- 03 Jul, 2018 8 commits
-
-
Colin Ian King authored
The variables val16, type, pci_dev and type are set but are never used hence they are redundant and can be removed. Cleans up clang warnings: warning: variable 'type' set but not used [-Wunused-but-set-variable] warning: variable 'val16' set but not used [-Wunused-but-set-variable] warning: variable 'pci_dev' set but not used [-Wunused-but-set-variable] warning: variable 'type' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nadav Amit authored
Philip Moltman is no longer a maintainer of the VMware balloon. Setting Nadav Amit as one instead. Reviewed-by: Xavier Deguillard <xdeguillard@vmware.com> Signed-off-by: Nadav Amit <namit@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nadav Amit authored
Removing the GPL wording and replace it with an SPDX tag. The immediate trigger for doing it now is the need to remove the list of maintainers from the source file, as the maintainer list changed. Reviewed-by: Xavier Deguillard <xdeguillard@vmware.com> Signed-off-by: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nadav Amit authored
Since commit 33d268ed ("VMware balloon: Do not limit the amount of frees and allocations in non-sleep mode."), the allocations are not increased, and therefore balloon inflation rate limiting is in practice broken. While we can restore rate limiting, in practice we see that it can result in adverse effect, as the hypervisor throttles down the VM if it does not respond well enough, or alternatively causes it to perform very poorly as the host swaps out the VM memory. Throttling the VM down can even have a cascading effect, in which the VM reclaims memory even slower and consequentially throttled down even further. We therefore remove all the rate limiting mechanisms, including the slow allocation cycles, as they are likely to do more harm than good. Fixes: 33d268ed ("VMware balloon: Do not limit the amount of frees and allocations in non-sleep mode.") Reviewed-by: Xavier Deguillard <xdeguillard@vmware.com> Signed-off-by: Nadav Amit <namit@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nadav Amit authored
Currently, when all modules, including VMCI and VMware balloon are built into the kernel, the initialization of the balloon happens before the VMCI is probed. As a result, the balloon fails to initialize the VMCI doorbell, which it uses to get asynchronous requests for balloon size changes. The problem can be seen in the logs, in the form of the following message: "vmw_balloon: failed to initialize vmci doorbell" The driver would work correctly but slightly less efficiently, probing for requests periodically. This patch changes the balloon to be initialized using late_initcall() instead of module_init() to address this issue. It does not address a situation in which VMCI is built as a module and the balloon is built into the kernel. Fixes: 48e3d668 ("VMware balloon: Enable notification via VMCI") Cc: stable@vger.kernel.org Reviewed-by: Xavier Deguillard <xdeguillard@vmware.com> Signed-off-by: Nadav Amit <namit@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nadav Amit authored
When vmballoon_vmci_init() sets a doorbell using VMCI_DOORBELL_SET, for some reason it does not consider the status and looks at the result. However, the hypervisor does not update the result - it updates the status. This might cause VMCI doorbell not to be enabled, resulting in degraded performance. Fixes: 48e3d668 ("VMware balloon: Enable notification via VMCI") Cc: stable@vger.kernel.org Reviewed-by: Xavier Deguillard <xdeguillard@vmware.com> Signed-off-by: Nadav Amit <namit@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nadav Amit authored
If the hypervisor sets 2MB batching is on, while batching is cleared, the balloon code breaks. In this case the legacy mechanism is used with 2MB page. The VM would report a 2MB page is ballooned, and the hypervisor would only take the first 4KB. While the hypervisor should not report such settings, make the code more robust by not enabling 2MB support without batching. Fixes: 365bd7ef ("VMware balloon: Support 2m page ballooning.") Cc: stable@vger.kernel.org Reviewed-by: Xavier Deguillard <xdeguillard@vmware.com> Signed-off-by: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nadav Amit authored
When balloon batching is not supported by the hypervisor, the guest frame number (GFN) must fit in 32-bit. However, due to a bug, this check was mistakenly ignored. In practice, when total RAM is greater than 16TB, the balloon does not work currently, making this bug unlikely to happen. Fixes: ef0f8f11 ("VMware balloon: partially inline vmballoon_reserve_page.") Cc: stable@vger.kernel.org Reviewed-by: Xavier Deguillard <xdeguillard@vmware.com> Signed-off-by: Nadav Amit <namit@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 28 Jun, 2018 8 commits
