- 17 Jun, 2012 11 commits
-
-
Borislav Petkov authored
commit f227d430 upstream. Currently, the APIC LVT interrupt for error thresholding is implicitly enabled. However, there are models in the F15h range which do not enable it. Make the code machinery which sets up the APIC interrupt support an optional setting and add an ->interrupt_capable member to the bank representation mirroring that capability and enable the interrupt offset programming only if it is true. Simplify code and fixup comment style while at it. Signed-off-by:
Borislav Petkov <borislav.petkov@amd.com> Cc: Robert Richter <robert.richter@amd.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Cliff Wickman authored
commit d5d2d2ee upstream. The SGI Altix UV2 BAU (Broadcast Assist Unit) as used for tlb-shootdown (selective broadcast mode) always uses UV2 broadcast descriptor format. There is no need to clear the 'legacy' (UV1) mode, because the hardware always uses UV2 mode for selective broadcast. But the BIOS uses general broadcast and legacy mode, and the hardware pays attention to the legacy mode bit for general broadcast. So the kernel must not clear that mode bit. Signed-off-by:
Cliff Wickman <cpw@sgi.com> Link: http://lkml.kernel.org/r/E1SccoO-0002Lh-Cb@eag09.americas.sgi.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Theodore Ts'o authored
commit b0dd6b70 upstream. Ext3 filesystems that are converted to use as many ext4 file system features as possible will enable uninit_bg to speed up e2fsck times. These file systems will have a native ext3 layout of inode tables and block allocation bitmaps (as opposed to ext4's flex_bg layout). Unfortunately, in these cases, when first allocating a block in an uninitialized block group, ext4 would incorrectly calculate the number of free blocks in that block group, and then errorneously report that the file system was corrupt: EXT4-fs error (device vdd): ext4_mb_generate_buddy:741: group 30, 32254 clusters in bitmap, 32258 in gd This problem can be reproduced via: mke2fs -q -t ext4 -O ^flex_bg /dev/vdd 5g mount -t ext4 /dev/vdd /mnt fallocate -l 4600m /mnt/test The problem was caused by a bone headed mistake in the check to see if a particular metadata block was part of the block group. Many thanks to Kees Cook for finding and bisecting the buggy commit which introduced this bug (commit fd034a84, present since v3.2). Reported-by:
Sander Eikelenboom <linux@eikelenboom.it> Reported-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Tested-by:
-
John Stultz authored
commit fad0c66c upstream. Commit 6b43ae8a (ntp: Fix leap-second hrtimer livelock) broke the leapsecond update of CLOCK_MONOTONIC. The missing leapsecond update to wall_to_monotonic causes discontinuities in CLOCK_MONOTONIC. Adjust wall_to_monotonic when NTP inserted a leapsecond. Reported-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
John Stultz <john.stultz@linaro.org> Tested-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Rusty Russell authored
commit ae82fdb1 upstream. Commit 026cee00 "params: <level>_initcall-like kernel parameters" set old-style module parameters to level 0. And we call those level 0 calls where we used to, early in start_kernel(). We also loop through the initcall levels and call the levelled module_params before the corresponding initcall. Unfortunately level 0 is early_init(), so we call the standard module_param calls twice. (Turns out most things don't care, but at least ubi.mtd does). Change the level to -1 for standard module_param calls. Reported-by:
Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Steffen Rumler authored
commit 3c752965 upstream. This fixes a problem which can causes kernel oopses while loading a kernel module. According to the PowerPC EABI specification, GPR r11 is assigned the dedicated function to point to the previous stack frame. In the powerpc-specific kernel module loader, do_plt_call() (in arch/powerpc/kernel/module_32.c), GPR r11 is also used to generate trampoline code. This combination crashes the kernel, in the case where the compiler chooses to use a helper function for saving GPRs on entry, and the module loader has placed the .init.text section far away from the .text section, meaning that it has to generate a trampoline for functions in the .init.text section to call the GPR save helper. Because the trampoline trashes r11, references to the stack frame using r11 can cause an oops. The fix just uses GPR r12 instead of GPR r11 for generating the trampoline code. According to the statements from Freescale, this is safe from an EABI perspective. I've tested the fix for kernel 2.6.33 on MPC8541. Signed-off-by:
Steffen Rumler <steffen.rumler.ext@nsn.com> [paulus@samba.org: reworded the description] Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Paul Mackerras authored
