- 18 Apr, 2017 39 commits
-
-
Benjamin Herrenschmidt authored
We need to ensure the loads from the descriptor are done after the MMIO store clearing the interrupts has completed, otherwise we might still miss work. A read back from the MMIO register will "push" the posted store and ioread32 has a barrier on weakly aordered architectures that will order subsequent accesses. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Benjamin Herrenschmidt authored
Signed-off-by:
-
Benjamin Herrenschmidt authored
This uses the standard phy-mode property Signed-off-by:
-
Benjamin Herrenschmidt authored
Just call the interrupt handler with interrupts locally disabled Signed-off-by:
-
Benjamin Herrenschmidt authored
The chip supports HW vlan tag insertion and extraction. Add support for it. Signed-off-by:
-
Benjamin Herrenschmidt authored
This adds the ndo_set_rx_mode() callback to configure the multicast filters, promisc and allmulti options. Signed-off-by:
-
Benjamin Herrenschmidt authored
Hopefully my understanding of how the hardware works is correct, as the documentation isn't completely clear. So far I have seen no obvious issue. Pause seem to also work with NC-SI. Signed-off-by:
-
Benjamin Herrenschmidt authored
A non-wired up implementation accidentally made its way in a previous patch (Make ring sizes configurable via ethtool). This removes it and wires up the generic phy_ethtool_nway_reset instead. Signed-off-by:
-
David S. Miller authored
Markus Elfring says: ==================== Ethernet-Marvell: Fine-tuning for several function implementations Several update suggestions were taken into account from static source code analysis. ==================== Signed-off-by: -
Markus Elfring authored
A string which did not contain a data format specification should be put into a sequence. Thus use the corresponding function "seq_puts". This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
-
Markus Elfring authored
The script "checkpatch.pl" pointed information out like the following. Comparison to NULL could be written "!skge->mem". Thus fix the affected source code place. Signed-off-by:
-
Markus Elfring authored
A string which did not contain a data format specification should be put into a sequence. Thus use the corresponding function "seq_puts". This issue was detected by using the Coccinelle software. Signed-off-by:
-
Markus Elfring authored
MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The script “checkpatch.pl” pointed information out like the following. Comparison to NULL could be written … Thus fix the affected source code places. Signed-off-by:
-
Markus Elfring authored
Multiplications for the size determination of memory allocations indicated that array data structures should be processed. Thus use the corresponding function "kcalloc". This issue was detected by using the Coccinelle software. Signed-off-by:
-
Markus Elfring authored
The script "checkpatch.pl" pointed information out like the following. Comparison to NULL could be written "txq->descs". Thus fix the affected source code place. Signed-off-by:
-
Markus Elfring authored
Adjust jump labels according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
Adjust jump labels according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
Adjust jump labels according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
Adjust jump labels according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
Use the word "failed" in the string for three function calls. Signed-off-by:
-
Markus Elfring authored
Adjust jump labels according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
The script "checkpatch.pl" pointed out that labels should not be indented. Thus delete two horizontal tabs before the jump label "err_drop_frame" in the function "mvpp2_rx". Signed-off-by:
-
Markus Elfring authored
Replace the specification of two data structures by pointer dereferences as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
Replace the specification of data structures by references to a local variable as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer. Signed-off-by:
-
Markus Elfring authored
Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
Replace the specification of two data structures by pointer dereferences as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
* A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "kmalloc_array". This issue was detected by using the Coccinelle software. * Replace the specification of a data structure by a pointer dereference to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The script “checkpatch.pl” pointed information out like the following. Comparison to NULL could be written … Thus fix the affected source code places. Signed-off-by:
-
Markus Elfring authored
A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "kmalloc_array". This issue was detected by using the Coccinelle software. Signed-off-by:
-
Markus Elfring authored
Replace the specification of two data structures by pointer dereferences as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
* A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "devm_kmalloc_array". This issue was detected by using the Coccinelle software. * Replace the specification of a data type by a pointer dereference to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by:
-
Florian Westphal authored
commit 83e7e4ce ("mac80211: Use rhltable instead of rhashtable") removed the last user that made use of 'insecure_elasticity' parameter, i.e. the default of 16 is used everywhere. Replace it with a constant. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
David S. Miller authored
Xin Long says: ==================== sctp: add proper process for duplicated stream reconf requests Now sctp stream reconf will process a request again even if it's seqno is less than asoc->strreset_inseq. It may cause a replay attack. This patchset is to avoid it by add proper process for all duplicated stream reconf requests. ==================== Signed-off-by: -
Xin Long authored
This patch is to fix the replay attack issue for strreset asoc requests. When a duplicated strreset asoc request is received, reply it with bad seqno if it's seqno < asoc->strreset_inseq - 2, and reply it with the result saved in asoc if it's seqno >= asoc->strreset_inseq - 2. But note that if the result saved in asoc is performed, the sender's next tsn and receiver's next tsn for the response chunk should be set. It's safe to get them from asoc. Because if it's changed, which means the peer has received the response already, the new response with wrong tsn won't be accepted by peer. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Xin Long authored
This patch is to fix the replay attack issue for strreset and addstrm in requests. When a duplicated strreset in or addstrm in request is received, reply it with bad seqno if it's seqno < asoc->strreset_inseq - 2, and reply it with the result saved in asoc if it's seqno >= asoc->strreset_inseq - 2. For strreset in or addstrm in request, if the receiver side processes it successfully, a strreset out or addstrm out request(as a response for that request) will be sent back to peer. reconf_time will retransmit the out request even if it's lost. So when receiving a duplicated strreset in or addstrm in request and it's result was performed, it shouldn't reply this request, but drop it instead. Signed-off-by:
-
Xin Long authored
Now sctp stream reconf will process a request again even if it's seqno is less than asoc->strreset_inseq. If one request has been done successfully and some data chunks have been accepted and then a duplicated strreset out request comes, the streamin's ssn will be cleared. It will cause that stream will never receive chunks any more because of unsynchronized ssn. It allows a replay attack. A similar issue also exists when processing addstrm out requests. It will cause more extra streams being added. This patch is to fix it by saving the last 2 results into asoc. When a duplicated strreset out or addstrm out request is received, reply it with bad seqno if it's seqno < asoc->strreset_inseq - 2, and reply it with the result saved in asoc if it's seqno >= asoc->strreset_inseq - 2. Note that it saves last 2 results instead of only last 1 result, because two requests can be sent together in one chunk. And note that when receiving a duplicated request, the receiver side will still reply it even if the peer has received the response. It's safe, As the response will be dropped by the peer. Signed-off-by:
-
- 17 Apr, 2017 1 commit
-
-
Chonggang Li authored
Bonding driver changes the skb->dev to the bonding-master before passing the packet to stack for further processing. This, however does not make sense for the link-local packets and it loses "the link info" once its skb->dev is changed to bonding-master. This patch changes this behavior for link-local packets by not changing the skb->dev to the bonding-master and maintaining it as it is, i.e. the link on which the packet arrived. Signed-off-by:
Chonggang Li <chonggangli@google.com> Signed-off-by:
Mahesh Bandewar <maheshb@google.com> Signed-off-by:
Maciej Żenczykowski <maze@google.com> Signed-off-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
-