-
-
Johan Hovold authored
Add a "type" device attribute and a "GNSS_TYPE" uevent variable which can be used to determine the type of a GNSS receiver. The currently identified types reflect the protocol(s) supported by a receiver: "NMEA" NMEA 0183 "SiRF" SiRF Binary "UBX" UBX Note that both SiRF and UBX type receivers typically support a subset of NMEA 0183 with vendor extensions (e.g. to allow switching to the vendor protocol). Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
Add driver for serial-connected SiRFstar-based GNSS receivers. These devices typically boot into hibernate mode from which they can be woken using a pulse on the ON_OFF input pin. Once active, a pulse on the same ON_OFF pin is used to put the device back into hibernate mode. The current state can be determined by sampling the WAKEUP output. Hardware configurations where WAKEUP has been connected to ON_OFF (and where an initial WAKEUP pulse during boot is sufficient to have the device boot into active mode) are also supported. In this case, device power is managed using the main-supply regulator only. Note that configurations where WAKEUP is left not connected, so that the device power state can only indirectly be determined using the I/O interface, is currently not supported. It should be fairly straight-forward to extend the current implementation with such support however (and this this is the main reason for not using the generic serial implementation for this driver). Note that timepulse-support is left unimplemented. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
Add binding for SiRFstar-based GNSS receivers. Note that while four compatible-strings are initially added representing devices which differ in which I/O interfaces they support, they otherwise essentially share the same feature set. Pin and supply names vary slightly, as do some recommended timings. Note that the wakeup gpio is not intended to be used as a wakeup source, but rather to detect the current power state of the device (active or hibernate). Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
Add driver for serial-connected u-blox GNSS receivers. Note that the driver uses the generic GNSS serial implementation and therefore essentially only manages power abstracted into three power states: ACTIVE, STANDBY, and OFF. For u-blox receivers with a main supply and no enable-gpios, this simply means that the main supply is disabled in STANDBY and OFF (the optional backup supply is kept enabled while the driver is bound). Note that timepulse-support is not yet implemented. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
Add binding for u-blox GNSS receivers. Note that the u-blox product names encodes form factor (e.g. "neo"), chipset (e.g. "8") and variant (e.g. "q"), but that only formfactor and chipset is used for the compatible strings (for now). Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
Add a generic serial GNSS driver (library) which provides a common implementation for the gnss interface and power management (runtime and system suspend). This allows GNSS drivers for specific chip to be implemented by simply providing a set_power() callback to handle three states: ACTIVE, STANDBY and OFF. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
Describe generic properties for GNSS receivers. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
Add a new subsystem for GNSS (e.g. GPS) receivers. While GNSS receivers are typically accessed using a UART interface they often also support other I/O interfaces such as I2C, SPI and USB, while yet other devices use iomem or even some form of remote-processor messaging (rpmsg). The new GNSS subsystem abstracts the underlying interface and provides a new "gnss" class type, which exposes a character-device interface (e.g. /dev/gnss0) to user space. This allows GNSS receivers to have a representation in the Linux device model, something which is important not least for power management purposes. Note that the character-device interface provides raw access to whatever protocol the receiver is (currently) using, such as NMEA 0183, UBX or SiRF Binary. These protocols are expected to be continued to be handled by user space for the time being, even if some hybrid solutions are also conceivable (e.g. to have kernel drivers issue management commands). This will still allow for better platform integration by allowing GNSS devices and their resources (e.g. regulators and enable-gpios) to be described by firmware and managed by kernel drivers rather than platform-specific scripts and services. While the current interface is kept minimal, it could be extended using IOCTLs, sysfs or uevents as needs and proper abstraction levels are identified and determined (e.g. for device and feature identification). Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 24 Jun, 2018 13 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Thomas Gleixner: "A pile of perf updates: Kernel side: - Remove an incorrect warning in uprobe_init_insn() when insn_get_length() fails. The error return code is handled at the call site. - Move the inline keyword to the right place in the perf ringbuffer code to address a W=1 build warning. Tooling: perf stat: - Fix metric column header display alignment - Improve error messages for default attributes, providing better output for error in command line. - Add --interval-clear option, to provide a 'watch' like printing perf script: - Show hw-cache events too perf c2c: - Fix data dependency problem in layout of 'struct c2c_hist_entry' Core: - Do not blindly assume that 'struct perf_evsel' can be obtained via a straight forward container_of() as there are call sites which hand in a plain 'struct hist' which is not part of a container. - Fix error index in the PMU event parser, so that error messages can point to the problematic token" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Move the inline keyword at the beginning of the function declaration uprobes/x86: Remove incorrect WARN_ON() in uprobe_init_insn() perf script: Show hw-cache events perf c2c: Keep struct hist_entry at the end of struct c2c_hist_entry perf stat: Add event parsing error handling to add_default_attributes perf stat: Allow to specify specific metric column len perf stat: Fix metric column header display alignment perf stat: Use only color_fprintf call in print_metric_only perf stat: Add --interval-clear option perf tools: Fix error index for pmu event parser perf hists: Reimplement hists__has_callchains() perf hists browser gtk: Use hist_entry__has_callchains() perf hists: Make hist_entry__has_callchains() work with 'perf c2c' perf hists: Save the callchain_size in struct hist_entry
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull rseq fixes from Thomas Gleixer: "A pile of rseq related fixups: - Prevent infinite recursion when delivering SIGSEGV - Remove the abort of rseq critical section on fork() as syscalls inside rseq critical sections are explicitely forbidden. So no point in doing the abort on the child. - Align the rseq structure on 32 bytes in the ARM selftest code. - Fix file permissions of the test script" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rseq: Avoid infinite recursion when delivering SIGSEGV rseq/cleanup: Do not abort rseq c.s. in child on fork() rseq/selftests/arm: Align 'struct rseq_cs' on 32 bytes rseq/selftests: Make run_param_test.sh executable
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull EFI fixes from Thomas Gleixner: "Two fixlets for the EFI maze: - Properly zero variables to prevent an early boot hang on EFI mixed mode systems - Fix the fallout of merging the 32bit and 64bit variants of EFI PCI related code which ended up chosing the 32bit variant of the actual EFi call invocation which leads to failures on 64bit" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/x86: Fix incorrect invocation of PciIo->Attributes() efi/libstub/tpm: Initialize efi_physical_addr_t vars to zero for mixed mode
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull core fixes from Thomas Gleixner: "Two tiny fixes: - Add the missing machine_real_restart() to objtools noreturn list so it stops complaining - Fix a trivial comment typo" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: kernel.h: Fix a typo in comment objtool: Add machine_real_restart() to the noreturn list
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A set of fixes for x86: - Make Xen PV guest deal with speculative store bypass correctly - Address more fallout from the 5-Level pagetable handling. Undo an __initdata annotation to avoid section mismatch and malfunction when post init code would touch the freed variable. - Handle exception fixup in math_error() before calling notify_die(). The reverse call order incorrectly triggers notify_die() listeners for soemthing which is handled correctly at the site which issues the floating point instruction. - Fix an off by one in the LLC topology calculation on AMD - Handle non standard memory block sizes gracefully un UV platforms - Plug a memory leak in the microcode loader - Sanitize the purgatory build magic - Add the x86 specific device tree bindings directory to the x86 