- 12 Jul, 2018 37 commits
-
-
Brian Foster authored
Now that all xfs_bunmapi() callers use ->t_dfops, remove the unnecessary parameter and access ->t_dfops directly. This patch does not change behavior. Signed-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
-
Brian Foster authored
Use ->t_dfops for all remaining xfs_bunmapi() callers. This prepares the latter to no longer require a dfops parameter. Note that xfs_itruncate_extents_flags() associates a local dfops with a transaction provided from the caller. Since there are multiple callers, set and reset ->t_dfops before the function returns to avoid exposure of stack memory to the caller. Signed-off-by:
-
Brian Foster authored
Now that all callers use ->t_dfops, the xfs_bmapi_write() dfops parameter is no longer necessary. Remove it and access ->t_dfops directly. This patch does not change behavior. Signed-off-by:
-
Brian Foster authored
Attach ->t_dfops for all remaining callers of xfs_bmapi_write(). This prepares the latter to no longer require a separate dfops parameter. Note that xfs_symlink() already uses ->t_dfops. Fix up the local references for consistency. Signed-off-by:
-
Brian Foster authored
xfs_dquot_disk_alloc() receives a transaction from the caller and passes a local dfops along to xfs_bmapi_write(). If we attach this dfops to the transaction, we have to make sure to clear it before returning to avoid invalid access of stack memory. Since xfs_qm_dqread_alloc() is the only caller, pull dfops into the caller and attach it to the transaction to eliminate this pattern entirely. Signed-off-by:
-
Brian Foster authored
Now that xfs_da_args->dfops is always assigned from a ->t_dfops pointer (or one that is immediately attached), replace all downstream accesses of the former with the latter and remove the field from struct xfs_da_args. Signed-off-by:
-
Brian Foster authored
Attach the local dfops to ->t_dfops of the extent split transaction. Since this is the only caller of xfs_bmap_split_extent_at(), remove the dfops parameter as well. Signed-off-by:
-
Brian Foster authored
Now that the attribute fork add tx carries dfops along with the transaction, it is unnecessary to pass it down the stack. Remove the dfops parameter and access ->t_dfops directly where necessary. This patch does not change behavior. Signed-off-by:
-
Brian Foster authored
Attach the local dfops to the transaction allocated for xattr add and remove operations. Add an earlier initialization in xfs_attr_remove() to ensure the structure is valid if it remains unused at transaction commit time. Signed-off-by:
-
Brian Foster authored
Log recovery passes down a central dfops structure to recovery handlers for bui and cui log items. Each of these handlers allocates and commits a transaction and defers any remaining operations to be completed by the main recovery sequence. Since dfops outlives the transaction in this context, set and clear ->t_dfops appropriately such that the *_finish_item() paths and below (i.e., xfs_bmapi*()) can expect to find the dfops in the transaction without it being committed with the dfops attached. This is required because transaction commit expects that an associated dfops is finished and in this context the dfops may be populated at commit time. Signed-off-by:
-
Brian Foster authored
All callers of the directory create, rename and remove interfaces already associate the dfops with the transaction. Drop the dfops parameters in these calls in preparation for further cleanups in the layers below. This patch does not change behavior. Signed-off-by:
-
Brian Foster authored
The inode free callchain starting in xfs_inactive_ifree() already associates its dfops with the transaction. It still passes the dfops on the stack down through xfs_difree_inobt(), however. Clean up the call stack and reference dfops directly from the transaction. This patch does not change behavior. Signed-off-by:
-
Brian Foster authored
The ->t_agfl_dfops field is currently used to defer agfl block frees from associated transaction contexts. While all known problematic contexts have already been updated to use ->t_agfl_dfops, the broader goal is defer agfl frees from all callers that already use a deferred operations structure. Further, the transaction field facilitates a good amount of code clean up where the transaction and dfops have historically been passed down through the stack separately. Rename the field to something more generic to prepare to use it as such throughout XFS. This patch does not change behavior. Signed-off-by:
-
Brian Foster authored
