILE, 0666);
	if (fd < 0) {
		perror("open ");
		return -1;
	}
	close(fd);
	return 0;
}

The oops message looks like this:

kernel: kernel BUG at fs/ext3/namei.c:1992!
kernel: invalid opcode: 0000 [#1] SMP
kernel: Modules linked in: ext4 jbd2 crc16 cpufreq_ondemand ipv6 dm_mirror dm_region_hash dm_log dm_mod parport_pc parport serio_raw sg dcdbas pcspkr i2c_i801 ehci_pci ehci_hcd button acpi_cpufreq mperf e1000e ptp pps_core ttm drm_kms_helper drm hwmon i2c_algo_bit i2c_core ext3 jbd sd_mod ahci libahci libata scsi_mod uhci_hcd
kernel: CPU: 0 PID: 2882 Comm: tst_tmpfile Not tainted 3.11.0-rc1+ #4
kernel: Hardware name: Dell Inc. OptiPlex 780 /0V4W66, BIOS A05 08/11/2010
kernel: task: ffff880112d30050 ti: ffff8801124d4000 task.ti: ffff8801124d4000
kernel: RIP: 0010:[<ffffffffa00db5ae>] [<ffffffffa00db5ae>] ext3_orphan_add+0x6a/0x1eb [ext3]
kernel: RSP: 0018:ffff8801124d5cc8  EFLAGS: 00010202
kernel: RAX: 0000000000000000 RBX: ffff880111510128 RCX: ffff8801114683a0
kernel: RDX: 0000000000000000 RSI: ffff880111510128 RDI: ffff88010fcf65a8
kernel: RBP: ffff8801124d5d18 R08: 0080000000000000 R09: ffffffffa00d3b7f
kernel: R10: ffff8801114683a0 R11: ffff8801032a2558 R12: 0000000000000000
kernel: R13: ffff88010fcf6800 R14: ffff8801032a2558 R15: ffff8801115100d8
kernel: FS:  00007f5d172b5700(0000) GS:ffff880117c00000(0000) knlGS:0000000000000000
kernel: CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
kernel: CR2: 00007f5d16df15d0 CR3: 0000000110b1d000 CR4: 00000000000407f0
kernel: Stack:
kernel: 000000000000000c ffff8801048a7dc8 ffff8801114685a8 ffffffffa00b80d7
kernel: ffff8801124d5e38 ffff8801032a2558 ffff88010ce24d68 0000000000000000
kernel: ffff88011146b300 ffff8801124d5d44 ffff8801124d5d78 ffffffffa00db7e1
kernel: Call Trace:
kernel: [<ffffffffa00b80d7>] ? journal_start+0x8c/0xbd [jbd]
kernel: [<ffffffffa00db7e1>] ext3_tmpfile+0xb2/0x13b [ext3]
kernel: [<ffffffff821076f8>] path_openat+0x11f/0x5e7
kernel: [<ffffffff821c86b4>] ? list_del+0x11/0x30
kernel: [<ffffffff82065fa2>] ?  __dequeue_entity+0x33/0x38
kernel: [<ffffffff82107cd5>] do_filp_open+0x3f/0x8d
kernel: [<ffffffff82112532>] ? __alloc_fd+0x50/0x102
kernel: [<ffffffff820f9296>] do_sys_open+0x13b/0x1cd
kernel: [<ffffffff820f935c>] SyS_open+0x1e/0x20
kernel: [<ffffffff82398c02>] system_call_fastpath+0x16/0x1b
kernel: Code: 39 c7 0f 85 67 01 00 00 0f b7 03 25 00 f0 00 00 3d 00 40 00 00 74 18 3d 00 80 00 00 74 11 3d 00 a0 00 00 74 0a 83 7b 48 00 74 04 <0f> 0b eb fe 49 8b 85 50 03 00 00 4c 89 f6 48 c7 c7 c0 99 0e a0
kernel: RIP  [<ffffffffa00db5ae>] ext3_orphan_add+0x6a/0x1eb [ext3]
kernel: RSP <ffff8801124d5cc8>

Here we couldn't call clear_nlink() directly because in d_tmpfile() we
will call inode_dec_link_count() to decrease ->i_nlink.  So this commit
tries to call d_tmpfile() before ext4_orphan_add() to fix this problem.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>

