- 05 Aug, 2014 5 commits
-
-
Rajesh Borundia authored
o Initialization of dcbnl_ops after register netdev may result in dcbnl_ops not getting set before it is being accessed from open. So, moving it before register_netdev. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rajesh Borundia authored
o Earlier, set_drv_version was getting called after register_netdev. This was resulting in a race between set_drv_version and FLR called from open(). Moving set_drv_version before register_netdev avoids the race. o Log response code in error message on CDRP failure. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rajesh Borundia authored
o Aggregating tx stats in adapter variable was resulting in an increase in stats even after no traffic was run and user runs ifconfig/ethtool command. o qlcnic_update_stats used to accumulate stats in adapter struct at each function call, instead accumulate tx stats in local variable and then assign it to adapter structure. Reported-by: Holger Kiehl <holger.kiehl@dwd.de> Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Antonio Quartulli says: ==================== pull request net: batman-adv 2014-08-04 this is a pull request intended for net. It just contains a patch by Sven Eckelmann that fixes the reception of out-of-order fragments. As explained in the commit message, the issue was due to a wrong assumption about hlist_for_each_entry() in batadv_frag_insert_packet(). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sven Eckelmann authored
batadv_frag_insert_packet was unable to handle out-of-order packets because it dropped them directly. This is caused by the way the fragmentation lists is checked for the correct place to insert a fragmentation entry. The fragmentation code keeps the fragments in lists. The fragmentation entries are kept in descending order of sequence number. The list is traversed and each entry is compared with the new fragment. If the current entry has a smaller sequence number than the new fragment then the new one has to be inserted before the current entry. This ensures that the list is still in descending order. An out-of-order packet with a smaller sequence number than all entries in the list still has to be added to the end of the list. The used hlist has no information about the last entry in the list inside hlist_head and thus the last entry has to be calculated differently. Currently the code assumes that the iterator variable of hlist_for_each_entry can be used for this purpose after the hlist_for_each_entry finished. This is obviously wrong because the iterator variable is always NULL when the list was completely traversed. Instead the information about the last entry has to be stored in a different variable. This problem was introduced in 610bfc6b ("batman-adv: Receive fragmented packets and merge"). Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
-
- 03 Aug, 2014 1 commit
-
-
JF Le Fillatre authored
Add missing Makefile rule for r8152 driver In the current kernel the r8152 driver is *never* built because of a missing rule in drivers/net/Makefile, despite being selected as built-in or module in the .config file. There is no error message or warning to indicate that the driver isn't built. This change adds the rule and lets the driver build. Tested as built-in and module for 3.15.8. Signed-off by: JF Le Fillatre <jflf-kernel@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 02 Aug, 2014 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains Netfilter/IPVS fixes for your net tree, they are: 1) Maintain all DSCP and ECN bits for IPv6 tun forwarding. This resolves an inconsistency between IPv4 and IPv6 behaviour. Patch from Alex Gartrell via Simon Horman. 2) Fix unnoticeable blink in xt_LED when the led-always-blink option is used, from Jiri Prchal. 3) Add missing return in nft_del_setelem(), otherwise this results in a double call of nft_data_uninit() in the nf_tables code, from Thomas Graf. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hannes Frederic Sowa authored
Fixes: e110861f ("net: add a sysctl to reflect the fwmark on replies") Cc: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Oliver Neukum authored