commit 860aed25 upstream. This reverts 68568add ("powerpc/time: Remove unnecessary sanity check of decrementer expiration"). We do need to check whether we have reached the expiration time of the next event, because we sometimes get an early decrementer interrupt, most notably when we set the decrementer to 1 in arch_irq_work_raise(). The effect of not having the sanity check is that if timer_interrupt() gets called early, we leave the decrementer set to its maximum value, which means we then don't get any more decrementer interrupts for about 4 seconds (or longer, depending on timebase frequency). I saw these pauses as a consequence of getting a stray hypervisor decrementer interrupt left over from exiting a KVM guest. This isn't quite a straight revert because of changes to the surrounding code, but it restores the same algorithm as was previously used. Acked-by:
Anton Blanchard <anton@samba.org> Acked-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Roland Dreier authored
commit cbf8ae32 upstream. The memory the parameter __key points to is used as an iterator in btree_get_prev(), so if we save off a bkey() pointer in retry_key and then assign that to __key, we'll end up corrupting the btree internals when we do eg longcpy(__key, bkey(geo, node, i), geo->keylen); to return the key value. What we should do instead is use longcpy() to copy the key value that retry_key points to __key. This can cause a btree to get corrupted by seemingly read-only operations such as btree_for_each_safe. [akpm@linux-foundation.org: avoid the double longcpy()] Signed-off-by:
Roland Dreier <roland@purestorage.com> Acked-by:
Joern Engel <joern@logfs.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Eugeni Dodonov authored
commit 67384fe3 upstream. This seems to come on Gigabyte H55M-S2V and was discovered through the https://bugs.freedesktop.org/show_bug.cgi?id=50381 debugging. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50381Signed-off-by:
Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Chris Wilson authored
commit c3b20037 upstream. When we reset the ring control registers, including the HEAD and TAIL of the ring, we also need to reset associated state. In this instance, we were failing to reset the cached value of ring->last_retired_head and so upon the first request for more space following a resume would potentially (depending on a narrow race window) believe that the HEAD had advanced much further than reality. This is a regression from: commit a71d8d94 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Feb 15 11:25:36 2012 +0000 drm/i915: Record the tail at each request and use it to estimate the head Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Ben Skeggs authored
commit a6a17859 upstream. Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by:
-
- 09 Jun, 2012 29 commits
-
-
Greg Kroah-Hartman authored
-
Tao Ma authored
commit b22b1f17 upstream. Commit 79906964 uses the ext4_{set,clear}_inode_flags() functions to change the i_flags automatically but fails to remove the error setting of i_flags. So we still have the problem of trashing state flags. Fix this by removing the assignment. Signed-off-by:
Tao Ma <boyu.mt@taobao.com> Signed-off-by:
-
maximilian attems authored
commit 98e4cff7 upstream. Fixes klibc build on ia64 after 85f8f775. Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
maximilian attems <max@stro.at> Signed-off-by:
Tony Luck <tony.luck@intel.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Daniel Vetter authored
commit 6cb49835 upstream. We have one bug report from a validation team that we get the eDP panel sequencing still somewhat wrong: We need to enable VDD while switching off the panel and backlight. Unfortunately that reporter seems to have fallen off the earth :( For another reporter this actually fixes a black panel issue because without this the backlight/panel gets confused and doesn't light up again. v2: I've forgotten to remove the vdd_off call in panel_off which is now bogus. This essentially reverts commit 17038de5 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Mon Apr 16 22:43:42 2012 +0100 drm/i915/dp: Flush any outstanding work to turn the VDD off v3: the current panel_off code forces off the vdd power, too. Which is bogus and resulted in some funny warnings later on when we've tried to do aux channel communications with just the vdd forced on. Fix this, too. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=46312 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43163Tested-by:
Vincent Frentzel <zcecc22@gmail.com> Reviewed-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by:
-
Chris Wilson authored
commit 17038de5 upstream. As we may kick off a delayed workqueue task to switch of the VDD lines, we need to complete that task prior to turning off the panel (which itself depends upon VDD being off). v2: Don't cancel the outstanding work as this may trigger a deadlock Signed-off-by:
-
Jesse Barnes authored