When we try to open a file with O_TMPFILE flag, we will trigger a bug.
The root cause is that in ext4_orphan_add() we check ->i_nlink == 0 and
this check always fails because we set ->i_nlink = 1 in
inode_init_always().  We can use the following program to trigger it:

int main(int argc, char *argv[])
{
	int fd;

	fd = open(argv[1], O_TMPFILE, 0666);
	if (fd < 0) {
		perror("open ");
		return -1;
	}
	close(fd);
	return 0;
}

The oops message looks like this:

kernel BUG at fs/ext4/namei.c:2572!
invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
Modules linked in: dlci bridge stp hidp cmtp kernelcapi l2tp_ppp l2tp_netlink l2tp_core sctp libcrc32c rfcomm tun fuse nfnetli
nk can_raw ipt_ULOG can_bcm x25 scsi_transport_iscsi ipx p8023 p8022 appletalk phonet psnap vmw_vsock_vmci_transport af_key vmw_vmci rose vsock atm can netrom ax25 af_rxrpc ir
da pppoe pppox ppp_generic slhc bluetooth nfc rfkill rds caif_socket caif crc_ccitt af_802154 llc2 llc snd_hda_codec_realtek snd_hda_intel snd_hda_codec serio_raw snd_pcm pcsp
kr edac_core snd_page_alloc snd_timer snd soundcore r8169 mii sr_mod cdrom pata_atiixp radeon backlight drm_kms_helper ttm
CPU: 1 PID: 1812571 Comm: trinity-child2 Not tainted 3.11.0-rc1+ #12
Hardware name: Gigabyte Technology Co., Ltd. GA-MA78GM-S2H/GA-MA78GM-S2H, BIOS F12a 04/23/2010
task: ffff88007dfe69a0 ti: ffff88010f7b6000 task.ti: ffff88010f7b6000
RIP: 0010:[<ffffffff8125ce69>]  [<ffffffff8125ce69>] ext4_orphan_add+0x299/0x2b0
RSP: 0018:ffff88010f7b7cf8  EFLAGS: 00010202
RAX: 0000000000000000 RBX: ffff8800966d3020 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff88007dfe70b8 RDI: 0000000000000001
RBP: ffff88010f7b7d40 R08: ffff880126a3c4e0 R09: ffff88010f7b7ca0
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801271fd668
R13: ffff8800966d2f78 R14: ffff88011d7089f0 R15: ffff88007dfe69a0
FS:  00007f70441a3740(0000) GS:ffff88012a800000(0000) knlGS:00000000f77c96c0
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000002834000 CR3: 0000000107964000 CR4: 00000000000007e0
DR0: 0000000000780000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600
Stack:
 0000000000002000 00000020810b6dde 0000000000000000 ffff88011d46db00
 ffff8800966d3020 ffff88011d7089f0 ffff88009c7f4c10 ffff88010f7b7f2c
 ffff88007dfe69a0 ffff88010f7b7da8 ffffffff8125cfac ffff880100000004
Call Trace:
 [<ffffffff8125cfac>] ext4_tmpfile+0x12c/0x180
 [<ffffffff811cba78>] path_openat+0x238/0x700
 [<ffffffff8100afc4>] ? native_sched_clock+0x24/0x80
 [<ffffffff811cc647>] do_filp_open+0x47/0xa0
 [<ffffffff811db73f>] ? __alloc_fd+0xaf/0x200
 [<ffffffff811ba2e4>] do_sys_open+0x124/0x210
 [<ffffffff81010725>] ? syscall_trace_enter+0x25/0x290
 [<ffffffff811ba3ee>] SyS_open+0x1e/0x20
 [<ffffffff816ca8d4>] tracesys+0xdd/0xe2
 [<ffffffff81001001>] ? start_thread_common.constprop.6+0x1/0xa0
Code: 04 00 00 00 89 04 24 31 c0 e8 c4 77 04 00 e9 43 fe ff ff 66 25 00 d0 66 3d 00 80 0f 84 0e fe ff ff 83 7b 48 00 0f 84 04 fe ff ff <0f> 0b 49 8b 8c 24 50 07 00 00 e9 88 fe ff ff 0f 1f 84 00 00 00

Here we couldn't call clear_nlink() directly because in d_tmpfile() we
will call inode_dec_link_count() to decrease ->i_nlink.  So this commit
tries to call d_tmpfile() before ext4_orphan_add() to fix this problem.
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Tested-by: Darrick J. Wong <darrick.wong@oracle.com>
Tested-by: Dave Jones <davej@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>

Pull staging tree fixes from Greg KH:
 "Here are a few iio driver fixes for 3.11-rc2.  They are still spread
  across drivers/iio and drivers/staging/iio so they are coming in
  through this tree.

