An error occurred fetching the project authors.
- 03 Aug, 2007 1 commit
-
-
Magnus Damm authored
This patch fixes up the defconfig for various sh7751r based boards by updating them to the single cpu subtype CONFIG_CPU_SUBTYPE_SH7751R. The following sh4 boards are updated: hs7751rvoip, landisk, lboxre2, systemh, titan. The current defconfigs with two subtypes defined trigger a configuration bug which result in kernel configurations with missing board support code. We end up with kernels without board code and with generic machvec only. So we need this patch to make sure the board code gets compiled in. Signed-off-by:
Magnus Damm <damm@igel.co.jp> Signed-off-by:
Paul Mundt <lethal@linux-sh.org>
-
- 20 Jul, 2007 1 commit
-
-
Magnus Damm authored
This patch converts the cpu specific 7750 setup code to use the new intc controller. Many new vectors are added and multiple processor variants including 7091, 7750, 7750s, 7750r, 7751 and 7751r should all have the correct vectors hooked up. IRLM interrupts can be enabled using ipr_irq_enable_irlm() which now is marked as __init. Signed-off-by:
Magnus Damm <damm@igel.co.jp> Signed-off-by:
Paul Mundt <lethal@linux-sh.org>
-
- 11 Dec, 2006 1 commit
-
-
Paul Mundt authored
Get the landisk board building again.. Signed-off-by:
Paul Mundt <lethal@linux-sh.org>
-
- 03 Oct, 2006 1 commit
-
-
Paul Mundt authored
Sync up all of the defconfigs, and kill off a few old ones.. Signed-off-by:
Paul Mundt <lethal@linux-sh.org>
-
- 27 Sep, 2006 1 commit
-
-
kogiidena authored
This adds support for the I-O DATA Landisk. Signed-off-by:
kogiidena <kogiidena@eggplant.ddo.jp> Signed-off-by:
Paul Mundt <lethal@linux-sh.org>
-
- 26 Sep, 2006 1 commit
-
-
Olaf Hering authored
Update defconfig files after libata .config breakage sed -i 's/CONFIG_SCSI_SATA_/CONFIG_SATA_/;s/CONFIG_SCSI_SATA/CONFIG_ATA/' arch/powerpc/configs/*g Signed-off-by:
Olaf Hering <olaf@aepfle.de> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
- 10 Sep, 2006 1 commit
-
-
Paul Mackerras authored
Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
- 03 Jul, 2006 1 commit
-
-
Paul Mackerras authored
Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
- 15 Jun, 2006 1 commit
-
-
Anton Blanchard authored
pseries defconfig updates: - Enable jsm and re-enable qlogic FC drivers as modules. - Enable ocfs2, autofs4 and fuse filesystems as modules. - Enable Kprobes. - Enable ebus, binfmt_misc, sas attrs, md5 reshape, hvc rtas backend and some infiniband options. - Finally disable debug options: DEBUG_MUTEXES and DEBUG_STACK_USAGE. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
- 21 Apr, 2006 1 commit
-
-
Will Schmidt authored
Default choices for all. Signed-off-by:
Will Schmidt <willschm@us.ibm.com> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
- 24 Feb, 2006 1 commit
-
-
Olof Johansson authored
Update defconfigs for g5, pseries and generic ppc64. Default choices for everything, with the following exceptions: * Enable WINDFARM_PM112 on g5 and ppc64. * Increase CONFIG_NR_CPUS to 4 in g5_defconfig * CONFIG_TIGON3=y instead of =m in g5_defconfig Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
- 18 Jan, 2006 1 commit
-
-
Jesse Brandeburg authored
Adds the ability to disability packet split at compile time and use the legacy receive path on PCI express hardware. Made this a CONFIG option and modified the Kconfig, to reflect the new option. Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
John Ronciak <john.ronciak@intel.com> Signed-off-by:
Jeff Garzik <jgarzik@pobox.com>
-
- 20 Dec, 2005 1 commit
-
-
Paul Mackerras authored
Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
- 18 Nov, 2005 1 commit
-
-
Mike Kravetz authored
The config option SPAN_OTHER_NODES was created so that we could make pSeries numa layouts work within the DISCONTIG memory model. Now that DISCONTIG has been replaced by SPARSEMEM, we can eliminate this option. I'll be sending a separate patch to Andrew to remove the arch independent code as pSeries was the only arch that needed this. Signed-off-by:
Mike Kravetz <kravetz@us.ibm.com> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
- 16 Nov, 2005 1 commit
-
-
Benjamin Herrenschmidt authored
My patch moving ppc64 RTC to genrtc was supposed to update all defconfigs, but for some reason, the patch actually posted only had the pseries one... ouch. This patch properly updates all defconfigs. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
- 14 Nov, 2005 1 commit
-
-
Benjamin Herrenschmidt authored
This moves the rtas RTC callbacks to rtas-rtc.c in arch/powerpc/kernel, and kills the rest of arch/ppc64/kernel/rtc.c which was just a duplicate of the genrtc functionality. Also enable build of genrtc for CONFIG_PPC64 (it just works are we already have the required callbacks) and enable it in all defconfigs. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
- 03 Nov, 2005 1 commit
-
-
Michael Ellerman authored
Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by:
Michael Ellerman <michael@ellerman.id.au>
-
- 20 Oct, 2005 1 commit
-
-
Paul Mackerras authored
Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
- 30 Aug, 2005 1 commit
-
-
Anton Blanchard authored
While ppc64 has the CONFIG_HZ Kconfig option, it wasnt actually being used. Connect it up and set all platforms to 250Hz. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
- 08 Aug, 2005 1 commit
-
-
Paul Mackerras authored
Update the default/example configs for ppc64. Pretty boring... Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
- 27 Jul, 2005 1 commit
-
-
Olaf Hering authored
update defconfig, use new CONFIG_HZ and set it to 100 just for the kicks. Signed-off-by:
Olaf Hering <olh@suse.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
- 23 Jun, 2005 1 commit
-
-
Dave Hansen authored
This will at least suppress one prompt that users would have received the first time they compile with the new DISCONTIG arch option. They'll still get the "Memory Model" prompt, but 99% of them will have the default work there. Signed-off-by:
Dave Hansen <haveblue@us.ibm.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
- 14 Jun, 2005 1 commit
-
-
Paul Mackerras authored
Here is a patch to update the example configs in arch/ppc64/configs. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
- 16 Apr, 2005 1 commit
-
-
Linus Torvalds authored
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-