MAINTAINER file patterns" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Fix 'no5lvl' handling Revert "x86/mm: Mark __pgtable_l5_enabled __initdata" x86/CPU/AMD: Fix LLC ID bit-shift calculation MAINTAINERS: Add file patterns for x86 device tree bindings x86/microcode/intel: Fix memleak in save_microcode_patch() x86/platform/UV: Add kernel parameter to set memory block size x86/platform/UV: Use new set memory block size function x86/platform/UV: Add adjustable set memory block size function x86/build: Remove unnecessary preparation for purgatory Revert "kexec/purgatory: Add clean-up for purgatory directory" x86/xen: Add call of speculative_store_bypass_ht_init() to PV paths x86: Call fixup_exception() before notify_die() in math_error()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 pti fixes from Thomas Gleixner: "Two small updates for the speculative distractions: - Make it more clear to the compiler that array_index_mask_nospec() is not subject for optimizations. It's not perfect, but ... - Don't report XEN PV guests as vulnerable because their mitigation state depends on the hypervisor. Report unknown and refer to the hypervisor requirement" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/spectre_v1: Disable compiler optimizations over array_index_mask_nospec() x86/pti: Don't report XenPV as vulnerable
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixes from Thomas Gleixner: "A set of fixes and updates for the locking code: - Prevent lockdep from updating irq state within its own code and thereby confusing itself. - Buid fix for older GCCs which mistreat anonymous unions - Add a missing lockdep annotation in down_read_non_onwer() which causes up_read_non_owner() to emit a lockdep splat - Remove the custom alpha dec_and_lock() implementation which is incorrect in terms of ordering and use the generic one. The remaining two commits are not strictly fixes. They provide irqsave variants of atomic_dec_and_lock() and refcount_dec_and_lock(). These are required to merge the relevant updates and cleanups into different maintainer trees for 4.19, so routing them into mainline without actual users is the sanest approach. They should have been in -rc1, but last weekend I took the liberty to just avoid computers in order to regain some mental sanity" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/qspinlock: Fix build for anonymous union in older GCC compilers locking/lockdep: Do not record IRQ state within lockdep code locking/rwsem: Fix up_read_non_owner() warning with DEBUG_RWSEMS locking/refcounts: Implement refcount_dec_and_lock_irqsave() atomic: Add irqsave variant of atomic_dec_and_lock() alpha: Remove custom dec_and_lock() implementation
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull ras fixes from Thomas Gleixner: "A set of fixes for RAS/MCE: - Improve the error message when the kernel cannot recover from a MCE so the maximum amount of information gets provided. - Individually check MCE recovery features on SkyLake CPUs instead of assuming none when the CAPID0 register does not advertise the general ability for recovery. - Prevent MCE to output inconsistent messages which first show an error location and then claim that the source is unknown. - Prevent overwriting MCi_STATUS in the attempt to gather more information when a fatal MCE has alreay been detected. This leads to empty status values in the printout and failing to react promptly on the fatal event" * 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Fix incorrect "Machine check from unknown source" message x86/mce: Do not overwrite MCi_STATUS in mce_no_way_out() x86/mce: Check for alternate indication of machine check recovery on Skylake x86/mce: Improve error message when kernel cannot recover
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "A small set of fixes for time(r) related issues: - Fix a long standing conversion issue in jiffies_to_msecs() for odd HZ values like 1024 or 1200 which resulted in returning 0 for small jiffies values due to rounding down. - Use the proper CONFIG symbol in the new Y2038 safe compat code for posix-timers. Not yet a visible breakage, but this will immediately trigger when the architecture support for the new interfaces is merged. - Return an error code in the STM32 clocksource driver on failure instead of success. - Remove the redundant and stale irq disabled check in the posix cpu timer code. The check is at the wrong place anyway and lockdep already covers it via the sighand lock locking coverage" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time: Make sure jiffies_to_msecs() preserves non-zero time periods posix-timers: Fix nanosleep_copyout() for