A couple COW fork unwritten extent conversion helpers pass an uninitialized dfops pointer to xfs_bmapi_write(). This does not cause problems because conversion does not use a transaction or the dfops structure for the COW fork. Drop the uninitialized usage of dfops in these codepaths and pass NULL along to xfs_bmapi_write() instead. Signed-off-by:
Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
Switch to using the iomap_page structure for checking sub-page uptodate status and track sub-page I/O completion status, and remove large quantities of boilerplate code working around buffer heads. Signed-off-by:
-
Christoph Hellwig authored
After already supporting a simple implementation of buffered writes for the blocksize == PAGE_SIZE case in the last commit this adds full support even for smaller block sizes. There are three bits of per-block information in the buffer_head structure that really matter for the iomap read and write path: - uptodate status (BH_uptodate) - marked as currently under read I/O (BH_Async_Read) - marked as currently under write I/O (BH_Async_Write) Instead of having new per-block structures this now adds a per-page structure called struct iomap_page to track this information in a slightly different form: - a bitmap for the per-block uptodate status. For worst case of a 64k page size system this bitmap needs to contain 128 bits. For the typical 4k page size case it only needs 8 bits, although we still need a full unsigned long due to the way the atomic bitmap API works. - two atomic_t counters are used to track the outstanding read and write counts There is quite a bit of boilerplate code as the buffered I/O path uses various helper methods, but the actual code is very straight forward. Signed-off-by:
-
Christoph Hellwig authored
Disable the IOMAP_F_BUFFER_HEAD flag on file systems with a block size equal to the page size, and deal with pages without buffer heads in writeback. Thanks to the previous refactoring this is basically trivial now. Signed-off-by:
-
Christoph Hellwig authored
Rejuggle how we deal with the different error vs non-error and have ioends vs not have ioend cases to keep the fast path streamlined, and the duplicate code at a minimum. Signed-off-by:
-
Christoph Hellwig authored
This helper only has two callers, one of them with a constant error argument. Remove it to make pending changes to the code a little easier. Signed-off-by:
-
Christoph Hellwig authored
This keeps it in a single place so it can be made otional more easily. Signed-off-by:
-
Christoph Hellwig authored
Calculate all information for the bio based on the passed in information without requiring a buffer_head structure. Signed-off-by:
-
Christoph Hellwig authored
Simplify the way we check for a valid imap - we know we have a valid mapping after xfs_map_blocks returned successfully, and we know we can call xfs_imap_valid on any imap, as it will always fail on a zero-initialized map. We can also remove the xfs_imap_valid function and fold it into xfs_map_blocks now. Signed-off-by:
-
Christoph Hellwig authored
xfs_bmapi_read adds zero value in xfs_map_blocks. Replace it with a direct call to the low-level extent lookup function. Note that we now always pass a 0 length to the trace points as we ask for an unspecified len. Signed-off-by:
-
Christoph Hellwig authored
We only have one caller left, and open coding the simple extent list lookup in it allows us to make the code both more understandable and reuse calculations and variables already present. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Dave Chinner authored
xfs_writepage_map() iterates over the bufferheads on a page to decide what sort of IO to do and what actions to take. However, when it comes to reflink and deciding when it needs to execute a COW operation, we no longer look at the bufferhead state but instead we ignore than and look up internal state held in the COW fork extent list. This means xfs_writepage_map() is somewhat confused. It does stuff, then ignores it, then tries to handle the impedence mismatch by shovelling the results inside the existing mapping code. It works, but it's a bit of a mess and it makes it hard to fix the cached map bug that the writepage code currently has. To unify the two different mechanisms, we first have to choose a direction. That's already been set - we're de-emphasising bufferheads so they are no longer a control structure as we need to do taht to allow for eventual removal. Hence we need to move away from looking at bufferhead state to determine what operations we need to perform. We can't completely get rid of bufferheads