- 19 Nov, 2018 36 commits
-
-
Alex Deucher authored
Use the define rather than hardcoded value. Acked-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Huang Rui <ray.huang@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Trigger Huang authored
A bad job is the one triggered TDR(In the current amdgpu's implementation, actually all the jobs in the current joq-queue will be treated as bad jobs). In the recovery process, its fence will be fake signaled and as a result, the work behind will be scheduled to delete it from the mirror list, but if the TDR process is invoked before the work's execution, then this bad job might be processed again and the call dma_fence_set_error to its fence in TDR process will lead to kernel warning trace: [ 143.033605] WARNING: CPU: 2 PID: 53 at ./include/linux/dma-fence.h:437 amddrm_sched_job_recovery+0x1af/0x1c0 [amd_sched] kernel: [ 143.033606] Modules linked in: amdgpu(OE) amdchash(OE) amdttm(OE) amd_sched(OE) amdkcl(OE) amd_iommu_v2 drm_kms_helper drm i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 snd_hda_codec_generic crypto_simd glue_helper cryptd snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq joydev snd_seq_device snd_timer snd soundcore binfmt_misc input_leds mac_hid serio_raw nfsd auth_rpcgss nfs_acl lockd grace sunrpc sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 8139too floppy psmouse 8139cp mii i2c_piix4 pata_acpi [ 143.033649] CPU: 2 PID: 53 Comm: kworker/2:1 Tainted: G OE 4.15.0-20-generic #21-Ubuntu [ 143.033650] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 143.033653] Workqueue: events drm_sched_job_timedout [amd_sched] [ 143.033656] RIP: 0010:amddrm_sched_job_recovery+0x1af/0x1c0 [amd_sched] [ 143.033657] RSP: 0018:ffffa9f880fe7d48 EFLAGS: 00010202 [ 143.033659] RAX: 0000000000000007 RBX: ffff9b98f2b24c00 RCX: ffff9b98efef4f08 [ 143.033660] RDX: ffff9b98f2b27400 RSI: ffff9b98f2b24c50 RDI: ffff9b98efef4f18 [ 143.033660] RBP: ffffa9f880fe7d98 R08: 0000000000000001 R09: 00000000000002b6 [ 143.033661] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9b98efef3430 [ 143.033662] R13: ffff9b98efef4d80 R14: ffff9b98efef4e98 R15: ffff9b98eaf91c00 [ 143.033663] FS: 0000000000000000(0000) GS:ffff9b98ffd00000(0000) knlGS:0000000000000000 [ 143.033664] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 143.033665] CR2: 00007fc49c96d470 CR3: 000000001400a005 CR4: 00000000003606e0 [ 143.033669] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 143.033669] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 143.033670] Call Trace: [ 143.033744] amdgpu_device_gpu_recover+0x144/0x820 [amdgpu] [ 143.033788] amdgpu_job_timedout+0x9b/0xa0 [amdgpu] [ 143.033791] drm_sched_job_timedout+0xcc/0x150 [amd_sched] [ 143.033795] process_one_work+0x1de/0x410 [ 143.033797] worker_thread+0x32/0x410 [ 143.033799] kthread+0x121/0x140 [ 143.033801] ? process_one_work+0x410/0x410 [ 143.033803] ? kthread_create_worker_on_cpu+0x70/0x70 [ 143.033806] ret_from_fork+0x35/0x40 So just delete the bad job from mirror list directly Changes in v3: - Add a helper function to delete the bad jobs from mirror list and call it directly *before* the job's fence is signaled Changes in v2: - delete the useless list node check - also delete bad jobs in drm_sched_main because: kthread_unpark(ring->sched.thread) will be invoked very early before amdgpu_device_gpu_recover's return, then drm_sched_main will have chance to pick up a new job from the job queue. This new job will be added into the mirror list and processed by amdgpu_job_run, but may not be deleted from the mirror list on time due to the same reason. And finally re-processed by drm_sched_job_recovery Signed-off-by:
Trigger Huang <Trigger.Huang@amd.com> Reviewed-by:
Christian König <chrstian.koenig@amd.com> Signed-off-by:
-
Alex Deucher authored
Looks like a copy paste typo. Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Yong Zhao authored
This is a known gfx9 HW issue, and this change can perfectly workaround the issue. Signed-off-by:
Yong Zhao <Yong.Zhao@amd.com> Reviewed-by:
-
Yong Zhao authored
This makes debug message get printed even when there is early return. Signed-off-by:
-
Gang Ba authored
Add Vega12 and Polaris12 device info and device IDs to KFD. Signed-off-by:
Gang Ba <gaba@amd.com> Reviewed-by:
-
Yong Zhao authored
This will make reading code much easier. This fixes a few spots missed in a previous commit with the same title. Signed-off-by:
-
Chengming Gui authored
With GFXOFF enabled, this patch will cause PCO amdgpu_test failed, but GFXOFF is necessary for PCO, so revert the patch. This reverts commit b83761bb. v2: add a comment for future reference (Alex) Reviewed-by:
Jack Gui <Jack.Gui@amd.com> Signed-off-by:
-
Joerg Roedel authored