This device needs to be reset to recover from a timeout. Unfortunately this can be handled only at the level of the subdrivers. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sasha Levin authored
Check for cases when the caller requests 0 bytes instead of running off and dereferencing potentially invalid iovecs. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 01 Aug, 2014 7 commits
-
-
Thomas Graf authored
nft_del_setelem() currently calls nft_data_uninit() twice on the same key. Once to release the key which is guaranteed to be NFT_DATA_VALUE and a second time in the error path to which it falls through. The second call has been harmless so far though because the type passed is always NFT_DATA_VALUE which is currently a no-op. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Vlad Yasevich authored
When performing segmentation, the mac_len value is copied right out of the original skb. However, this value is not always set correctly (like when the packet is VLAN-tagged) and we'll end up copying a bad value. One way to demonstrate this is to configure a VM which tags packets internally and turn off VLAN acceleration on the forwarding bridge port. The packets show up corrupt like this: 16:18:24.985548 52:54:00:ab:be:25 > 52:54:00:26:ce:a3, ethertype 802.1Q (0x8100), length 1518: vlan 100, p 0, ethertype 0x05e0, 0x0000: 8cdb 1c7c 8cdb 0064 4006 b59d 0a00 6402 ...|...d@.....d. 0x0010: 0a00 6401 9e0d b441 0a5e 64ec 0330 14fa ..d....A.^d..0.. 0x0020: 29e3 01c9 f871 0000 0101 080a 000a e833)....q.........3 0x0030: 000f 8c75 6e65 7470 6572 6600 6e65 7470 ...unetperf.netp 0x0040: 6572 6600 6e65 7470 6572 6600 6e65 7470 erf.netperf.netp 0x0050: 6572 6600 6e65 7470 6572 6600 6e65 7470 erf.netperf.netp 0x0060: 6572 6600 6e65 7470 6572 6600 6e65 7470 erf.netperf.netp ... This also leads to awful throughput as GSO packets are dropped and cause retransmissions. The solution is to set the mac_len using the values already available in then new skb. We've already adjusted all of the header offset, so we might as well correctly figure out the mac_len using skb_reset_mac_len(). After this change, packets are segmented correctly and performance is restored. CC: Eric Dumazet <edumazet@google.com> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
David Vrabel says: ==================== xen-netfront: more multiqueue fixes A few more xen-netfront fixes for the multiqueue support added in 3.16-rc1. It would be great if these could make it into 3.16 but I suspect it's a little late for that now. The second patch fixes a significant resource leak that prevents guests from migrating more than a handful of times. These have been tested by repeatedly migrating a guest over 250 times (it would previously fail with this guest after only 8 iterations). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Vrabel authored
When less than the requested number of queues could be created, include the actual number in the warning (instead of the requested number). Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Vrabel authored
Since netfront may reconnect to a backend with a different number of queues, all per-queue Rx and Tx resources (skbs and grant references) should be freed when disconnecting. Without this fix, the Tx and Rx grant refs are not released and netfront will exhaust them after only a few reconnections. netfront will fail to connect when no free grant references are available. Since all Rx bufs are freed and reallocated instead of reused this will add some additional delay to the reconnection but this is expected to be small compared to the time taken by any backend hotplug scripts etc. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Vrabel authored
If no queues could be created when connecting to the backend, one of the error paths would deadlock. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vlad Yasevich authored
Macvlan devices do not initialize vlan_features. As a result, any vlan devices configured on top of macvlans perform very poorly. Initialize vlan_features based on the vlan features of the lower-level device. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 31 Jul, 2014 5 commits
-
-
Toshiaki Makita authored