CONFIG_COMPAT_32BIT_TIME clocksource/drivers/stm32: Fix error return code posix-cpu-timers: Remove lockdep_assert_irqs_disabled()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "A set of fixes mostly for the ARM/GIC world: - Fix the MSI affinity handling in the ls-scfg irq chip driver so it updates and uses the effective affinity mask correctly - Prevent binding LPIs to offline CPUs and respect the Cavium erratum which requires that LPIs which belong to an offline NUMA node are not bound to a CPU on a different NUMA node. - Free only the amount of allocated interrupts in the GIC-V2M driver instead of trying to free log2(nrirqs). - Prevent emitting SYNC and VSYNC targetting non existing interrupt collections in the GIC-V3 ITS driver - Ensure that the GIV-V3 interrupt redistributor is correctly reprogrammed on CPU hotplug - Remove a stale unused helper function" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqdesc: Delete irq_desc_get_msi_desc() irqchip/gic-v3-its: Fix reprogramming of redistributors on CPU hotplug irqchip/gic-v3-its: Only emit VSYNC if targetting a valid collection irqchip/gic-v3-its: Only emit SYNC if targetting a valid collection irqchip/gic-v3-its: Don't bind LPI to unavailable NUMA node irqchip/gic-v2m: Fix SPI release on error path irqchip/ls-scfg-msi: Fix MSI affinity handling genirq/debugfs: Add missing IRQCHIP_SUPPORTS_LEVEL_MSI debug
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS fixes from Paul Burton: "A few MIPS fixes for 4.18: - a GPIO device name fix for a regression in v4.15-rc1. - an errata workaround for the BCM5300X platform. - a fix to ftrace function graph tracing, broken for a long time with the fix applying cleanly back as far as v3.17. - addition of read barriers to in{b,w,l,q}() functions, matching behavior of other architectures & mirroring the equivalent addition to read{b,w,l,q} in v4.17-rc2. Plus changes to wire up new syscalls introduced in the 4.18 cycle: - Restartable sequences support is added, including MIPS support in the selftests. - io_pgetevents is wired up" * tag 'mips_fixes_4.18_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: Wire up io_pgetevents syscall rseq/selftests: Implement MIPS support MIPS: Wire up the restartable sequences (rseq) syscall MIPS: Add syscall detection for restartable sequences MIPS: Add support for restartable sequences MIPS: io: Add barrier after register read in inX() mips: ftrace: fix static function graph tracing MIPS: BCM47XX: Enable 74K Core ExternalSync for PCIe erratum MIPS: pb44: Fix i2c-gpio GPIO descriptor table
-
Ard Biesheuvel authored
The following commit: 2c3625cb ("efi/x86: Fold __setup_efi_pci32() and __setup_efi_pci64() into one function") ... merged the two versions of __setup_efi_pciXX(), without taking into account that the 32-bit version used a rather dodgy trick to pass an immediate 0 constant as argument for a uint64_t parameter. The issue is caused by the fact that on x86, UEFI protocol method calls are redirected via struct efi_config::call(), which is a variadic function, and so the compiler has to infer the types of the parameters from the arguments rather than from the prototype. As the 32-bit x86 calling convention passes arguments via the stack, passing the unqualified constant 0 twice is the same as passing 0ULL, which is why the 32-bit code in __setup_efi_pci32() contained the following call: status = efi_early->call(pci->attributes, pci, EfiPciIoAttributeOperationGet, 0, 0, &attributes); to invoke this UEFI protocol method: typedef EFI_STATUS (EFIAPI *EFI_PCI_IO_PROTOCOL_ATTRIBUTES) ( IN EFI_PCI_IO_PROTOCOL *This, IN EFI_PCI_IO_PROTOCOL_ATTRIBUTE_OPERATION Operation, IN UINT64 Attributes, OUT UINT64 *Result OPTIONAL ); After the merge, we inadvertently ended up with this version for both 32-bit and 64-bit builds, breaking the latter. So replace the two zeroes with the explicitly typed constant 0ULL, which works as expected on both 32-bit and 64-bit builds. Wilfried tested the 64-bit build, and I checked the generated assembly of a 32-bit build with and without this patch, and they are identical. Reported-by: Wilfried Klaebe <linux-kernel@lebenslange-mailadresse.de> Tested-by: Wilfried Klaebe <linux-kernel@lebenslange-mailadresse.de> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: hdegoede@redhat.com Cc: linux-efi@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
- 23 Jun, 2018 11 commits
-
