- 05 Apr, 2013 39 commits
-
-
Artem Bityutskiy authored
Be a bit stricter and add few more 'const' qualifiers. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
Be a bit stricter and add few more 'const' qualifiers. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Michael Buesch <m@bues.ch> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
Be a bit stricter and add few more 'const' qualifiers. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: "Rafał Miłecki" <zajec5@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
Be a bit stricter and add few more 'const' qualifiers. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
Be a bit stricter and add few more 'const' qualifiers. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
'mtd_device_parse_register()' and 'parse_mtd_partitions()' functions accept a an array of character pointers. These functions modify neither the pointers nor the characters they point to. The characters are actually names of the MTD parsers. At the moment, the argument type is 'const char **', which means that only the names of the parsers are constant. Let's turn the argument type into 'const char * const *', which means that both names and the pointers which point to them are constant. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
This driver depends on CONFIG_IXP2000 which is not defined anywhere, which means this driver is dead. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
This driver is marked as broken for very long time. Most probably this board is just something ancient no one cares about anyway. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
This driver depends on the CONFIG_TQM8xxL symbol, which is not defined anywhere, which means that this driver is dead. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
This driver depends on the CONFIG_RPXCLASSIC and CONFIG_RPXLITE symbols, which are not defined anywhere, and this means that this driver is dead. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: linux-pcmcia@lists.infradead.org Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-m68k@lists.linux-m68k.org Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
This driver depends on CONFIG_MBX which is not defined anywhere, which means this driver is dead. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: linux-pcmcia@lists.infradead.org Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-m68k@lists.linux-m68k.org Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
This driver depends on the CONFIG_DMV182 symbol which is not defined anywhere, and this means that this driver is dead. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
This driver depends on the CONFIG_DBOX2 symbol which does not exist in the kernel, which means the driver is dead. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Daniel Mack authored
In case the driver is not probed - due to config mismatches or errors in the DTS files - dev_get_drvdata() returns NULL, leading to an Ooops during boot. Make elm_config() return an error in such cases to propagate the error up to the user, so it can fall back to software mode. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Alexander Shiyan authored
Variable "onfi_version" is already set to zero before nand_flash_detect_onfi() call, so additional cleaning is not necessary. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Alexander Shiyan authored
NAND command, passed to cmd_ctrl(), is masked with 0xff. This patch removes this since masking is not necessary and masking is not performed in other places for same call. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Rafał Miłecki authored
This device was reported over a year ago on OpenWrt mailing list in the thread [OpenWrt-Devel] RedBoot partition table with winbond m25q128vb (unfortunately, I can't find message id). Macpaul seemed to have problems with partition driver, but it seems the device was working OK. Reported-by: Macpaul Lin <macpaul@gmail.com> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Syam Sidhardhan authored
kfree on NULL pointer is a no-op. Signed-off-by: Syam Sidhardhan <s.syam@samsung.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Krzysztof Mazur authored
Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Krzysztof Mazur authored
Not all SST devices implement the SST byte programming command. Some devices (like SST25VF064C) implement only standard m25p80 page write command. Now SPI flash devices that need sst_write() are explicitly marked with new SST_WRITE flag and the decision to use sst_write() is based on this flag instead of manufacturer id. Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Joe Schaack authored
Previously, partitions were limited to less than 4 GiB in size because the address and size were read as 32-bit values. Add support for 64-bit values to support devices of 4 GiB and larger. Signed-off-by: Joe Schaack <jschaack@xes-inc.com> Signed-off-by: Nate Case <ncase@xes-inc.com> Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Brian Norris authored
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
These drivers are deprecated for very long time, and we have a different driver for these called "diskonchip". Thus, kill the ancient cruft. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