  I've also removed the drivers/staging/csr/ driver as the developers
  who originally sent it to me have moved on to other companies, and CSR
  still will not send us the specs for the device, making the driver
  pretty much obsolete and impossible to fix up.  Deleting it now
  prevents people from sending in lots of tiny codingsyle fixes that
  will never go anywhere.

  It also helps to offset the large lustre filesystem merge that
  happened in 3.11-rc1 in the overall 3.11.0 diffstat.  :)"

* tag 'staging-3.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: csr: remove driver
  iio: lps331ap: Fix wrong in_pressure_scale output value
  iio staging: fix lis3l02dq, read error handling
  staging:iio:ad7291: add missing .driver_module to struct iio_info
  iio: ti_am335x_adc: add missing .driver_module to struct iio_info
  iio: mxs-lradc: Remove useless check in read_raw
  iio: mxs-lradc: Fix misuse of iio->trig
  iio: inkern: fix iio_convert_raw_to_processed_unlocked
  iio: Fix iio_channel_has_info
  iio:trigger: device_unregister->device_del to avoid double free
  iio: dac: ad7303: fix error return code in ad7303_probe()

of_property_read_u32 return 0 on success. The check was using a ! to
return error. Fix the if condition.
Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Pankaj Jangra  <jangra.pankaj9@gmail.com>
Cc: "Bird, Tim" <Tim.Bird@sonymobile.com>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Pull vfs fixes from Al Viro:
 "The sget() one is a long-standing bug and will need to go into -stable
  (in fact, it had been originally caught in RHEL6), the other two are
  3.11-only"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  vfs: constify dentry parameter in d_count()
  livelock avoidance in sget()
  allow O_TMPFILE to work with O_WRONLY

Pull ext4 bugfixes from Ted Ts'o:
 "Fixes for 3.11-rc2, sent at 5pm, in the professoinal style.  :-)"

I'm not sure I like this new level of "professionalism".
9-5, people, 9-5.

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: call ext4_es_lru_add() after handling cache miss
  ext4: yield during large unlinks
  ext4: make the extent_status code more robust against ENOMEM failures
  ext4: simplify calculation of blocks to free on error
  ext4: fix error handling in ext4_ext_truncate()

Pull NFS client bugfixes from Trond Myklebust:
 - Fix a regression against NFSv4 FreeBSD servers when creating a new
   file
 - Fix another regression in rpc_client_register()

* tag 'nfs-for-3.11-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFSv4: Fix a regression against the FreeBSD server
  SUNRPC: Fix another issue with rpc_client_register()

Pull btrfs fixes from Josef Bacik:
 "I'm playing the role of Chris Mason this week while he's on vacation.
  There are a few critical fixes for btrfs here, all regressions and
  have been tested well"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/josef/btrfs-next:
  Btrfs: fix wrong write offset when replacing a device
  Btrfs: re-add root to dead root list if we stop dropping it
  Btrfs: fix lock leak when resuming snapshot deletion
  Btrfs: update drop progress before stopping snapshot dropping

The OMAP GPIO driver check if the chip has an associated
Device Tree node using the struct gpio_chip of_node member.

But this is only build if CONFIG_OF_GPIO is defined which
leads to the following error when using omap1_defconfig:

linux/drivers/gpio/gpio-omap.c: In function 'omap_gpio_chip_init':
linux/drivers/gpio/gpio-omap.c:1080:17: error: 'struct gpio_chip' has no member named 'of_node'
linux/drivers/gpio/gpio-omap.c: In function 'omap_gpio_irq_map':
linux/drivers/gpio/gpio-omap.c:1116:16: error: 'struct gpio_chip' has no member named 'of_node'
Reported-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

When an OMAP GPIO is used as an IRQ line, a call to gpio_request()
has to be made to initialize the OMAP GPIO bank before a driver
request the IRQ. Otherwise the call to request_irq() fails.