An FDB entry with vlan_id 0 doesn't mean it is used in vlan 0, but used when vlan_filtering is disabled. There is inconsistency around NDA_VLAN whose payload is 0 - even if we add an entry by RTM_NEWNEIGH without any NDA_VLAN, and even though adding an entry with NDA_VLAN 0 is prohibited, we get an entry with NDA_VLAN 0 by RTM_GETNEIGH. Dumping an FDB entry with vlan_id 0 shouldn't include NDA_VLAN. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Veaceslav Falico authored
Otherwise the name of the kobject isn't getting freed and other stuff from kobject_cleanup() isn't getting called. kobject_put() will call kobject_del() on its own in kobject_cleanup(). CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ivan Vecera authored
The recent commit "e29aa339 bna: Enable Multi Buffer RX" is causing a performance regression. It does not properly update 'cmpl' pointer at the end of the loop in NAPI handler bnad_cq_process(). The result is only one packet / per NAPI-schedule is processed. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Paasch authored
In vegas we do a multiplication of the cwnd and the rtt. This may overflow and thus their result is stored in a u64. However, we first need to cast the cwnd so that actually 64-bit arithmetic is done. Then, we need to do do_div to allow this to be used on 32-bit arches. Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Neal Cardwell <ncardwell@google.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Doug Leith <doug.leith@nuim.ie> Fixes: 8d3a564d (tcp: tcp_vegas cong avoid fix) Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Paasch authored
In veno we do a multiplication of the cwnd and the rtt. This may overflow and thus their result is stored in a u64. However, we first need to cast the cwnd so that actually 64-bit arithmetic is done. A first attempt at fixing 76f10177 ([TCP]: TCP Veno congestion control) was made by 15913114 (tcp: Overflow bug in Vegas), but it failed to add the required cast in tcp_veno_cong_avoid(). Fixes: 76f10177 ([TCP]: TCP Veno congestion control) Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 30 Jul, 2014 12 commits
-
-
Dmitry Popov authored
Ipv4 tunnels created with "local any remote $ip" didn't work properly since 7d442fab (ipv4: Cache dst in tunnels). 99% of packets sent via those tunnels had src addr = 0.0.0.0. That was because only dst_entry was cached, although fl4.saddr has to be cached too. Every time ip_tunnel_xmit used cached dst_entry (tunnel_rtable_get returned non-NULL), fl4.saddr was initialized with tnl_params->saddr (= 0 in our case), and wasn't changed until iptunnel_xmit(). This patch adds saddr to ip_tunnel->dst_cache, fixing this issue. Reported-by: Sergey Popov <pinkbyte@gentoo.org> Signed-off-by: Dmitry Popov <ixaphire@qrator.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ivan Vecera authored
A driver should fill magic field of ethtool_eeprom struct in .get_eeprom and validate it in .set_eeprom. The bna incorrectly validates it in both and this makes its .get_eeprom interface unusable. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.secretlab.ca/git/linuxLinus Torvalds authored
Pull Exynos platform DT fix from Grant Likely: "Device tree Exynos bug fix for v3.16-rc7 This bug fix has been brewing for a while. I hate sending it to you so late, but I only got confirmation that it solves the problem this past weekend. The diff looks big for a bug fix, but the majority of it is only executed in the Exynos quirk case. Unfortunately it required splitting early_init_dt_scan() in two and adding quirk handling in the middle of it on ARM. Exynos has buggy firmware that puts bad data into the memory node. Commit 1c2f87c2 ("ARM: Get rid of meminfo") exposed the bug by dropping the artificial upper bound on the number of memory banks that can be added. Exynos fails to boot after that commit. This branch fixes it by splitting the early DT parse function and inserting a fixup hook. Exynos uses the hook to correct the DT before parsing memory regions" * tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux: arm: Add devicetree fixup machine function of: Add memory limiting function for flattened devicetrees of: Split early_init_dt_scan into two parts
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull Xen fix from David Vrabel: "Fix BUG when trying to expand the grant table. This seems to occur often during boot with Ubuntu 14.04 PV guests" * tag 'stable/for-linus-3.16-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/xen: safely map and unmap grant frames when in atomic context