commit 89ba829e upstream. Media turbo requests can either use RPVSWREQ or RPNSWREQ to indicate what the interrupt handler should do. Since we only deal with the latter in our turbo code, make the media engine use that for turbo requests. Tested-by:
Joe Bloggsian <joebloggsian@gmail.com> Signed-off-by:
-
Grazvydas Ignotas authored
commit f380f2c4 upstream. This driver disables interrupt just after requesting it and enables it later, after interface is up. However currently there is a time window between request_irq() and disable_irq() where if interrupt arrives, the driver oopses because it's not yet ready to process it. This can be reproduced by inserting the module, associating and removing the module multiple times. Eliminate this race by setting IRQF_NOAUTOEN flag before request_irq(). Signed-off-by:
Grazvydas Ignotas <notasas@gmail.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
NeilBrown authored
commit aba336bd upstream. The new merge_bvec_fn which calls the corresponding function in subsidiary devices requires that mddev->merge_check_needed be set if any child has a merge_bvec_fn. However were were only setting that when a device was hot-added, not when a device was present from the start. This bug was introduced in 3.4 so patch is suitable for 3.4.y kernels. However that are conflicts in raid10.c so a separate patch will be needed for 3.4.y. Reported-by:
Sebastian Riemer <sebastian.riemer@profitbricks.com> Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Linus Torvalds authored
commit 0640113b upstream. Cyrill Gorcunov reports that I broke the fdinfo files with commit 30a08bf2 ("proc: move fd symlink i_mode calculations into tid_fd_revalidate()"), and he's quite right. The tid_fd_revalidate() function is not just used for the <tid>/fd symlinks, it's also used for the <tid>/fdinfo/<fd> files, and the permission model for those are different. So do the dynamic symlink permission handling just for symlinks, making the fdinfo files once more appear as the proper regular files they are. Of course, Al Viro argued (probably correctly) that we shouldn't do the symlink permission games at all, and make the symlinks always just be the normal 'lrwxrwxrwx'. That would have avoided this issue too, but since somebody noticed that the permissions had changed (which was the reason for that original commit 30a08bf2 in the first place), people do apparently use this feature. [ Basically, you can use the symlink permission data as a cheap "fdinfo" replacement, since you see whether the file is open for reading and/or writing by just looking at st_mode of the symlink. So the feature does make sense, even if the pain it has caused means we probably shouldn't have done it to begin with. ] Reported-and-tested-by:
Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
-
Andy Whitcroft authored
commit c5971456 upstream. We only need to regenerate the sysfs files when the capacity units change, avoid the update otherwise. The origin of this issue is dates way back to 2.6.38: da8aeb92 (ACPI / Battery: Update information on info notification and resume) Signed-off-by:
Andy Whitcroft <apw@canonical.com> Tested-by:
Ralf Jung <post@ralfj.de> Signed-off-by:
Len Brown <len.brown@intel.com> Signed-off-by:
-
Joerg Roedel authored
commit eee53537 upstream. In the error path of the ppr_notifer it can happen that the iommu->lock is taken recursivly. This patch fixes the problem by releasing the iommu->lock before any notifier is invoked. This also requires to move the erratum workaround for the ppr-log (interrupt may be faster than data in the log) one function up. Signed-off-by:
Joerg Roedel <joerg.roedel@amd.com> Signed-off-by:
-
Joerg Roedel authored
commit c1bf94ec upstream. At some point pci_get_bus_and_slot started to enable interrupts. Since this function is used in the amd_iommu_resume path it will enable interrupts on resume which causes a warning. The fix will use a cached pointer to the root-bridge to re-enable the IOMMU in case the BIOS is broken. Signed-off-by:
-
Alex Deucher authored
commit 7aaa61b3 upstream. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Alex Deucher authored
commit a2bef8ce upstream. Signed-off-by:
-
Alex Deucher authored
commit 4a6991cc upstream. Signed-off-by:
-
Alex Deucher authored
commit d430f7db upstream. Signed-off-by:
-
Christian König authored
commit bb409155 upstream. Locking mutex in different orders just screams for deadlocks, and some testing showed that it is actually quite easy to trigger them. Signed-off-by:
Christian König <deathsimple@vodafone.de> Reviewed-by:
Jerome Glisse <jglisse@redhat.com> Signed-off-by:
-
Rafał Miłecki authored
commit 0aecb5a4 upstream. This is based on info released by AMD, should allow using audio in much more cases. Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Reviewed-by:
-
Konstantin Khlebnikov authored