Drives should not be aware of this neither care wether an IRQ line
is a GPIO or not. They should just request the IRQ and this has to
be handled by the irq_chip driver.

With the current OMAP GPIO DT binding, if we define:

    gpio6: gpio@49058000 {
    	   compatible = "ti,omap3-gpio";
	   reg = <0x49058000 0x200>;
	   interrupts = <34>;
	   ti,hwmods = "gpio6";
	   gpio-controller;
	   #gpio-cells = <2>;
	   interrupt-controller;
	   #interrupt-cells = <2>;
    };

	   interrupt-parent = <&gpio6>;
           interrupts = <16 8>;

The GPIO is correctly mapped as an IRQ but a call to gpio_request()
is never made. Since a call to the custom IRQ domain .map function
handler is made for each GPIO used as an IRQ, the GPIO can be setup
and configured as input there automatically.

Changes since v3:
  - Use bank->chip.of_node instead of_have_populated_dt() to check
    DT or legacy boot as suggested by Jean-Christophe PLAGNIOL-VILLARD
  - Add a comment that this is just a temporary solution until and
    that it has to be removed once is handled by the IRQ core.

Changes since v2:
 - Only make the call to gpio_request_one() conditional in the DT
   case as suggested by Grant Likely.

Changes since v1:
  - Split the irq domain mapping function handler and the GPIO
    request in two different patches.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

When a GPIO is defined as an interrupt line using Device
Tree, a call to irq_create_of_mapping() is made that calls
irq_create_mapping(). So, is not necessary to do the mapping
for all OMAP GPIO lines and explicitly call irq_create_mapping()
on the driver probe() when booting with Device Tree.

Add a custom IRQ domain .map function handler that will be
called by irq_create_mapping() to map the GPIO lines used as IRQ.
This also allows to execute needed setup code such as configuring
a GPIO as input and enabling the GPIO bank.

Changes since v3:
  - Use bank->chip.of_node instead of_have_populated_dt() to check
    DT or legacy boot as suggested by Jean-Christophe PLAGNIOL-VILLARD

Changes since v2:
  - Unconditionally do the IRQ setup in the .map() function and
    only call irq_create_mapping() in the gpio chip init to avoid
    code duplication as suggested by Grant Likely.

Changes since v1:
  - Split the addition of the .map function handler and the
    automatic gpio request in two different patches.
  - Add GPIO IRQ setup logic to the irq domain mapping function.
  - Only call irq_create_mapping for every GPIO on legacy boot.
  - Only setup a GPIO IRQ on the .map function for DeviceTree boot.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

In theory, the different register blocks were meant to be only ever
touched when holding either the struct_mutex, mode_config.lock or even a
specific localised lock. This does not seem to be the case, and the
hardware reacts extremely badly if we attempt to concurrently access two
registers within the same cacheline.

The HSD suggests that we only need to do this workaround for display
range registers. However, upon review we need to serialize the multiple
stages in our register write functions - if only for preemption
protection.

Irrespective of the hardware requirements, the current io functions are
a little too loose with respect to the combination of pre- and
post-condition testing that we do in conjunction with the actual io. As
a result, we may be pre-empted and generate both false-postive and
false-negative errors.

Note well that this is a "90%" solution, there remains a few direct
users of ioread/iowrite which will be fixed up in the next few patches.
Since they are more invasive and that this simple change will prevent
almost all lockups on Haswell, we kept this patch simple to facilitate
backporting to stable.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=63914Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=47941
BugLink: https://bugs.launchpad.net/bugs/1163720
BugLink: https://bugs.launchpad.net/bugs/1162026

Some machines suffer from non-functional backlight controls if
BLM_PCH_PWM_ENABLE is set, so provide a quirk to avoid doing so.
Apply this quirk to Dell XPS 13 models.
Tested-by: Eric Griffith <EGriffith92@gmail.com>
Tested-by: Kent Baxley <kent.baxley@canonical.com>
Cc: <stable@vger.kernel.org> # v3.8+
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>