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fix from Paolo Bonzini: "Fix a bug which allows KVM guests to bring down the entire system on some 64K enabled ARM64 hosts" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: arm64: vgic: fix hyp panic with 64k pages on juno platform
-
Linus Torvalds authored
This reverts commit 20fbe3ae. As reported by Stephen Rothwell, it causes compile failures in certain configurations: drivers/net/usb/cdc_subset.c:360:15: error: 'dummy_prereset' undeclared here (not in a function) .pre_reset = dummy_prereset, ^ drivers/net/usb/cdc_subset.c:361:16: error: 'dummy_postreset' undeclared here (not in a function) .post_reset = dummy_postreset, ^ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: David Miller <davem@davemloft.net> Cc: Oliver Neukum <oneukum@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Make fragmentation IDs less predictable, from Eric Dumazet. 2) TSO tunneling can crash in bnx2x driver, fix from Dmitry Kravkov. 3) Don't allow NULL msg->msg_name just because msg->msg_namelen is non-zero, from Andrey Ryabinin. 4) ndm->ndm_type set using wrong macros, from Jun Zhao. 5) cdc-ether devices can come up with entries in their address filter, so explicitly clear the filter after the device initializes. From Oliver Neukum. 6) Forgotten refcount bump in xfrm_lookup(), from Steffen Klassert. 7) Short packets not padded properly, exposing random data, in bcmgenet driver. Fix from Florian Fainelli. 8) xgbe_probe() doesn't return an error code, but rather zero, when netif_set_real_num_tx_queues() fails. Fix from Wei Yongjun. 9) USB speed not probed properly in r8152 driver, from Hayes Wang. 10) Transmit logic choosing the outgoing port in the sunvnet driver needs to consider a) is the port actually up and b) whether it is a switch port. Fix from David L Stevens. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits) net: phy: re-apply PHY fixups during phy_register_device cdc-ether: clean packet filter upon probe cdc_subset: deal with a device that needs reset for timeout net: sendmsg: fix NULL pointer dereference isdn/bas_gigaset: fix a leak on failure path in gigaset_probe() ip: make IP identifiers less predictable neighbour : fix ndm_type type error issue sunvnet: only use connected ports when sending can: c_can_platform: Fix raminit, use devm_ioremap() instead of devm_ioremap_resource() bnx2x: fix crash during TSO tunneling r8152: fix the checking of the usb speed net: phy: Ensure the MDIO bus module is held net: phy: Set the driver when registering an MDIO bus device bnx2x: fix set_setting for some PHYs hyperv: Fix error return code in netvsc_init_buf() amd-xgbe: Fix error return code in xgbe_probe() ath9k: fix aggregation session lockup net: bcmgenet: correctly pad short packets net: sctp: inherit auth_capable on INIT collisions mac80211: fix crash on getting sta info with uninitialized rate control ...
-
David Vrabel authored
arch_gnttab_map_frames() and arch_gnttab_unmap_frames() are called in atomic context but were calling alloc_vm_area() which might sleep. Also, if a driver attempts to allocate a grant ref from an interrupt and the table needs expanding, then the CPU may already by in lazy MMU mode and apply_to_page_range() will BUG when it tries to re-enable lazy MMU mode. These two functions are only used in PV guests. Introduce arch_gnttab_init() to allocates the virtual address space in advance. Avoid the use of apply_to_page_range() by using saving and using the array of PTE addresses from the alloc_vm_area() call (which ensures that the required page tables are pre-allocated). Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
Will Deacon authored