commit fffaee36 upstream. This patch fixes bug in macro radix_tree_for_each_contig(). If radix_tree_next_slot() sees NULL in next slot it returns NULL, but following radix_tree_next_chunk() switches iterating into next chunk. As result iterating becomes non-contiguous and breaks vfs "splice" and all its users. Signed-off-by:
Konstantin Khlebnikov <khlebnikov@openvz.org> Reported-and-bisected-by:
Hans de Bruin <jmdebruin@xmsnet.nl> Reported-and-bisected-by:
Ondrej Zary <linux@rainbow-software.org> Reported-bisected-and-tested-by:
Toralf Förster <toralf.foerster@gmx.de> Link: https://lkml.org/lkml/2012/6/5/64Signed-off-by:
-
Salman Qazi authored
commit 95599968 upstream. We can't have references held on pages in the s_buddy_cache while we are trying to truncate its pages and put the inode. All the pages must be gone before we reach clear_inode. This can only be gauranteed if we can prevent new users from grabbing references to s_buddy_cache's pages. The original bug can be reproduced and the bug fix can be verified by: while true; do mount -t ext4 /dev/ram0 /export/hda3/ram0; \ umount /export/hda3/ram0; done & while true; do cat /proc/fs/ext4/ram0/mb_groups; done Signed-off-by:
Salman Qazi <sqazi@google.com> Signed-off-by:
-
Salman Qazi authored
commit 02b78310 upstream. ext4_free_blocks fails to pair an ext4_mb_load_buddy with a matching ext4_mb_unload_buddy when it fails a memory allocation. Signed-off-by:
-
Theodore Ts'o authored
commit 79906964 upstream. In commit 353eb83c we removed i_state_flags with 64-bit longs, But when handling the EXT4_IOC_SETFLAGS ioctl, we replace i_flags directly, which trashes the state flags which are stored in the high 32-bits of i_flags on 64-bit platforms. So use the the ext4_{set,clear}_inode_flags() functions which use atomic bit manipulation functions instead. Reported-by:
-
Theodore Ts'o authored
commit f3fc0210 upstream. The ext4_error() function is missing a call to save_error_info(). Since this is the function which marks the file system as containing an error, this oversight (which was introduced in 2.6.36) is quite significant, and should be backported to older stable kernels with high urgency. Reported-by:
Ken Sumrall <ksumrall@google.com> Signed-off-by:
-
Andreas Dilger authored
commit 7e936b73 upstream. A hard-linked directory to its parent can cause the VFS to deadlock, and is a sign of a corrupted file system. So detect this case in ext4_lookup(), before the rmdir() lockup scenario can take place. Signed-off-by:
Andreas Dilger <adilger@dilger.ca> Signed-off-by:
-
Haogang Chen authored
commit 967ac8af upstream. In alloc_flex_gd(), when flexbg_size is large, kmalloc size would overflow and flex_gd->groups would point to a buffer smaller than expected, causing OOB accesses when it is used. Note that in ext4_resize_fs(), flexbg_size is calculated using sbi->s_log_groups_per_flex, which is read from the disk and only bounded to [1, 31]. The patch returns NULL for too large flexbg_size. Reviewed-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
Haogang Chen <haogangchen@gmail.com> Signed-off-by:
-
Eric Sandeen authored
commit 7e84b621 upstream. If ext4_setup_super() fails i.e. due to a too-high revision, the error is logged in dmesg but the fs is not mounted RO as indicated. Tested by: # mkfs.ext4 -r 4 /dev/sdb6 # mount /dev/sdb6 /mnt/test # dmesg | grep "too high" [164919.759248] EXT4-fs (sdb6): revision level too high, forcing read-only mode # grep sdb6 /proc/mounts /dev/sdb6 /mnt/test2 ext4 rw,seclabel,relatime,data=ordered 0 0 Reviewed-by:
Andreas Dilger <adilger@whamcloud.com> Signed-off-by:
-
Dan Carpenter authored
commit bb3d132a upstream. The ext4_get_group_desc() function returns NULL on error, and ext4_free_inodes_count() function dereferences it without checking. There is a check on the next line, but it's too late. Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Benjamin Poirier authored
[ Upstream commit 91657eaf ] Corrects the function that determines the esp payload size. The calculations done in esp{4,6}_get_mtu() lead to overlength frames in transport mode for certain mtu values and suboptimal frames for others. According to what is done, mainly in esp{,6}_output() and tcp_mtu_to_mss(), net_header_len must be taken into account before doing the alignment calculation. Signed-off-by:
Benjamin Poirier <bpoirier@suse.de> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Felix Fietkau authored
[ Upstream commit 617c8c11 ] At the beginning of __skb_cow, headroom gets set to a minimum of NET_SKB_PAD. This causes unnecessary reallocations if the buffer was not cloned and the headroom is just below NET_SKB_PAD, but still more than the amount requested by the caller. This was showing up frequently in my tests on VLAN tx, where vlan_insert_tag calls skb_cow_head(skb, VLAN_HLEN). Locally generated packets should have enough headroom, and for forward paths, we already have NET_SKB_PAD bytes of headroom, so we don't need to add any extra space here. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