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - Further timeout fixes. We aren't quite there yet, so expect another round of fixes for that to completely close some of the IRQ vs completion races. (Christoph/Bart) - Set of NVMe fixes from the usual suspects, mostly error handling - Two off-by-one fixes (Dan) - Another bdi race fix (Jan) - Fix nbd reconfigure with NBD_DISCONNECT_ON_CLOSE (Doron) * tag 'for-linus-20180623' of git://git.kernel.dk/linux-block: blk-mq: Fix timeout handling in case the timeout handler returns BLK_EH_DONE bdi: Fix another oops in wb_workfn() lightnvm: Remove depends on HAS_DMA in case of platform dependency nvme-pci: limit max IO size and segments to avoid high order allocations nvme-pci: move nvme_kill_queues to nvme_remove_dead_ctrl nvme-fc: release io queues to allow fast fail nbd: Add the nbd NBD_DISCONNECT_ON_CLOSE config flag. block: sed-opal: Fix a couple off by one bugs blk-mq-debugfs: Off by one in blk_mq_rq_state_name() nvmet: reset keep alive timer in controller enable nvme-rdma: don't override opts->queue_size nvme-rdma: Fix command completion race at error recovery nvme-rdma: fix possible free of a non-allocated async event buffer nvme-rdma: fix possible double free condition when failing to create a controller Revert "block: Add warning for bi_next not NULL in bio_endio()" block: fix timeout changes for legacy request drivers
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: - Fix use after free in chtls - Fix RBP breakage in sha3 - Fix use after free in hwrng_unregister - Fix overread in morus640 - Move sleep out of kernel_neon in arm64/aes-blk * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: hwrng: core - Always drop the RNG in hwrng_unregister() crypto: morus640 - Fix out-of-bounds access crypto: don't optimize keccakf() crypto: arm64/aes-blk - fix and move skcipher_walk_done out of kernel_neon_begin, _end crypto: chtls - use after free in chtls_pt_recvmsg()
-
Linus Torvalds authored
Merge tag 'linux-kselftest-4.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: - fix new sparc64 adi driver test compile errors on non-sparc systems - fix config fragment for sync framework for improved test coverage - fix several tests to return correct Kselftest skip code * tag 'linux-kselftest-4.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: sparc64: Add missing SPDX License Identifiers selftests: sparc64: delete RUN_TESTS and EMIT_TESTS overrides selftests: sparc64: Fix to do nothing on non-sparc64 selftests: sync: add config fragment for testing sync framework selftests: vm: return Kselftest Skip code for skipped tests selftests: zram: return Kselftest Skip code for skipped tests selftests: user: return Kselftest Skip code for skipped tests selftests: sysctl: return Kselftest Skip code for skipped tests selftests: static_keys: return Kselftest Skip code for skipped tests selftests: pstore: return Kselftest Skip code for skipped tests
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: "This contains a few fixes and a clean up. - a bad merge caused an "endif" to go in the wrong place in scripts/Makefile.build - softirq tracing fix for tracing that corrupts lockdep and causes a false splat - histogram documentation typo fixes - fix a bad memory reference when passing in no filter to the filter code - simplify code by using the swap macro instead of open coding the swap" * tag 'trace-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix SKIP_STACK_VALIDATION=1 build due to bad merge with -mrecord-mcount tracing: Fix some errors in histogram documentation tracing: Use swap macro in update_max_tr softirq: Reorder trace_softirqs_on to prevent lockdep splat tracing: Check for no filter when processing event filters
-
Bart Van Assche authored
Make sure that RQF_TIMED_OUT is cleared when a request is reused after a block driver timeout handler has returned BLK_EH_DONE. Fixes: da661267 ("blk-mq: don't time out requests again that are in the timeout handler") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jianchao Wang <jianchao.w.wang@oracle.com> Cc: Andrew Randrianasulu <randrianasulu@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - a fix for hugetlb with 4K pages, broken by our recent changes for split PMD PTL. - set the correct assembler machine type on e500mc, needed since binutils 2.26 introduced two forms for the "wait" instruction. - a fix for potential missed TLB flushes with MADV_[FREE|DONTNEED] etc. and THP on Power9 Radix. - three fixes to try and make our panic handling more robust by hard disabling interrupts, and not marking stopped CPUs as offline because they haven't been properly offlined. - three other minor fixes. Thanks to: Aneesh Kumar K.V, Michael Jeanson, Nicholas Piggin. * tag 'powerpc-4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/mm/hash/4k: Free hugetlb page table caches correctly. powerpc/64s/radix: Fix radix_kvm_prefetch_workaround paca access of not possible CPU powerpc/64s: Fix build failures with CONFIG_NMI_IPI=n powerpc/64: hard disable irqs on the panic()ing CPU powerpc: smp_send_stop do not offline stopped CPUs powerpc/64: hard disable irqs in panic_smp_self_stop powerpc/64s: Fix DT CPU features Power9 DD2.1 logic powerpc/64s/radix: Fix MADV_[FREE|DONTNEED] TLB flush miss problem with THP powerpc/e500mc: Set assembler machine type to e500mc