If the physical address of GICV isn't page-aligned, then we end up creating a stage-2 mapping of the page containing it, which causes us to map neighbouring memory locations directly into the guest. As an example, consider a platform with GICV at physical 0x2c02f000 running a 64k-page host kernel. If qemu maps this into the guest at 0x80010000, then guest physical addresses 0x80010000 - 0x8001efff will map host physical region 0x2c020000 - 0x2c02efff. Accesses to these physical regions may cause UNPREDICTABLE behaviour, for example, on the Juno platform this will cause an SError exception to EL3, which brings down the entire physical CPU resulting in RCU stalls / HYP panics / host crashing / wasted weeks of debugging. SBSA recommends that systems alias the 4k GICV across the bounding 64k region, in which case GICV physical could be described as 0x2c020000 in the above scenario. This patch fixes the problem by failing the vgic probe if the physical base address or the size of GICV aren't page-aligned. Note that this generated a warning in dmesg about freeing enabled IRQs, so I had to move the IRQ enabling later in the probe. Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Joel Schopp <joel.schopp@amd.com> Cc: Don Dutile <ddutile@redhat.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Joel Schopp <joel.schopp@amd.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
-
Laura Abbott authored
Commit 1c2f87c2 (ARM: 8025/1: Get rid of meminfo) dropped the upper bound on the number of memory banks that can be added as there was no technical need in the kernel. It turns out though, some bootloaders (specifically the arndale-octa exynos boards) may pass invalid memory information and rely on the kernel to not parse this data. This is a bug in the bootloader but we still need to work around this. Work around this by introducing a dt_fixup function. This function gets called before the flattened devicetree is scanned for memory and the like. In this fixup function for exynos, limit the maximum number of memory regions in the devicetree. Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Tested-by: Andreas Färber <afaerber@suse.de> [glikely: Added a comment and fixed up function name] Signed-off-by: Grant Likely <grant.likely@linaro.org>
-
Laura Abbott authored
Buggy bootloaders may pass bogus memory entries in the devicetree. Add of_fdt_limit_memory to add an upper bound on the number of entries that can be present in the devicetree. Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Tested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Grant Likely <grant.likely@linaro.org>
-
Laura Abbott authored
Currently, early_init_dt_scan validates the header, sets the boot params, and scans for chosen/memory all in one function. Split this up into two separate functions (validation/setting boot params in one, scanning in another) to allow for additional setup between boot params and scanning the memory. Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Tested-by: Andreas Färber <afaerber@suse.de> [glikely: s/early_init_dt_scan_all/early_init_dt_scan_nodes/] Signed-off-by: Grant Likely <grant.likely@linaro.org>
-
- 29 Jul, 2014 6 commits
-
-
Florian Fainelli authored
Commit 87aa9f9c ("net: phy: consolidate PHY reset in phy_init_hw()") moved the call to phy_scan_fixups() in phy_init_hw() after a software reset is performed. By the time phy_init_hw() is called in phy_device_register(), no driver has been bound to this PHY yet, so all the checks in phy_init_hw() against the PHY driver and the PHY driver's config_init function will return 0. We will therefore never call phy_scan_fixups() as we should. Fix this by calling phy_scan_fixups() and check for its return value to restore the intended functionality. This broke PHY drivers which do register an early PHY fixup callback to intercept the PHY probing and do things like changing the 32-bits unique PHY identifier when a pseudo-PHY address has been used, as well as board-specific PHY fixups that need to be applied during driver probe time. Reported-by: Hauke Merthens <hauke-m@hauke-m.de> Reported-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Oliver Neukum authored
There are devices that don't do reset all the way. So the packet filter should be set to a sane initial value. Failure to do so leads to intermittent failures of DHCP on some systems under some conditions. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Oliver Neukum authored
This device needs to be reset to recover from a timeout. Unfortunately this can be handled only at the level of the subdrivers. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrey Ryabinin authored