yet - they do contain some state that is absolutely necessary, such as whether that part of the page contains valid data or not (buffer_uptodate()). Other state in the bufferhead is redundant: BH_dirty - the page is dirty, so we can ignore this and just write it BH_delay - we have delalloc extent info in the DATA fork extent tree BH_unwritten - same as BH_delay BH_mapped - indicates we've already used it once for IO and it is mapped to a disk address. Needs to be ignored for COW blocks. The BH_mapped flag is an interesting case - it's supposed to indicate that it's already mapped to disk and so we can just use it "as is". In theory, we don't even have to do an extent lookup to find where to write it too, but we have to do that anyway to determine we are actually writing over a valid extent. Hence it's not even serving the purpose of avoiding a an extent lookup during writeback, and so we can pretty much ignore it. Especially as we have to ignore it for COW operations... Therefore, use the extent map as the source of information to tell us what actions we need to take and what sort of IO we should perform. The first step is to have xfs_map_blocks() set the io type according to what it looks up. This means it can easily handle both normal overwrite and COW cases. The only thing we also need to add is the ability to return hole mappings. We need to return and cache hole mappings now for the case of multiple blocks per page. We no longer use the BH_mapped to indicate a block over a hole, so we have to get that info from xfs_map_blocks(). We cache it so that holes that span two pages don't need separate lookups. This allows us to avoid ever doing write IO over a hole, too. Now that we have xfs_map_blocks() returning both a cached map and the type of IO we need to perform, we can rewrite xfs_writepage_map() to drop all the bufferhead control. It's also much simplified because it doesn't need to explicitly handle COW operations. Instead of iterating bufferheads, it iterates blocks within the page and then looks up what per-block state is required from the appropriate bufferhead. It then validates the cached map, and if it's not valid, we get a new map. If we don't get a valid map or it's over a hole, we skip the block. At this point, we have to remap the bufferhead via xfs_map_at_offset(). As previously noted, we had to do this even if the buffer was already mapped as the mapping would be stale for XFS_IO_DELALLOC, XFS_IO_UNWRITTEN and XFS_IO_COW IO types. With xfs_map_blocks() now controlling the type, even XFS_IO_OVERWRITE types need remapping, as converted-but-not-yet- written delalloc extents beyond EOF can be reported at XFS_IO_OVERWRITE. Bufferheads that span such regions still need their BH_Delay flags cleared and their block numbers calculated, so we now unconditionally map each bufferhead before submission. But wait! There's more - remember the old "treat unwritten extents as holes on read" hack? Yeah, that means we can have a dirty page with unmapped, unwritten bufferheads that contain data! What makes these so special is that the unwritten "hole" bufferheads do not have a valid block device pointer, so if we attempt to write them xfs_add_to_ioend() blows up. So we make xfs_map_at_offset() do the "realtime or data device" lookup from the inode and ignore what was or wasn't put into the bufferhead when the buffer was instantiated. The astute reader will have realised by now that this code treats unwritten extents in multiple-blocks-per-page situations differently. If we get any combination of unwritten blocks on a dirty page that contain valid data in the page, we're going to convert them to real extents. This can actually be a win, because it means that pages with interleaving unwritten and written blocks will get converted to a single written extent with zeros replacing the interspersed unwritten blocks. This is actually good for reducing extent list and conversion overhead, and it means we issue a contiguous IO instead of lots of little ones. The downside is that we use up a little extra IO bandwidth. Neither of these seem like a bad thing given that spinning disks are seek sensitive, and SSDs/pmem have bandwidth to burn and the lower Io latency/CPU overhead of fewer, larger IOs will result in better performance on them... As a result of all this, the only state we actually care about from the bufferhead is a single flag - BH_Uptodate. We still use the bufferhead to pass some information to the bio via xfs_add_to_ioend(), but that is trivial to separate and pass explicitly. This means we really only need 1 bit of state per block per page from the buffered write path in the writeback path. Everything else we do with the bufferhead is purely to make the buffered IO front end continue to work correctly. i.e we've pretty much marginalised bufferheads in the writeback path completely. Signed-off-By:
Dave Chinner <dchinner@redhat.com> [hch: forward port, refactor and split off bits into other commits] Signed-off-by:
-
Christoph Hellwig authored
Calling it file_offset makes the usage more clear, especially with a new poffset variable that will be added soon for the offset inside the page. Signed-off-by:
-
Christoph Hellwig authored
We can handle the existing cow mapping case as a special case directly in xfs_writepage_map, and share code for allocating delalloc blocks with regular I/O in xfs_map_blocks. This means we need to always call xfs_map_blocks for reflink inodes, but we can still skip most of the work if it turns out that there is no COW mapping overlapping the current block. As a subtle detail we need to start caching holes in the wpc to deal with the case of COW reservations between EOF. But we'll need that infrastructure later anyway, so this is no big deal. Based on a patch from Dave Chinner. Signed-off-by:
-
Christoph Hellwig authored
We already have to check for overlapping COW extents everytime we come back to a page in xfs_writepage_map / xfs_map_cow, so this additional trim is not required. Signed-off-by:
-
Christoph Hellwig authored
We want to be able to use the extent state as a reliably indicator for the type of I/O, and stop using the buffer head state. For this we need to stop using the XFS_BMAPI_IGSTATE so that we don't see merged extents of different types. Based on a patch from Dave Chinner. Signed-off-by:
-
Christoph Hellwig authored
Finding a buffer that isn't uptodate doesn't invalidate the mapping for any given block. The last_sector check will already take care of starting another ioend as soon as we find any non-update buffer, and if the current mapping doesn't include the next uptodate buffer the xfs_imap_valid check will take care of it. Signed-off-by:
-
Christoph Hellwig authored
We already track the page uptodate status based on the buffer uptodate status, which is updated whenever reading or zeroing blocks. This code has been there since commit a ptool commit in 2002, which claims to: "merge" the 2.4 fsx fix for block size < page size to 2.5. This needed major changes to actually fit. and isn't present in other writepage implementations. Signed-off-by: -
Christoph Hellwig authored
Both callers want the same looking, so do it only once. Signed-off-by:
-
Christoph Hellwig authored
Instead of looking at the buffer heads to see if a block is delalloc just call xfs_bmap_punch_delalloc_range on the whole page - this will leave any non-delalloc block intact and handle the iteration for us. As a side effect one more place stops caring about buffer heads and we can remove the xfs_check_page_type function entirely. Signed-off-by:
-
Christoph Hellwig authored
For file systems with a block size that equals the page size we never do partial reads, so we can use the buffer_head-less iomap versions of readpage and readpages without conflicting with the buffer_head structures create later in write_begin. Signed-off-by:
-
Darrick J. Wong authored
-
- 08 Jul, 2018 3 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "A small collection of fixes, sort of the usual at this point, all for i.MX or OMAP: - Enable ULPI drivers on i.MX to avoid a hang - Pinctrl fix for touchscreen on i.MX51 ZII RDU1 - Fixes for ethernet clock references on am3517 - mmc0 write protect detection fix for am335x - kzalloc->kcalloc conversion in an OMAP driver - USB metastability fix for USB on dra7 - Fix touchscreen wakeup on am437x" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: imx_v4_v5_defconfig: Select ULPI support ARM: imx_v6_v7_defconfig: Select ULPI support ARM: dts: omap3: Fix am3517 mdio and emac clock references ARM: dts: am335x-bone-common: Fix mmc0 Write Protect bus: ti-sysc: Use 2-factor allocator arguments ARM: dts: dra7: Disable metastability workaround for USB2 ARM: dts: imx51-zii-rdu1: fix touchscreen pinctrl ARM: dts: am437x: make edt-ft5x06 a wakeup source
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86/pti updates from Thomas Gleixner: "Two small fixes correcting the handling of SSB mitigations on AMD processors" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/bugs: Fix the AMD SSBD usage of the SPEC_CTRL MSR x86/bugs: Update when to check for the LS_CFG SSBD mitigation
-