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Catalin Marinas: - clear buffers allocated with FORCE_CONTIGUOUS explicitly until the CMA code honours __GFP_ZERO - notrace annotation for secondary_start_kernel() - use early_param() instead of __setup() for "kpti=" as it is needed for the cpufeature callback remapping swapper to non-global mappings - ensure writes to swapper are ordered wrt subsequent cache maintenance in the kpti non-global remapping code * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: mm: Ensure writes to swapper are ordered wrt subsequent cache maintenance arm64: kpti: Use early_param for kpti= command-line option arm64: make secondary_start_kernel() notrace arm64: dma-mapping: clear buffers allocated with FORCE_CONTIGUOUS flag
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Radim Krčmář: "ARM: - Lazy FPSIMD switching fixes - Really disable compat ioctls on architectures that don't want it - Disable compat on arm64 (it was never implemented...) - Rely on architectural requirements for GICV on GICv3 - Detect bad alignments in unmap_stage2_range x86: - Add nested VM entry checks to avoid broken error recovery path - Minor documentation fix" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: fix KVM_CAP_HYPERV_TLBFLUSH paragraph number kvm: vmx: Nested VM-entry prereqs for event inj. KVM: arm64: Prevent KVM_COMPAT from being selected KVM: Enforce error in ioctl for compat tasks when !KVM_COMPAT KVM: arm/arm64: add WARN_ON if size is not PAGE_SIZE aligned in unmap_stage2_range KVM: arm64: Avoid mistaken attempts to save SVE state for vcpus KVM: arm64/sve: Fix SVE trap restoration for non-current tasks KVM: arm64: Don't mask softirq with IRQs disabled in vcpu_put() arm64: Introduce sysreg_clear_set() KVM: arm/arm64: Drop resource size check for GICV window
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fixes from Juergen Gross: "This contains the following fixes/cleanups: - the removal of a BUG_ON() which wasn't necessary and which could trigger now due to a recent change - a correction of a long standing bug happening very rarely in Xen dom0 when a hypercall buffer from user land was not accessible by the hypervisor for very short periods of time due to e.g. page migration or compaction - usage of EXPORT_SYMBOL_GPL() instead of EXPORT_SYMBOL() in a Xen-related driver (no breakage possible as using those symbols without others already exported via EXPORT-SYMBOL_GPL() wouldn't make any sense) - a simplification for Xen PVH or Xen ARM guests - some additional error handling for callers of xenbus_printf()" * tag 'for-linus-4.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: Remove unnecessary BUG_ON from __unbind_from_irq() xen: add new hypercall buffer mapping device xen/scsiback: add error handling for xenbus_printf scsi: xen-scsifront: add error handling for xenbus_printf xen/grant-table: Export gnttab_{alloc|free}_pages as GPL xen: add error handling for xenbus_printf xen: share start flags between PV and PVH
-
Kirill A. Shutemov authored
early_identify_cpu() has to use early version of pgtable_l5_enabled() that doesn't rely on cpu_feature_enabled(). Defining USE_EARLY_PGTABLE_L5 before all includes does the trick. I lost the define in one of reworks of the original patch. Fixes: 372fddf7 ("x86/mm: Introduce the 'no5lvl' kernel parameter") Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Link: https://lkml.kernel.org/r/20180622220841.54135-3-kirill.shutemov@linux.intel.com
-
Kirill A. Shutemov authored
This reverts commit e4e961e3. We need to use early version of pgtable_l5_enabled() in early_identify_cpu() as this code runs before cpu_feature_enabled() is usable. But it leads to section mismatch: cpu_init() load_mm_ldt() ldt_slot_va() LDT_BASE_ADDR LDT_PGD_ENTRY pgtable_l5_enabled() __pgtable_l5_enabled __pgtable_l5_enabled marked as __initdata, but cpu_init() is not __init. It's fixable: early code can be isolated into a separate translation unit, but such change collides with other work in the area. That's too much hassle to save 4 bytes of memory. Return __pgtable_l5_enabled back to be __ro_after_init. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Link: https://lkml.kernel.org/r/20180622220841.54135-2-kirill.shutemov@linux.intel.com
-