Up until now we identified NAND chips by the 'device ID' part of the full chip ID array, which is the second full ID array byte. However, the newest flashes use the same device ID for chips with identical page and eraseblock sizes, but different OOB sizes. And unfortunately, it is not clear if there is a "standard" way to fetch the OOB size from chip's full ID array. Here is an example: Toshiba TC58NVG2S0F: 0x98, 0xdc, 0x90, 0x26, 0x76, 0x15, 0x01, 0x08 Toshiba TC58NVG3S0F: 0x98, 0xd3, 0x90, 0x26, 0x76, 0x15, 0x02, 0x08 The first one is a 512MiB NAND chip with 4KiB NAND pages, 256KiB eraseblock size and 224 bytes OOB. The second one is a 1GiB NAND chip with the same page and eraseblock sizes, but with 232 bytes OOB. This means that we have to store full ID in our NAND flashes table in order to distinguish between these 2. This patch adds the 'id[8]' field to the 'struct nand_flash_dev' structure, and it makes it to be a part of anonymous union, where the second member is a structure containing the 'mfr_id' and 'dev_id' bytes. The union makes sure that 'mfr_id' refers the same RAM address as 'id[0]' and 'dev_id' refers the same RAM address as 'id[1]'. The only motivation for the union is an assumption that 'type->dev_id' is more readable than 'type->id[1]'. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
Introduce helper macros for defining NAND chips. These macros do not really add much value in the current code-base. However, we are going to add full ID support which adds some more complexity to the table, and helper macros become useful for readability. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
NAND flashes with 256 bytes NAND pages are so old that probably do not exist any more. Let's remove few related pieces of code and forget about them forever. The assumption will be that 512 bytes NAND page size is the minimum possible. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
The 'id' is a bit confusing name because NAND IDs are multi-byte. Re-name it to 'dev_id' to make it clear that this is the "device ID" part (the second byte). While on it, clean-up the commentary for 'struct nand_flash_dev'. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
We have this unused macro, let's use it and justify its existence. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
It is unused. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
It is not used anywhere. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
We have only one AG-AND driver and it was not touched since 2005. It looks like AG-AND was not really make it to mass-production and can be considered a dead technology. Along with the AG-AND support, this patch removes the BBT_AUTO_REFRESH feature, because the only user of this feature is AG-AND. And even though it is implemented as a generic feature, I prefer to remove it because NAND flashes do not really need it in this form. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
The AG-AND support is about to be removed from MTD, because this technology is dead for long time. Thus, remove this the only AG-AND driver we have in the kernel tree. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
The MTD_NAND_MUSEUM_IDS configuration options was removed - update the lpc32xx_defconfig file. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
The MTD subsystem has its own small museum of ancient NANDs in a form of the CONFIG_MTD_NAND_MUSEUM_IDS configuration option. The museum contains stone age NANDs with 256 bytes pages, as well as iron age NANDs with 512 bytes per page and up to 8MiB page size. It is with great sorrow that I inform you that the museum is being decommissioned. The MTD subsystem is out of budget for Kconfig options and already has too many of them, and there is a general kernel trend to simplify the configuration menu. We remove the stone age exhibits along with closing the museum, but some of the iron age ones are transferred to the regular NAND depot. Namely, only those which have unique device IDs are transferred, and the ones which have conflicting device IDs are removed. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
Clean-up the code a little bit: * clean-up commentaries. * move macro definitions to the top of the file. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Uwe Kleine-König authored
Before this patch mtd_read_fact_prot_reg was used to check availability for both MTD_OTP_FACTORY and MTD_OTP_USER access. This made accessing user otp for chips that don't have a factory otp area impossible. So use the right wrapper depending on the intended area to be accessed. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Daniel Schwierzeck authored
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Daniel Schwierzeck authored
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
- 18 Mar, 2013 1 commit
-
-
git://git.infradead.org/linux-mtdLinus Torvalds authored
Pull MTD fixes from David Woodhouse: "This fixes a couple of problems. Firstly, some people are actually still using old small-page flash and we broke it by removing the ready check. Secondly. fix the handling of partitions on Broadcom 47xx devices. Recent changes had made it misdetect the location of the NVRAM and scribble over the bootloader when it tried to update the variables there. With predictably sad results." * tag 'for-linus-20130318' of git://git.infradead.org/linux-mtd: mtd: nand: reintroduce NAND_NO_READRDY as NAND_NEED_READRDY mtd: bcm47xxpart: look for NVRAM at the end of device Revert "mtd: bcm47xxpart: improve probing of nvram partition"
-