Running kfdtest on an AMD Carizzo flooded the kernel log with thousands of these "was not implemented" messages, making it impossible to see other messages there. Ratelimit the messages to prevent user-space from flooding the kernel log. Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
David Francis authored
[Why] There was a full clock request struct of which only one value was being used. [How] Replace the struct with a uint32_t Signed-off-by:
David Francis <David.Francis@amd.com> Reviewed-by:
Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Reviewed-by:
Sun peng Li <Sunpeng.Li@amd.com> Acked-by:
Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] Many panels support more than 8bpc but some modes are unavailable while running at greater than 8bpc due to DP/HDMI bandwidth constraints. Support for more than 8bpc was added recently in the driver but it defaults to the maximum supported bpc - locking out these modes. This should be a user configurable option such that the user can select what bpc configuration they would like. [How] This patch adds support for getting and setting the amdgpu driver specific "max bpc" property on the connector. It also adds support for limiting the output bpc based on the property value. The default limitation is the lowest value in the range, 8bpc. This was the old value before the range was uncapped. This patch should be updated/replaced later once common drm support for max bpc lands. Bugzilla: https://bugs.freedesktop.org/108542 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201585 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200645 Fixes: e03fd3f3 ("drm/amd/display: Do not limit color depth to 8bpc") v2: rebase on upstream (Alex) Signed-off-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] Many panels support more than 8bpc but some modes are unavailable while running at greater than 8bpc due to DP/HDMI bandwidth constraints. Support for more than 8bpc was added recently in the driver but it defaults to the maximum supported bpc - locking out these modes. This should be a user configurable option such that the user can select what bpc configuration they would like. [How] This patch introduces the "max bpc" amdgpu driver specific connector property so the user can limit the maximum bpc. It ranges from 8 to 16. This doesn't directly set the preferred bpc for the panel since it follows Intel's existing driver conventions. This proprety should be removed once common drm support for max bpc lands. v2: rebase on upstream (Alex) Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/amd/amdgpu/psp_v10_0.c: In function 'psp_v10_0_ring_stop': drivers/gpu/drm/amd/amdgpu/psp_v10_0.c:230:19: warning: variable 'ring' set but not used [-Wunused-but-set-variable] drivers/gpu/drm/amd/amdgpu/psp_v3_1.c: In function 'psp_v3_1_ring_stop': drivers/gpu/drm/amd/amdgpu/psp_v3_1.c:359:19: warning: variable ‘ring’ set but not used [-Wunused-but-set-variable] It not used since commit 4ef72453 ("drm/amdgpu: added api for stopping psp ring (v2)") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
-
Emily Deng authored
Aligned the amd_sriov_msg_pf2vf_info_header and amd_sriov_msg_pf2vf_info_header's definition with libgv. Signed-off-by:
Emily Deng <Emily.Deng@amd.com> Reviewed-by:
Frank.Min <Frank.Min@amd.com> Signed-off-by:
-
David Francis authored
[Why] dc_link_set_backlight_level can be called from a context where the stream is unknown. In this case, we can still find which controller is driving this particular backlight [How] Compare links for equality instead of streams Signed-off-by:
-
Charlene Liu authored
expose dcn10_get_surface_visual_confirm_color() to be used in the future Signed-off-by:
Charlene Liu <charlene.liu@amd.com> Reviewed-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by:
-
Dmytro Laktyushkin authored
A number of registers need to be updated for all active pipes wherever any pipe causes a change in watermarks. This change separates programming of these registers into a separate function call that is called for all active pipes during a bw update. Signed-off-by:
Tony Cheng <Tony.Cheng@amd.com> Acked-by:
-
Joshua Aberback authored
[Why] We observed an issue where a display would not accept programming of the ignore_MSA_timing_param bit if the stream was blanked. [How] move enable_stream_features from enable_link_dp to core_link_enable_stream, after unblank_stream Signed-off-by:
Joshua Aberback <joshua.aberback@amd.com> Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
Anthony Koo <Anthony.Koo@amd.com> Acked-by:
-
Eric Bernstein authored
[Why] For some complicated blending transition cases, the head pipe of the second stream may end up being a higher pipe index than the free pipe. In those cases dc_add_plane_to_context will incorrectly set the tail_pipe to the free pipe, which will cause the top_pipe and bottom_pipe to be the same [How] Move the call to resource_get_tail_pipe_for_stream() to be before call to acquire_free_pipe_for_stream(). Signed-off-by:
Eric Bernstein <eric.bernstein@amd.com> Reviewed-by:
-
Xiaodong Yan authored
DPCD Extended Receiver Capability Field [Why] 1.dpcd extended receiver capability sometimes read fail, and corrupted data leads to sink caps is not correct. 2.sometimes sink reply ack with fewer data [How] check the return value of core_link_read_dpcd, try to read again when failure happens Signed-off-by:
Xiaodong Yan <Xiaodong.Yan@amd.com> Reviewed-by:
Wenjing Liu <Wenjing.Liu@amd.com> Acked-by:
-
Steven Chiu authored
Signed-off-by:
Steven Chiu <steven.chiu@amd.com> Reviewed-by:
-
Dmytro Laktyushkin authored
Change the math to work in viewport rotation when calculating viewport and viewport adjustment. This simplifies the math for viewport calculation and makes viewport adjustment easier to understand. Signed-off-by:
-
Jun Lei authored
[why] Underflow is asserted due to some timing condition which does not actually result in visible underflow (i.e. it occurs while blanked). [how] Force clear underflow occured bit whenver we unblank. Signed-off-by:
Aric Cyr <Aric.Cyr@amd.com> Acked-by:
-
Nikola Cornij authored
[why] The condition to check for two pixels per containter has become rather long and is used in number of places. [how] Move the check to a helper function. Signed-off-by:
Nikola Cornij <nikola.cornij@amd.com> Reviewed-by:
-
Yogesh Mohan Marimuthu authored
[why] phy_pix_clk is one of the variable used to check if one PLL can be shared with displays having common mode set configuration. As of now phy_pix_clock varialbe is calculated in function dc_validate_stream(). dc_validate_stream() function is called after clocks are assigned for the new display. Due to this during hotplug, when PLL sharing conditions are checked for new display phy_pix_clk variable will be 0 and for displays that are already enabled phy_pix_clk will have some value. Hence PLL will not be shared and if the display hardware doesn't have any more PLL to assign, mode set will fail due to resource unavailability. [how] Instead of only calculating the phy_pix_clk variable after the PLL is assigned for new display, this patch calculates phy_pix_clk also during the before assigning the PLL for new display. Signed-off-by:
Yogesh Mohan Marimuthu <yogesh.mohanmarimuthu@amd.com> Reviewed-by:
-
Yongqiang Sun authored
[Why] Typo for return check value. [How] Correct one should be "return enable ? true : false;" Signed-off-by:
Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by:
-
David Francis authored
[Why] Unused variable "refresh" and incorrect comment formatting [How] Remove variable, reindent comments Signed-off-by:
-
David Francis authored
[Why] DMCU firmware is not required - the system is expected to run fine without it. Therefore, wherever dmcu functions could be called, dmcu initialization shoudl be checked [How] Use the helpful hook dmcu_funcs->is_dmcu_initialized Signed-off-by:
Hersen Wu <hersenxs.wu@amd.com> Acked-by:
-
Murton Liu authored
[why] Gamma was always being set as identity on SDR monitor, leading to no changes in gamma. This caused nightlight to not apply correctly. [how] Added a default gamma structure to compare against in the sdr case. Signed-off-by:
Murton Liu <murton.liu@amd.com> Reviewed-by:
Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by:
-
Jun Lei authored
[why] HUBP underflow is never cleared, which causes underflow in one test to fail another test, violating the independence requirements [how] Rather than make clearing implicit, we explicitly clear underflow status in DTN. Signed-off-by:
-
Nevenko Stupar authored
expose this functions for future use. Signed-off-by:
Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by:
-
Wenjing Liu authored
[Why] dc_add_stream_to_context is used to check bw requirement. It is not an error if it fails. [How] Replace DC_ERROR with DC_LOG_WARNING. Signed-off-by:
-
David Francis authored
[Why] dc_state has an array of dc_stream_status that contain pointers to the dc_plane_state and other useful information Confusingly, dc_stream_state also contains a dc_stream_status called status. This struct was partially initialized and used in a few places [How] stream->status.link has been replaced with stream->sink->link. If a stream does not have a sink, or a sink does not have a link, something has gone seriously wrong All other properties of stream->status were zeroed by kzalloc and never initialized, so they have been replaced by the number 0 This is a refactor: no functional change is intended Signed-off-by:
-
Steven Chiu authored
Signed-off-by:
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