Sasha's report: > While fuzzing with trinity inside a KVM tools guest running the latest -next > kernel with the KASAN patchset, I've stumbled on the following spew: > > [ 4448.949424] ================================================================== > [ 4448.951737] AddressSanitizer: user-memory-access on address 0 > [ 4448.952988] Read of size 2 by thread T19638: > [ 4448.954510] CPU: 28 PID: 19638 Comm: trinity-c76 Not tainted 3.16.0-rc4-next-20140711-sasha-00046-g07d3099-dirty #813 > [ 4448.956823] ffff88046d86ca40 0000000000000000 ffff880082f37e78 ffff880082f37a40 > [ 4448.958233] ffffffffb6e47068 ffff880082f37a68 ffff880082f37a58 ffffffffb242708d > [ 4448.959552] 0000000000000000 ffff880082f37a88 ffffffffb24255b1 0000000000000000 > [ 4448.961266] Call Trace: > [ 4448.963158] dump_stack (lib/dump_stack.c:52) > [ 4448.964244] kasan_report_user_access (mm/kasan/report.c:184) > [ 4448.965507] __asan_load2 (mm/kasan/kasan.c:352) > [ 4448.966482] ? netlink_sendmsg (net/netlink/af_netlink.c:2339) > [ 4448.967541] netlink_sendmsg (net/netlink/af_netlink.c:2339) > [ 4448.968537] ? get_parent_ip (kernel/sched/core.c:2555) > [ 4448.970103] sock_sendmsg (net/socket.c:654) > [ 4448.971584] ? might_fault (mm/memory.c:3741) > [ 4448.972526] ? might_fault (./arch/x86/include/asm/current.h:14 mm/memory.c:3740) > [ 4448.973596] ? verify_iovec (net/core/iovec.c:64) > [ 4448.974522] ___sys_sendmsg (net/socket.c:2096) > [ 4448.975797] ? put_lock_stats.isra.13 (./arch/x86/include/asm/preempt.h:98 kernel/locking/lockdep.c:254) > [ 4448.977030] ? lock_release_holdtime (kernel/locking/lockdep.c:273) > [ 4448.978197] ? lock_release_non_nested (kernel/locking/lockdep.c:3434 (discriminator 1)) > [ 4448.979346] ? check_chain_key (kernel/locking/lockdep.c:2188) > [ 4448.980535] __sys_sendmmsg (net/socket.c:2181) > [ 4448.981592] ? trace_hardirqs_on_caller (kernel/locking/lockdep.c:2600) > [ 4448.982773] ? trace_hardirqs_on (kernel/locking/lockdep.c:2607) > [ 4448.984458] ? syscall_trace_enter (arch/x86/kernel/ptrace.c:1500 (discriminator 2)) > [ 4448.985621] ? trace_hardirqs_on_caller (kernel/locking/lockdep.c:2600) > [ 4448.986754] SyS_sendmmsg (net/socket.c:2201) > [ 4448.987708] tracesys (arch/x86/kernel/entry_64.S:542) > [ 4448.988929] ================================================================== This reports means that we've come to netlink_sendmsg() with msg->msg_name == NULL and msg->msg_namelen > 0. After this report there was no usual "Unable to handle kernel NULL pointer dereference" and this gave me a clue that address 0 is mapped and contains valid socket address structure in it. This bug was introduced in f3d33426 (net: rework recvmsg handler msg_name and msg_namelen logic). Commit message states that: "Set msg->msg_name = NULL if user specified a NULL in msg_name but had a non-null msg_namelen in verify_iovec/verify_compat_iovec. This doesn't affect sendto as it would bail out earlier while trying to copy-in the address." But in fact this affects sendto when address 0 is mapped and contains socket address structure in it. In such case copy-in address will succeed, verify_iovec() function will successfully exit with msg->msg_namelen > 0 and msg->msg_name == NULL. This patch fixes it by setting msg_namelen to 0 if msg_name == NULL. Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Eric Dumazet <edumazet@google.com> Cc: <stable@vger.kernel.org> Reported-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexey Khoroshilov authored
There is a lack of usb_put_dev(udev) on failure path in gigaset_probe(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Arnd Bergmann: "A nice small set of bug fixes for arm-soc: - two incorrect register addresses in DT files on shmobile and hisilicon - one revert for a regression on omap - one bug fix for a newly introduced pin controller binding - one regression fix for the memory controller on omap - one patch to avoid a harmless WARN_ON" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: Revert enabling of twl configuration for n900 ARM: dts: fix L2 address in Hi3620 ARM: OMAP2+: gpmc: fix gpmc_hwecc_bch_capable() pinctrl: dra: dt-bindings: Fix pull enable/disable ARM: shmobile: r8a7791: Fix SD2CKCR register address ARM: OMAP2+: l2c: squelch warning dump on power control setting
-