New features for 4.21: amdgpu: - Support for SDMA paging queue on vega - Put compute EOP buffers into vram for better performance - Share more code with amdkfd - Support for scanout with DCC on gfx9 - Initial kerneldoc for DC - Updated SMU firmware support for gfx8 chips - Rework CSA handling for eventual support for preemption - XGMI PSP support - Clean up RLC handling - Enable GPU reset by default on VI, SOC15 dGPUs - Ring and IB test cleanups amdkfd: - Share more code with amdgpu ttm: - Move global init out of the drivers scheduler: - Track if schedulers are ready for work - Timeout/fault handling changes to facilitate GPU recovery Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181114165113.3751-1-alexander.deucher@amd.com
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for v4.21, part 1: UAPI Changes: - Add syncobj timeline support to drm. Cross-subsystem Changes: - Remove shared fence staging in dma-buf's fence object, and allow reserving more than 1 fence and add more paranoia when debugging. - Constify infoframe functions in video/hdmi. Core Changes: - Add vkms todo, and a lot of assorted doc fixes. - Drop transitional helpers and convert drivers to use drm_atomic_helper_shutdown(). - Move atomic state helper functions to drm_atomic_state_helper.[ch] - Refactor drm selftests, and add new tests. - DP MST atomic state cleanups. - Drop EXPORT_SYMBOL from drm leases. - Lease cleanups and fixes. - Create render node for vgem. Driver Changes: - Fix build failure in imx without fbdev emulation. - Add rotation quirk for GPD win2 panel. - Add support for various CDTech panels, Banana Pi Panel, DLC1010GIG, Olimex LCD-O-LinuXino, Samsung S6D16D0, Truly NT35597 WQXGA, Himax HX8357D, simulated RTSM AEMv8. - Add dw_hdmi support to rockchip driver. - Fix YUV support in vc4. - Fix resource id handling in virtio. - Make rockchip use dw-mipi-dsi bridge driver, and add dual dsi support. - Advertise that tinydrm only supports DRM_FORMAT_MOD_LINEAR. - Convert many drivers to use atomic helpers, and drm_fbdev_generic_setup(). - Add Mali linear tiled formats, and enable them in the Mali-DP driver. - Add support for H6 DE3 mixer 0, DW HDMI, HDMI PHY and TCON TOP. - Assorted driver cleanups and fixes. Signed-off-by:
-
- 18 Nov, 2018 4 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull libnvdimm fixes from Dan Williams: "A small batch of fixes for v4.20-rc3. The overflow continuation fix addresses something that has been broken for several releases. Arguably it could wait even longer, but it's a one line fix and this finishes the last of the known address range scrub bug reports. The revert addresses a lockdep regression. The unit tests are not critical to fix, but no reason to hold this fix back. Summary: - Address Range Scrub overflow continuation handling has been broken since it was initially merged. It was only recently that error injection and platform-BIOS support enabled this corner case to be exercised. - The recent attempt to provide more isolation for the kernel Address Range Scrub state machine from userapace initiated sessions triggers a lockdep report. Revert and try again at the next merge window. - Fix a kasan reported buffer overflow in libnvdimm unit test infrastrucutre (nfit_test)" * tag 'libnvdimm-fixes-4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: Revert "acpi, nfit: Further restrict userspace ARS start requests" acpi, nfit: Fix ARS overflow continuation tools/testing/nvdimm: Fix the array size for dimm devices. -
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "16 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm/memblock.c: fix a typo in __next_mem_pfn_range() comments mm, page_alloc: check for max order in hot path scripts/spdxcheck.py: make python3 compliant tmpfs: make lseek(SEEK_DATA/SEK_HOLE) return ENXIO with a negative offset lib/ubsan.c: don't mark __ubsan_handle_builtin_unreachable as noreturn mm/vmstat.c: fix NUMA statistics updates mm/gup.c: fix follow_page_mask() kerneldoc comment ocfs2: free up write context when direct IO failed scripts/faddr2line: fix location of start_kernel in comment mm: don't reclaim inodes with many attached pages mm, memory_hotplug: check zone_movable in has_unmovable_pages mm/swapfile.c: use kvzalloc for swap_info_struct allocation MAINTAINERS: update OMAP MMC entry hugetlbfs: fix kernel BUG at fs/hugetlbfs/inode.c:444! kernel/sched/psi.c: simplify cgroup_move_task() z3fold: fix possible reclaim races
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Ingo Molnar: "Fix an exec() related scalability/performance regression, which was caused by incorrectly calculating load and migrating tasks on exec() when they shouldn't be" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Fix cpu_util_wake() for 'execl' type workloads
-
